If the frame pointer is omitted, and any stack changes occur in the inline
assembly, e.g.: "pusha", then any C local variable or C argument references
will be incorrect.
I pass no judgement on anyone who would do such a thing. ;)
rdar://13218191
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175334 91177308-0d34-0410-b5e6-96231b3b80d8
If two functions require different features (e.g., `-mno-sse' vs. `-msse') then
we want to honor that, especially during LTO. We can do that by resetting the
subtarget's features depending upon the 'target-feature' attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175314 91177308-0d34-0410-b5e6-96231b3b80d8
For some basic blocks, it is possible to generate many candidate pairs for
relatively few pairable instructions. When many (tens of thousands) of these pairs
are generated for a single instruction group, the time taken to generate and
rank the different vectorization plans can become quite large. As a result, we now
cap the number of candidate pairs within each instruction group. This is done by
closing out the group once the threshold is reached (set now at 3000 pairs).
Although this will limit the overall compile-time impact, this may not be the best
way to achieve this result. It might be better, for example, to prune excessive
candidate pairs after the fact the prevent the generation of short, but highly-connected
groups. We can experiment with this in the future.
This change reduces the overall compile-time slowdown of the csa.ll test case in
PR15222 to ~5x. If 5x is still considered too large, a lower limit can be
used as the default.
This represents a functionality change, but only for very large inputs
(thus, there is no regression test).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175251 91177308-0d34-0410-b5e6-96231b3b80d8
validateSymbol() is called all over the place, and it seems it's a debug check.
It significantly speedups llvm-symbolizer used in tsan/asan/msan. validateSymbol() is the second hot function and accounts for 15% of runtime.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175192 91177308-0d34-0410-b5e6-96231b3b80d8
Also, allow _EMIT and __EMIT for the emit directive. We already do the same
for TYPE, SIZE, and LENGTH.
rdar://13200215
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175008 91177308-0d34-0410-b5e6-96231b3b80d8
Vectors were being manually scalarized by the backend. Instead,
let the target-independent code do all of the work. The manual
scalarization was from a time before good target-independent support
for scalarization in LLVM. However, this forces us to specially-handle
vector loads and stores, which we can turn into PTX instructions that
produce/consume multiple operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174968 91177308-0d34-0410-b5e6-96231b3b80d8
This emits the attribute groups that are used by the functions. (It currently
doesn't print out return type or parameter attributes within attribute groups.)
Note: The functions still retrieve their attributes from the "old" bitcode
format (using the deprecated 'Raw()' method). This means that string attributes
within an attribute group will not show up during a disassembly. This will be
addressed in a future commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174867 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts my commit 171047. Now that I've removed my misguided attempt to
support backend warnings, these diagnostics are only about inline assembly.
It would take quite a bit more work to generalize them properly, so I'm
just reverting this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174860 91177308-0d34-0410-b5e6-96231b3b80d8
function is successfully handled by fast-isel. That's because function
arguments are *always* handled by SDISel. Introduce FastLowerArguments to
allow each target to provide hook to handle formal argument lowering.
As a proof-of-concept, add ARMFastIsel::FastLowerArguments to handle
functions with 4 or fewer scalar integer (i8, i16, or i32) arguments. It
completely eliminates the need for SDISel for trivial functions.
rdar://13163905
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174855 91177308-0d34-0410-b5e6-96231b3b80d8
I have some uncommitted changes to the cast code that catch this sort of thing
at compile-time but I still need to do some other cleanup before I can enable
it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174853 91177308-0d34-0410-b5e6-96231b3b80d8
support for updating SlotIndexes to MachineBasicBlock::SplitCriticalEdge(). This
calls renumberIndexes() every time; it should be improved to only renumber
locally.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174851 91177308-0d34-0410-b5e6-96231b3b80d8
This is some initial code for emitting the attribute groups into the bitcode.
NOTE: This format *may* change! Do not rely upon the attribute groups' bitcode
not changing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174845 91177308-0d34-0410-b5e6-96231b3b80d8
bitcode writer would generate abbrev records saying that the abbrev should be
filled with fixed zero-bit bitfields (this happens in the .bc writer when
the number of types used in a module is exactly one, since log2(1) == 0).
In this case, just handle it as a literal zero. We can't "just fix" the writer
without breaking compatibility with existing bc files, so have the abbrev reader
do the substitution.
Strengthen the assert in read to reject reads of zero bits so we catch such
crimes in the future, and remove the special case designed to handle this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174801 91177308-0d34-0410-b5e6-96231b3b80d8
instead of always 32-bits at a time) with two changes:
1. Make Read(0) always return zero without affecting the state of our cursor.
2. Hack word_t to always be 32 bits, as staging.
These two caveats will change shortly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174800 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r171041. This was a nice idea that didn't work out well.
Clang warnings need to be associated with warning groups so that they can
be selectively disabled, promoted to errors, etc. This simplistic patch didn't
allow for that. Enhancing it to provide some way for the backend to specify
a front-end warning type seems like overkill for the few uses of this, at
least for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174748 91177308-0d34-0410-b5e6-96231b3b80d8
Aside from the question of whether we report a warning or an error when we
can't satisfy a requested stack object alignment, the current implementation
of this is not good. We're not providing any source location in the diagnostics
and the current warning is not connected to any warning group so you can't
control it. We could improve the source location somewhat, but we can do a
much better job if this check is implemented in the front-end, so let's do that
instead. <rdar://problem/13127907>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174741 91177308-0d34-0410-b5e6-96231b3b80d8
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174713 91177308-0d34-0410-b5e6-96231b3b80d8
PR15138 was opened because of a segfault in the Bitcode writer.
The actual issue ended up being a bug in APInt where calls to
APInt::getActiveWords returns a bogus value when the APInt value
is 0. This patch fixes the problem by ensuring that getActiveWords
returns 1 for 0 valued APInts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174641 91177308-0d34-0410-b5e6-96231b3b80d8
For example, ARM has several instructions with a literal '#0' immediate in the syntax
that's not represented as an actual operand. The asm matcher is expected a token
operand, but the parser will have created an immediate operand. This is currently
handled by dedicated per-instruction C++ munging of the ParsedAsmOperand list, but
will be better handled by this hook.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174487 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful when parsing an object that references multiple attribute groups.
N.B. If both builders have alignments specified, then they should match!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174480 91177308-0d34-0410-b5e6-96231b3b80d8
The stuff we're handing are all enums (Attribute::AttrKind), integers and
strings. Don't convert them to Constants, which is an unnecessary step here. The
rest of the changes are mostly mechanical.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174456 91177308-0d34-0410-b5e6-96231b3b80d8
We generate one line table for each compilation unit in the object file.
Reviewed by Eric and Kevin.
rdar://problem/13067005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174445 91177308-0d34-0410-b5e6-96231b3b80d8
All targets are now adding return value registers as implicit uses on
return instructions, and there is no longer a need for the live out
lists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174417 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, when a fragment is relaxed, its size is modified, but its
offset is not (it gets laid out as a side effect of checking whether
it needs relaxation), then all subsequent fragments are invalidated
because their offsets need to change. When bundling is enabled,
relaxed fragments need to get laid out again, because the increase in
size may push it over a bundle boundary. So instead of only
invalidating subsequent fragments, also invalidate the fragment that
gets relaxed, which causes it to get laid out again.
This patch also fixes some trailing whitespace and fixes the
bundling-related debug output of MCFragments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174401 91177308-0d34-0410-b5e6-96231b3b80d8
Some paths through the copy constructors for 'ErrorOr' were calling
'get' when 'HasError' and 'IsValid' were not properly initialized.
Depending on what happened to be in memory for those member variables
the asserts in 'get' might incorrectly fire. Fixed by ensuring that
the member variables in question are always initialized before calling
'get'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174381 91177308-0d34-0410-b5e6-96231b3b80d8
Rename the PARAMATTR_CODE_ENTRY to PARAMATTR_CODE_ENTRY_OLD. It will be replaced
by another encoding. Keep around the current LLVM attribute encoder/decoder
code, but move it to the bitcode directories so that no one's tempted to use
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174335 91177308-0d34-0410-b5e6-96231b3b80d8
This required disabling a PowerPC optimization that did the following:
input:
x = BUILD_VECTOR <i32 16, i32 16, i32 16, i32 16>
lowered to:
tmp = BUILD_VECTOR <i32 8, i32 8, i32 8, i32 8>
x = ADD tmp, tmp
The add now gets folded immediately and we're back at the BUILD_VECTOR we
started from. I don't see a way to fix this currently so I left it disabled
for now.
Fix some trivially foldable X86 tests too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174325 91177308-0d34-0410-b5e6-96231b3b80d8
This change lets us bootstrap LLVM/Clang under ASan and MSan. It contains
fixes for 2 issues:
- X86JIT reads return address from stack, which MSan does not know is
initialized.
- bugpoint tests run binaries with RLIMIT_AS. This does not work with certain
Sanitizers.
We are no longer including config.h in Compiler.h with this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174306 91177308-0d34-0410-b5e6-96231b3b80d8
I am going to add in the actual test cases with the actual functionality
changes in a later patch because I want to include some test cases.
To be clear when I say no *TRUE* functionality change I mean that this
patch (like it says in the title) only contains getters/setters and sets
up a default initial value of the instance variable to false so that
this patch does not affect any other uses of Global Variable.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174295 91177308-0d34-0410-b5e6-96231b3b80d8
Improve performance of iterating over children and accessing the member file
buffer by caching the file size and moving code out to the header.
This also makes getBuffer return a StringRef instead of a MemoryBuffer. Both
fixing a memory leak and removing a malloc.
This takes getBuffer from ~10% of the time in lld to unmeasurable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174272 91177308-0d34-0410-b5e6-96231b3b80d8
caught this, but I want that in a separate commit in case there is
a need to revert the actual functional bit as part of reverting other
patches. This way, the commits relating to just getting the RTTI bits in
place are separate from the functional changes that start using them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174117 91177308-0d34-0410-b5e6-96231b3b80d8
isa<> and dyn_cast<>. In several places, code is already hacking around
the absence of this, and there seem to be several interfaces that might
be lifted and/or devirtualized using this.
This change was based on a discussion with Jim Grosbach about how best
to handle testing for specific MCStreamer subclasses. He said that this
was the correct end state, and everything else was too hacky so
I decided to just make it so.
No functionality should be changed here, this is just threading the kind
through all the constructors and setting up the classof overloads.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174113 91177308-0d34-0410-b5e6-96231b3b80d8
The AttrBuilder is for building a collection of attributes. The Attribute object
holds only one attribute. So it's not really useful for the Attribute object to
have a creator which takes an AttrBuilder.
This has two fallouts:
1. The AttrBuilder no longer holds its internal attributes in a bit-mask form.
2. The attributes are now ordered alphabetically (hence why the tests have changed).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174110 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for AArch64 (ARM's 64-bit architecture) to
LLVM in the "experimental" category. Currently, it won't be built
unless requested explicitly.
This initial commit should have support for:
+ Assembly of all scalar (i.e. non-NEON, non-Crypto) instructions
(except the late addition CRC instructions).
+ CodeGen features required for C++03 and C99.
+ Compilation for the "small" memory model: code+static data <
4GB.
+ Absolute and position-independent code.
+ GNU-style (i.e. "__thread") TLS.
+ Debugging information.
The principal omission, currently, is performance tuning.
This patch excludes the NEON support also reviewed due to an outbreak of
batshit insanity in our legal department. That will be committed soon bringing
the changes to precisely what has been approved.
Further reviews would be gratefully received.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174054 91177308-0d34-0410-b5e6-96231b3b80d8
it isn't really an AliasAnalysis concept, and ValueTracking has similar things
that it could plausibly share code with some day.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174027 91177308-0d34-0410-b5e6-96231b3b80d8
The Attribute::hasAttributes() is kind of meaningless since an Attribute can
have only one attribute. And we would rather people use the 'operator=='
instead of Attribute::hasAttribute().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174026 91177308-0d34-0410-b5e6-96231b3b80d8
reference to a pointer, so that it can handle the case where DataLayout
is not available and behave conservatively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174024 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r174010 into '.':
U include/llvm/IR/Attributes.h
U lib/IR/Verifier.cpp
U lib/IR/Attributes.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174012 91177308-0d34-0410-b5e6-96231b3b80d8
The AttrBuilder is there to build up multiple attributes. The Attribute class
represents only one attribute at a time. So remove this unnecessary builder
creator method.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174010 91177308-0d34-0410-b5e6-96231b3b80d8
Several places were still treating the Attribute object as respresenting
multiple attributes. Those places now use the AttributeSet to represent
multiple attributes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174003 91177308-0d34-0410-b5e6-96231b3b80d8
There are still places which treat the Attribute object as a collection of
attributes. I'm systematically removing them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173990 91177308-0d34-0410-b5e6-96231b3b80d8
What I thought was going to be a quick thing has extended out a little bit in
time *sigh*. So after some thought in order to not cruft up the tree I am
removing this for now since it is the right thing to do.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173985 91177308-0d34-0410-b5e6-96231b3b80d8
and update ELF header e_flags.
Currently gathering information such as symbol,
section and data is done by collecting it in an
MCAssembler object. From MCAssembler and MCAsmLayout
objects ELFObjectWriter::WriteObject() forms and
streams out the ELF object file.
This patch just adds a few members to the MCAssember
class to store and access the e_flag settings. It
allows for runtime additions to the e_flag by
assembler directives. The standalone assembler can
get to MCAssembler from getParser().getStreamer().getAssembler().
This patch is the generic infrastructure and will be
followed by patches for ARM and Mips for their target
specific use.
Contributer: Jack Carter
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173882 91177308-0d34-0410-b5e6-96231b3b80d8
The AttributeSetNode contains all of the attributes. This removes one (hopefully
last) use of the Attribute class as a container of multiple attributes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173761 91177308-0d34-0410-b5e6-96231b3b80d8
conditions are met:
1. They share the same operand and are in the same BB.
2. Both outputs are used.
3. The target has a native instruction that maps to ISD::FSINCOS node or
the target provides a sincos library call.
Implemented the generic optimization in sdisel and enabled it for
Mac OSX. Also added an additional optimization for x86_64 Mac OSX by
using an alternative entry point __sincos_stret which returns the two
results in xmm0 / xmm1.
rdar://13087969
PR13204
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173755 91177308-0d34-0410-b5e6-96231b3b80d8
We no longer accept an encoded integer as representing all of the
attributes. Convert this via the AttrBuilder class into an AttributeSet with the
correct representation (an AttributeSetImpl that holds a list of Attribute
objects).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173750 91177308-0d34-0410-b5e6-96231b3b80d8
The AttributeWithIndex class exposed the interior structure of the AttributeSet
class. That was gross. Remove it and all of the code that relied upon it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173722 91177308-0d34-0410-b5e6-96231b3b80d8
This now uses the AttributeSet object instead of the Attribute /
AttributeWithIndex objects. It's fairly simple now. It goes through all of the
subsets before the one we're modifying, adds them to the new set. It then adds
the modified subset (with the requested attributes removed). And then adds the
rest of the subsets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173660 91177308-0d34-0410-b5e6-96231b3b80d8
This now uses the AttributeSet object instead of the Attribute /
AttributeWithIndex objects. It's fairly simple now. It goes through all of the
subsets before the one we're modifying, adds them to the new set. It then adds
the modified subset. And then adds the rest of the subsets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173659 91177308-0d34-0410-b5e6-96231b3b80d8