I've done some experimentation with this, and it looks like using the
lower-latency (but lower throughput) copy instruction is essentially always the
right thing to do.
My assumption is that, in order to be relatively sure that the higher-latency
copy will increase throughput, we'd want to have it unlikely to be in-flight
with its use. On the P7, the global completion table (GCT) can hold a maximum
of 120 instructions, shared among all active threads (up to 4), giving 30
instructions per thread. So specifically, I'd require at least that many
instructions between the copy and the use before the high-latency variant is
used.
Trying this, however, over the entire test suite resulted in zero cases where
the high-latency form would be preferable. This may be a consequence of the
fact that the scheduler views copies as free, and so they tend to end up close
to their uses. For this experiment I created a function:
unsigned chooseVSXCopy(MachineBasicBlock &MBB,
MachineBasicBlock::iterator I,
unsigned DestReg, unsigned SrcReg,
unsigned StartDist = 1,
unsigned Depth = 3) const;
with an implementation like:
if (!Depth)
return PPC::XXLOR;
const unsigned MaxDist = 30;
unsigned Dist = StartDist;
for (auto J = I, JE = MBB.end(); J != JE && Dist <= MaxDist; ++J) {
if (J->isTransient() && !J->isCopy())
continue;
if (J->isCall() || J->isReturn() || J->readsRegister(DestReg, TRI))
return PPC::XXLOR;
++Dist;
}
// We've exceeded the required distance for the high-latency form, use it.
if (Dist > MaxDist)
return PPC::XVCPSGNDP;
// If this is only an exit block, use the low-latency form.
if (MBB.succ_empty())
return PPC::XXLOR;
// We've reached the end of the block, check the successor blocks (up to some
// depth), and use the high-latency form if that is okay with all successors.
for (auto J = MBB.succ_begin(), JE = MBB.succ_end(); J != JE; ++J) {
if (chooseVSXCopy(**J, (*J)->begin(), DestReg, SrcReg,
Dist, --Depth) == PPC::XXLOR)
return PPC::XXLOR;
}
// All of our successor blocks seem okay with the high-latency variant, so
// we'll use it.
return PPC::XVCPSGNDP;
and then changed the copy opcode selection from:
Opc = PPC::XXLOR;
to:
Opc = chooseVSXCopy(MBB, std::next(I), DestReg, SrcReg);
In conclusion, I'm removing the FIXME from the comment, because I believe that
there is, at least absent other examples, nothing to fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204591 91177308-0d34-0410-b5e6-96231b3b80d8
This is a pretty straight forward translation for COFF, we just need to
stick the function in a COMDAT section marked as
IMAGE_COMDAT_SELECT_NODUPLICATES.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204565 91177308-0d34-0410-b5e6-96231b3b80d8
When VSX is available, these instructions should be used in preference to the
older variants that only have access to the scalar floating-point registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204559 91177308-0d34-0410-b5e6-96231b3b80d8
Since the profile can come from 32-bit machines, we need to check the
pointer size. Change the magic number to facilitate this.
Adds tests for reading 32-bit and 64-bit binaries (both big- and
little-endian). The tests write a binary using printf in RUN lines
(like raw-magic-but-no-header.test). Assuming the bots don't complain,
this seems like a better way forward for testing RawInstrProfReader than
committing binary files.
<rdar://problem/16400648>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204557 91177308-0d34-0410-b5e6-96231b3b80d8
This is similar, but not identical to what gas does. The logic in MC is to just
compute the symbol table after parsing the entire file. GAS is mixed, given
.type b, @object
a = b
b:
.type b, @function
It will propagate the change and make 'a' a function. Given
.type b, @object
b:
a = b
.type b, @function
the type of 'a' is still object.
Since we do the computation in the end, we produce a function in both cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204555 91177308-0d34-0410-b5e6-96231b3b80d8
Some text shows up on stderr when using guard malloc, and this test
was trying to treat that as input to llvm-profdata show. There's no
reason to pipe stderr into show at all here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204549 91177308-0d34-0410-b5e6-96231b3b80d8
When a label is parsed, check if there is type information available for the
label. If so, check if the symbol is a function. If the symbol is a function
and we are in thumb mode and no explicit thumb_func has been emitted, adjust the
symbol data to indicate that the function definition is a thumb function.
The application of this inferencing is improved value handling in the object
file (the required thumb bit is set on symbols which are thumb functions). It
also helps improve compatibility with binutils.
The one complication that arises from this handling is the MCAsmStreamer. The
default implementation of getOrCreateSymbolData in MCStreamer does not support
tracking the symbol data. In order to support the semantics of thumb functions,
track symbol data in assembly streamer. Although O(n) in number of labels in
the TU, this is already done in various other streamers and as such the memory
overhead is not a practical concern in this scenario.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204544 91177308-0d34-0410-b5e6-96231b3b80d8
v2f64 values, like other 128-bit values, are returned under VSX in register
vs34 (Altivec register v2).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204543 91177308-0d34-0410-b5e6-96231b3b80d8
When an instruction's operand list does not have a sufficient number of
operands to match with all of the variables that contribute to its
encoding, instead of asserting inside a call to getSubOperandNumber, produce an
informative error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204542 91177308-0d34-0410-b5e6-96231b3b80d8
The cleanup code that removes dead cast instructions only removed them from the
basic block, but didn't delete them. This fix erases them now too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204538 91177308-0d34-0410-b5e6-96231b3b80d8
A PHI node usually has only one value/basic block pair per incoming basic block.
In the case of a switch statement it is possible that a following PHI node may
have more than one such pair per incoming basic block. E.g.:
%0 = phi i64 [ 123456, %case2 ], [ 654321, %Entry ], [ 654321, %Entry ]
This is valid and the verfier doesn't complain, because both values are the
same.
Constant hoisting materializes the constant for each operand separately and the
value is still the same, but the variable names have changed. As a result the
verfier can't recognize anymore that they are the same value and complains.
This fix adds special update code for PHI node in constant hoisting to prevent
this corner case.
This fixes <rdar://problem/16394449>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204537 91177308-0d34-0410-b5e6-96231b3b80d8
This patch renames method 'isConstantSplat' as 'getConstantSplatValue'
(mainly for consistency reasons), and rewrites its logic to ensure
that we always perform a legal 'cast<ConstantSDNode>'.
Added test shift-combine-crash.ll to verify that DAGCombiner no longer crashes with an assertion failure in the attempt to simplify a vector shift by a vector of all undef counts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204536 91177308-0d34-0410-b5e6-96231b3b80d8
sym_a:
sym_d = sym_a + 1
This is the smallest fix I was able to extract from what got reverted in
r204203.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204527 91177308-0d34-0410-b5e6-96231b3b80d8
We make sure a spill is not hoisted to a hotter outer loop by adding
a condition. Hoist a spill to outer loop if there are multiple dependents
(it can be beneficial if more than one dependents are hoisted) or
if DepSV (the hoisting source) is hotter than SV (the hoisting destination).
rdar://16268194
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204522 91177308-0d34-0410-b5e6-96231b3b80d8
Cleanup the current binary testcase for profile data.
- Rename it to something more specific.
- Remove the text comparison.
- Check the output of llvm-profdata show.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204518 91177308-0d34-0410-b5e6-96231b3b80d8
Include non-text characters in the magic number so that text files can't
match.
<rdar://problem/15950346>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204513 91177308-0d34-0410-b5e6-96231b3b80d8
Type units have no addresses, so there's no need for DW_AT_addr_base.
This removes another relocation from every skeletal type unit and brings
LLVM's skeletal type units in line with GCC's (containing only
GNU_dwo_name (strp), comp_dir (strp), and GNU_pubnames (flag_present)).
Cary's got some ideas about using str_index in the .o file to reduce
those last two relocations (well, replace two relocations with one
relocation (pointing to the string index) and two indicies)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204506 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, only regular AArch64 instructions were annotated with SchedRW lists.
This patch does the same for NEON enabling these instructions to be scheduled by
the MIScheduler. Additionally, store operations are now modeled and a few
SchedRW lists were updated for bug fixes (e.g. multiple def operands).
Reviewers: apazos, mcrosier, atrick
Patch by Dave Estes <cestes@codeaurora.org>!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204505 91177308-0d34-0410-b5e6-96231b3b80d8
Read a raw binary profile that corresponds to a memory dump from the
runtime profile.
The test is a binary file generated from
cfe/trunk/test/Profile/c-general.c with the new compiler-rt runtime and
the matching text version of the input. It includes instructions on how
to regenerate.
<rdar://problem/15950346>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204496 91177308-0d34-0410-b5e6-96231b3b80d8
