because of the inside-out run of LoopSimplify in the LoopPassManager and
the fact that LoopSimplify couldn't be "preserved" across two
independent LoopPassManagers.
Anyways, in that case, IndVars wasn't correctly preserving an LCSSA PHI
node because it thought it was rewriting (via SCEV) the incoming value
to a loop invariant value. While it may well be invariant for the
current loop, it may be rewritten in terms of an enclosing loop's
values. This in and of itself is fine, as the LCSSA PHI node in the
enclosing loop for the inner loop value we're rewriting will have its
own LCSSA PHI node if used outside of the enclosing loop. With me so
far?
Well, the current loop and the enclosing loop may share an exiting
block and exit block, and when they do they also share LCSSA PHI nodes.
In this case, its not valid to RAUW through the LCSSA PHI node.
Expected crazy test included.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200372 91177308-0d34-0410-b5e6-96231b3b80d8
This is a bit more convenient for some callers, but more importantly, it is
easier to implement correctly. Doing this removes the patching of already
printed data that was used for fastcall, fixing a crash with private fastcall
symbols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200367 91177308-0d34-0410-b5e6-96231b3b80d8
When the scalar compare is between floating point and operands are
vector, we custom lower SELECT_CC to use NEON SIMD compare for
generating less instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200365 91177308-0d34-0410-b5e6-96231b3b80d8
As opposed to GCC/GAS the default ABI for Mips64 is n64.
Compatibility bit should be set if o32 ABI is used when targeting Mips64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200332 91177308-0d34-0410-b5e6-96231b3b80d8
The code was missing the case for aggregate parameters and
hence was emitting them as .b0 type. Also fixed a couple
of comments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200325 91177308-0d34-0410-b5e6-96231b3b80d8
When simplifycfg moves an instruction, it must drop metadata it doesn't know
is still valid with the preconditions changes. In particular, it must drop
the range and tbaa metadata.
The patch implements this with an utility function to drop all metadata not
in a white list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200322 91177308-0d34-0410-b5e6-96231b3b80d8
Make sure that we don't introduce illegal build_vector dag nodes
when trying to fold a sign_extend of a build_vector.
This fixes a regression introduced by r200234.
Added test CodeGen/X86/fold-vector-sext-crash.ll
to verify that llc no longer crashes with an assertion failure
due to an illegal build_vector of type MVT::v4i64.
Thanks to Ilia Filippov for spotting this regression and for
providing a reproducible test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200313 91177308-0d34-0410-b5e6-96231b3b80d8
vectorizer, placing it behind an off-by-default flag.
It turns out that block frequency isn't what we want at all, here or
elsewhere. This has been I think a nagging feeling for several of us
working with it, but Arnold has given some really nice simple examples
where the results are so comprehensively wrong that they aren't useful.
I'm planning to email the dev list with a summary of why its not really
useful and a couple of ideas about how to better structure these types
of heuristics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200294 91177308-0d34-0410-b5e6-96231b3b80d8
GPRC_NOR0 is not a subclass of GPRC (because it also contains the ZERO pseudo
register). As a result, we also need to check for it in the spilling code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200288 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I searched Transforms/ and Analysis/ for 'ByVal' and updated those call
sites to check for inalloca if appropriate.
I added tests for any change that would allow an optimization to fire on
inalloca.
Reviewers: nlewycky
Differential Revision: http://llvm-reviews.chandlerc.com/D2449
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200281 91177308-0d34-0410-b5e6-96231b3b80d8
The vectorizer takes a loop like this and widens all instructions except for the
store. The stores are scalarized/unrolled and hidden behind an "if" block.
for (i = 0; i < 128; ++i) {
if (a[i] < 10)
a[i] += val;
}
for (i = 0; i < 128; i+=2) {
v = a[i:i+1];
v0 = (extract v, 0) + 10;
v1 = (extract v, 1) + 10;
if (v0 < 10)
a[i] = v0;
if (v1 < 10)
a[i] = v1;
}
The vectorizer relies on subsequent optimizations to sink instructions into the
conditional block where they are anticipated.
The flag "vectorize-num-stores-pred" controls whether and how many stores to
handle this way. Vectorization of conditional stores is disabled per default for
now.
This patch also adds a change to the heuristic when the flag
"enable-loadstore-runtime-unroll" is enabled (off by default). It unrolls small
loops until load/store ports are saturated. This heuristic uses TTI's
getMaxUnrollFactor as a measure for load/store ports.
I also added a second flag -enable-cond-stores-vec. It will enable vectorization
of conditional stores. But there is no cost model for vectorization of
conditional stores in place yet so this will not do good at the moment.
rdar://15892953
Results for x86-64 -O3 -mavx +/- -mllvm -enable-loadstore-runtime-unroll
-vectorize-num-stores-pred=1 (before the BFI change):
Performance Regressions:
Benchmarks/Ptrdist/yacr2/yacr2 7.35% (maze3() is identical but 10% slower)
Applications/siod/siod 2.18%
Performance improvements:
mesa -4.42%
libquantum -4.15%
With a patch that slightly changes the register heuristics (by subtracting the
induction variable on both sides of the register pressure equation, as the
induction variable is probably not really unrolled):
Performance Regressions:
Benchmarks/Ptrdist/yacr2/yacr2 7.73%
Applications/siod/siod 1.97%
Performance Improvements:
libquantum -13.05% (we now also unroll quantum_toffoli)
mesa -4.27%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200270 91177308-0d34-0410-b5e6-96231b3b80d8
uint32.
When folding branches to common destination, the updated branch weights
can exceed uint32 by more than factor of 2. We should keep halving the
weights until they can fit into uint32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200262 91177308-0d34-0410-b5e6-96231b3b80d8
This brings MC into line with GNU 'as' on ARM, and it brings the ARM
target into line with most other LLVM targets, which declare the
initial CFI state with addInitialFrameState().
Without this, functions generated with .cfi_startproc/endproc on ARM
will tend to cause GDB to abort with:
gdb/dwarf2-frame.c:1132: internal-error: Unknown CFA rule.
I've also tested this by comparing the output of "readelf -w" on the
object files produced by llvm-mc and gas when given the .s file added
here.
This change is part of addressing PR18636.
Differential Revision: http://llvm-reviews.chandlerc.com/D2597
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200255 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This commit gives an address mode to the PLD instruction. We
were getting an assertion failure in the frame lowering code
because we had code that was doing a pld of a stack allocated
address. The frame lowering was checking the address mode and
then asserting because pld had none defined.
This commit fixes pld for arm mode. There was a previous fix for
thumb mode in a separate commit. The commit for thumb mode
added a test in a separate file because it would otherwise fail
for arm. This commit moves the thumb test back into the prefetch.ll
file and adds the corresponding arm test.
Differential Revision: http://llvm-reviews.chandlerc.com/D2622
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200248 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the DAGCombiner how to fold a sext/aext/zext dag node when
the operand in input is a build vector of constants (or UNDEFs).
The inability to fold a sext/zext of a constant build_vector was the root
cause of some pcg bugs affecting vselect expansion on x86-64 with AVX support.
Before this change, the DAGCombiner only knew how to fold a sext/zext/aext of a
ConstantSDNode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200234 91177308-0d34-0410-b5e6-96231b3b80d8
This commit allows LLVM MC to process .cfi_startproc directives when
they are followed by an additional `simple' identifier. This signals to
elide the emission of target specific CFI instructions that would
normally occur initially.
This fixes PR16587.
Differential Revision: http://llvm-reviews.chandlerc.com/D2624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200227 91177308-0d34-0410-b5e6-96231b3b80d8
cold loops as-if they were being optimized for size.
Nothing fancy here. Simply test case included. The nice thing is that we
can now incrementally build on top of this to drive other heuristics.
All of the infrastructure work is done to get the profile information
into this layer.
The remaining work necessary to make this a fully general purpose loop
unroller for very hot loops is to make it a fully general purpose loop
unroller. Things I know of but am not going to have time to benchmark
and fix in the immediate future:
1) Don't disable the entire pass when the target is lacking vector
registers. This really doesn't make any sense any more.
2) Teach the unroller at least and the vectorizer potentially to handle
non-if-converted loops. This is trivial for the unroller but hard for
the vectorizer.
3) Compute the relative hotness of the loop and thread that down to the
various places that make cost tradeoffs (very likely only the
unroller makes sense here, and then only when dealing with loops that
are small enough for unrolling to not completely blow out the LSD).
I'm still dubious how useful hotness information will be. So far, my
experiments show that if we can get the correct logic for determining
when unrolling actually helps performance, the code size impact is
completely unimportant and we can unroll in all cases. But at least
we'll no longer burn code size on cold code.
One somewhat unrelated idea that I've had forever but not had time to
implement: mark all functions which are only reachable via the global
constructors rigging in the module as optsize. This would also decrease
the impact of any more aggressive heuristics here on code size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200219 91177308-0d34-0410-b5e6-96231b3b80d8
to stabilize a test that really is trying to test generic behavior and
not a specific target's behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200215 91177308-0d34-0410-b5e6-96231b3b80d8
powers of two. This is essentially always the correct thing given the
impact on alignment, scaling factors that can be used in addressing
modes, etc. Also, fix the management of the unroll vs. small loop cost
to more accurately model things with this world.
Enhance a test case to actually exercise more of the unroll machinery if
using synthetic constants rather than a specific target model. Before
this change, with the added flags this test will unroll 3 times instead
of either 2 or 4 (the two sensible answers).
While I don't expect this to make a huge difference, if there are lots
of loops sitting right on the edge of hitting the 'small unroll' factor,
they might change behavior. However, I've benchmarked moving the small
loop cost up and down in many various ways and by a huge factor (2x)
without seeing more than 0.2% code size growth. Small adjustments such
as the series that led up here have led to about 1% improvement on some
benchmarks, but it is very close to the noise floor so I mostly checked
that nothing regressed. Let me know if you see bad behavior on other
targets but I don't expect this to be a sufficiently dramatic change to
trigger anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200213 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, this in turn led to some lower quality SCEVs due to some different paths through expression simplification, so add getUDivExactExpr and use it. This fixes all instances of the problems that I found, but we can make that function smarter as necessary.
Merge test "xor-and.ll" into "and-xor.ll" since I needed to update it anyways. Test 'nsw-offset.ll' analyzes a little deeper, %n now gets a scev in terms of %no instead of a SCEVUnknown.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200203 91177308-0d34-0410-b5e6-96231b3b80d8
Issue outcomes from DAGCombiner::MergeConsequtiveStores, more precisely from
mem-ops sequence sorting.
Consider, how MergeConsequtiveStores works for next example:
store i8 1, a[0]
store i8 2, a[1]
store i8 3, a[1] ; a[1] again.
return ; DAG starts here
1. Method will collect all the 3 stores.
2. It sorts them by distance from the base pointer (farthest with highest
index).
3. It takes first consecutive non-overlapping stores and (if possible) replaces
them with a single store instruction.
The point is, we can't determine here which 'store' instruction
would be the second after sorting ('store 2' or 'store 3').
It happens that 'store 3' would be the second, and 'store 2' would be the third.
So after merging we have the next result:
store i16 (1 | 3 << 8), base ; is a[0] but bit-casted to i16
store i8 2, a[1]
So actually we swapped 'store 3' and 'store 2' and got wrong contents in a[1].
Fix: In sort routine just also take into account mem-op sequence number.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200201 91177308-0d34-0410-b5e6-96231b3b80d8
editbin.exe and link.exe both accepts /highentropyva option to set this bit, so
doing s/VIRTUAL_ADDRESS/VA/ should make sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200191 91177308-0d34-0410-b5e6-96231b3b80d8
Placed the MC variant diagnostics in the wrong directory accidentally. Move
them into their respective architecture specific directories.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200161 91177308-0d34-0410-b5e6-96231b3b80d8
If a complex expression was passed to the .word directive and the first part of
the directive failed to parse, a secondary diagnostic would be produced that
would clutter the error diagnostics. Improve the diagnostics by consuming the
remainder of the statement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200160 91177308-0d34-0410-b5e6-96231b3b80d8
An emitted diagnostic for an invalid relocation variant would place the caret on
the token following the relocation variant indicator or at the end of the line
if there was no following token. This change corrects the placement of the
caret to point to the token.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200159 91177308-0d34-0410-b5e6-96231b3b80d8
These were:
* noreorder handling on the target object streamer and asm parser.
* setting the initial flag bits based on the enabled features.
* setting the elf header flag for micromips
It is *really* depressing I am the one doing this instead of someone at
mips actually taking the time to understand the infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200138 91177308-0d34-0410-b5e6-96231b3b80d8
The popc instruction is defined in the SPARCv9 instruction set
architecture, but it was emulated on CPUs older than Niagara 2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200131 91177308-0d34-0410-b5e6-96231b3b80d8
That bit is not documented in the PE/COFF spec published by Microsoft, so we
don't know the official name of it. I named this bit
IMAGE_DLL_CHARACTERISTICS_HIGH_ENTROPY_VIRTUAL_ADDRESS because the bit is
reported as "high entropy virtual address" by dumpbin.exe,
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200121 91177308-0d34-0410-b5e6-96231b3b80d8
PE32+ supports 64 bit address space, but the file format remains 32 bit.
So its file format is pretty similar to PE32 (32 bit executable). The
differences compared to PE32 are (1) the lack of "BaseOfData" field and
(2) some of its data members are 64 bit.
In this patch, I added a new member function to get a PE32+ Header object to
COFFObjectFile class and made llvm-readobj to use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200117 91177308-0d34-0410-b5e6-96231b3b80d8
