the function type, instead they belong to functions
and function calls. This is an updated and slightly
corrected version of Reid Spencer's original patch.
The only known problem is that auto-upgrading of
bitcode files doesn't seem to work properly (see
test/Bitcode/AutoUpgradeIntrinsics.ll). Hopefully
a bitcode guru (who might that be? :) ) will fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44359 91177308-0d34-0410-b5e6-96231b3b80d8
from a file containing Function/BasicBlock pairings. This is not safe against
anonymous or abnormally-named Funcs or BBs.
Make bugpoint use this interface to pass the BBs list to the child bugpoint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44101 91177308-0d34-0410-b5e6-96231b3b80d8
access to bits). Use them in place of float and
double interfaces where appropriate.
First bits of x86 long double constants handling
(untested, probably does not work).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41858 91177308-0d34-0410-b5e6-96231b3b80d8
Use APFloat in UpgradeParser and AsmParser.
Change all references to ConstantFP to use the
APFloat interface rather than double. Remove
the ConstantFP double interfaces.
Use APFloat functions for constant folding arithmetic
and comparisons.
(There are still way too many places APFloat is
just a wrapper around host float/double, but we're
getting there.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@41747 91177308-0d34-0410-b5e6-96231b3b80d8
This also changes the syntax for llvm.bswap, llvm.part.set, llvm.part.select, and llvm.ct* intrinsics. They are automatically upgraded by both the LLVM ASM reader and the bitcode reader. The test cases have been updated, with special tests added to ensure the automatic upgrading is supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@40807 91177308-0d34-0410-b5e6-96231b3b80d8
Note: FastDSE now equals or exceeds the results of old DSE on all of SPEC2000 and SPEC2006. Unless major problems
show up in the testers, it will likely completely replace old DSE in the near future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@39986 91177308-0d34-0410-b5e6-96231b3b80d8
right so there is no need to duplicate logic, just use the values the makefile
provides.
Eliminate some redundnt -D options from the output.
Fix the help output so it fits on 80 cols.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@38488 91177308-0d34-0410-b5e6-96231b3b80d8
--enable-expensive-checks allows the developer to enable runtime
checking that can greatly increase compile time. Currently it only
turns on _GLIBCXX_DEBUG. Other expensive debugging checks added later
should be controlled by this configure option.
This patch also updates llvm-config with a --cppflags option to inform
llvm-gcc how to build itself so that it is compatible with an llvm that
was built with _GLIBCXX_DEBUG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37777 91177308-0d34-0410-b5e6-96231b3b80d8
Use a better determinator for identifying constant array initializers that
are or are not zero terminated and generate code appropriately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37720 91177308-0d34-0410-b5e6-96231b3b80d8
Use SmallPtrSet instead of std::vector to eliminate duplicate uses in a
function generated with -gen-function. This prevents the output from having
multiple duplicate declarations of constants and gvals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37616 91177308-0d34-0410-b5e6-96231b3b80d8
When printing the uses of a function (-gen-function only), make sure to
include the constants referenced by intializers of global variables.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@37615 91177308-0d34-0410-b5e6-96231b3b80d8
Due to darwin gcc bug, one version of darwin linker coalesces
static const int, which defauts PassID based pass identification.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36652 91177308-0d34-0410-b5e6-96231b3b80d8
anything about disk I/O itself. This greatly simplifies its interface -
eliminating the need for the ReaderWrappers.cpp file.
This adds a new option to llvm-dis (-bitcode) which instructs it to read
the input file as bitcode. Until/unless the bytecode reader is taught to
read from MemoryBuffer, there is no way to handle stdin reading without it.
I don't plan to switch the bytecode reader over, I'd rather delete it :),
so the option will stay around temporarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36554 91177308-0d34-0410-b5e6-96231b3b80d8
MultiSource/Applications/minisat in the JIT.
Note that the libsystem stuff should ideally never modify errno. :(
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36508 91177308-0d34-0410-b5e6-96231b3b80d8
Make ParamAttrsList objects unique. You can no longer directly create or
destroy them but instead must go through the ParamAttrsList::get()
interface.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36327 91177308-0d34-0410-b5e6-96231b3b80d8
Functions without names deserve to be created too. This fixes:
test/CodeGen/Generic/vector-constantexpr.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36105 91177308-0d34-0410-b5e6-96231b3b80d8
When upgrading global vars, look for conflicts with functions as well. This
fixes test/Transforms/GlobalDCE/2002-08-17-FunctionDGE.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36103 91177308-0d34-0410-b5e6-96231b3b80d8
Rewrite the upgrade of GEP indices to be a little less obtuse. This fixes
test/Assembler/2002-08-19-BytecodeReader.llx
test/Assembler/2003-08-21-ConstantExprCast-Fold.llx
test/Assembler/2004-01-11-getelementptrfolding.llx
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@36095 91177308-0d34-0410-b5e6-96231b3b80d8
Put the parameter attributes in their own ParamAttr name space. Adjust the
rest of llvm as a result.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35877 91177308-0d34-0410-b5e6-96231b3b80d8
Change uses of sys::Path class to sys::PathWithStatus in those places where
the file status information is needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35743 91177308-0d34-0410-b5e6-96231b3b80d8
For the short CALL/INVOKE syntax, the signedness of the result type is two
extractions away from the type argument because its a POINTER to function
type, not a function type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35735 91177308-0d34-0410-b5e6-96231b3b80d8
Rename LinkItems as NativeLinkItems since it is filled out by the Linker
library to contain only those items deemed to be native.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35654 91177308-0d34-0410-b5e6-96231b3b80d8
Make the sys::Path::getFileStatus function more efficient by having it
return a pointer to the FileStatus structure rather than copy it. Adjust
uses of the function accordingly. Also, fix some memory issues in sys::Path.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35476 91177308-0d34-0410-b5e6-96231b3b80d8
Okay, really fix it this time. Make sure the CurFun.Linkage is set early
and consolidate some duplicate code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35236 91177308-0d34-0410-b5e6-96231b3b80d8
Make Signedness information pervasive throughout all types and values.
There is no easy way to get around this. Because the GEP instruction can
index through an arbitrarily complex value structure, it is necessary to
keep track of signedness information throughout that structure. This change
makes Signedness a full class, capable of representing Signedness in
arbitrarily shaped types. The class is then used throughout llvm-upgrade to
track signedness and differentiate between globals, locals, and functions
based on their signedness.
For PR1243:
This patch also removes bogus warnings about renaming internal globals. It
now only emits such warnings when renaming non-internal globals because
they may affect linkage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35234 91177308-0d34-0410-b5e6-96231b3b80d8
last entry stored in the map could be retrieved for a given integer type.
Propagating the sign information required an invasive change to ensure that
all ValueRef (ValID) instances get the right sign information as well. Also,
put in some assertions to ensure the RenameMap always gives us out the type
that is expected.
This fixes PR1256 and
test/Assembler/2007-03-14-UgpradeLocalSignless.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35112 91177308-0d34-0410-b5e6-96231b3b80d8
reading bytecode.
2. The interpreter can delete the ModuleProvider and replace it with
another so don't depend on it being around after the EE is created.
3. Don't just run llvm_shutdown on exit but actually delete the EE as well.
This cleans up a vast amount of memory (but not all) that EE retained
through exit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34888 91177308-0d34-0410-b5e6-96231b3b80d8
Since CompilerDriver.cpp revision 1.44, llvmc must be linked against LLVMCore.a (llvm::Module::~Module) and LLVMBCReader.a
(llvm::getBytecodeModuleProvider).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34196 91177308-0d34-0410-b5e6-96231b3b80d8
Make llvm-ld more gccld-like by having it run the same set of passes. The
delta was probably due to lack of llvm-ld being maintained. Just another
reason to have only one optimizing linker in in LLVM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34058 91177308-0d34-0410-b5e6-96231b3b80d8
Always rename, never give a redef error. We could check for collapsed type
planes and generate an error if that's not the cause, but the 99.9999
percentile case will be that its the result of collapsed type planes. So,
rather than doing an expensive check, just rename.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34047 91177308-0d34-0410-b5e6-96231b3b80d8
Some changes to get the smbd.ll test case working:
1. Move the logic for CSRETCC->sret attribute out of the ResolveDefinitions
code and into getExistingValue. This resolves it much earlier and works
in function scope as well.
2. Fix handling of CSRETCC->sret for the store instruction.
3. Rewrite the code for handling renaming to factor in linkage types.
4. Rename a structure filed for a PATypeInfo* so it doesn't get confused
with a field for a Type*.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34043 91177308-0d34-0410-b5e6-96231b3b80d8
When a naming conflict arises, allow internal linkage functions to be
renamed without warning or error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34024 91177308-0d34-0410-b5e6-96231b3b80d8
Allow @ before identifer names. Recognize the i1, i8, i16, i32, i64 keywords
as type names corresponding to bool, ubyte, ushort, uint, and ulong
respectively. While these aren't LLVM 1.9 constructs, permitting the syntax
allows post-1.9 assembly files to be upgraded.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34023 91177308-0d34-0410-b5e6-96231b3b80d8
api's look like this:
ModuleProvider *getBytecodeModuleProvider(
const std::string &Filename, ///< Name of file to be read
BCDecompressor_t *BCDC = Compressor::decompressToNewBuffer,
std::string* ErrMsg = 0, ///< Optional error message holder
BytecodeHandler* H = 0 ///< Optional handler for reader events
);
This is ugly, but allows a client to say:
getBytecodeModuleProvider("foo", 0);
If they do this, there is no dependency on the compression libraries, saving
codesize.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@34012 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces the SymbolTable class with ValueSymbolTable which does
not support types planes. This means that all symbol names in LLVM must now
be unique. The patch addresses the necessary changes to deal with this and
removes code no longer needed as a result. This completes the bulk of the
changes for this PR. Some cleanup patches will follow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33918 91177308-0d34-0410-b5e6-96231b3b80d8
Make llvm-upgrade valgrind clean. Deleting type instances is a really
nasty thing to do to LLVM. This was a hold-over from the re-write.
This fixes test/Assembler/2007-01-22-UpgradeTypeMapInvalidMemory.ll and
potentially many other bugs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33858 91177308-0d34-0410-b5e6-96231b3b80d8
Removing -raise has neglible positive or negative side effects so we are
opting to remove it. See the PR for comparison details.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33844 91177308-0d34-0410-b5e6-96231b3b80d8
1. Allow -- as well as - options (Bill Wendling)
2. Pass unrecognized options to opt and let it handle the errors, if any
(Chris Lattner).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33798 91177308-0d34-0410-b5e6-96231b3b80d8
Step 1: Copy gccas functionality to opt. This endows opt with a new
-std-compile-opts option to get the set of optimization passes that
gccas used. It also adds -disable-inlining and -disable-opt which
both apply only if -std-compile-opts is given. The -strip-debug option
was also removed. It just makes sure that "-strip" gets done early and
is mostly there for compatibility with gccas. Finally, a new
-verify-each option will cause the verify pass to be run after each pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33786 91177308-0d34-0410-b5e6-96231b3b80d8
This feature is needed in order to support shifts of more than 255 bits
on large integer types. This changes the syntax for llvm assembly to
make shl, ashr and lshr instructions look like a binary operator:
shl i32 %X, 1
instead of
shl i32 %X, i8 1
Additionally, this should help a few passes perform additional optimizations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33776 91177308-0d34-0410-b5e6-96231b3b80d8
When an unresolved definition is found, check to see if it is only unresolved
because the csretcc was upgraded to the sret param attribute. Such changes
change the function type and lead to unresolved definitions. In such cases, just
cast the function to the type expected by the CallInst. That is, cast to the
version of the function that has the sret param attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33623 91177308-0d34-0410-b5e6-96231b3b80d8
1. New parameter attribute called 'inreg'. It has meaning "place this
parameter in registers, if possible". This is some generalization of
gcc's regparm(n) attribute. It's currently used only in X86-32 backend.
2. Completely rewritten CC handling/lowering code inside X86 backend.
Merged stdcall + c CCs and fastcall + fast CC.
3. Dropped CSRET CC. We cannot add struct return variant for each
target-specific CC (e.g. stdcall + csretcc and so on).
4. Instead of CSRET CC introduced 'sret' parameter attribute. Setting in
on first attribute has meaning 'This is hidden pointer to structure
return. Handle it gently'.
5. Fixed small bug in llvm-extract + add new feature to
FunctionExtraction pass, which relinks all internal-linkaged callees
from deleted function to external linkage. This will allow further
linking everything together.
NOTEs: 1. Documentation will be updated soon.
2. llvm-upgrade should be improved to translate csret => sret.
Before this, there will be some unexpected test fails.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33597 91177308-0d34-0410-b5e6-96231b3b80d8
When a value is found to have the same name as another, try harder to
disambiguate when its a type plane collapse issue and when it isn't. We
traverse the type to see if it contains an integer. If it does not then
we issue the error because it can't be resulting from integer type planes
collapsing. Otherwise we just rename it, even if that's a bit of overkill.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33594 91177308-0d34-0410-b5e6-96231b3b80d8
otherwise it gets ignored.
This fixes test/CodeGen/X86/2006-05-11-InstrSched.ll
Thanks to Evan Cheng for noticing this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33546 91177308-0d34-0410-b5e6-96231b3b80d8
PR645
PR761
PR1082
PR1122
Completely rewrite llvm-upgrade. This should be its final design. Any future
changes will use this same design. The changes involve the following:
1. Make this work very much like the 1.9 AsmParser
2. Retain old upgrades dating back to release 1.2 time frame.
3. Merge in some of the upgrades between 1.9 and 2.0 (e.g. icmp/fcmp).
4. Attach a Signedness value (Signless, Unsigned, Signed) to every type,
Value, Constant, Instruction, and list of those things in the Parser.
Use these to make signedness decisions for instruction upgrades.
5. Implement unique name upgrade for function values and global values.
6. Identify rename cases that might cause problems and warn about them.
For example: renaming a global variable with external linkage.
7. Generate a 2.0 IR using VMCore. This is necessary for numerous
reasons and has the advantage that it never goes out of date.
8. Use the AsmPrinter to make the output nice.
9. Clean up error and warning messages from 1.9 form.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33531 91177308-0d34-0410-b5e6-96231b3b80d8
instcombine to clean up the code, which makes more code suitable for SRoA.
This helps C++ code in particular, e.g. speeding up tramp3d by 31%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33235 91177308-0d34-0410-b5e6-96231b3b80d8
Increment the counter after the second use, not after the first use. This
fixes PR1113.
Also, rename some classes for simplicity and to more naturally be
reminscient of LLVM 1.9. This in preparation for additional classes that
will provide a scaled down model of the LLVM 1.9 IR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33226 91177308-0d34-0410-b5e6-96231b3b80d8
rename Type::getIntegralTypeMask to Type::getIntegerTypeMask.
This makes naming much more consistent. For example, there are now no longer any
instances of IntegerType that are not considered isInteger! :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33225 91177308-0d34-0410-b5e6-96231b3b80d8
like a lot, its really only two changes:
1. Move stuff that should be private to .y out of the .h file.
2. Make all semantic values pointers.
This cleans up the silly destroy methods and changes them to delete. It
also moves the TypeInfo and ValueInfo classes into the .y where we can
modify them more readily because they have no clients any more.
This shouldn't result in any functional changes in llvm-upgrade.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@33211 91177308-0d34-0410-b5e6-96231b3b80d8