Add MachO 32-bit (i.e. arm and x86) support for replacing global GOT equivalent
symbol accesses. Unlike 64-bit targets, there's no GOTPCREL relocation, and
access through a non_lazy_symbol_pointers section is used instead.
-- before
_extgotequiv:
.long _extfoo
_delta:
.long _extgotequiv-_delta
-- after
_delta:
.long L_extfoo$non_lazy_ptr-_delta
.section __IMPORT,__pointers,non_lazy_symbol_pointers
L_extfoo$non_lazy_ptr:
.indirect_symbol _extfoo
.long 0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231475 91177308-0d34-0410-b5e6-96231b3b80d8
Follow up r230264 and add ARM64 support for replacing global GOT
equivalent symbol accesses by references to the GOT entry for the final
symbol instead, example:
-- before
.globl _foo
_foo:
.long 42
.globl _gotequivalent
_gotequivalent:
.quad _foo
.globl _delta
_delta:
.long _gotequivalent-_delta
-- after
.globl _foo
_foo:
.long 42
.globl _delta
Ltmp3:
.long _foo@GOT-Ltmp3
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231474 91177308-0d34-0410-b5e6-96231b3b80d8
This pass interchanges loops to provide a more cache-friendly memory access.
For e.g. given a loop like -
for(int i=0;i<N;i++)
for(int j=0;j<N;j++)
A[j][i] = A[j][i]+B[j][i];
is interchanged to -
for(int j=0;j<N;j++)
for(int i=0;i<N;i++)
A[j][i] = A[j][i]+B[j][i];
This pass is currently disabled by default.
To give a brief introduction it consists of 3 stages-
LoopInterchangeLegality : Checks the legality of loop interchange based on Dependency matrix.
LoopInterchangeProfitability: A very basic heuristic has been added to check for profitibility. This will evolve over time.
LoopInterchangeTransform : Which does the actual transform.
LNT Performance tests shows improvement in Polybench/linear-algebra/kernels/mvt and Polybench/linear-algebra/kernels/gemver becnmarks.
TODO:
1) Add support for reductions and lcssa phi.
2) Improve profitability model.
3) Improve loop selection algorithm to select best loop for interchange. Currently the innermost loop is selected for interchange.
4) Improve compile time regression found in llvm lnt due to this pass.
5) Fix issues in Dependency Analysis module.
A special thanks to Hal for reviewing this code.
Review: http://reviews.llvm.org/D7499
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231458 91177308-0d34-0410-b5e6-96231b3b80d8
We would set the body of a struct type (therefore making it non-opaque)
but were forgetting to move it to the non-opaque set.
Fixes pr22807.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231442 91177308-0d34-0410-b5e6-96231b3b80d8
The copies already diverged, don't let them become any worse. Reduce
redundancy in code with a little macro metaprogramming.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231401 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Teach SCEV to prove no overflow for an add recurrence by proving
something about the range of another add recurrence a loop-invariant
distance away from it.
Reviewers: atrick, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7980
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231305 91177308-0d34-0410-b5e6-96231b3b80d8
The implementation accepts explicitely signed forms (DW_FORM_sdata),
but also unsigned forms as long as they fit in an int64_t.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231299 91177308-0d34-0410-b5e6-96231b3b80d8
When calling lock() after all passes are registered, the PassRegistry doesn't need a mutex anymore to look up passes.
This speeds up multithreaded llvm execution by ~5% (tested with 4 threads).
In an asserts build of llvm this has an even bigger impact.
Note that it's not required to use the lock function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231276 91177308-0d34-0410-b5e6-96231b3b80d8
Reverted in r231254 due to a self-hosting crash of Clang (see Clang
PR22793). Workaround the crash by using {} instead of = default to
define a dtor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231274 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231270 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In PNaCl, most atomic instructions have their own @llvm.nacl.atomic.* function, each one, with a few exceptions, represents a consistent behaviour across all NaCl-supported targets. Unfortunately, the atomic RMW operations nand, [u]min, and [u]max aren't directly represented by any such @llvm.nacl.atomic.* function. This patch refines shouldExpandAtomicRMWInIR in TargetLowering so that a future `Le32TargetLowering` class can selectively inform the caller how the target desires the atomic RMW instruction to be expanded (ie via load-linked/store-conditional for ARM/AArch64, via cmpxchg for X86/others?, or not at all for Mips) if at all.
This does not represent a behavioural change and as such no tests were added.
Patch by: Richard Diamond.
Reviewers: jfb
Reviewed By: jfb
Subscribers: jfb, aemerson, t.p.northover, llvm-commits
Differential Revision: http://reviews.llvm.org/D7713
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231250 91177308-0d34-0410-b5e6-96231b3b80d8
Asserting that the source and destination iterators are from the same
region is unnecessary - there's no reason to disallow reassignment from
any regions, so long as they aren't compared.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231224 91177308-0d34-0410-b5e6-96231b3b80d8
Since OptionValue (& its base classes) have user-declared dtors, use of
the implicit copy ctor/assignment operator is deprecated in C++11.
Provide them explicitly (defaulted) to avoid depending on this
deprecated feature.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231218 91177308-0d34-0410-b5e6-96231b3b80d8
These objects are never polymorphically owned, so there's no need for
virtual dtors - just make the dtor protected in the base classes, and
make the derived classes final.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231217 91177308-0d34-0410-b5e6-96231b3b80d8
This will now display enum definitions both at the global
scope as well as nested inside of classes. Additionally,
it will no longer display enums at the global scope if the
enum is nested. Instead, it will omit the definition of
the enum globally and instead emit it in the corresponding
class definition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231215 91177308-0d34-0410-b5e6-96231b3b80d8
(They are called emitDwarfDIE and emitDwarfAbbrevs in their new home)
llvm-dsymutil wants to reuse that code, but it doesn't have a DwarfUnit or
a DwarfDebug object to call those. It has access to an AsmPrinter though.
Having emitDIE in the AsmPrinter also removes the DwarfFile dependency
on DwarfDebug, and thus the patch drops that field.
Differential Revision: http://reviews.llvm.org/D8024
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231210 91177308-0d34-0410-b5e6-96231b3b80d8
GCC 4.7's libstdc++ doesn't have std::map::emplace, but it does have
std::unordered_map::emplace, and the use case here doesn't appear to
need ordering. The container has been changed in a separate/precursor
patch, and now this patch should hopefully build cleanly even with
GCC 4.7.
& then I realized the order of the container did matter, so extra
handling of ordering was added in r231189.
Original commit message:
This makes LiveRange non-copyable, and LiveInterval is already
non-movable (due to the explicit dtor), so now it's non-copyable and
non-movable.
Fix the one case where we were relying on the (deprecated in C++11)
implicit copy ctor of LiveInterval (which happened to work because the
ctor created an object with a null segmentSet, so double-deleting the
null pointer was fine).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231192 91177308-0d34-0410-b5e6-96231b3b80d8
The order of this container was needed at one point - so, at that point
create a temporary array of pointers, sort those, then iterate them.
This keeps lookup efficient (& the lesser issue, of allowing the use of
emplace... ), object identity preserved, and ordered iteration in the
one place that requires it.
While this has no functional change, I realize it does mean allocating
an extra data structure and performing a sort - so if this looks suspect
to anyone regarding perf characteristics, I'm all ears.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231189 91177308-0d34-0410-b5e6-96231b3b80d8
Apparently something does care about ordering of LiveIntervals... so
revert all that stuff (r231175, r231176, r231177) & take some time to
re-evaluate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231184 91177308-0d34-0410-b5e6-96231b3b80d8
The intrinsic is no longer generated by the front-end. Remove the intrinsic and
auto-upgrade it to a vector shuffle.
Reviewed by Nadav
This is related to rdar://problem/18742778.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231182 91177308-0d34-0410-b5e6-96231b3b80d8
GCC 4.7's libstdc++ doesn't have std::map::emplace, but it does have
std::unordered_map::emplace, and the use case here doesn't appear to
need ordering. The container has been changed in a separate/precursor
patch, and now this patch should hopefully build cleanly even with
GCC 4.7.
Original commit message:
This makes LiveRange non-copyable, and LiveInterval is already
non-movable (due to the explicit dtor), so now it's non-copyable and
non-movable.
Fix the one case where we were relying on the (deprecated in C++11)
implicit copy ctor of LiveInterval (which happened to work because the
ctor created an object with a null segmentSet, so double-deleting the
null pointer was fine).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231176 91177308-0d34-0410-b5e6-96231b3b80d8
This use case doesn't appear to benefit from ordering, and
std::unordered_map has the advantage that it supports emplace (the
LiveInterval values really shouldn't be copyable or movable & they won't
be in a near-future patch).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231175 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This makes it more obvious that the enum definition and the
"StandardName" array is in sync. Mechanically refactored w/ a
python script.
Test Plan: still compiles
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7845
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231172 91177308-0d34-0410-b5e6-96231b3b80d8
This makes LiveRange non-copyable, and LiveInterval is already
non-movable (due to the explicit dtor), so now it's non-copyable and
non-movable.
Fix the one case where we were relying on the (deprecated in C++11)
implicit copy ctor of LiveInterval (which happened to work because the
ctor created an object with a null segmentSet, so double-deleting the
null pointer was fine).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231168 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This does not conceptually belongs here. Instead provide a shortcut
getModule() that provides access to the DataLayout.
Reviewers: chandlerc, echristo
Reviewed By: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D8027
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231147 91177308-0d34-0410-b5e6-96231b3b80d8
I removed the copy ctor, thinking that'd be the end of it - these
iterators should be perfectly assignable even from disjoint ranges (as
any iterator would be) - exkcept that the member was const.
Unconstify it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231146 91177308-0d34-0410-b5e6-96231b3b80d8
There's no reason to disallow assigning an iterator from one range to an
iterator that previously iterated over a disjoint range. This then
follows the Rule of Zero, allowing implicit copy construction to be used
without hitting the case that's deprecated in C++11.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231142 91177308-0d34-0410-b5e6-96231b3b80d8
There doesn't seem to be any need to assert that iterator assignment is
between iterators over the same node - if you want to reuse an iterator
variable to iterate another node, that's perfectly acceptable. Just
don't mix comparisons between iterators into disjoint sequences, as
usual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231138 91177308-0d34-0410-b5e6-96231b3b80d8
Accidentally committed a few more of these cleanup changes than
intended. Still breaking these out & tidying them up.
This reverts commit r231135.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231136 91177308-0d34-0410-b5e6-96231b3b80d8
There doesn't seem to be any need to assert that iterator assignment is
between iterators over the same node - if you want to reuse an iterator
variable to iterate another node, that's perfectly acceptable. Just
don't mix comparisons between iterators into disjoint sequences, as
usual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231135 91177308-0d34-0410-b5e6-96231b3b80d8
There doesn't seem to be any need to assert that iterator assignment is
between iterators over the same node - if you want to reuse an iterator
variable to iterate another node, that's perfectly acceptable. Just
don't mix comparisons between iterators into disjoint sequences, as
usual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231134 91177308-0d34-0410-b5e6-96231b3b80d8
This type could be made copyable (= default a protected copy ctor in the
base class, and preferably make the derived class final to avoid risks
of providing a slicing copy operation to further derived classes) but it
seemed easier to avoid that complexity for a dump function that I assume
(by symmetry with ResourcePriorityQueue's dump, which was actively
buggy) not often used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231133 91177308-0d34-0410-b5e6-96231b3b80d8
This patch was landed in r231035 and reverted because it was buggy.
This is fixed version of the same change.
Summary:
This patch is an attempt at making `DenseMapIterator`s "fail-fast".
Fail-fast iterators that have been invalidated due to insertion into
the host `DenseMap` deterministically trip an assert (in debug mode)
on access, instead of non-deterministically hitting memory corruption
issues.
Reviewers: dexonsmith, dberlin, ruiu, chandlerc
Reviewed By: chandlerc
Subscribers: yaron.keren, chandlerc, llvm-commits
Differential Revision: http://reviews.llvm.org/D7931
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231125 91177308-0d34-0410-b5e6-96231b3b80d8
Without this, use of this copy ctor is deprecated in C++11 due to the
presence of a user-declared dtor.
Marking the class final is just a little extra security that there are
no further derived classes that may then end up using the intermediate
base class's copy assignment operator and cause slicing to occur.
I didn't bother marking the other (non-test) base class final, since it
has reference members so it won't have any implicit assignment operators
anyway. Open to ideas on that, though.
We probably want a warning about use of a slicing assignment operator,
then I wouldn't worry so much about marking the class as final.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231114 91177308-0d34-0410-b5e6-96231b3b80d8
Making this type a little harder to abuse (see workaround relating to
use of the implicit copy ctor in the prior commit)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231104 91177308-0d34-0410-b5e6-96231b3b80d8
I tried making these private & friended to the BitVector, but that
didn't work - there's one use of BitVector::reference in Clang that
actually copies it into a local variable & uses it from there, rather
than just using the result of op[] in a temporary expression.
Whether or not this is desired is debatable (we could just fix that one
use in Clang) & it's not clear which way the C++ standard falls on this
for std::bitset's reference type (it has the same bug at least in
libstdc++, but Clang's -Wdeprecated doesn't flag it, because it's in a
standard header)
While it was only BitVector::reference's copy ctor that was referenced
by user code, I made SmallBitVector::reference's copy ctor public too,
for consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231099 91177308-0d34-0410-b5e6-96231b3b80d8
Ultimately, __CxxFrameHandler3 needs us to put a stack offset in a
table, and it will take responsibility for copying the exception object
into that slot. Modelling the exception object as an SSA value returned
by begincatch isn't going to work in general, so make it use an output
parameter.
Reviewers: andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D7920
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231086 91177308-0d34-0410-b5e6-96231b3b80d8
Move the specialized metadata nodes for the new debug info hierarchy
into place, finishing off PR22464. I've done bootstraps (and all that)
and I'm confident this commit is NFC as far as DWARF output is
concerned. Let me know if I'm wrong :).
The code changes are fairly mechanical:
- Bumped the "Debug Info Version".
- `DIBuilder` now creates the appropriate subclass of `MDNode`.
- Subclasses of DIDescriptor now expect to hold their "MD"
counterparts (e.g., `DIBasicType` expects `MDBasicType`).
- Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp`
for printing comments.
- Big update to LangRef to describe the nodes in the new hierarchy.
Feel free to make it better.
Testcase changes are enormous. There's an accompanying clang commit on
its way.
If you have out-of-tree debug info testcases, I just broke your build.
- `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to
update all the IR testcases.
- Unfortunately I failed to find way to script the updates to CHECK
lines, so I updated all of these by hand. This was fairly painful,
since the old CHECKs are difficult to reason about. That's one of
the benefits of the new hierarchy.
This work isn't quite finished, BTW. The `DIDescriptor` subclasses are
almost empty wrappers, but not quite: they still have loose casting
checks (see the `RETURN_FROM_RAW()` macro). Once they're completely
gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I
also expect to make a few schema changes now that it's easier to reason
about everything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231082 91177308-0d34-0410-b5e6-96231b3b80d8
Add the final bits of API that `DIBuilder` needs before the new nodes
can be moved into place.
- Add `MDType::clone()` and `MDType::setFlags()` to support
`DIBuilder::createTypeWithFlags()`.
- Add `MDBasicType::get()` overload that just requires a tag and a
name, as a convenience for `DIBuilder::createUnspecifiedType()`.
- Add `MDLocalVariable::withInline()` and
`MDLocalVariable::withoutInline()` to support
`llvm::createInlinedVariable()` and
`llvm::cleanseInlinedVariable()`.
(Somehow these got lost inside the "move into place" patch I'm about to
commit -- better to commit separately!)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231079 91177308-0d34-0410-b5e6-96231b3b80d8
This lets us avoid a few copies that are otherwise hard to get rid of.
The way this is done is, the custom-inserter looks at the following
instruction for another CMOV, and replaces both at the same time.
A previous version used a new CMOV2 opcode, but the custom inserter
is expected to be able to return a different basic block anyway, which
means it's OK - though far from ideal - to alter that block's contents.
Explicitly document that, in case it ever makes a difference.
Alternatives welcome!
Follow-up to r231045.
rdar://19767934
Closes http://reviews.llvm.org/D8019
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231046 91177308-0d34-0410-b5e6-96231b3b80d8
By loading from indexed offsets into a byte array and applying a mask, a
program can test bits from the bit set with a relatively short instruction
sequence. For example, suppose we have 15 bit sets to lay out:
A (16 bits), B (15 bits), C (14 bits), D (13 bits), E (12 bits),
F (11 bits), G (10 bits), H (9 bits), I (7 bits), J (6 bits), K (5 bits),
L (4 bits), M (3 bits), N (2 bits), O (1 bit)
These bits can be laid out in a 16-byte array like this:
Byte Offset
0123456789ABCDEF
Bit
7 HHHHHHHHHIIIIIII
6 GGGGGGGGGGJJJJJJ
5 FFFFFFFFFFFKKKKK
4 EEEEEEEEEEEELLLL
3 DDDDDDDDDDDDDMMM
2 CCCCCCCCCCCCCCNN
1 BBBBBBBBBBBBBBBO
0 AAAAAAAAAAAAAAAA
For example, to test bit X of A, we evaluate ((bits[X] & 1) != 0), or to
test bit X of I, we evaluate ((bits[9 + X] & 0x80) != 0). This can be done
in 1-2 machine instructions on x86, or 4-6 instructions on ARM.
This uses the LPT multiprocessor scheduling algorithm to lay out the bits
efficiently.
Saves ~450KB of instructions in a recent build of Chromium.
Differential Revision: http://reviews.llvm.org/D7954
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231043 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch is an attempt at making `DenseMapIterator`s "fail-fast".
Fail-fast iterators that have been invalidated due to insertion into
the host `DenseMap` deterministically trip an assert (in debug mode)
on access, instead of non-deterministically hitting memory corruption
issues.
Reviewers: dexonsmith, dberlin, ruiu, chandlerc
Reviewed By: chandlerc
Subscribers: yaron.keren, chandlerc, llvm-commits
Differential Revision: http://reviews.llvm.org/D7931
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231035 91177308-0d34-0410-b5e6-96231b3b80d8
TargetRegisterInfo. DebugLocEntry now holds a buffer with the raw bytes
of the pre-calculated DWARF expression.
Ought to be NFC, but it does slightly alter the output format of the
textual assembly.
This reapplies 230930 without the assertion in DebugLocEntry::finalize()
because not all Machine registers can be lowered into DWARF register
numbers and floating point constants cannot be expressed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231023 91177308-0d34-0410-b5e6-96231b3b80d8
Add the enum "LLVMLinkerMode" back for backwards-compatibility and add the
linker mode parameter back to the "LLVMLinkModules" function. The paramter is
ignored and has no effect.
Patch provided by: Filip Pizlo
Reviewed by: Rafael and Sean
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230988 91177308-0d34-0410-b5e6-96231b3b80d8
TargetRegisterInfo. DebugLocEntry now holds a buffer with the raw bytes
of the pre-calculated DWARF expression.
Ought to be NFC, but it does slightly alter the output format of the
textual assembly.
This reapplies 230930 with a relaxed assertion in DebugLocEntry::finalize()
that allows for empty DWARF expressions for constant FP values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230975 91177308-0d34-0410-b5e6-96231b3b80d8
A short list of some of the improvements:
1) Now supports -all command line argument, which implies many
other command line arguments to simplify usage.
2) Now supports -no-compiler-generated command line argument to
exclude compiler generated types.
3) Prints base class list.
4) -class-definitions implies -types.
5) Proper display of bitfields.
6) Can now distinguish between struct/class/interface/union.
And a few other minor tweaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230933 91177308-0d34-0410-b5e6-96231b3b80d8
TargetRegisterInfo. DebugLocEntry now holds a buffer with the raw bytes
of the pre-calculated DWARF expression.
Ought to be NFC, but it does slightly alter the output format of the
textual assembly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230930 91177308-0d34-0410-b5e6-96231b3b80d8
This has the nice property of compiling down to memcmp when feasible. An empty
ArrayRef can have a nullptr in its Data field. I didn't find anything in the
standard speaking against std::equal(nullptr, nullptr, nullptr) begin valid but
MSVC asserts. The way libstdc++ lowers std::equal down to memcmp also makes
invoking std::equal with a nullptr undefined behavior so checking is the only
way to be safe.
The extra check doesn't cost us perf either because we're essentially peeling
the loop header away from the rotated loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230920 91177308-0d34-0410-b5e6-96231b3b80d8
With initializer lists there is a really neat idiomatic way to write
this, 'ArrayRef.equals({1, 2, 3, 4, 5})'. Remove the equal method which
always had a hard limit on the number of arguments. I considered
rewriting it with variadic templates but that's not really a good fit
for a function with homogeneous arguments.
'ArrayRef == {1, 2, 3, 4, 5}' would've been even more awesome, but C++11
doesn't allow init lists with binary operators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230907 91177308-0d34-0410-b5e6-96231b3b80d8
Such edges are zero matrix, and they bring no additional info to the
allocation problem, apart from contributing to nodes' degree. Removing
those edges is expected to improve allocation time.
Tune the spill cost comparison, as this gives better average performances
now that the nodes' degrees has changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230904 91177308-0d34-0410-b5e6-96231b3b80d8
There are static variables of this around that we really want to go
into a read-only segment. Sadly compilers are not smart enough to figure
that out without constexpr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230895 91177308-0d34-0410-b5e6-96231b3b80d8
Fix `MDScope::getFile()` so that it correctly returns a valid `MDFile`
even when it's an instance of `MDFile`. This logic is necessary because
of r230057. I'm working on moving the new hierarchy into place
out-of-tree (on track to commit Monday morning, BTW), and this was
exposed by a few failing tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230871 91177308-0d34-0410-b5e6-96231b3b80d8
Previously it was impossible to distinguish between "There is
no PDB implementation for this platform" and "I tried to load
the PDB, but couldn't find the file", making it hard to figure
out if you built llvm-pdbdump incorrectly or if you just mistyped
a file name.
This patch adds proper error handling so that we can know exactly
what went wrong.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230868 91177308-0d34-0410-b5e6-96231b3b80d8
This looks ridiculous but SmallVector's realloc tricks really help with
large vectors of PODs, such as our virtreg IndexedMap.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230866 91177308-0d34-0410-b5e6-96231b3b80d8
All of the cases were just appending from random access iterators to a
vector. Using insert/append can grow the vector to the perfect size
directly and moves the growing out of the loop. No intended functionalty
change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230845 91177308-0d34-0410-b5e6-96231b3b80d8
This work is currently being rethought along different lines and
if this work is needed it can be resurrected out of svn. Remove it
for now as no current work in ongoing on it and it's unused. Verified
with the authors before removal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230780 91177308-0d34-0410-b5e6-96231b3b80d8
This removes a bit of duplicated code and more importantly, remembers the
labels so that they don't need to be looked up by name.
This in turn allows for any name to be used and avoids a crash if the name
we wanted was already taken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230772 91177308-0d34-0410-b5e6-96231b3b80d8
AnalysisResult::getResultImpl reuses an iterator into a DenseMap after
inserting elements into it. This change adds code to recompute the
iterator before the second use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230718 91177308-0d34-0410-b5e6-96231b3b80d8
uses of TM->getSubtargetImpl and propagate to all calls.
This could be a debugging regression in places where we had a
TargetMachine and/or MachineFunction but don't have it as part
of the MachineInstr. Fixing this would require passing a
MachineFunction/Function down through the print operator, but
none of the existing uses in tree seem to do this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230710 91177308-0d34-0410-b5e6-96231b3b80d8
Function pointers were not correctly handled by the dumper, and
they would print as "* name". They now print as
"int (__cdecl *name)(int arg1, int arg2)" as they should.
Also, doubles were being printed as floats. This fixes that bug
as well, and adds tests for all builtin types. as well as a test
for function pointers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230703 91177308-0d34-0410-b5e6-96231b3b80d8
a lookup, pass that in rather than use a naked call to getSubtargetImpl.
This involved passing down and around either a TargetMachine or
TargetRegisterInfo. Update all callers/definitions around the targets
and SelectionDAG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230699 91177308-0d34-0410-b5e6-96231b3b80d8
Creating BinaryCoverageReader is a strange and complicated dance where
the constructor sets error codes that member functions will later
read, and the object is in an invalid state if readHeader isn't
immediately called after construction.
Instead, make the constructor private and add a static create method
to do the construction properly. This also has the benefit of removing
readHeader completely and simplifying the interface of the object.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230676 91177308-0d34-0410-b5e6-96231b3b80d8
The current name is long and confusing. A shorter one is both easier
to understand and easier to work with.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230675 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is in response to r223147 where the avaiable features are
computed based on ".cpu" directive. This will work clean for the standard
variants like cortex-a9. For custom variants which rely on standard cpu names
for assembly, the additional features of a CPU should be propagated. This can be
done via ".arch_extension" as long as the assembler supports it. The
implementation for krait along with unit test will be submitted in next patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230650 91177308-0d34-0410-b5e6-96231b3b80d8
Also remove the somewhat misleading initializers from
VectorizationFactor and VectorizationInterleave. They will get
initialized with the default ctor since no cl::init is provided.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230608 91177308-0d34-0410-b5e6-96231b3b80d8
Use the IRBuilder helpers for gc.statepoint and gc.result, instead of
coding the construction by hand. Note that the gc.statepoint IRBuilder
handles only CallInst, not InvokeInst; retain that part of hand-coding.
Differential Revision: http://reviews.llvm.org/D7518
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230591 91177308-0d34-0410-b5e6-96231b3b80d8
This required plumbing a TargetRegisterInfo through computeRegisterProperties
and into findRepresentativeClass which uses it for register class
iteration. This required passing a subtarget into a few target specific
initializations of TargetLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230583 91177308-0d34-0410-b5e6-96231b3b80d8
the .h file. It's used in only one place (other than recursively)
and there's no need to include it everywhere.
Saves almost 900k from total llvm object file size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230561 91177308-0d34-0410-b5e6-96231b3b80d8
This change aligns globals to the next highest power of 2 bytes, up to a
maximum of 128. This makes it more likely that we will be able to compress
bit sets with a greater alignment. In many more cases, we can now take
advantage of a new optimization also introduced in this patch that removes
bit set checks if the bit set is all ones.
The 128 byte maximum was found to provide the best tradeoff between instruction
overhead and data overhead in a recent build of Chromium. It allows us to
remove ~2.4MB of instructions at the cost of ~250KB of data.
Differential Revision: http://reviews.llvm.org/D7873
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230540 91177308-0d34-0410-b5e6-96231b3b80d8
Gather and scatter instructions additionally write to one of the source operands - mask register.
In this case Gather has 2 destination values - the loaded value and the mask.
Till now we did not support code gen pattern for gather - the instruction was generated from
intrinsic only and machine node was hardcoded.
When we introduce the masked_gather node, we need to select instruction automatically,
in the standard way.
I added a flag "hasTwoExplicitDefs" that allows to handle 2 destination operands.
(Some code in the X86InstrFragmentsSIMD.td is commented out, just to split one big
patch in many small patches)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230471 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change fixes the FIXME that you recently added when you committed
(a modified version of) my patch. When `InstCombine` combines a load and
store of an pointer to those of an equivalently-sized integer, it currently
drops any `!nonnull` metadata that might be present. This change replaces
`!nonnull` metadata with `!range !{ 1, -1 }` metadata instead.
Reviewers: chandlerc
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7621
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230462 91177308-0d34-0410-b5e6-96231b3b80d8
Like r230414, add bitcode support including backwards compatibility, for
an explicit type parameter to GEP.
At the suggestion of Duncan I tried coalescing the two older bitcodes into a
single new bitcode, though I did hit a wrinkle: I couldn't figure out how to
create an explicit abbreviation for a record with a variable number of
arguments (the indicies to the gep). This means the discriminator between
inbounds and non-inbounds gep is a full variable-length field I believe? Is my
understanding correct? Is there a way to create such an abbreviation? Should I
just use two bitcodes as before?
Reviewers: dexonsmith
Differential Revision: http://reviews.llvm.org/D7736
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230415 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for the QPX vector instruction set, which is used by the
enhanced A2 cores on the IBM BG/Q supercomputers. QPX vectors are 256 bytes
wide, holding 4 double-precision floating-point values. Boolean values, modeled
here as <4 x i1> are actually also represented as floating-point values
(essentially { -1, 1 } for { false, true }). QPX shares many features with
Altivec and VSX, but is distinct from both of them. One major difference is
that, instead of adding completely-separate vector registers, QPX vector
registers are extensions of the scalar floating-point registers (lane 0 is the
corresponding scalar floating-point value). The operations supported on QPX
vectors mirrors that supported on the scalar floating-point values (with some
additional ones for permutations and logical/comparison operations).
I've been maintaining this support out-of-tree, as part of the bgclang project,
for several years. This is not the entire bgclang patch set, but is most of the
subset that can be cleanly integrated into LLVM proper at this time. Adding
this to the LLVM backend is part of my efforts to rebase bgclang to the current
LLVM trunk, but is independently useful (especially for codes that use LLVM as
a JIT in library form).
The assembler/disassembler test coverage is complete. The CodeGen test coverage
is not, but I've included some tests, and more will be added as follow-up work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230413 91177308-0d34-0410-b5e6-96231b3b80d8
The builder is based on a layout algorithm that tries to keep members of
small bit sets together. The new layout compresses Chromium's bit sets to
around 15% of their original size.
Differential Revision: http://reviews.llvm.org/D7796
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230394 91177308-0d34-0410-b5e6-96231b3b80d8
The logic is almost there already, with our special homogeneous aggregate
handling. Tweaking it like this allows front-ends to emit AAPCS compliant code
without ever having to count registers or add discarded padding arguments.
Only arrays of i32 and i64 are needed to model AAPCS rules, but I decided to
apply the logic to all integer arrays for more consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230348 91177308-0d34-0410-b5e6-96231b3b80d8
When debugging LTO issues with ld64, we use -save-temps to save the merged
optimized bitcode file, then invoke ld64 again on the single bitcode file to
speed up debugging code generation passes and ld64 stuff after code generation.
llvm linking a single bitcode file via lto_codegen_add_module will generate a
different bitcode file from the single input. With the newly-added
lto_codegen_set_module, we can make sure the destination module is the same as
the input.
lto_codegen_set_module will transfer the ownship of the module to code
generator.
rdar://19024554
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230290 91177308-0d34-0410-b5e6-96231b3b80d8
Front-ends could use global unnamed_addr to hold pointers to other
symbols, like @gotequivalent below:
@foo = global i32 42
@gotequivalent = private unnamed_addr constant i32* @foo
@delta = global i32 trunc (i64 sub (i64 ptrtoint (i32** @gotequivalent to i64),
i64 ptrtoint (i32* @delta to i64))
to i32)
The global @delta holds a data "PC"-relative offset to @gotequivalent,
an unnamed pointer to @foo. The darwin/x86-64 assembly output for this follows:
.globl _foo
_foo:
.long 42
.globl _gotequivalent
_gotequivalent:
.quad _foo
.globl _delta
_delta:
.long _gotequivalent-_delta
Since unnamed_addr indicates that the address is not significant, only
the content, we can optimize the case above by replacing pc-relative
accesses to "GOT equivalent" globals, by a PC relative access to the GOT
entry of the final symbol instead. Therefore, "delta" can contain a pc
relative relocation to foo's GOT entry and we avoid the emission of
"gotequivalent", yielding the assembly code below:
.globl _foo
_foo:
.long 42
.globl _delta
_delta:
.long _foo@GOTPCREL+4
There are a couple of advantages of doing this: (1) Front-ends that need
to emit a great deal of data to store pointers to external symbols could
save space by not emitting such "got equivalent" globals and (2) IR
constructs combined with this opt opens a way to represent GOT pcrel
relocations by using the LLVM IR, which is something we previously had
no way to express.
Differential Revision: http://reviews.llvm.org/D6922
rdar://problem/18534217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230264 91177308-0d34-0410-b5e6-96231b3b80d8
It was previously using the subtarget to get values for the global
offset without actually checking each function as it was generating
code. Go ahead and solidify the current behavior and make the
existing FIXMEs more prominent.
As a note the ARM backend previously had a thumb1 and non-thumb1
set of defaults. Only the former was tested so I've changed the
behavior to only use that for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230245 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds the isProfitableToHoist API. For AArch64, we want to prevent a
fmul from being hoisted in cases where it is more profitable to form a
fmsub/fmadd.
Phabricator Review: http://reviews.llvm.org/D7299
Patch by Lawrence Hu <lawrence@codeaurora.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230241 91177308-0d34-0410-b5e6-96231b3b80d8
This assumes that
a) finding the bucket containing the value is LIKELY
b) finding an empty bucket is LIKELY
c) growing the table is UNLIKELY
I also switched the a) and b) cases for SmallPtrSet as we seem to use
the set mostly more for insertion than for checking existence.
In a simple benchmark consisting of 2^21 insertions of 2^20 unique
pointers into a DenseMap or SmallPtrSet a few percent speedup on average,
but nothing statistically significant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230232 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the --class-definitions flag. If specified, when dumping
types, instead of "class Foo" you will see the full class definition,
with member functions, constructors, access specifiers.
NOTE: Using this option can be very slow, as generating a full class
definition requires accessing many different parts of the PDB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230203 91177308-0d34-0410-b5e6-96231b3b80d8
I made my best guess at the Makefile, since I don't have a make build.
I'm not sure if it should be valid to add an empty list of things, but
it seemed the sort of degenerate case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230196 91177308-0d34-0410-b5e6-96231b3b80d8
This increases the flexibility of how to dump different
symbol types -- necessary for context-sensitive formatting of
symbol types -- and also improves the modularity by allowing
the dumping to be implemented in the actual dumper, as opposed
to in the PDB library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230184 91177308-0d34-0410-b5e6-96231b3b80d8
While fuzzing LLVM bitcode files, I discovered that (1) the bitcode reader doesn't check that alignments are no larger than 2**29; (2) downstream code doesn't check the range; and (3) for values out of range, corresponding large memory requests (based on alignment size) will fail. This code fixes the bitcode reader to check for valid alignments, fixing this problem.
This CL fixes alignment value on global variables, functions, and instructions: alloca, load, load atomic, store, store atomic.
Patch by Karl Schimpf (kschimpf@google.com).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230180 91177308-0d34-0410-b5e6-96231b3b80d8
This refactors the core functionality of LICM: HoistRegion, SinkRegion and
PromoteAliasSet (renamed to promoteLoopAccessesToScalars) as utility functions
in LoopUtils. This will enable other transformations to make use of them
directly.
Patch by Ashutosh Nema.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230178 91177308-0d34-0410-b5e6-96231b3b80d8
Everyone except R600 was manually passing the length of a static array
at each callsite, calculated in a variety of interesting ways. Far
easier to let ArrayRef handle that.
There should be no functional change, but out of tree targets may have
to tweak their calls as with these examples.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230118 91177308-0d34-0410-b5e6-96231b3b80d8
Split debug info 'flags' bitfield over a vector so the current flags can
be iterated over. This API (in combination with r230107) will be used
for assembly support for symbolic constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230108 91177308-0d34-0410-b5e6-96231b3b80d8
Add `DIDescriptor::getFlag(StringRef)` and
`DIDescriptor::getFlagString(unsigned)`. The latter only converts exact
matches; I'll add separate API for breaking the flags bitfield up into
parts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230107 91177308-0d34-0410-b5e6-96231b3b80d8
This allows sharing of FMA forming combines to work
with instructions that have the same semantics as a separate
multiply and add.
This is expand by default, and only formed post legalization
so it shouldn't have much impact on targets that do not want it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230070 91177308-0d34-0410-b5e6-96231b3b80d8
In the old (well, current) schema, there are two types of file
references: untagged and tagged (the latter references the former).
!0 = !{!"filename", !"/directory"}
!1 = !{!"0x29", !1} ; DW_TAG_file_type [filename] [/directory]
The interface to `DIBuilder` universally takes the tagged version,
described by `DIFile`. However, most `file:` references actually use
the untagged version directly.
In the new hierarchy, I'm merging this into a single node: `MDFile`.
Originally I'd planned to keep the old schema unchanged until after I
moved the new hierarchy into place.
However, it turns out to be trivial to make `MDFile` match both nodes at
the same time.
- Anyone referencing !1 does so through `DIFile`, whose implementation
I need to gut anyway (as I do the rest of the `DIDescriptor`s).
- Anyone referencing !0 just references an `MDNode`, and expects a
node with two `MDString` operands.
This commit achieves that, and updates all the testcases for the parts
of the new hierarchy that used the two-node schema (I've replaced the
untagged nodes with `distinct !{}` to make the diff clear (otherwise the
metadata all gets renumbered); it might be worthwhile to come back and
delete those nodes and renumber the world, not sure).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230057 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a new mechanism that allows IR modules to co-operatively
build pointer sets corresponding to addresses within a given set of
globals. One particular use case for this is to allow a C++ program to
efficiently verify (at each call site) that a vtable pointer is in the set
of valid vtable pointers for the class or its derived classes. One way of
doing this is for a toolchain component to build, for each class, a bit set
that maps to the memory region allocated for the vtables, such that each 1
bit in the bit set maps to a valid vtable for that class, and lay out the
vtables next to each other, to minimize the total size of the bit sets.
The patch introduces a metadata format for representing pointer sets, an
'@llvm.bitset.test' intrinsic and an LTO lowering pass that lays out the globals
and builds the bitsets, and documents the new feature.
Differential Revision: http://reviews.llvm.org/D7288
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230054 91177308-0d34-0410-b5e6-96231b3b80d8
It would be nice to get rid of the version checks here, but that will
have to wait until libstdc++ is upgraded to 5.0 everywhere ...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230021 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an error introduced in r228934 where None was converted to
an int instead of the int being converted to an Optional as intended.
We make that sort of mistake a compile error by changing NoneType into
a scoped enum.
Finally, provide a static NoneType called None to avoid forcing all
users to spell it NoneType::None.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229980 91177308-0d34-0410-b5e6-96231b3b80d8
This constructor is more efficient for symbols that have already been emitted,
since it avoids the construction/execution of a std::function.
Update the ObjectLinkingLayer to use this new constructor where possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229973 91177308-0d34-0410-b5e6-96231b3b80d8
single place and replace calls to getSubtargetImpl with calls
to get the subtarget from the MachineFunction where valid.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229971 91177308-0d34-0410-b5e6-96231b3b80d8
`DILocation` is a lightweight wrapper. Its accessors check for null and
the correct type, and then forward to `MDLocation`.
Extract a couple of macros to do the `dyn_cast_or_null<>` and default
return logic. I'll be using these to minimize error-prone boilerplate
when I move the new hierarchy into place -- since all the other
subclasses of `DIDescriptor` will similarly become lightweight wrappers.
(Note that I hope to obsolete these wrappers fairly quickly, with the
goal of renaming the underlying types (e.g., I'll rename `MDLocation` to
`DILocation` once the name is free).)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229953 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't pass 'ninja check-llvm' for me. Lots of tests, including
the ones updated, fail with crashes and other explosions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229952 91177308-0d34-0410-b5e6-96231b3b80d8
This patch consists of a single pass whose only purpose is to visit previous inserted gc.statepoints which do not have gc.relocates inserted yet, and insert them. This can be used either immediately after IR generation to perform 'early safepoint insertion' or late in the pass order to perform 'late insertion'.
This patch is setting the stage for work to continue in tree. In particular, there are known naming and style violations in the current patch. I'll try to get those resolved over the next week or so. As I touch each area to make style changes, I need to make sure we have adequate testing in place. As part of the cleanup, I will be cleaning up a collection of test cases we have out of tree and submitting them upstream. The tests included in this change are very basic and mostly to provide examples of usage.
The pass has several main subproblems it needs to address:
- First, it has identify any live pointers. In the current code, the use of address spaces to distinguish pointers to GC managed objects is hard coded, but this will become parametrizable in the near future. Note that the current change doesn't actually contain a useful liveness analysis. It was seperated into a followup change as the code wasn't ready to be shared. Instead, the current implementation just considers any dominating def of appropriate pointer type to be live.
- Second, it has to identify base pointers for each live pointer. This is a fairly straight forward data flow algorithm.
- Third, the information in the previous steps is used to actually introduce rewrites. Rather than trying to do this by hand, we simply re-purpose the code behind Mem2Reg to do this for us.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229945 91177308-0d34-0410-b5e6-96231b3b80d8
Today a simple function that only catches exceptions and doesn't run
destructor cleanups ends up containing a dead call to _Unwind_Resume
(PR20300). We can't remove these dead resume instructions during normal
optimization because inlining might introduce additional landingpads
that do have cleanups to run. Instead we can do this during EH
preparation, which is guaranteed to run after inlining.
Fixes PR20300.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D7744
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229944 91177308-0d34-0410-b5e6-96231b3b80d8
The instructions were being generated on architectures that don't support avx512.
This reverts commit r229837.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229942 91177308-0d34-0410-b5e6-96231b3b80d8
When trying to match the current schema with the new debug info
hierarchy, I downgraded `SizeInBits`, `AlignInBits` and `OffsetInBits`
to 32-bits (oops!). Caught this while testing my upgrade script to move
the hierarchy into place. Bump it back up to 64-bits and update tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229933 91177308-0d34-0410-b5e6-96231b3b80d8
The LoopInfo in combination with depth_first is used to enumerate the
loops.
Right now -analyze is not yet complete. It only prints the result of
the analysis, the report and the run-time checks. Printing the unsafe
depedences will require a bit more reshuffling which I'd like to do in a
follow-on to this patchset. Unsafe dependences are currently checked
via -debug-only=loop-accesses in the new test.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229898 91177308-0d34-0410-b5e6-96231b3b80d8
The only difference between these two is that VectorizerReport adds a
vectorizer-specific prefix to its messages. When LAA is used in the
vectorizer context the prefix is added when we promote the
LoopAccessReport into a VectorizerReport via one of the constructors.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229897 91177308-0d34-0410-b5e6-96231b3b80d8
When I split out LoopAccessReport from this, I need to create some temps
so constness becomes necessary.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229896 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the analysis to be attempted with any loop. This feature
will be used with -analysis. (LV only requests the analysis on loops
that have already satisfied these tests.)
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229895 91177308-0d34-0410-b5e6-96231b3b80d8
Also add pass name as an argument to VectorizationReport::emitAnalysis.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229894 91177308-0d34-0410-b5e6-96231b3b80d8
This is a function pass that runs the analysis on demand. The analysis
can be initiated by querying the loop access info via LAA::getInfo. It
either returns the cached info or runs the analysis.
Symbolic stride information continues to reside outside of this analysis
pass. We may move it inside later but it's not a priority for me right
now. The idea is that Loop Distribution won't support run-time stride
checking at least initially.
This means that when querying the analysis, symbolic stride information
can be provided optionally. Whether stride information is used can
invalidate the cache entry and rerun the analysis. Note that if the
loop does not have any symbolic stride, the entry should be preserved
across Loop Distribution and LV.
Since currently the only user of the pass is LV, I just check that the
symbolic stride information didn't change when using a cached result.
On the LV side, LoopVectorizationLegality requests the info object
corresponding to the loop from the analysis pass. A large chunk of the
diff is due to LAI becoming a pointer from a reference.
A test will be added as part of the -analyze patch.
Also tested that with AVX, we generate identical assembly output for the
testsuite (including the external testsuite) before and after.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229893 91177308-0d34-0410-b5e6-96231b3b80d8
LAA will be an on-demand analysis pass, so we need to cache the result
of the analysis. canVectorizeMemory is renamed to analyzeLoop which
computes the result. canVectorizeMemory becomes the query function for
the cached result.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229892 91177308-0d34-0410-b5e6-96231b3b80d8
The transformation passes will query this and then emit them as part of
their own report. The currently only user LV is modified to do just
that.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229891 91177308-0d34-0410-b5e6-96231b3b80d8
As LAA is becoming a pass, we can no longer pass the params to its
constructor. This changes the command line flags to have external
storage. These can now be accessed both from LV and LAA.
VectorizerParams is moved out of LoopAccessInfo in order to shorten the
code to access it.
This commits also has the fix (D7731) to the break dependence cycle
between the analysis and vector libraries.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229890 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r229651.
I'd like to ultimately revert r229650 but this reformat stands in the
way. I'll reformat the affected files once the the loop-access pass is
fully committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229889 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, subtarget features were a bitfield with the underlying type being uint64_t.
Since several targets (X86 and ARM, in particular) have hit or were very close to hitting this bound, switching the features to use a bitset.
No functional change.
Differential Revision: http://reviews.llvm.org/D7065
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229831 91177308-0d34-0410-b5e6-96231b3b80d8
Follow-up to r229740, which removed `DITemplate*::getContext()` after my
upgrade script revealed that scopes are always `nullptr` for template
parameters. This is the other shoe: drop `scope:` from
`MDTemplateParameter` and its two subclasses. (Note: a bitcode upgrade
would be pointless, since the hierarchy hasn't been moved into place.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229791 91177308-0d34-0410-b5e6-96231b3b80d8
This tests the simple resume instruction elimination logic that we have
before making some changes to it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229768 91177308-0d34-0410-b5e6-96231b3b80d8
Add `replaceElements()`, `replaceVTableHolder()`, and
`replaceTemplateParams()` to `MDCompositeTypeBase`. Included an
assertion in `replaceElements()` to match the one in
`DICompositeType::replaceArrays()`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229744 91177308-0d34-0410-b5e6-96231b3b80d8
The scope/context is always the compile unit, which we replace with
`nullptr` anyway (via `getNonCompileUnitScope()`). Drop it explicitly.
I noticed this field was always null while writing testcase upgrade
scripts to transition to the new hierarchy. Seems wasteful to
transition it over if it's already out-of-use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229740 91177308-0d34-0410-b5e6-96231b3b80d8
`DIImportedEntity::getEntity()` currently returns a `DIScopeRef`, but
the nodes it references aren't always `DIScope`s. In particular, it can
reference global variables.
Introduce `DIDescriptorRef` to avoid the lie.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229733 91177308-0d34-0410-b5e6-96231b3b80d8
This comes up when we generate coverage for a function but don't end
up emitting the function at all - dead static functions or inline
functions that aren't referenced in a particular TU, for example. In
these cases we'd like to show that the function was never called,
which is trivially true.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229717 91177308-0d34-0410-b5e6-96231b3b80d8
Make CoverageMapping easier to create, so that we can write targeted
unit tests for its internals, and add a some infrastructure to write
these tests. Finally, add a simple unit test for basic functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229709 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
These ISA's didn't add any instructions so they are almost identical to
Mips32r2 and Mips64r2. Even the ELF e_flags are the same, However the ISA
revision in .MIPS.abiflags is 3 or 5 respectively instead of 2.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: tomatabacu, llvm-commits, atanasyan
Differential Revision: http://reviews.llvm.org/D7381
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229695 91177308-0d34-0410-b5e6-96231b3b80d8
r229622: "[LoopAccesses] Make VectorizerParams global"
r229623: "[LoopAccesses] Stash the report from the analysis rather than emitting it"
r229624: "[LoopAccesses] Cache the result of canVectorizeMemory"
r229626: "[LoopAccesses] Create the analysis pass"
r229628: "[LoopAccesses] Change debug messages from LV to LAA"
r229630: "[LoopAccesses] Add canAnalyzeLoop"
r229631: "[LoopAccesses] Add missing const to APIs in VectorizationReport"
r229632: "[LoopAccesses] Split out LoopAccessReport from VectorizerReport"
r229633: "[LoopAccesses] Add -analyze support"
r229634: "[LoopAccesses] Change LAA:getInfo to return a constant reference"
r229638: "Analysis: fix buildbots"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229650 91177308-0d34-0410-b5e6-96231b3b80d8
The LoopInfo in combination with depth_first is used to enumerate the
loops.
Right now -analyze is not yet complete. It only prints the result of
the analysis, the report and the run-time checks. Printing the unsafe
depedences will require a bit more reshuffling which I'd like to do in a
follow-on to this patchset. Unsafe dependences are currently checked
via -debug-only=loop-accesses in the new test.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229633 91177308-0d34-0410-b5e6-96231b3b80d8
The only difference between these two is that VectorizerReport adds a
vectorizer-specific prefix to its messages. When LAA is used in the
vectorizer context the prefix is added when we promote the
LoopAccessReport into a VectorizerReport via one of the constructors.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229632 91177308-0d34-0410-b5e6-96231b3b80d8
When I split out LoopAccessReport from this, I need to create some temps
so constness becomes necessary.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229631 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the analysis to be attempted with any loop. This feature
will be used with -analysis. (LV only requests the analysis on loops
that have already satisfied these tests.)
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229630 91177308-0d34-0410-b5e6-96231b3b80d8
Will be used by the new RuntimePointerCheck::print.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229629 91177308-0d34-0410-b5e6-96231b3b80d8
Also add pass name as an argument to VectorizationReport::emitAnalysis.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229628 91177308-0d34-0410-b5e6-96231b3b80d8
This is a function pass that runs the analysis on demand. The analysis
can be initiated by querying the loop access info via LAA::getInfo. It
either returns the cached info or runs the analysis.
Symbolic stride information continues to reside outside of this analysis
pass. We may move it inside later but it's not a priority for me right
now. The idea is that Loop Distribution won't support run-time stride
checking at least initially.
This means that when querying the analysis, symbolic stride information
can be provided optionally. Whether stride information is used can
invalidate the cache entry and rerun the analysis. Note that if the
loop does not have any symbolic stride, the entry should be preserved
across Loop Distribution and LV.
Since currently the only user of the pass is LV, I just check that the
symbolic stride information didn't change when using a cached result.
On the LV side, LoopVectorizationLegality requests the info object
corresponding to the loop from the analysis pass. A large chunk of the
diff is due to LAI becoming a pointer from a reference.
A test will be added as part of the -analyze patch.
Also tested that with AVX, we generate identical assembly output for the
testsuite (including the external testsuite) before and after.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229626 91177308-0d34-0410-b5e6-96231b3b80d8
blockNeedsPredication is in LoopAccess in order to share it with the
vectorizer. It's a utility needed by LoopAccess not strictly provided
by it but it's a good place to share it. This makes the function static
so that it no longer required to create an LoopAccessInfo instance in
order to access it from LV.
This was actually causing problems because it would have required
creating LAI much earlier that LV::canVectorizeMemory().
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229625 91177308-0d34-0410-b5e6-96231b3b80d8
LAA will be an on-demand analysis pass, so we need to cache the result
of the analysis. canVectorizeMemory is renamed to analyzeLoop which
computes the result. canVectorizeMemory becomes the query function for
the cached result.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229624 91177308-0d34-0410-b5e6-96231b3b80d8
The transformation passes will query this and then emit them as part of
their own report. The currently only user LV is modified to do just
that.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229623 91177308-0d34-0410-b5e6-96231b3b80d8
As LAA is becoming a pass, we can no longer pass the params to its
constructor. This changes the command line flags to have external
storage. These can now be accessed both from LV and LAA.
VectorizerParams is moved out of LoopAccessInfo in order to shorten the
code to access it.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229622 91177308-0d34-0410-b5e6-96231b3b80d8
LoopAccessAnalysis will be used as the name of the pass.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229621 91177308-0d34-0410-b5e6-96231b3b80d8
Since VectorizationReport will be part of the result of the analysis it
will be stored in a container. However, one of its members is a
raw_string_ostream which cannot be copy-constructed.
This makes the raw_string_ostream local to the << operator.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229620 91177308-0d34-0410-b5e6-96231b3b80d8
Have the InstrProfWriter return a MemoryBuffer instead of a
std::string. This fixes the alignment issues the reader would hit, and
it's a more appropriate type for this anyway.
I've also removed an ugly helper function that's not needed since
we're allowing initializer lists now, and updated some error code
checks based on MSVC's issues with r229473.
This reverts r229483, reapplying r229478.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229602 91177308-0d34-0410-b5e6-96231b3b80d8
The problem in the original patch was not switching back to .text after printing
an eh table.
Original message:
On ELF, put PIC jump tables in a non executable section.
Fixes PR22558.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229586 91177308-0d34-0410-b5e6-96231b3b80d8
