The optimization for locally used allocas was not safe for allocas that
were read before they were written. This change disables that optimization
in that case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@22318 91177308-0d34-0410-b5e6-96231b3b80d8
particular, invoke ret values are only live in the normal dest of the invoke
not in the unwind dest.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17108 91177308-0d34-0410-b5e6-96231b3b80d8
unneccesary. This allows us to delete several hundred phi nodes of the
form PHI(x,x,x,undef) from 253.perlbmk and probably other programs as well.
This implements Mem2Reg/UndefValuesMerge.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17098 91177308-0d34-0410-b5e6-96231b3b80d8
whose addresses where used by trivial phi nodes and select instructions. This
is now performed by the instcombine pass, which is more powerful, is much
simpler, and is faster. This allows the deletion of a bunch of code, two
FIXME's and two gotos.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16406 91177308-0d34-0410-b5e6-96231b3b80d8
Move include/Config and include/Support into include/llvm/Config,
include/llvm/ADT and include/llvm/Support. From here on out, all LLVM
public header files must be under include/llvm/.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@16137 91177308-0d34-0410-b5e6-96231b3b80d8
non-deterministic things like the ordering of blocks in the dominance
frontier of a BB. Unfortunately, I don't know of a better way to solve
this problem than to explicitly sort the BB's in function-order before
processing them. This is guaranteed to slow the pass down a bit, but
is absolutely necessary to get usable diffs between two different tools
executing the mem2reg or scalarrepl pass.
Before this, bazillions of spurious diff failures occurred all over the
place due to the different order of processing PHIs:
- %tmp.111 = getelementptr %struct.Connector_struct* %upcon.0.0, uint 0, uint 0
+ %tmp.111 = getelementptr %struct.Connector_struct* %upcon.0.1, uint 0, uint 0
Now, the diffs match.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@14244 91177308-0d34-0410-b5e6-96231b3b80d8
process them all as a group. This speeds up SRoA/mem2reg from 28.46s to
0.62s on the testcase from PR209.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11100 91177308-0d34-0410-b5e6-96231b3b80d8
"minimal" SSA form (in other words, it doesn't insert dead PHIs). This
speeds up the mem2reg pass very significantly because it doesn't have to
do a lot of frivolous work in many common cases.
In the 252.eon function I have been playing with, this doesn't even insert
the 120 PHI nodes that it used to which were trivially dead (in the process
of promoting 356 alloca instructions overall). This speeds up the mem2reg
pass from 1.2459s to 0.1284s. More significantly, the DCE pass used to take
2.4138s to remove the 120 dead PHI nodes that mem2reg constructed, now it
takes 0.0134s (which is the time to scan the function and decide that there
is nothing dead). So overall, on this one function, we speed things up a
total of 3.5179s, which is a 24.8x speedup! :)
This change is tested by the Mem2Reg/2003-10-05-DeadPHIInsertion.ll test,
which now passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8884 91177308-0d34-0410-b5e6-96231b3b80d8
basic block. This is amazingly common in code generated by the C/C++ front-ends.
This change makes it not have to insert ANY phi nodes, whereas before it would insert
a ton of dead ones which DCE would have to clean up.
Thus, this fix improves compile-time performance of these trivial allocas in two ways:
1. It doesn't have to do the walking and book-keeping for renaming
2. It does not insert dead phi nodes for them which would have to
subsequently be cleaned up.
On my favorite testcase from 252.eon, this special case handles 305 out of
356 promoted allocas in the function. It speeds up the mem2reg pass from 7.5256s
to 1.2505s. It inserts 677 fewer dead PHI nodes, which speeds up a subsequent
-dce pass from 18.7524s to 2.4806s.
There are still 120 trivially dead PHI nodes being inserted for variables used
in multiple basic blocks, but they are not handled by this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8881 91177308-0d34-0410-b5e6-96231b3b80d8
*** Revamp the code which handled unreachable code in the function. Now the
code is much more efficient for high-degree basic blocks, such as those
that occur in the 252.eon SPEC benchmark.
For the interested, the time to promote a SINGLE alloca in _ZN7mrScene4ReadERSi
function used to be > 3.5s. Now it is < .075s. The function has a LOT of
allocas in it, so it appeared to be infinite looping, this should make it much
nicer. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8863 91177308-0d34-0410-b5e6-96231b3b80d8
work-list of value definitions. This allows elimination of the explicit
'iterative' step of the algorithm, and also reuses temporary memory better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8861 91177308-0d34-0410-b5e6-96231b3b80d8
* Do not insert a new entry into NewPhiNodes during the rename pass if there are no PHIs in a block.
* Do not compute WriteSets in parallel
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8858 91177308-0d34-0410-b5e6-96231b3b80d8
* Eliminate the KillList instance variable, instead, just delete loads and
stores as they are "renamed", and delete allocas when they are done
* Make the 'visited' set an instance variable to avoid passing it on the stack.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8857 91177308-0d34-0410-b5e6-96231b3b80d8
* Make Mem2Reg assign version numbers now for renamed variables instead of
.mem2reg suffixes. This produces what people think of as SSA.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@5771 91177308-0d34-0410-b5e6-96231b3b80d8
* Renamed StatisticReporter.h/cpp to Statistic.h/cpp
* Broke constructor to take two const char * arguments instead of one, so
that indendation can be taken care of automatically.
* Sort the list by pass name when printing
* Make sure to print all statistics as a group, instead of randomly when
the statistics dtors are called.
* Updated ProgrammersManual with new semantics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@4002 91177308-0d34-0410-b5e6-96231b3b80d8
* Add new RegisterOpt/RegisterAnalysis templates for registering passes that
are to show up in opt or analyze
* Register Analyses now
* Change optimizations to use RegisterOpt instead of RegisterPass
* Add support for different "PassType's"
* Add new RegisterOpt/RegisterAnalysis templates for registering passes that
are to show up in opt or analyze
* Register Analyses now
* Change optimizations to use RegisterOpt instead of RegisterPass
* Remove getPassName implementations from various subclasses
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@3113 91177308-0d34-0410-b5e6-96231b3b80d8
PromoteInstance. Make them local variables that are passed around as
appropriate. Especially in the case of CurrentValue, this makes the
code simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@2374 91177308-0d34-0410-b5e6-96231b3b80d8
- Rename runOnMethod to runOnFunction
* Transform getAnalysisUsageInfo into getAnalysisUsage
- Method is now const
- It now takes one AnalysisUsage object to fill in instead of 3 vectors
to fill in
- Pass's now specify which other passes they _preserve_ not which ones
they modify (be conservative!)
- A pass can specify that it preserves all analyses (because it never
modifies the underlying program)
* s/Method/Function/g in other random places as well
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@2333 91177308-0d34-0410-b5e6-96231b3b80d8
class. The Method class is obsolete (renamed) and all references to it
are being converted over to Function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@2144 91177308-0d34-0410-b5e6-96231b3b80d8
