inserted to replace that value must dominate all of of the basic
blocks associated with the uses of the value in the PHI, not just
one of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74376 91177308-0d34-0410-b5e6-96231b3b80d8
This helps it avoid reusing an instruction that doesn't dominate all
of the users, in cases where the original instruction was inserted
before all of the users were known. This may result in redundant
expansions of sub-expressions that depend on loop-unpredictable values
in some cases, however this isn't very common, and it primarily impacts
IndVarSimplify, so GVN can be expected to clean these up.
This eliminates the need for IndVarSimplify's FixUsesBeforeDefs,
which fixes several bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74352 91177308-0d34-0410-b5e6-96231b3b80d8
terminator, instead of after the last phi. This fixes a bug
exposed by ScalarEvolution analyzing more kinds of loops.
This fixes PR4436.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74072 91177308-0d34-0410-b5e6-96231b3b80d8
trip counts in more cases.
Generalize ScalarEvolution's isLoopGuardedByCond code to recognize
And and Or conditions, splitting the code out into an
isNecessaryCond helper function so that it can evaluate Ands and Ors
recursively, and make SCEVExpander be much more aggressive about
hoisting instructions out of loops.
test/CodeGen/X86/pr3495.ll has an additional instruction now, but
it appears to be due to an arbitrary register allocation difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@74048 91177308-0d34-0410-b5e6-96231b3b80d8
now, this hasn't mattered, because ScalarEvolution hasn't been able
to compute trip counts for loops with multiple exits. But it will
soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73864 91177308-0d34-0410-b5e6-96231b3b80d8
induction variable when the addrec to be expanded does not require
a wider type. This eliminates the need for IndVarSimplify to
micro-manage SCEV expansions, because SCEVExpander now
automatically expands them in the form that IndVarSimplify considers
to be canonical. (LSR still micro-manages its SCEV expansions,
because it's optimizing for the target, rather than for
other optimizations.)
Also, this uses the new getAnyExtendExpr, which has more clever
expression simplification logic than the IndVarSimplify code it
replaces, and this cleans up some ugly expansions in code such as
the included masked-iv.ll testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73294 91177308-0d34-0410-b5e6-96231b3b80d8
integer and floating-point opcodes, introducing
FAdd, FSub, and FMul.
For now, the AsmParser, BitcodeReader, and IRBuilder all preserve
backwards compatability, and the Core LLVM APIs preserve backwards
compatibility for IR producers. Most front-ends won't need to change
immediately.
This implements the first step of the plan outlined here:
http://nondot.org/sabre/LLVMNotes/IntegerOverflow.txt
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72897 91177308-0d34-0410-b5e6-96231b3b80d8
in the case where a loop exit value cannot be computed, instead of only in
some cases while using SCEVCouldNotCompute in others. This simplifies
getSCEVAtScope's callers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72375 91177308-0d34-0410-b5e6-96231b3b80d8
one of the RecursivelyDeleteTriviallyDeadInstructions.
Add a comment explaining why the cache needs to be cleared.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72372 91177308-0d34-0410-b5e6-96231b3b80d8
leave the original comparison in place if it has other uses, since the
other uses won't be dominated by the new comparison instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72369 91177308-0d34-0410-b5e6-96231b3b80d8
Fix by clearing the rewriter cache before deleting the trivially dead
instructions.
Also make InsertedExpressions use an AssertingVH to catch these
bugs easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72364 91177308-0d34-0410-b5e6-96231b3b80d8
assuming that the use of the value is in a block dominated by the
"normal" destination. LangRef.html and other documentation sources
don't explicitly guarantee this, but it seems to be assumed in
other places in LLVM at least.
This fixes an assertion failure on the included testcase, which
is derived from the Ada testsuite.
FixUsesBeforeDefs is a temporary measure which I'm looking to
replace with a more capable solution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72266 91177308-0d34-0410-b5e6-96231b3b80d8
instructions. It attempts to create high-level multi-operand GEPs,
though in cases where this isn't possible it falls back to casting
the pointer to i8* and emitting a GEP with that. Using GEP instructions
instead of ptrtoint+arithmetic+inttoptr helps pointer analyses that
don't use ScalarEvolution, such as BasicAliasAnalysis.
Also, make the AddrModeMatcher more aggressive in handling GEPs.
Previously it assumed that operand 0 of a GEP would require a register
in almost all cases. It now does extra checking and can do more
matching if operand 0 of the GEP is foldable. This fixes a problem
that was exposed by SCEVExpander using GEPs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72093 91177308-0d34-0410-b5e6-96231b3b80d8
and generalize it so that it can be used by IndVarSimplify. Implement the
base IndVarSimplify transformation code using IVUsers. This removes
TestOrigIVForWrap and associated code, as ScalarEvolution now has enough
builtin overflow detection and folding logic to handle all the same cases,
and more. Run "opt -iv-users -analyze -disable-output" on your favorite
loop for an example of what IVUsers does.
This lets IndVarSimplify eliminate IV casts and compute trip counts in
more cases. Also, this happens to finally fix the remaining testcases
in PR1301.
Now that IndVarSimplify is being more aggressive, it occasionally runs
into the problem where ScalarEvolutionExpander's code for avoiding
duplicate expansions makes it difficult to ensure that all expanded
instructions dominate all the instructions that will use them. As a
temporary measure, IndVarSimplify now uses a FixUsesBeforeDefs function
to fix up instructions inserted by SCEVExpander. Fortunately, this code
is contained, and can be easily removed once a more comprehensive
solution is available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71535 91177308-0d34-0410-b5e6-96231b3b80d8
CallbackVH, with fixes. allUsesReplacedWith need to
walk the def-use chains and invalidate all users of a
value that is replaced. SCEVs of users need to be
recalcualted even if the new value is equivalent. Also,
make forgetLoopPHIs walk def-use chains, since any
SCEV that depends on a PHI should be recalculated when
more information about that PHI becomes available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70927 91177308-0d34-0410-b5e6-96231b3b80d8
makes ScalarEvolution::deleteValueFromRecords, and it's code that
subtly needed to be called before ReplaceAllUsesWith, unnecessary.
It also makes ValueDeletionListener unnecessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70645 91177308-0d34-0410-b5e6-96231b3b80d8
with the persistent insertion point, and change IndVars to make
use of it. This fixes a bug where IndVars was holding on to a
stale insertion point and forcing the SCEVExpander to continue to
use it.
This fixes PR4038.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69892 91177308-0d34-0410-b5e6-96231b3b80d8
have pointer types, though in contrast to C pointer types, SCEV
addition is never implicitly scaled. This not only eliminates the
need for special code like IndVars' EliminatePointerRecurrence
and LSR's own GEP expansion code, it also does a better job because
it lets the normal optimizations handle pointer expressions just
like integer expressions.
Also, since LLVM IR GEPs can't directly index into multi-dimensional
VLAs, moving the GEP analysis out of client code and into the SCEV
framework makes it easier for clients to handle multi-dimensional
VLAs the same way as other arrays.
Some existing regression tests show improved optimization.
test/CodeGen/ARM/2007-03-13-InstrSched.ll in particular improved to
the point where if-conversion started kicking in; I turned it off
for this test to preserve the intent of the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69258 91177308-0d34-0410-b5e6-96231b3b80d8
and sext over (iv | const), if a longer iv is
available. Allow expressions to have more than
one zext/sext parent. All from OpenSSL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69241 91177308-0d34-0410-b5e6-96231b3b80d8
sext around sext(shorter IV + constant), using a
longer IV instead, when it can figure out the
add can't overflow. This comes up a lot in
subscripting; mainly affects 64 bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@69123 91177308-0d34-0410-b5e6-96231b3b80d8
to more accurately describe what it does. Expand its doxygen comment
to describe what the backedge-taken count is and how it differs
from the actual iteration count of the loop. Adjust names and
comments in associated code accordingly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65382 91177308-0d34-0410-b5e6-96231b3b80d8
trip counts that use signed comparisons. It's not obviously the best
approach for preserving trip count information, and at any rate there
isn't anything in the tree right now that makes use of that, so for
now always using zero-extensions is preferable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65347 91177308-0d34-0410-b5e6-96231b3b80d8
-std-compile-opts sequence, this avoids the need for ScalarEvolution to
be rerun before LoopDeletion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@65318 91177308-0d34-0410-b5e6-96231b3b80d8
trip count value when the original loop iteration condition is
signed and the canonical induction variable won't undergo signed
overflow. This isn't required for correctness; it just preserves
more information about original loop iteration values.
Add a getTruncateOrSignExtend method to ScalarEvolution,
following getTruncateOrZeroExtend.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64918 91177308-0d34-0410-b5e6-96231b3b80d8
are multiple IV's in a loop, some of them may under go signed
or unsigned wrapping even if the IV that's used in the loop
exit condition doesn't. Restrict sign-extension-elimination
and zero-extension-elimination to only those that operate on
the original loop-controlling IV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64866 91177308-0d34-0410-b5e6-96231b3b80d8
modified in a way that may effect the trip count calculation. Change
IndVars to use this method when it rewrites pointer or floating-point
induction variables instead of using a doInitialization method to
sneak these changes in before ScalarEvolution has a chance to see
the loop. This eliminates the need for LoopPass to depend on
ScalarEvolution.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64810 91177308-0d34-0410-b5e6-96231b3b80d8
- Test for signed and unsigned wrapping conditions, instead of just
testing for non-negative induction ranges.
- Handle loops with GT comparisons, in addition to LT comparisons.
- Support more cases of induction variables that don't start at 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64532 91177308-0d34-0410-b5e6-96231b3b80d8
loop induction on LP64 targets. When the induction variable is
used in addressing, IndVars now is usually able to inserst a
64-bit induction variable and eliminates the sign-extending cast.
This is also useful for code using C "short" types for
induction variables on targets with 32-bit addressing.
Inserting a wider induction variable is easy; the tricky part is
determining when trunc(sext(i)) expressions are no-ops. This
requires range analysis of the loop trip count. A common case is
when the original loop iteration starts at 0 and exits when the
induction variable is signed-less-than a fixed value; this case
is now handled.
This replaces IndVarSimplify's OptimizeCanonicalIVType. It was
doing the same optimization, but it was limited to loops with
constant trip counts, because it was running after the loop
rewrite, and the information about the original induction
variable is lost by that point.
Rename ScalarEvolution's executesAtLeastOnce to
isLoopGuardedByCond, generalize it to be able to test for
ICMP_NE conditions, and move it to be a public function so that
IndVars can use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@64407 91177308-0d34-0410-b5e6-96231b3b80d8
This allows SCEV users to effectively calculate trip count.
LSR later on transforms back integer IVs to floating point IVs
later on to avoid int-to-float casts inside the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58625 91177308-0d34-0410-b5e6-96231b3b80d8
LoopPass*.
- Although less precise, this means they can be used in clients
without RTTI (who would otherwise need to include LoopPass.h, which
eventually includes things using dynamic_cast). This was the
simplest solution that presented itself, but I am happy to use a
better one if available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@58010 91177308-0d34-0410-b5e6-96231b3b80d8
several things that were neither in an anonymous namespace nor static
but not intended to be global.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51017 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, introduction of XXX::Create methods
for Users that have a potentially variable number of
Uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49277 91177308-0d34-0410-b5e6-96231b3b80d8
deleteValueFromRecords and loosen the types to all it to accept
Value* instead of just Instruction*, since this is what
ScalarEvolution uses internally anyway. This allows more flexibility
for future uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37657 91177308-0d34-0410-b5e6-96231b3b80d8
This created an ambiguity for expandInTy to decide when to use
sign-extension or zero-extension, but it turns out that most of its callers
don't actually need a type conversion, now that LLVM types don't have
explicit signedness. Drop expandInTy in favor of plain expand, and change
the few places that actually need a type conversion to do it themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37591 91177308-0d34-0410-b5e6-96231b3b80d8
Due to darwin gcc bug, one version of darwin linker coalesces
static const int, which defauts PassID based pass identification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36652 91177308-0d34-0410-b5e6-96231b3b80d8
would scan the entire loop body, then scan all users of instructions in the
loop, looking for users outside the loop. Now, since we know that the
loop is in LCSSA form, we know that any users outside the loop will be LCSSA
phi nodes. Just scan them.
This speeds up indvars significantly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34898 91177308-0d34-0410-b5e6-96231b3b80d8
the Transforms library. This reduces debug library size by 132 KB, debug
binary size by 376 KB, and reduces link time for llvm tools slightly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33939 91177308-0d34-0410-b5e6-96231b3b80d8
rename Type::getIntegralTypeMask to Type::getIntegerTypeMask.
This makes naming much more consistent. For example, there are now no longer any
instances of IntegerType that are not considered isInteger! :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33225 91177308-0d34-0410-b5e6-96231b3b80d8
Implement the arbitrary bit-width integer feature. The feature allows
integers of any bitwidth (up to 64) to be defined instead of just 1, 8,
16, 32, and 64 bit integers.
This change does several things:
1. Introduces a new Derived Type, IntegerType, to represent the number of
bits in an integer. The Type classes SubclassData field is used to
store the number of bits. This allows 2^23 bits in an integer type.
2. Removes the five integer Type::TypeID values for the 1, 8, 16, 32 and
64-bit integers. These are replaced with just IntegerType which is not
a primitive any more.
3. Adjust the rest of LLVM to account for this change.
Note that while this incremental change lays the foundation for arbitrary
bit-width integers, LLVM has not yet been converted to actually deal with
them in any significant way. Most optimization passes, for example, will
still only deal with the byte-width integer types. Future increments
will rectify this situation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33113 91177308-0d34-0410-b5e6-96231b3b80d8
This patch converts getPrimitiveSize to getPrimitiveSizeInBits where it is
appropriate to do so (comparison of integer primitive types).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33012 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces signed integer types with signless ones:
1. [US]Byte -> Int8
2. [U]Short -> Int16
3. [U]Int -> Int32
4. [U]Long -> Int64.
5. Removal of isSigned, isUnsigned, getSignedVersion, getUnsignedVersion
and other methods related to signedness. In a few places this warranted
identifying the signedness information from other sources.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32785 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes the SetCC instructions and replaces them with the ICmp
and FCmp instructions. The SetCondInst instruction has been removed and
been replaced with ICmpInst and FCmpInst.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32751 91177308-0d34-0410-b5e6-96231b3b80d8
converted, we lose a static initializer. This also allows GCC to emit warnings
about unused statistics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32690 91177308-0d34-0410-b5e6-96231b3b80d8
The long awaited CAST patch. This introduces 12 new instructions into LLVM
to replace the cast instruction. Corresponding changes throughout LLVM are
provided. This passes llvm-test, llvm/test, and SPEC CPUINT2000 with the
exception of 175.vpr which fails only on a slight floating point output
difference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@31931 91177308-0d34-0410-b5e6-96231b3b80d8
"LCSSA" phi node causes indvars to break dominance properties. This fixes
causes indvars to avoid inserting aggressive code in this case, instead
indvars should be fixed to be more aggressive in the face of lcssa phi's.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28850 91177308-0d34-0410-b5e6-96231b3b80d8
pointer recurrences into expressions from this:
%P_addr.0.i.0 = phi sbyte* [ getelementptr ([8 x sbyte]* %.str_1, int 0, int 0), %entry ], [ %inc.0.i, %no_exit.i ]
%inc.0.i = getelementptr sbyte* %P_addr.0.i.0, int 1 ; <sbyte*> [#uses=2]
into this:
%inc.0.i = getelementptr sbyte* getelementptr ([8 x sbyte]* %.str_1, int 0, int 0), int %inc.0.i.rec
Actually create something nice, like this:
%inc.0.i = getelementptr [8 x sbyte]* %.str_1, int 0, int %inc.0.i.rec
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16924 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
loop. This eliminates the extra add from the previous case, but it's
not clear that this will be a performance win overall. Tommorows test
results will tell. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13103 91177308-0d34-0410-b5e6-96231b3b80d8
structure to being dynamically computed on demand. This makes updating
loop information MUCH easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@13045 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of producing code like this:
Loop:
X = phi 0, X2
...
X2 = X + 1
if (X != N-1) goto Loop
We now generate code that looks like this:
Loop:
X = phi 0, X2
...
X2 = X + 1
if (X2 != N) goto Loop
This has two big advantages:
1. The trip count of the loop is now explicit in the code, allowing
the direct implementation of Loop::getTripCount()
2. This reduces register pressure in the loop, and allows X and X2 to be
put into the same register.
As a consequence of the second point, the code we generate for loops went
from:
.LBB2: # no_exit.1
...
mov %EDI, %ESI
inc %EDI
cmp %ESI, 2
mov %ESI, %EDI
jne .LBB2 # PC rel: no_exit.1
To:
.LBB2: # no_exit.1
...
inc %ESI
cmp %ESI, 3
jne .LBB2 # PC rel: no_exit.1
... which has two fewer moves, and uses one less register.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12961 91177308-0d34-0410-b5e6-96231b3b80d8
This also implements some new features for the indvars pass, including
linear function test replacement, exit value substitution, and it works with
a much more general class of induction variables and loops.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12620 91177308-0d34-0410-b5e6-96231b3b80d8
* Renamed StatisticReporter.h/cpp to Statistic.h/cpp
* Broke constructor to take two const char * arguments instead of one, so
that indendation can be taken care of automatically.
* Sort the list by pass name when printing
* Make sure to print all statistics as a group, instead of randomly when
the statistics dtors are called.
* Updated ProgrammersManual with new semantics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4002 91177308-0d34-0410-b5e6-96231b3b80d8
methods
* Eliminate AnalysisID: Now it is just a typedef for const PassInfo*
* Simplify how AnalysisID's are initialized
* Eliminate Analysis/Writer.cpp/.h: incorporate printing functionality into
the analyses themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@3116 91177308-0d34-0410-b5e6-96231b3b80d8
* Add new RegisterOpt/RegisterAnalysis templates for registering passes that
are to show up in opt or analyze
* Register Analyses now
* Change optimizations to use RegisterOpt instead of RegisterPass
* Add support for different "PassType's"
* Add new RegisterOpt/RegisterAnalysis templates for registering passes that
are to show up in opt or analyze
* Register Analyses now
* Change optimizations to use RegisterOpt instead of RegisterPass
* Remove getPassName implementations from various subclasses
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@3113 91177308-0d34-0410-b5e6-96231b3b80d8
- Rename runOnMethod to runOnFunction
* Transform getAnalysisUsageInfo into getAnalysisUsage
- Method is now const
- It now takes one AnalysisUsage object to fill in instead of 3 vectors
to fill in
- Pass's now specify which other passes they _preserve_ not which ones
they modify (be conservative!)
- A pass can specify that it preserves all analyses (because it never
modifies the underlying program)
* s/Method/Function/g in other random places as well
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@2333 91177308-0d34-0410-b5e6-96231b3b80d8
