I enhanced it a little in the process. The decision shouldn't really be beased
on whether a BUILD_VECTOR is a splat: any set of constants will do the job
provided they're related in the correct way.
Also, the BUILD_VECTOR could be any operand of the incoming AND nodes, so it's
best to check for all 4 possibilities rather than assuming it'll be the RHS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206569 91177308-0d34-0410-b5e6-96231b3b80d8
It's not actually used to handle C or C++ ABI rules on ARM64, but could well be
emitted by other language front-ends, so it's as well to have a sensible
implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206568 91177308-0d34-0410-b5e6-96231b3b80d8
Use scalar BFE with constant shift and offset when possible.
This is complicated by the fact that the scalar version packs
the two operands of the vector version into one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206558 91177308-0d34-0410-b5e6-96231b3b80d8
Rewrite the shared implementation of BlockFrequencyInfo and
MachineBlockFrequencyInfo entirely.
The old implementation had a fundamental flaw: precision losses from
nested loops (or very wide branches) compounded past loop exits (and
convergence points).
The @nested_loops testcase at the end of
test/Analysis/BlockFrequencyAnalysis/basic.ll is motivating. This
function has three nested loops, with branch weights in the loop headers
of 1:4000 (exit:continue). The old analysis gives non-sensical results:
Printing analysis 'Block Frequency Analysis' for function 'nested_loops':
---- Block Freqs ----
entry = 1.0
for.cond1.preheader = 1.00103
for.cond4.preheader = 5.5222
for.body6 = 18095.19995
for.inc8 = 4.52264
for.inc11 = 0.00109
for.end13 = 0.0
The new analysis gives correct results:
Printing analysis 'Block Frequency Analysis' for function 'nested_loops':
block-frequency-info: nested_loops
- entry: float = 1.0, int = 8
- for.cond1.preheader: float = 4001.0, int = 32007
- for.cond4.preheader: float = 16008001.0, int = 128064007
- for.body6: float = 64048012001.0, int = 512384096007
- for.inc8: float = 16008001.0, int = 128064007
- for.inc11: float = 4001.0, int = 32007
- for.end13: float = 1.0, int = 8
Most importantly, the frequency leaving each loop matches the frequency
entering it.
The new algorithm leverages BlockMass and PositiveFloat to maintain
precision, separates "probability mass distribution" from "loop
scaling", and uses dithering to eliminate probability mass loss. I have
unit tests for these types out of tree, but it was decided in the review
to make the classes private to BlockFrequencyInfoImpl, and try to shrink
them (or remove them entirely) in follow-up commits.
The new algorithm should generally have a complexity advantage over the
old. The previous algorithm was quadratic in the worst case. The new
algorithm is still worst-case quadratic in the presence of irreducible
control flow, but it's linear without it.
The key difference between the old algorithm and the new is that control
flow within a loop is evaluated separately from control flow outside,
limiting propagation of precision problems and allowing loop scale to be
calculated independently of mass distribution. Loops are visited
bottom-up, their loop scales are calculated, and they are replaced by
pseudo-nodes. Mass is then distributed through the function, which is
now a DAG. Finally, loops are revisited top-down to multiply through
the loop scales and the masses distributed to pseudo nodes.
There are some remaining flaws.
- Irreducible control flow isn't modelled correctly. LoopInfo and
MachineLoopInfo ignore irreducible edges, so this algorithm will
fail to scale accordingly. There's a note in the class
documentation about how to get closer. See also the comments in
test/Analysis/BlockFrequencyInfo/irreducible.ll.
- Loop scale is limited to 4096 per loop (2^12) to avoid exhausting
the 64-bit integer precision used downstream.
- The "bias" calculation proposed on llvmdev is *not* incorporated
here. This will be added in a follow-up commit, once comments from
this review have been handled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206548 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This prevents the discriminator generation pass from triggering if
the DWARF version being used in the module is prior to 4.
Reviewers: echristo, dblaikie
CC: llvm-commits
Differential Revision: http://reviews.llvm.org/D3413
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206507 91177308-0d34-0410-b5e6-96231b3b80d8
Change the command line vector-insertion.ll to explicitly set the neon syntax
to apple so that buildbots that default to other syntaxes won't fail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206502 91177308-0d34-0410-b5e6-96231b3b80d8
Having i128 as a legal type complicates the legalization phase. v4i32
is already a legal type, so we will use that instead.
This fixes several piglit tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206500 91177308-0d34-0410-b5e6-96231b3b80d8
This patch improves the performance of vector creation in caseiswhere where
several of the lanes in the vector are a constant floating point value. It
also includes new patterns to fold together some of the instructions when the
value is 0.0f. Test cases included.
rdar://16349427
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206496 91177308-0d34-0410-b5e6-96231b3b80d8
Update the SXT[BHW]/UXTW instruction aliases and the shifted reg addressing
mode handling.
PR19455 and rdar://16650642
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206495 91177308-0d34-0410-b5e6-96231b3b80d8
After some discussions the preferred semantics of
the always_inline attribute is
inline always when the compiler can determine
that it it safe to do so.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206487 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, SSPBufferSize was assigned the value of the "stack-protector-buffer-size"
attribute after all uses of SSPBufferSize. The effect was that the default
SSPBufferSize was always used during analysis. I moved the check for the
attribute before the analysis; now --param ssp-buffer-size= works correctly again.
Differential Revision: http://reviews.llvm.org/D3349
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206486 91177308-0d34-0410-b5e6-96231b3b80d8
Still only 32-bit ARM using it at this stage, but the promotion allows
direct testing via opt and is a reasonably self-contained patch on the
way to switching ARM64.
At this point, other targets should be able to make use of it without
too much difficulty if they want. (See ARM64 commit coming soon for an
example).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206485 91177308-0d34-0410-b5e6-96231b3b80d8
The commit of r205855:
Author: Arnold Schwaighofer <aschwaighofer@apple.com>
Date: Wed Apr 9 14:20:47 2014 +0000
SLPVectorizer: Only vectorize intrinsics whose operands are widened equally
The vectorizer only knows how to vectorize intrinics by widening all operands by
the same factor.
Patch by Tyler Nowicki!
exposed a backend bug causing a regression (Cannot select ctpop).
The commit msg is a bit confusing because the patch actually changes the
behavior for the loop-vectorizer as well. As things got refactored into a
helper ctpop got snuck in to the trivially-vectorizable helper which is now
used by both vectorizers. In other words, we started seeing vector-ctpops in
the backend.
This change makes ctpop LegalizeAction::Expand for the types not supported by
the byte-only CNT instruction. We may be able to custom-lower these later to
a single CNT but this is to fix the compiler crash first.
Fixes <rdar://problem/16578951>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206433 91177308-0d34-0410-b5e6-96231b3b80d8
is set even when it contains a indirect branch.
The attribute overrules correctness concerns
like the escape of a local block address.
This is for rdar://16501761
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206429 91177308-0d34-0410-b5e6-96231b3b80d8
This enables TableGen to generate an additional two operand
matcher for our shift_rotate_imm and shift_rotate_reg class of instructions.
The tests were also updated so that they include now encoding information
for all affected instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206398 91177308-0d34-0410-b5e6-96231b3b80d8
This is so that EF_MIPS_NAN2008 is set if we are using IEEE 754-2008
NaN encoding (-mnan=2008). This patch also adds support for parsing
'.nan legacy' and '.nan 2008' assembly directives. The handling of
these directives should match GAS' behaviour i.e., the last directive
in use sets the ELF header bit (EF_MIPS_NAN2008).
Differential Revision: http://reviews.llvm.org/D3346
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206396 91177308-0d34-0410-b5e6-96231b3b80d8
These ones used completely different sets of intrinsics, so the only way to do
it is create a separate ARM64 copy and change them all.
Other than that, CodeGen was straightforward, no deficiencies detected here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206392 91177308-0d34-0410-b5e6-96231b3b80d8
This should fix the ninja-x64-msvc-RA-centos6 builder.
I suspect the check in MipsSubtarget.cpp is incorrect and is really trying to
check for a bare-metal target rather and anything other than linux. I'll
investigate this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206385 91177308-0d34-0410-b5e6-96231b3b80d8
Now that Linux is trying to reparse all inline asm it chokes on the different
comment character in this test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206382 91177308-0d34-0410-b5e6-96231b3b80d8
The most important part here is that we should actuall emit the stubs we refer
to in the exception table, but as a side issue this uses more sensible & GCC
compatible representations for some of the bits of information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206380 91177308-0d34-0410-b5e6-96231b3b80d8
If we know that a particular 64-bit constant has all high bits zero, then we
can rely on the fact that 32-bit ARM64 instructions automatically zero out the
high bits of an x-register. This gives the expansion logic less constraints to
satisfy and so sometimes allows it to pick better sequences.
Came up while porting test/CodeGen/AArch64/movw-consts.ll: this will allow a
32-bit MOVN to be used in @test8 soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206379 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I had difficulty finding tests for the N32 and N64 ABI so I've added a
collection of calling convention tests based on the document MIPS ABIs
Described (MD00305), the MIPSpro N32 Handbook, and the SYSV ABI. Where the
documents/implementations disagree, I've used GCC to resolve the conflict.
A few interesting details:
* For N32, LLVM uses 64-bit pointers when saving $ra despite pointers being
32-bit. I've yet to find a supporting statement in the ABI documentation but
the current behaviour matches GCC.
* For O32, the non-variable portion of a varargs argument list is also subject
to the rule that floating-point is passed via GPR's (on N32/N64 only the
variable portion is subject to this rule). This agrees with GCC's behaviour
and the SYSV ABI but contradicts part of the MIPSpro N32 Handbook which talks about O32's behaviour.
* The N32 implementation has the wrong callee-saved register list.
(I already have a fix for this but will commit it as a follow-up).
I've left RUN-TODO lines in for O32 on MIPS64. I don't plan to support this case
for now but we should revisit it.
Reviewers: matheusalmeida, vmedic
Reviewed By: matheusalmeida
Differential Revision: http://reviews.llvm.org/D3339
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206370 91177308-0d34-0410-b5e6-96231b3b80d8
The second half of a split i128 was ending up in x7, which is not a good thing.
This is another part of PR19432.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206366 91177308-0d34-0410-b5e6-96231b3b80d8
This particular DAG combine is designed to kick in when both ConstantFPs will
end up being loaded via a litpool, however those nodes have a semi-legal
status, dictated by isFPImmLegal so in some cases there wouldn't have been a
litpool in the first place. Don't try to be clever in those circumstances.
Picked up while merging some AArch64 tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206365 91177308-0d34-0410-b5e6-96231b3b80d8
Adjust the tests to validate the number of auxiliary entries used to store the
filename.
Thanks to majnemer's sharp eye for catching the missing - 1 in the round up
calculation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206359 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for emitting .file records. This is mostly a quality of
implementation change (more complete support for COFF file emission) that was
noticed while working on COFF file emission for Windows on ARM.
A .file record is emitted as a symbol with storage class FILE (103) and the name
".file". A series of auxiliary format 4 records follow which contain the file
name. The filename is stored as an ANSI string and is padded with NULL if the
length is not a multiple of COFF::SymbolSize (18).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@206355 91177308-0d34-0410-b5e6-96231b3b80d8
