This will allow inlining get_magic, which should in turn fix one of the mingw
build problems after the switch to std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210712 91177308-0d34-0410-b5e6-96231b3b80d8
The idea of this patch is to turn llvm/Support/system_error.h into a
transitional header that just brings in the erorr_code api to the llvm
namespace. I will remove it shortly afterwards.
The cases where the general idea needed some tweaking:
* std::errc is a namespace in msvc, so we cannot use "using std::errc". I could
add an #ifdef, but there were not that many uses, so I just added std:: to
them in this patch.
* Template specialization had to be moved to the std namespace in this
patch set already.
* The msvc implementation of default_error_condition doesn't seem to
provide the same transformations as we need. Not too surprising since
the standard doesn't actually say what "equivalent" means. I fixed the
problem by keeping our old mapping and using it at error_code
construction time.
Despite these shortcomings I think this is still a good thing. Some reasons:
* The different implementations of system_error might improve over time.
* It removes 925 lines of code from llvm already.
* It removes 6313 bytes from the text segment of the clang binary when
it is built with gcc and 2816 bytes when building with clang and
libstdc++.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210687 91177308-0d34-0410-b5e6-96231b3b80d8
Some c++ libraries (libstdc++ at least) don't seem to map to the generic
category in in the system_category's default_error_condition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210635 91177308-0d34-0410-b5e6-96231b3b80d8
MSVC doesn't seem to provide any is_error_code_enum enumeration for the
windows errors.
Fortunately very few places in llvm have to handle raw windows errors, so
we can just construct the corresponding error_code directly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210631 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes the functions llvm_start_multithreaded() and
llvm_stop_multithreaded(), and changes llvm_is_multithreaded()
to return a constant value based on the value of the compile-time
definition LLVM_ENABLE_THREADS.
Previously, it was possible to have compile-time support for
threads on, and runtime support for threads off, in which case
certain mutexes were not allocated or ever acquired. Now, if the
build is created with threads enabled, mutexes are always acquired.
A test before/after patch of compiling a very large TU showed no
noticeable performance impact of this change.
Reviewers: rnk
Differential Revision: http://reviews.llvm.org/D4076
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210600 91177308-0d34-0410-b5e6-96231b3b80d8
Because we don't have a separate negate( ) function, 0 - NaN does double-duty as the IEEE-754 negate( ) operation, which (unlike most FP ops) *does* attach semantic meaning to the signbit of NaN.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210428 91177308-0d34-0410-b5e6-96231b3b80d8
Avoid changing behaviour for everyone who's used to the traditional ghostview
UI, especially since it knows how to stay in the foreground unlike xdg-open.
Amendment to r210147.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210148 91177308-0d34-0410-b5e6-96231b3b80d8
This runs a suitable viewer on Unix desktop environments specified by
Freedesktop.org (GNOME, KDE, Linux distributions etc.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210147 91177308-0d34-0410-b5e6-96231b3b80d8
Amend r210001 to use the classic fallback order behaviour if the requested
graphing program isn't found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210003 91177308-0d34-0410-b5e6-96231b3b80d8
Replace the crufty build-time configure checks for program paths with
equivalent runtime logic.
This lets users install graphing tools as needed without having to reconfigure
and rebuild LLVM, while eliminating a long chain of inappropriate compile
dependencies that included GUI programs and the windowing system.
Additional features:
* Support the OS X 'open' command to view graphs generated by any of the
Graphviz utilities. This is an alternative to the Graphviz OS X UI which is
no longer available on Mountain Lion.
* Produce informative log output upon failure to indicate which programs can
be installed to view graphs.
Ping me if this doesn't work for your particular environment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210001 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce the support structures necessary to deal with the Windows ARM EH data.
These definitions are extremely aggressive about assertions to aid future use
for generation of the entries and subsequent decoding.
The names for the various fields are meant to reflect the names used by the
Visual Studio toolchain to aid communication.
Due to the complexity in reading a few of the values, there are a couple of
additional utility functions to decode the information.
In general, there are two ways to encode the unwinding information:
- packed, which places the data inline into the
_IMAGE_ARM_RUNTIME_FUNCTION_ENTRY structure.
- unpacked, which places the data into auxiliary structures placed into the
.xdata section.
The set of structures allow reading of data in either encoding, with the minor
caveat that epilogue scopes need to be decoded manually by constructing the
structure from the data returned by the RuntimeFunction structure.
These definitions are meant for read-only access at the current point as the
first use of them will be to decode the exception information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209998 91177308-0d34-0410-b5e6-96231b3b80d8
Input YAML file might contain multiple object file definitions.
New option `-docnum` allows to specify an ordinal number (starting from 1)
of definition used for an object file generation.
Patch reviewed by Sean Silva.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209967 91177308-0d34-0410-b5e6-96231b3b80d8
There is no std::error_code::success, so this removes much of the noise
in transitioning to std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209952 91177308-0d34-0410-b5e6-96231b3b80d8
Fix error handling introduced in r127426 that could result in MemoryBuffers not
having null termination.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208396 91177308-0d34-0410-b5e6-96231b3b80d8
On x64, windows.h doesn't include intrin.h for intrinsics. It just
declares them in the global namespace and uses them, expecting the
compiler to lower it as a builtin. We basically need to do this in
clang, eventually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@208023 91177308-0d34-0410-b5e6-96231b3b80d8
Tested that the right -target-cpu is set in the clang -cc1 command line
when running "clang -march=native -E -v - </dev/null" on both an FX-8150
and an FX-8350. Both are family 15h; the FX-8150 (Bulldozer processor)
reports a model number of 1, and the FX-8350 (Piledriver processor)
reports a model number of 2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207973 91177308-0d34-0410-b5e6-96231b3b80d8
Change `BlockFrequency` to defer to `BranchProbability::scale()` and
`BranchProbability::scaleByInverse()`.
This removes `BlockFrequency::scale()` from its API (and drops the
ability to see the remainder), but the only user was the unit tests. If
some code in the future needs an API that exposes the remainder, we can
add something to `BranchProbability`, but I find that unlikely.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207550 91177308-0d34-0410-b5e6-96231b3b80d8
Add API to `BranchProbability` for scaling big integers. Next job is to
rip the logic out of `BlockMass` and `BlockFrequency`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207544 91177308-0d34-0410-b5e6-96231b3b80d8
each line. This is particularly nice for tracking which run of
a particular pass over a particular function was slow.
This also required making the TimeValue string much more useful. First,
there is a standard format for writing out a date and time. Let's use
that rather than strings that would have to be parsed. Second, actually
output the nanosecond resolution that timevalue claims to have.
This is proving useful working on PR19499, so I figured it would be
generally useful to commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207385 91177308-0d34-0410-b5e6-96231b3b80d8
behavior based on other files defining DEBUG_TYPE, which means it cannot
define DEBUG_TYPE at all. This is actually better IMO as it forces folks
to define relevant DEBUG_TYPEs for their files. However, it requires all
files that currently use DEBUG(...) to define a DEBUG_TYPE if they don't
already. I've updated all such files in LLVM and will do the same for
other upstream projects.
This still leaves one important change in how LLVM uses the DEBUG_TYPE
macro going forward: we need to only define the macro *after* header
files have been #include-ed. Previously, this wasn't possible because
Debug.h required the macro to be pre-defined. This commit removes that.
By defining DEBUG_TYPE after the includes two things are fixed:
- Header files that need to provide a DEBUG_TYPE for some inline code
can do so by defining the macro before their inline code and undef-ing
it afterward so the macro does not escape.
- We no longer have rampant ODR violations due to including headers with
different DEBUG_TYPE definitions. This may be mostly an academic
violation today, but with modules these types of violations are easy
to check for and potentially very relevant.
Where necessary to suppor headers with DEBUG_TYPE, I have moved the
definitions below the includes in this commit. I plan to move the rest
of the DEBUG_TYPE macros in LLVM in subsequent commits; this one is big
enough.
The comments in Debug.h, which were hilariously out of date already,
have been updated to reflect the recommended practice going forward.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206822 91177308-0d34-0410-b5e6-96231b3b80d8
declaration. GCC 4.7 appears to get hopelessly confused by declaring
this function within a member function of a class template. Go figure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206152 91177308-0d34-0410-b5e6-96231b3b80d8
abstract interface. The only user of this functionality is the JIT
memory manager and it is quite happy to have a custom type here. This
removes a virtual function call and a lot of unnecessary abstraction
from the common case where this is just a *very* thin vaneer around
a call to malloc.
Hopefully still no functionality changed here. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206149 91177308-0d34-0410-b5e6-96231b3b80d8
slabs rather than embedding a singly linked list in the slabs
themselves. This has a few advantages:
- Better utilization of the slab's memory by not wasting 16-bytes at the
front.
- Simpler allocation strategy by not having a struct packed at the
front.
- Avoids paging every allocated slab in just to traverse them for
deallocating or dumping stats.
The latter is the really nice part. Folks have complained from time to
time bitterly that tearing down a BumpPtrAllocator, even if it doesn't
run any destructors, pages in all of the memory allocated. Now it won't.
=]
Also resolves a FIXME with the scaling of the slab sizes. The scaling
now disregards specially sized slabs for allocations larger than the
threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206147 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce ScalarTraits::mustQuote which determines whether or not a
StringRef needs quoting before it is acceptable to output.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205955 91177308-0d34-0410-b5e6-96231b3b80d8
Don't quote octal compatible strings if they are only two wide, they
aren't ambiguous.
This reverts commit r205857 which reverted r205857.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205914 91177308-0d34-0410-b5e6-96231b3b80d8
YAMLIO would turn a BinaryRef into the string 0000000004000000.
However, the leading zero causes parsers to interpret it as being an
octal number instead of a hexadecimal one.
Instead, escape such strings as needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205839 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids an extra copy during decompression and avoids the use of
MemoryBuffer which is a weirdly esoteric device that includes unrelated
concepts like "file name" (its rather generic name is a bit misleading).
Similar refactoring of zlib::compress coming up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205676 91177308-0d34-0410-b5e6-96231b3b80d8
This generalises the object file type parsing to all Windows environments. This
is used by cygwin as well as MSVC environments for MCJIT. This also makes the
triple more similar to Chandler's suggestion of a separate field for the object
file format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205219 91177308-0d34-0410-b5e6-96231b3b80d8
parameters rather than runtime parameters.
There is only one user of these parameters and they are compile time for
that user. Making these compile time seems to better reflect their
intended usage as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205143 91177308-0d34-0410-b5e6-96231b3b80d8
That causes references to them to be weak references which can collapse
to null if no definition is provided. We call these functions
unconditionally, so a definition *must* be provided. Make the
definitions provided in the .cpp file weak by re-declaring them as weak
just prior to defining them. This should keep compilers which cannot
attach the weak attribute to the definition happy while actually
resolving the symbols correctly during the link.
You might ask yourself upon reading this commit log: how did *any* of
this work before? Well, fun story. It turns out we have some code in
Support (BumpPtrAllocator) which both uses virtual dispatch and has
out-of-line vtables used by that virtual dispatch. If you move the
virtual dispatch into its header in *just* the right way, the optimizer
gets to devirtualize, and remove all references to the vtable. Then the
sad part: the references to this one vtable were the only strong symbol
uses in the support library for llvm-tblgen AFAICT. At least, after
doing something just like this, these symbols stopped getting their weak
definition and random calls to them would segfault instead.
Yay software.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205137 91177308-0d34-0410-b5e6-96231b3b80d8
This is causing the ARM build-bots to fail since they only include
the ARM backend and can't create an ARM64 target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205132 91177308-0d34-0410-b5e6-96231b3b80d8
If the environment is unknown and no object file is provided, then assume an
"MSVC" environment, otherwise, set the environment to the object file format.
In the case that we have a known environment but a non-native file format for
Windows (COFF) which is used for MCJIT, then append the custom file format to
the triple as an additional component.
This fixes the MCJIT tests on Windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205130 91177308-0d34-0410-b5e6-96231b3b80d8
This will fix cross-compiling buildbots (e.g. cygwin). This is in the same vein
as SVN r205070. Apply this to fix the cross-compiling scenario, even though the
preferred solution is to update the build system to normalize the embedded
triple rather than perform this at runtime every time. This is meant to tide us
over until that approach is fleshed out and applied.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205120 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a second implementation of the AArch64 architecture to LLVM,
accessible in parallel via the "arm64" triple. The plan over the
coming weeks & months is to merge the two into a single backend,
during which time thorough code review should naturally occur.
Everything will be easier with the target in-tree though, hence this
commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@205090 91177308-0d34-0410-b5e6-96231b3b80d8
BumpPtrAllocator significantly less strange by making it a simple
function of the number of slabs allocated rather than by making it
a recurrance. I *think* the previous behavior was essentially that the
size of the slabs would be doubled after the first 128 were allocated,
and then doubled again each time 64 more were allocated, but only if
every allocation packed perfectly into the slab size. If not, the wasted
space wouldn't be counted toward increasing the size, but allocations
over the size threshold *would*. And since the allocations over the size
threshold might be much larger than the slab size, this could have
somewhat surprising consequences where we rapidly grow the slab size.
This currently requires adding state to the allocator to track the
number of slabs currently allocated, but that isn't too bad. I'm
planning further changes to the allocator that will make this state fall
out even more naturally.
It still doesn't fully decouple the growth rate from the allocations
which are over the size threshold. That fix is coming later.
This specific fix will allow making the entire thing into a more
stateless device and lifting the parameters into template parameters
rather than runtime parameters.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204993 91177308-0d34-0410-b5e6-96231b3b80d8
Construct a uniform Windows target triple nomenclature which is congruent to the
Linux counterpart. The old triples are normalised to the new canonical form.
This cleans up the long-standing issue of odd naming for various Windows
environments.
There are four different environments on Windows:
MSVC: The MS ABI, MSVCRT environment as defined by Microsoft
GNU: The MinGW32/MinGW32-W64 environment which uses MSVCRT and auxiliary libraries
Itanium: The MSVCRT environment + libc++ built with Itanium ABI
Cygnus: The Cygwin environment which uses custom libraries for everything
The following spellings are now written as:
i686-pc-win32 => i686-pc-windows-msvc
i686-pc-mingw32 => i686-pc-windows-gnu
i686-pc-cygwin => i686-pc-windows-cygnus
This should be sufficiently flexible to allow us to target other windows
environments in the future as necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204977 91177308-0d34-0410-b5e6-96231b3b80d8
Add the Windows COFF ARM object file magic. This enables the LLVM tools to
interact with COFF object files for Windows on ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203761 91177308-0d34-0410-b5e6-96231b3b80d8
Add a utility function to convert the Windows path separator to Unix style path
separators. This is used by a subsequent change in clang to enable the use of
Windows SDK headers on Linux.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203611 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch the unix code for creating hardlinks was unused. The code
for creating symbolic links was implemented in lib/Support/LockFileManager.cpp
and the code for creating hard links in lib/Support/*/Path.inc.
The only use we have for these is in LockFileManager.cpp and it can use both
soft and hard links. Just have a create_link function that creates one or the
other depending on the platform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203596 91177308-0d34-0410-b5e6-96231b3b80d8
This is a preliminary setup change to support a renaming of Windows target
triples. Split the object file format information out of the environment into a
separate entity. Unfortunately, file format was previously treated as an
environment with an unknown OS. This is most obvious in the ARM subtarget where
the handling for macho on an arbitrary platform switches to AAPCS rather than
APCS (as per Apple's needs).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203160 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commits r203136, r203137, and r203138.
This code doesn't build on Windows. Even on Vista+, Windows requires
elevated privileges to create a symlink. Therefore we can't use
symlinks in the compiler. We'll have to find another approach.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203143 91177308-0d34-0410-b5e6-96231b3b80d8
There was a race where:
- The LockFileManager tries to own the lock file and fails.
- The other owner then releases and removes the lock file.
- The LockFileManager tries to read the owner info from the lock file but fails now.
In such a case have LockFileManager try to get ownership again, instead of error'ing out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203138 91177308-0d34-0410-b5e6-96231b3b80d8
Hard links do not work on SMB network directories, and it causes us to fail
to build clang module files if the module cache is in such a directory.
rdar://15944959
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203137 91177308-0d34-0410-b5e6-96231b3b80d8
This compiles with no changes to clang/lld/lldb with MSVC and includes
overloads to various functions which are used by those projects and llvm
which have OwningPtr's as parameters. This should allow out of tree
projects some time to move. There are also no changes to libs/Target,
which should help out of tree targets have time to move, if necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203083 91177308-0d34-0410-b5e6-96231b3b80d8
When using a //net/ path, we were transforming the trailing / into a '.'
when the path was just the root path and we were iterating backwards.
Forwards iteration and other kinds of root path (C:\, /) were already
correct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202999 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow external callers of these functions to switch over time
rather than forcing a breaking change all a once. These particular
functions were determined by building clang/lld/lldb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202959 91177308-0d34-0410-b5e6-96231b3b80d8
a bit surprising, as the class is almost entirely abstracted away from
any particular IR, however it encodes the comparsion predicates which
mutate ranges as ICmp predicate codes. This is reasonable as they're
used for both instructions and constants. Thus, it belongs in the IR
library with instructions and constants.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202838 91177308-0d34-0410-b5e6-96231b3b80d8
Breaks the MSVC build.
DataStream.cpp(44): error C2552: 'llvm::Statistic::Value' : non-aggregates cannot be initialized with initializer list
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202731 91177308-0d34-0410-b5e6-96231b3b80d8
With C++11 we finally have a standardized way to specify atomic operations. Use
them to replace the existing custom implemention. Sadly the translation is not
entirely trivial as std::atomic allows more fine-grained control over the
atomicity. I tried to preserve the old semantics as well as possible.
Differential Revision: http://llvm-reviews.chandlerc.com/D2915
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202730 91177308-0d34-0410-b5e6-96231b3b80d8
lib/Support/RWMutex.cpp contains an implementation of RWMutex that
uses pthread_rwlock, but when pthread_rwlock is not available (such as
under NaCl, when using newlib), it silently falls back to using the
no-op definition in lib/Support/Unix/RWMutex.inc, which is not
thread-safe.
Fix this case to be thread-safe by using a normal mutex.
Differential Revision: http://llvm-reviews.chandlerc.com/D2892
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202570 91177308-0d34-0410-b5e6-96231b3b80d8
Tools that use the CommandLine library currently exit with an error
when invoked with -version or -help. This is unusual and non-standard,
so we'll fix them to exit successfully instead.
I don't expect that anyone relies on the current behaviour, so this
should be a fairly safe change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202530 91177308-0d34-0410-b5e6-96231b3b80d8
target_link_libraries(INTERFACE) doesn't bring inter-target dependencies in add_library,
although final targets have dependencies to whole dependent libraries.
It makes most libraries can be built in parallel.
target_link_libraries(PRIVATE) is used to shaared library.
Each dependent library is linked to the target.so, and its user will not see its grandchildren.
For example,
- libclang.so has sufficient libclang*.a(s).
- c-index-test requires just only libclang.so.
FIXME: lld is tweaked minimally. Adding INTERFACE in each library would be better thing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202241 91177308-0d34-0410-b5e6-96231b3b80d8
After this I will set the default back to F_None. The advantage is that
before this patch forgetting to set F_Binary would corrupt a file on windows.
Forgetting to set F_Text produces one that cannot be read in notepad, which
is a better failure mode :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202052 91177308-0d34-0410-b5e6-96231b3b80d8
The only extra bit of functionality that had to be exposed for this be be
implemented in Path.cpp is opening a file in rw mode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202005 91177308-0d34-0410-b5e6-96231b3b80d8
Before this patch they would take an boolean argument to say if the path
already existed. This was redundant with the returned error_code which is able
to represent that. This allowed for callers to incorrectly check only the
existed flag instead of first checking the error code.
Instead, pass in a boolean flag to say if the previous (non-)existence should be
an error or not.
Callers of the of the old simple versions are not affected. They still ignore
the previous (non-)existence as they did before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201979 91177308-0d34-0410-b5e6-96231b3b80d8
The LLVMSupport library implementation consolidates all dependencies on
system libraries. Move the logic gathering system libraries out of
'cmake/modules/LLVM-Config.cmake' and into 'lib/Support/CMakeLists.txt'.
Use the target_link_libraries() command there to tell CMake about the
link dependencies of the LLVMSupport implementation. CMake will
automatically propagate this to all targets that link LLVMSupport
directly or indirectly.
We still need to build knowledge of system library dependencies into
'llvm-config'. Store the list of libraries needed in a property on
LLVMSupport and teach 'tools/llvm-config/CMakeLists.txt' to retrieve it
from there.
Drop all calls to 'link_system_libs' and 'get_system_libs' from our
CMake code. Replace their implementations with a warning that explains
the calls are no longer necessary. Also drop from 'LLVMConfig.cmake'
the HAVE_* and related variables that were published there only to allow
'get_system_libs' to run outside our build process.
Contributed by Brad King.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201969 91177308-0d34-0410-b5e6-96231b3b80d8
This is an optimistic version of create_diretories: it tries to create the
directory first and looks at the parent only if that fails.
Running strace on "mkdir -p" shows that it is pessimistic, calling mkdir on
every element of the path. We could implement that if needed.
In any case, with both strategies there is no reason to call stat, just check
the return of mkdir.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201347 91177308-0d34-0410-b5e6-96231b3b80d8
I found that swapping the order of some header files helped fix a
build issue that we're seeing on mingw32. Without the swap, windows.h
was being included before _WIN32_WINNT was being defined and the
CreateHardLinkW function was #ifdef'd out.
It looks like the header is mainly used to get the SHGetFolderPathW
function, so I don't think that there'll be much fallout from the
switch.
Suggested by Alex Crichton. Thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201230 91177308-0d34-0410-b5e6-96231b3b80d8
An intermediate solution until the problems with analyzer plugins linking with
llvm/Support and causing assertions due to duplicate GeneralCategory are solved.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200981 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The check performed in the comparator is invalid, as some STL
implementations enforce strict weak ordering by calling the comparator with the
same value. This check was also in a wrong place: the assertion would only fire
when -help was used. The new check is performed each time the category is
registered (we are not going to have thousands of them, so it's fine to do it in
O(N^2)).
Reviewers: jordan_rose
Reviewed By: jordan_rose
CC: cfe-commits, alexmc
Differential Revision: http://llvm-reviews.chandlerc.com/D2699
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200853 91177308-0d34-0410-b5e6-96231b3b80d8
ISSUE:
On Ubuntu 12.04 LTS, arc4random is provided by libbsd.so, which is a
transitive dependency of libedit. If a system had libedit on it that
was implemented in terms of libbsd.so, then the arc4random test,
previously implemented as a linker test, would succeed with -ledit.
However, on Ubuntu this would also require a #include <bsd/stdlib.h>.
This caused a build breakage on configure-based Ubuntu 12.04 with
libedit installed.
FIX:
This fix changes configure to test for arc4random by searching for it
in the standard header files. On Ubuntu 12.04, this test now properly
fails to find arc4random as it is not defined in the default header
locations. It also tweaks the #define names to match the output of the
header check command, which is slightly different than the linker
function check #defines.
I tested the following scenarios:
(1) Ubuntu 12.04 without the libedit package [did not find arc4random,
as expected]
(2) Ubuntu 12.04 with libedit package [properly did not find
arc4random, as expected]
(3) Ubuntu 12.04 with most recent libedit, custom built, and not
dependent on libbsd.so [properly did not find arc4random, as
expected].
(4) FreeBSD 10.0B1 [properly found arc4random, as expected]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200819 91177308-0d34-0410-b5e6-96231b3b80d8
'SmallPtrSetImplBase'. This more closely matches the organization of
SmallVector and should allow introducing a SmallPtrSetImpl which serves
the same purpose as SmallVectorImpl: isolating the element type from the
particular small size chosen. This in turn allows a lot of
simplification of APIs by not coding them against a specific small size
which is rarely needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200687 91177308-0d34-0410-b5e6-96231b3b80d8
This can still be overridden by explicitly setting a value requirement on the
alias option, but by default it should be the same.
PR18649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200407 91177308-0d34-0410-b5e6-96231b3b80d8
There are a couple of interesting things here that we want to check over
(particularly the expecting asserts in StringRef) and get right for general use
in ADT so hold back on this one. For clang we have a workable templated
solution to use in the meanwhile.
This reverts commit r200187.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200194 91177308-0d34-0410-b5e6-96231b3b80d8
(1) Add llvm_expect(), an asserting macro that can be evaluated as a constexpr
expression as well as a runtime assert or compiler hint in release builds. This
technique can be used to construct functions that are both unevaluated and
compiled depending on usage.
(2) Update StringRef using llvm_expect() to preserve runtime assertions while
extending the same checks to static asserts in C++11 builds that support the
feature.
(3) Introduce ConstStringRef, a strong subclass of StringRef that references
compile-time constant strings. It's convertible to, but not from, ordinary
StringRef and thus can be used to add compile-time safety to various interfaces
in LLVM and clang that only accept fixed inputs such as diagnostic format
strings that tend to get misused.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200187 91177308-0d34-0410-b5e6-96231b3b80d8
Sweep the codebase for common typos. Includes some changes to visible function
names that were misspelt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200018 91177308-0d34-0410-b5e6-96231b3b80d8
ADDITIONAL_HEADERS is intended to add header files for IDEs as hint.
For example:
add_llvm_library(LLVMSupport
Host.cpp
ADDITIONAL_HEADERS
Unix/Host.inc
Windows/Host.inc
)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199639 91177308-0d34-0410-b5e6-96231b3b80d8
This moves the ARM build attributes definitions and support routines into the
Support library. The support routines simply permit the conversion of the value
to and from a string representation.
The movement is prompted in order to permit access to the constants and string
representations from readobj in order to facilitate decoding of the attributes
section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199575 91177308-0d34-0410-b5e6-96231b3b80d8
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198685 91177308-0d34-0410-b5e6-96231b3b80d8
lib/Support/ThreadLocal.cpp:53:15: error: typedef 'SIZE_TOO_BIG' locally defined but not used [-Werror=unused-local-typedefs]
typedef int SIZE_TOO_BIG[sizeof(pthread_key_t) <= sizeof(data) ? 1 : -1];
Done the C++11 way, switching on and using LLVM_STATIC_ASSERT() instead of LLVM_ATTRIBUTE_UNUSED.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198255 91177308-0d34-0410-b5e6-96231b3b80d8
much more clear to me. I meant to make this change before committing the
original patch, but forgot to merge it in. Sorry.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198069 91177308-0d34-0410-b5e6-96231b3b80d8
This is an iterator which you can build around a MemoryBuffer. It will
iterate through the non-empty, non-comment lines of the buffer as
a forward iterator. It should be small and reasonably fast (although it
could be made much faster if anyone cares, I don't really...).
This will be used to more simply support the text-based sample
profile file format, and is largely based on the original patch by
Diego. I've re-worked the style of it and separated it from the work of
producing a MemoryBuffer from a file which both simplifies the interface
and makes it easier to test.
The style of the API follows the C++ standard naming conventions to fit
in better with iterators in general, much like the Path and FileSystem
interfaces follow standard-based naming conventions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198068 91177308-0d34-0410-b5e6-96231b3b80d8
Recently, support for krait cpu was added. This commit extends getHostCPUName()
to return krait as cpu for the APQ8064 (a Krait 300).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197792 91177308-0d34-0410-b5e6-96231b3b80d8
According to the docs, ThreadLocal<>::get() should return NULL
if no object has been set. This patch makes that the case also for non-thread
builds and adds a very basic unit test to check it.
(This was causing PR18205 because PrettyStackTraceHead didn't get zero-
initialized and we'd crash trying to read past the end of that list. We didn't
notice this so much on Linux since we'd crash after printing all the entries,
but on Mac we print into a SmallString, and would crash before printing that.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197718 91177308-0d34-0410-b5e6-96231b3b80d8
DiagnosticPrinter.cpp.
These was creating a link time dependencies of IR on CodeGen and Analysis.
Part of <rdar://problem/15515174>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197447 91177308-0d34-0410-b5e6-96231b3b80d8
The patch adds a new LLVMContext::diagnose that can be used to communicate to
the front-end, if any, that something of interest happened.
The diagnostics are supported by a new abstraction, the DiagnosticInfo class.
The base class contains the following information:
- The kind of the report: What this is about.
- The severity of the report: How bad this is.
This patch also adds 2 classes:
- DiagnosticInfoInlineAsm: For inline asm reporting. Basically, this diagnostic
will be used to switch to the new diagnostic API for LLVMContext::emitError.
- DiagnosticStackSize: For stack size reporting. Comes as a replacement of the
hard coded warning in PEI.
This patch also features dynamic diagnostic identifiers. In other words plugins
can use this infrastructure for their own diagnostics (for more details, see
getNextAvailablePluginDiagnosticKind).
This patch introduces a new DiagnosticHandlerTy and a new DiagnosticContext in
the LLVMContext that should be set by the front-end to be able to map these
diagnostics in its own system.
http://llvm-reviews.chandlerc.com/D2376
<rdar://problem/15515174>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197438 91177308-0d34-0410-b5e6-96231b3b80d8
This was manifesting as an LLVM_ASSUME_ALIGNED() failure in an ELF debug
info test when building LLVM with clang in the Microsoft C++ ABI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197401 91177308-0d34-0410-b5e6-96231b3b80d8
The cpp backend is not a reasonable fallback for a missing target. It is a
very special backend, so it is reasonable to use it only if explicitly
requested.
While at it, simplify the interface a bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197241 91177308-0d34-0410-b5e6-96231b3b80d8
The old AddFixedStringToRegEx() it was based on got away with this for the
longest time, but the problem became easy to spot after the cleanup in r197096.
Also add a quick unit test to cover regex escaping.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197121 91177308-0d34-0410-b5e6-96231b3b80d8
Both FileCheck and clang's -verify need to escape strings for regexes,
so let's expose this as a utility in the Regex class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197096 91177308-0d34-0410-b5e6-96231b3b80d8
Defaulting to iOS 3.0 when LLVM has to guess the version is no longer a useful
option and can give surprising results (like tail calls being disabled).
5.0 seems like a reasonable compromise as a platform that's still interesting
to some people.
rdar://problem/15567348
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196912 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When clang is used under GNU/Linux in a chroot without /proc mount, it falls
back on the BSD method. However, since the buf variable is used twice
and fails with snprintf to produce the correct path.
When called as relatived (ie ./clang), it was failing with:
"" -cc1 [...] -x c++ x.cc
error: unable to execute command: Executable "" doesn't exist!
I also took the opportunity to simply the code (the first arg of test_dir
was useless).
Reviewers: rafael
Reviewed By: rafael
CC: cfe-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2361
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196791 91177308-0d34-0410-b5e6-96231b3b80d8
Command line arguments that begin with @ but aren't a path to an
existing file currently cause later @file arguments to be ignored.
Correctly skip over these arguments instead of trying to read a
non-existent file 20 times and giving up.
Since the problem manifests in the clang driver, the test is in that
repository.
Fixes rdar://problem/15590906
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196620 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tries to avoid unrelated changes other than fixing a few
hyphen-related ambiguities and contractions in nearby lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196471 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a logic bug pointed out by Juraj Ivancic.
No behavior change because none of the in-tree clients of
cl::ExpandResponseFiles check the return value. In this case, the
@prefixed arguments are left in the command line. Downstream command
line processing has the opportunity to emit errors about it, so this
isn't that bad.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196306 91177308-0d34-0410-b5e6-96231b3b80d8
implementation. Silliness, but it'll be a trivial performance
optimization. This should clear up a failure on the vg_leak bot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195704 91177308-0d34-0410-b5e6-96231b3b80d8
Enhance the tests to actually require moves in C++11 mode, in addition
to testing the moved-from state. Further enhance the tests to cover
copy-assignment into a moved-from object and moving a large-state
object. (Note that we can't really test small-state vs. large-state as
that isn't an observable property of the API really.) This should finish
addressing review on r195239.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195261 91177308-0d34-0410-b5e6-96231b3b80d8
Somehow, this ADT got missed which is moderately terrifying considering
the efficiency of move for it.
The code to implement move semantics for it is pretty horrible
currently but was written to reasonably closely match the rest of the
code. Unittests that cover both copying and moving (at a basic level)
added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195239 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes most of the trivial cases of weak vtables by pinning them to
a single object file. The memory leaks in this version have been fixed. Thanks
Alexey for pointing them out.
Differential Revision: http://llvm-reviews.chandlerc.com/D2068
Reviewed by Andy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195064 91177308-0d34-0410-b5e6-96231b3b80d8
This change is incorrect. If you delete virtual destructor of both a base class
and a subclass, then the following code:
Base *foo = new Child();
delete foo;
will not cause the destructor for members of Child class. As a result, I observe
plently of memory leaks. Notable examples I investigated are:
ObjectBuffer and ObjectBufferStream, AttributeImpl and StringSAttributeImpl.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194997 91177308-0d34-0410-b5e6-96231b3b80d8
This change is the first in a series of changes improving LLVM's Block
Frequency propogation implementation to not lose probability mass in
branchy code when propogating block frequency information from a basic
block to its successors. This patch is a simple infrastructure
improvement that does not actually modify the block frequency
algorithm. The specific changes are:
1. Changes the division algorithm used when scaling block frequencies by
branch probabilities to a short division algorithm. This gives us the
remainder for free as well as provides a nice speed boost. When I
benched the old routine and the new routine on a Sandy Bridge iMac with
disabled turbo mode performing 8192 iterations on an array of length
32768, I saw ~600% increase in speed in mean/median performance.
2. Exposes a scale method that returns a remainder. This is important so
we can ensure that when we scale a block frequency by some branch
probability BP = N/D, the remainder from the division by D can be
retrieved and propagated to other children to ensure no probability mass
is lost (more to come on this).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194950 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Some machine-type-neutral object files containing only undefined symbols
actually do exist in the Windows standard library. Need to recognize them
as COFF files.
Reviewers: Bigcheese
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2164
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194734 91177308-0d34-0410-b5e6-96231b3b80d8
stack traces by default if you use PrettyStackTraceProgram, so that existing LLVM-based
tools will continue to get it without any changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193971 91177308-0d34-0410-b5e6-96231b3b80d8
As on other hosts, the CPU identification instruction is priveleged,
so we need to look through /proc/cpuinfo. I copied the PowerPC way of
handling "generic".
Several tests were implicitly assuming z10 and so failed on z196.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@193742 91177308-0d34-0410-b5e6-96231b3b80d8
