The form of nops used is CPU-specific (some CPUs, such as the POWER7, have
special group-terminating nops). We probably want a different callback for this
kind of nop insertion (something more like MCAsmBackend::writeNopData), or for
PPC to use a different mechanism for scheduling nops, but this will stop the
test from failing for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225928 91177308-0d34-0410-b5e6-96231b3b80d8
Don't do the v4i8 -> v4f32 combine if the load will need to
be expanded due to alignment. This stops adding instructions
to repack into a single register that the v_cvt_ubyteN_f32
instructions read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225926 91177308-0d34-0410-b5e6-96231b3b80d8
Now that the source and destination types can be specified,
allow doing an expansion that doesn't use an EXTLOAD of the
result type. Try to do a legal extload to an intermediate type
and extend that if possible.
This generalizes the special case custom lowering of extloads
R600 has been using to work around this problem.
This also happens to fix a bug that would incorrectly use more
aligned loads than should be used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225925 91177308-0d34-0410-b5e6-96231b3b80d8
The machine scheduler is still disabled by default.
The schedule model is not complete yet, and could be improved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225913 91177308-0d34-0410-b5e6-96231b3b80d8
This re-applies r225808, fixed to avoid problems with SDAG dependencies along
with the preceding fix to ScheduleDAGSDNodes::RegDefIter::InitNodeNumDefs.
These problems caused the original regression tests to assert/segfault on many
(but not all) systems.
Original commit message:
This commit does two things:
1. Refactors PPCFastISel to use more of the common infrastructure for call
lowering (this lets us take advantage of this common code for lowering some
common intrinsics, stackmap/patchpoint among them).
2. Adds support for stackmap/patchpoint lowering. For the most part, this is
very similar to the support in the AArch64 target, with the obvious differences
(different registers, NOP instructions, etc.). The test cases are adapted
from the AArch64 test cases.
One difference of note is that the patchpoint call sequence takes 24 bytes, so
you can't use less than that (on AArch64 you can go down to 16). Also, as noted
in the docs, we take the patchpoint address to be the actual code address
(assuming the call is local in the TOC-sharing sense), which should yield
higher performance than generating the full cross-DSO indirect-call sequence
and is likely just as useful for JITed code (if not, we'll change it).
StackMaps and Patchpoints are still marked as experimental, and so this support
is doubly experimental. So go ahead and experiment!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225909 91177308-0d34-0410-b5e6-96231b3b80d8
A pass that adds random noops to X86 binaries to introduce diversity with the goal of increasing security against most return-oriented programming attacks.
Command line options:
-noop-insertion // Enable noop insertion.
-noop-insertion-percentage=X // X% of assembly instructions will have a noop prepended (default: 50%, requires -noop-insertion)
-max-noops-per-instruction=X // Randomly generate X noops per instruction. ie. roll the dice X times with probability set above (default: 1). This doesn't guarantee X noop instructions.
In addition, the following 'quick switch' in clang enables basic diversity using default settings (currently: noop insertion and schedule randomization; it is intended to be extended in the future).
-fdiversify
This is the llvm part of the patch.
clang part: D3393
http://reviews.llvm.org/D3392
Patch by Stephen Crane (@rinon)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225908 91177308-0d34-0410-b5e6-96231b3b80d8
PATCHPOINT is a strange pseudo-instruction. Depending on how it is used, and
whether or not the AnyReg calling convention is being used, it might or might
not define a value. However, its TableGen definition says that it defines one
value, and so when it doesn't, the code in ScheduleDAGSDNodes::RegDefIter
becomes confused and the code that uses the RegDefIter will try to get the
register class of the MVT::Other type associated with the PATCHPOINT's chain
result (under certain circumstances).
This will be covered by the PPC64 PatchPoint test cases once that support is
re-committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225907 91177308-0d34-0410-b5e6-96231b3b80d8
This adds handling for ExceptionHandling::MSVC, used by the
x86_64-pc-windows-msvc triple. It assumes that filter functions have
already been outlined in either the frontend or the backend. Filter
functions are used in place of the landingpad catch clause type info
operands. In catch clause order, the first filter to return true will
catch the exception.
The C specific handler table expects the landing pad to be split into
one block per handler, but LLVM IR uses a single landing pad for all
possible unwind actions. This patch papers over the mismatch by
synthesizing single instruction BBs for every catch clause to fill in
the EH selector that the landing pad block expects.
Missing functionality:
- Accessing data in the parent frame from outlined filters
- Cleanups (from __finally) are unsupported, as they will require
outlining and parent frame access
- Filter clauses are unsupported, as there's no clear analogue in SEH
In other words, this is the minimal set of changes needed to write IR to
catch arbitrary exceptions and resume normal execution.
Reviewers: majnemer
Differential Revision: http://reviews.llvm.org/D6300
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225904 91177308-0d34-0410-b5e6-96231b3b80d8
Although this makes the `cast<>` assert more often, the
`assert(Node->isResolved())` on the following line would assert in all
those cases. So, no functionality change here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225903 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out, all callsites of the simplifier are guarded by a check for
CallInst::getCalledFunction (i.e., to make sure the callee is direct).
This check wasn't done when trying to further optimize a simplified fortified
libcall, introduced by a refactoring in r225640.
Fix that, add a testcase, and document the requirement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225895 91177308-0d34-0410-b5e6-96231b3b80d8
a print method.
This was formulated on a bad idea, but sadly I didn't uncover how bad
this was until I got further down the path. I had hoped that we could
provide a low boilerplate way of printing analyses, but it just doesn't
seem like this really fits the needs of the analyses. Not all analyses
really want to do printing, and those that do don't all use the same
interface. Instead, with the new pass manager let's just take advantage
of the fact that creating an explicit printer pass like the LCG has is
pretty low boilerplate already and rely on that for testing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225861 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r225852, it was a bad idea.
MachineReg should always be a physical register. If it isn't this DebugLoc
shouldn't have been created in the first place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225857 91177308-0d34-0410-b5e6-96231b3b80d8
I'm adding generic analysis printing utility pass support which will
require such a method (or a specialization) so this will let the
existing printing logic satisfy that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225854 91177308-0d34-0410-b5e6-96231b3b80d8
emitDebugLocValue() into DwarfExpression.
Ought to be NFC, but it actually uncovered a bug in the debug-loc-asan.ll
testcase. The testcase checks that the address of variable "y" is stored
at [RSP+16], which also lines up with the comment.
It also check(ed) that the *value* of "y" is stored in RDI before that,
but that is actually incorrect, since RDI is the very value that is
stored in [RSP+16]. Here's the assembler output:
movb 2147450880(%rcx), %r8b
#DEBUG_VALUE: bar:y <- RDI
cmpb $0, %r8b
movq %rax, 32(%rsp) # 8-byte Spill
movq %rsi, 24(%rsp) # 8-byte Spill
movq %rdi, 16(%rsp) # 8-byte Spill
.Ltmp3:
#DEBUG_VALUE: bar:y <- [RSP+16]
Fixed the comment to spell out the correct register and the check to
expect an address rather than a value.
Note that the range that is emitted for the RDI location was and is still
wrong, it claims to begin at the function prologue, but really it should
start where RDI is first assigned.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225851 91177308-0d34-0410-b5e6-96231b3b80d8
The backend now assumes that all immediates are integers. This allows
us to simplify immediate handling code, becasue we no longer need to
handle fp and integer immediates differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225844 91177308-0d34-0410-b5e6-96231b3b80d8
Even before I sunk the debug flag into the opt tool this had been made
obsolete by factoring the pass and analysis managers into a single set
of templates that all used the core flag. No functionality changed here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225842 91177308-0d34-0410-b5e6-96231b3b80d8
and expose the necessary hooks in the API directly.
This makes it much cleaner for example to log the usage of a pass
manager from a library. It also makes it more obvious that this
functionality isn't "optional" or "asserts-only" for the pass manager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225841 91177308-0d34-0410-b5e6-96231b3b80d8
This now handles both 32 and 64-bit element sizes.
In this version, the test are in vector-shuffle-512-v8.ll, canonicalized by
Chandler's update_llc_test_checks.py.
Part of <rdar://problem/17688758>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225838 91177308-0d34-0410-b5e6-96231b3b80d8
