code that emit target specific nodes into emit functions that are uniquified
and shared among selection routines.
e.g. This reduces X86ISelDAGToDAG.o (release) from ~2M to ~1.5M. Stack frame
size of Select_store from ~13k down to ~8k.
This is the first step. Further work to enable more sharing will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29158 91177308-0d34-0410-b5e6-96231b3b80d8
RemoveInFlightSetEntry. They are used in place of direct set operators to
reduce instruction selection function stack size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28987 91177308-0d34-0410-b5e6-96231b3b80d8
because information about one can help refine the other. This allows us to
write:
def : Pat<(i32 (extload xaddr:$src, i8)),
(LBZX xaddr:$src)>;
as:
def : Pat<(extload xaddr:$src, i8),
(LBZX xaddr:$src)>;
because tblgen knows LBZX returns i32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28865 91177308-0d34-0410-b5e6-96231b3b80d8
instruction, and the result type of the instruction to refine the pattern.
This allows us to write things like this:
def : Pat<(v2i64 (bitconvert (v16i8 VR128:$src))), (v2i64 VR128:$src)>;
as:
def : Pat<(v2i64 (bitconvert (v16i8 VR128:$src))), (VR128:$src)>
and fixes a ppc64 issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28863 91177308-0d34-0410-b5e6-96231b3b80d8
a cycle. This increase the search space and will increase compile time (in
practice it appears to be small, e.g. 176.gcc goes from 62 sec to 65 sec)
that will be addressed later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28476 91177308-0d34-0410-b5e6-96231b3b80d8
correctly. That is causing non-deterministic behavior (and possibly preventing
some load folding from happening).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28458 91177308-0d34-0410-b5e6-96231b3b80d8
patterns that look like this:
def : Pat<(i32 (X86Wrapper tconstpool :$dst)), (MOV32ri tconstpool :$dst)>;
InsertOneTypeCheck should copy the type from the resolved pattern to the
unresolved one as long as there types are different.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28389 91177308-0d34-0410-b5e6-96231b3b80d8
1. Use expects a chain output.
2. Node is expanded into multiple target ops.
3. One of the inner node produces a chain, the outer most one doesn't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28209 91177308-0d34-0410-b5e6-96231b3b80d8
nodes should not be folded into other nodes.
This fixes the miscompilation of PR 749.
Temporarily under flag control.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28002 91177308-0d34-0410-b5e6-96231b3b80d8
x86 and ppc for 100% dense switch statements when relocations are non-PIC.
This support will be extended and enhanced in the coming days to support
PIC, and less dense forms of jump tables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27947 91177308-0d34-0410-b5e6-96231b3b80d8
tblgen: In STVEBX: Intrinsic 'llvm.ppc.altivec.stvebx' expects 3 operands, not 2 operands!
instead of like this:
tblgen: In STVEBX: Intrinsic 'intrinsic_void expects 3 operands, not 2 operands!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27185 91177308-0d34-0410-b5e6-96231b3b80d8
intrinsics that don't take pointer arguments now work. For example, we can
compile this:
int test3( __m128d *A) {
return _mm_movemask_pd(*A);
}
int test4( __m128 *A) {
return _mm_movemask_ps(*A);
}
to this:
_test3:
movl 4(%esp), %eax
movapd (%eax), %xmm0
movmskpd %xmm0, %eax
ret
_test4:
movl 4(%esp), %eax
movaps (%eax), %xmm0
movmskps %xmm0, %eax
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@27090 91177308-0d34-0410-b5e6-96231b3b80d8
The instruction patterns do not contain enough information to resolve the
exact type of the destination if it of a generic vector type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26892 91177308-0d34-0410-b5e6-96231b3b80d8
it possible when a TokenFactor is between the load and store. But is still
missing some cases due to ordering issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26638 91177308-0d34-0410-b5e6-96231b3b80d8
if (N1.getOpcode() == ISD::ADD &&
...)
if (... &&
(N1.getNumOperands() == 1 || !isNonImmUse(N1.Val, N10.Val))) &&
...)
TableGen knows N1 must have more than one operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@26592 91177308-0d34-0410-b5e6-96231b3b80d8
due to ordering issue. i.e. they were selected for chain use first.
Now at load select time, check if it is being selected for a chain use and if
it has only a single real use. If so, return a HANDLENODE (with the load as
its operand) in its place and record it.
When it is folded or the load is selected for a real use, the isel records it
as the replacement for the HANDLENODE. The replacement is done when all nodes
are selected.
This scheme exposed a couple of problems where cycles can happen. (See comments
in EmitMatchCode() for descriptions of the problems and their workaround /
solutions.) These problems have been resolved with a small compile time
penality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25995 91177308-0d34-0410-b5e6-96231b3b80d8
X86 backend attempts to match small-immediate versions of instructions before
the full size immediate versions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25937 91177308-0d34-0410-b5e6-96231b3b80d8
Chain is initially set to the chain operand of store node, when it reaches
load, if it matches the load then Chain is set to the chain operand of the
load.
However, if the matching code that follows this fails, isel moves on to the
next pattern but it does not restore Chain to the chain operand of the store.
So when it tries to match the next store / op / load pattern it would fail on
the Chain == load.getOperand(0) test.
The solution is for each chain operand to get a unique name. e.g. Chain10.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25931 91177308-0d34-0410-b5e6-96231b3b80d8
"if" statements (indenting it appropriately, of course) instead of using goto's.
This inverts the logic for all of the if statements, which makes things simpler
to understand in addition to making the generated code easier to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25757 91177308-0d34-0410-b5e6-96231b3b80d8
directly to the output file. This makes things simple because the code doesn't
have to worry about indentation or the case when there is no goto. It also
allows us to indent the code better without touching everything :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25756 91177308-0d34-0410-b5e6-96231b3b80d8
If store's chain operand is load, then use load's chain operand instead. If
it isn't (likely a TokenFactor), then do not allow the folding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25708 91177308-0d34-0410-b5e6-96231b3b80d8
has already been selected. The number of use check is not strong enough since
a node can be replaced with newly created target node. e.g. If the original
node has two uses, when it is selected for one of the uses it is replaced with
another. Each node now has a single use but isel still should not fold it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25651 91177308-0d34-0410-b5e6-96231b3b80d8
instruction to produce a result. e.g MUL8m, the instruction does not
produce a explicit result. However it produces an implicit result in
AL which would be copied to a temp. The root operator of the matching
pattern is a mul so the use would expect it to produce a result.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25458 91177308-0d34-0410-b5e6-96231b3b80d8
SNDPOutFlag to DAG nodes. These properties do not belong to target specific
instructions.
* Added DAG node property SNDPOptInFlag. It's same as SNDPInFlag except it's
optional. Used by ret / call, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25154 91177308-0d34-0410-b5e6-96231b3b80d8
SDOperand Tmp0,Tmp1,Tmp2,Tmp3,;
GCC has a bug (24907) in which is fails to catch this, but VC++ correctly
notes its illegality, so tblgen must be taught to only generate legal C++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25075 91177308-0d34-0410-b5e6-96231b3b80d8
Currently tblgen cannot tell which operands in the operand list are results so
it assumes the first one is a result. This is bad. Ideally we would fix this
by separating results from inputs, e.g. (res R32:$dst),
(ops R32:$src1, R32:$src2). But that's a more distruptive change. Adding
'let noResults = 1' is the workaround to tell tblgen that the instruction does
not produces a result. It works for now since tblgen does not support
instructions which produce multiple results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25017 91177308-0d34-0410-b5e6-96231b3b80d8
use too much stack space, overflowing the stack for large functions. Instead
of emitting new SDOperands in each match block, we emit some common ones at
the top of SelectCode then reuse them when possible.
This reduces the stack size of SelectCode from 28K to 21K. Note that GCC
compiles it to 512 bytes :-/
I've filed GCC PR 25505 to track this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24882 91177308-0d34-0410-b5e6-96231b3b80d8
if (!N.Val->hasOneUse()) {
std::map<SDOperand, SDOperand>::iterator CGMI = CodeGenMap.find(N);
if (CGMI != CodeGenMap.end()) return CGMI->second;
}
Suppose a DAG like this:
X
^ ^
/ \
USE1 USE2
Suppose USE1 is being selected first and during which X is selected and
returned a new node. After this, USE1 is no longer an use of X. During USE2
selection, X will be selected again since it has only one use!
The fix is to always query CodeGenMap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24679 91177308-0d34-0410-b5e6-96231b3b80d8
it has more than one real use (non-chain uses).
* Record folded chain producing node in CodeGenMap.
* Do not fold a chain producing node if it has already been selected as an
operand of a chain use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24647 91177308-0d34-0410-b5e6-96231b3b80d8
matching code that is not currently auto-generated by tblgen, e.g. X86
addressing mode. Selection routines for complex patterns can return multiple operands, e.g. X86 addressing mode returns 4.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24634 91177308-0d34-0410-b5e6-96231b3b80d8
* Enhanced tblgen to handle instructions which have chain operand and writes a
chain result.
* Enhanced tblgen to handle instructions which produces no results. Part of
the change is a temporary hack which relies on instruction property (e.g.
isReturn, isBranch). The proper fix would be to change the .td syntax to
separate results dag from ops dag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24587 91177308-0d34-0410-b5e6-96231b3b80d8
def SHL8rCL : I<0xD2, MRM4r, (ops R8 :$dst, R8 :$src),
"shl{b} {%cl, $dst|$dst, %CL}",
[(set R8:$dst, (shl R8:$src, CL))]>, Imp<[CL],[]>;
This generates a CopyToReg operand and added its 2nd result to the shl as
a flag operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24557 91177308-0d34-0410-b5e6-96231b3b80d8
ValueType from the RegisterClass or Operands. This step is necessary to
allow RegisterClasses to have multiple ValueTypes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@24555 91177308-0d34-0410-b5e6-96231b3b80d8
