Commit Graph

31 Commits

Author SHA1 Message Date
Dan Gohman
864e2efce2 Remove the target hook TargetInstrInfo::BlockHasNoFallThrough in favor of
MachineBasicBlock::canFallThrough(), which is target-independent and more
thorough.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@90634 91177308-0d34-0410-b5e6-96231b3b80d8
2009-12-05 00:44:40 +00:00
Evan Cheng
fdc834046e Refactor code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86423 91177308-0d34-0410-b5e6-96231b3b80d8
2009-11-08 00:15:23 +00:00
Jim Grosbach
31c24bf5b3 80-column cleanup of file header comments
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86408 91177308-0d34-0410-b5e6-96231b3b80d8
2009-11-07 22:00:39 +00:00
Evan Cheng
bf992817f2 t2ldrpci_pic can be used for blockaddress as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86400 91177308-0d34-0410-b5e6-96231b3b80d8
2009-11-07 19:40:04 +00:00
Evan Cheng
b9803a8fa6 - Add pseudo instructions tLDRpci_pic and t2LDRpci_pic which does a pc-relative
load of a GV from constantpool and then add pc. It allows the code sequence to
  be rematerializable so it would be hoisted by machine licm.
- Add a late pass to break these pseudo instructions into a number of real
  instructions. Also move the code in Thumb2 IT pass that breaks up t2MOVi32imm
  to this pass. This is done before post regalloc scheduling to allow the
  scheduler to proper schedule these instructions. It also allow them to be
  if-converted and shrunk by later passes.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@86304 91177308-0d34-0410-b5e6-96231b3b80d8
2009-11-06 23:52:48 +00:00
Anton Korobeynikov
f95215f551 Use NEON reg-reg moves, where profitable. This reduces "domain-cross" stalls, when we used to mix vfp and neon code (the former were used for reg-reg moves)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85764 91177308-0d34-0410-b5e6-96231b3b80d8
2009-11-02 00:10:38 +00:00
Evan Cheng
e3ce8aab0a Fix a couple more places where we are creating ld / st instructions without memoperands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85746 91177308-0d34-0410-b5e6-96231b3b80d8
2009-11-01 22:04:35 +00:00
Bob Wilson
8d4de5abfa Add a Thumb BRIND pattern. Change the ARM BRIND assembly to separate the
opcode and operand with a tab.  Check for these instructions in the usual
places.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85411 91177308-0d34-0410-b5e6-96231b3b80d8
2009-10-28 18:26:41 +00:00
Evan Cheng
892597943a Forgot about ARM::tPUSH. It also has a new writeback operand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83237 91177308-0d34-0410-b5e6-96231b3b80d8
2009-10-02 05:03:07 +00:00
Evan Cheng
10469f8e48 ARM::tPOP and tPOP_RET each has an extra writeback operand now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83214 91177308-0d34-0410-b5e6-96231b3b80d8
2009-10-01 20:54:53 +00:00
Evan Cheng
86e5f7b6f8 It's ok to spill a tGPR register as long as it's still allocated a low register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78893 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-13 05:40:51 +00:00
Evan Cheng
4b322e58b7 Shrinkify Thumb2 load / store multiple instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78717 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-11 21:11:32 +00:00
Chris Lattner
d90183d25d Move the getInlineAsmLength virtual method from TAI to TII, where
the only real caller (GetFunctionSizeInBytes) uses it.

The custom ARM implementation of this is basically reimplementing
an assembler poorly for negligible gain.  It should be removed 
IMNSHO, but I'll leave that to ARMish folks to decide.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77877 91177308-0d34-0410-b5e6-96231b3b80d8
2009-08-02 05:20:37 +00:00
Evan Cheng
6495f63945 - More refactoring. This gets rid of all of the getOpcode calls.
- This change also makes it possible to switch between ARM / Thumb on a
  per-function basis.
- Fixed thumb2 routine which expand reg + arbitrary immediate. It was using
  using ARM so_imm logic.
- Use movw and movt to do reg + imm when profitable.
- Other code clean ups and minor optimizations.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77300 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-28 05:48:47 +00:00
Evan Cheng
e0f21bd47f More DCE.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77231 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-27 18:48:45 +00:00
Evan Cheng
fc17fb0aee Get rid of more dead code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77227 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-27 18:38:54 +00:00
Evan Cheng
5ca53a7ad8 Get rid of some more getOpcode calls.
This also fixes potential problems in ARMBaseInstrInfo routines not recognizing thumb1 instructions when 32-bit and 16-bit instructions mix.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77218 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-27 18:20:05 +00:00
Evan Cheng
5732ca084a Use t2LDRi12 and t2STRi12 to load / store to / from stack frames. Eliminate more getOpcode calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77181 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-27 03:14:20 +00:00
Evan Cheng
dced03fc84 Merge isLoadFromStackSlot into one since it behaves the same regardless of sub-target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77174 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-27 00:24:36 +00:00
Evan Cheng
68e3c6ae49 Just use a single isMoveInstr to catch all the cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77173 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-27 00:05:15 +00:00
Evan Cheng
d83360694a Rename tMOVhi2lor to tMOVgpr2tgpr. It's not moving from a high register to a low register. It's moving from a GPR register class to a more restrictive tGPR class. Also change tMOVlor2hir, and tMOVhir2hir.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77172 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-26 23:59:01 +00:00
Evan Cheng
66ac53165e Change Thumb2 jumptable codegen to one that uses two level jumps:
Before:
      adr r12, #LJTI3_0_0
      ldr pc, [r12, +r0, lsl #2]
LJTI3_0_0:
      .long    LBB3_24
      .long    LBB3_30
      .long    LBB3_31
      .long    LBB3_32

After:
      adr r12, #LJTI3_0_0
      add pc, r12, +r0, lsl #2
LJTI3_0_0:
      b.w    LBB3_24
      b.w    LBB3_30
      b.w    LBB3_31
      b.w    LBB3_32

This has several advantages.
1. This will make it easier to optimize this to a TBB / TBH instruction +
   (smaller) table.
2. This eliminate the need for ugly asm printer hack to force the address
   into thumb addresses (bit 0 is one).
3. Same codegen for pic and non-pic.
4. This eliminate the need to align the table so constantpool island pass
   won't have to over-estimate the size.

Based on my calculation, the later is probably slightly faster as well since
ldr pc with shifter address is very slow. That is, it should be a win as long
as the HW implementation can do a reasonable job of branch predict the second
branch.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77024 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-25 00:33:29 +00:00
Eli Friedman
23ed52752b Remove unused member functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76960 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-24 07:43:59 +00:00
Evan Cheng
b74bb1a7a4 FLDD, FLDS, FCPYD, FCPYS, FSTD, FSTS, VMOVD, VMOVQ maps to the same instructions on all sub-targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76925 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-24 00:53:56 +00:00
David Goodwin
5ff58b5c3a Correctly handle the Thumb-2 imm8 addrmode. Specialize frame index elimination more exactly for Thumb-2 to get better code gen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76919 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-24 00:16:18 +00:00
David Goodwin
b53cc014d0 Fix frame index elimination to correctly handle thumb-2 addressing modes that don't allow negative offsets. During frame elimination convert *i12 opcode to a *i8 when necessary due to a negative offset.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76883 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-23 17:06:46 +00:00
Anton Korobeynikov
b8e9ac834a Emit cross regclass register moves for thumb2.
Minor code duplication cleanup.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@76124 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-16 23:26:06 +00:00
Evan Cheng
446c428bf3 Major changes to Thumb (not Thumb2). Many 16-bit instructions either modifies CPSR when they are outside the IT blocks, or they can predicated when in Thumb2. Move the implicit def of CPSR to an optional def which defaults CPSR. This allows the 's' bit to be toggled dynamically.
A side-effect of this change is asm printer is now using unified assembly. There are some minor clean ups and fixes as well.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75359 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-11 06:43:01 +00:00
David Goodwin
77521f5232 Generalize opcode selection in ARMBaseRegisterInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75036 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-08 20:28:28 +00:00
David Goodwin
334c26473b Checkpoint Thumb2 Instr info work. Generalized base code so that it can be shared between ARM and Thumb2. Not yet activated because register information must be generalized first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75010 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-08 16:09:28 +00:00
David Goodwin
b50ea5c48f Checkpoint refactoring of ThumbInstrInfo and ThumbRegisterInfo into Thumb1InstrInfo, Thumb2InstrInfo, Thumb1RegisterInfo and Thumb2RegisterInfo. Move methods from ARMInstrInfo to ARMBaseInstrInfo to prepare for sharing with Thumb2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74731 91177308-0d34-0410-b5e6-96231b3b80d8
2009-07-02 22:18:33 +00:00