fast-isel before emitting code. If the program bails after code was emitted,
then it could lead to the stack being adjusted more than once (two
CALLSEQ_BEGINs emitted) but being adjuste back only once after the call. This
leads to general badness and gnashing of teeth.
<rdar://problem/11050630>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152959 91177308-0d34-0410-b5e6-96231b3b80d8
It's not a good style idea, as the registers will be laid down in memory in
numerical order, not the order they're in the list, but it's legal. vldm/vstm
are stricter.
rdar://11064740
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152943 91177308-0d34-0410-b5e6-96231b3b80d8
alignment. If that's the case, then we want to make sure that we don't increase
the alignment of the store instruction. Because if we increase it to be "more
aligned" than the pointer, code-gen may use instructions which require a greater
alignment than the pointer guarantees.
<rdar://problem/11043589>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152907 91177308-0d34-0410-b5e6-96231b3b80d8
It was added in 2007 as the first cut at supporting no-inline
attributes, but we didn't have function attributes of any form at the
time. However, it was added without any mention in the LangRef or other
documentation.
Later on, in 2008, Devang added function notes for 'inline=never' and
then turned them into proper function attributes. From that point
onward, as far as I can tell, the world moved on, and no one has touched
'llvm.noinline' in any meaningful way since.
It's time has now come. We have had better mechanisms for doing this for
a long time, all the frontends I'm aware of use them, and this is just
holding back progress. Given that it was never a documented feature of
the IR, I've provided no auto-upgrade support. If people know of real,
in-the-wild bitcode that relies on this, yell at me and I'll add it, but
I *seriously* doubt anyone cares.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152904 91177308-0d34-0410-b5e6-96231b3b80d8
directly query the function information which this set was representing.
This simplifies the interface of the inline cost analysis, and makes the
always-inline pass significantly more efficient.
Previously, always-inline would first make a single set of every
function in the module *except* those marked with the always-inline
attribute. It would then query this set at every call site to see if the
function was a member of the set, and if so, refuse to inline it. This
is quite wasteful. Instead, simply check the function attribute directly
when looking at the callsite.
The normal inliner also had similar redundancy. It added every function
in the module with the noinline attribute to its set to ignore, even
though inside the cost analysis function we *already tested* the
noinline attribute and produced the same result.
The only tricky part of removing this is that we have to be able to
correctly remove only the functions inlined by the always-inline pass
when finalizing, which requires a bit of a hack. Still, much less of
a hack than the set of all non-always-inline functions was. While I was
touching this function, I switched a heavy-weight set to a vector with
sort+unique. The algorithm already had a two-phase insert and removal
pattern, we were just needlessly paying the uniquing cost on every
insert.
This probably speeds up some compiles by a small amount (-O0 compiles
with lots of always-inline, so potentially heavy libc++ users), but I've
not tried to measure it.
I believe there is no functional change here, but yell if you spot one.
None are intended.
Finally, the direction this is going in is to greatly simplify the
inline cost query interface so that we can replace its implementation
with a much more clever one. Along the way, all the APIs get simplified,
so it seems incrementally good.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152903 91177308-0d34-0410-b5e6-96231b3b80d8
analysis implementation. The header was already separated. Also cleanup
all the comments in the header to follow a nice modern doxygen form.
There is still plenty of cruft here, but some of that will fall out in
subsequent refactorings and this was an easy step in the right
direction. No functionality changed here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152898 91177308-0d34-0410-b5e6-96231b3b80d8
These edges are not really necessary, but it is consistent with the
way we currently create physreg edges. Scheduler heuristics that
expect a DAG edge to the block terminator could benefit from this
change. Although in the future I hope we have a better mechanism for
modeling latency across scheduling regions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152895 91177308-0d34-0410-b5e6-96231b3b80d8
Only record IVUsers that are dominated by simplified loop
headers. Otherwise SCEVExpander will crash while looking for a
preheader.
I previously tried to work around this in LSR itself, but that was
insufficient. This way, LSR can continue to run if some uses are not
in simple loops, as long as we don't attempt to analyze those users.
Fixes <rdar://problem/11049788> Segmentation fault: 11 in LoopStrengthReduce
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152892 91177308-0d34-0410-b5e6-96231b3b80d8
on our internal nightly testers. So, basically revert r152486 again.
Abbreviated original commit message:
Implement a more intelligent way of spilling uses across an invoke boundary.
It looks as if Chander's inlining work, r152737, exposed an issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152887 91177308-0d34-0410-b5e6-96231b3b80d8
It caused MSP430DAGToDAGISel::SelectIndexedBinOp() to be miscompiled.
When two ReplaceUses()'s are expanded as inline, vtable in base class is stored to latter (ISelUpdater)ISU.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152877 91177308-0d34-0410-b5e6-96231b3b80d8
theoretical fix since it only matters for types with >= 2^63 bits (!) and also
only matters if pointers have more than 64 bits, which is not supported anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152831 91177308-0d34-0410-b5e6-96231b3b80d8
This needs a test, but it will take some time to figure
out the best way to get an input that will produce > 2^16 relocs.
Patch by Graydon Hoare!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152787 91177308-0d34-0410-b5e6-96231b3b80d8
out the DW_AT_name. Older gdbs unfortunately still use it to
disambiguate member functions in templated classes (gdb.cp/templates.exp).
rdar://11043421 (which is now deferred for a bit)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152782 91177308-0d34-0410-b5e6-96231b3b80d8
changed since. No one was using it. It is yet another consumer of the
InlineCost interface that I'd like to change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152769 91177308-0d34-0410-b5e6-96231b3b80d8
essentially sorting the pair's arguments. I'd love to actually call sort
here, but I'm just not that crazy. ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152764 91177308-0d34-0410-b5e6-96231b3b80d8