R600 was using a clamped version of rsq, but SI was not. Add a
new rsq_clamped intrinsic and use them consistently.
It's unclear to me from the documentation what behavior
the R600 instructions have, so I assume they have the legacy behavior
described by the SI documents. For R600, use RECIPSQRT_IEEE
for both llvm.AMDGPU.rsq.legacy and llvm.AMDGPU.rsq. R600 also
has RECIPSQRT_FF, which I'm not sure how it fits in here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211637 91177308-0d34-0410-b5e6-96231b3b80d8
PR20071 identifies a problem in PowerPC's fast-isel implementation for
floating-point conversion to integer. The fctiduz instruction was added in
Power ISA 2.06 (i.e., Power7 and later). However, this instruction is being
generated regardless of which 64-bit PowerPC target is selected.
The intent is for fast-isel to punt to DAG selection when this instruction is
not available. This patch implements that change. For testing purposes, the
existing fast-isel-conversion.ll test adds a RUN line for -mcpu=970 and tests
for the expected code generation. Additionally, the existing test
fast-isel-conversion-p5.ll was found to be incorrectly expecting the
unavailable instruction to be generated. I've removed these test variants
since we have adequate coverage in fast-isel-conversion.ll.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211627 91177308-0d34-0410-b5e6-96231b3b80d8
"Fix PR20056: Implement pseudo LDR <reg>, =<literal/label> for AArch64"
Missed files are added in this commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211605 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This instruction is re-encoded in MIPS32r6/MIPS64r6 without changing the
restrictions. We hadn't implemented it for earlier ISA's so it has been added to those too.
Differential Revision: http://reviews.llvm.org/D4265
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211590 91177308-0d34-0410-b5e6-96231b3b80d8
V' bit in the P2 byte of the EVEX prefix provides the top bit of the NDD and
NDS register fields. This was simply not used in the decoder until now.
Fixes <rdar://problem/17402661>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211565 91177308-0d34-0410-b5e6-96231b3b80d8
The extends the select lowering coverage by emiting pseudo cmov
instructions. These insturction will be later on lowered to control-flow to
simulate the select.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211545 91177308-0d34-0410-b5e6-96231b3b80d8
This extends the select lowering to support floating-point selects. The
lowering depends on SSE instructions and that the conditon comes from a
floating-point compare. Under this conditions it is possible to emit an
optimized instruction sequence that doesn't require any branches to
simulate the select.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211544 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is based on the changes from ARM target [1,2]
Based on ARM doc [3], if the literal value can be loaded with a valid MOV,
it can emit that instruction. This is implemented in this patch.
[1] Fix PR18345: ldr= pseudo instruction produces incorrect code when using in inline assembly
Author: David Peixotto <dpeixott@codeaurora.org>
commit b92cca2228 (r200777)
[2] Implement the ldr-pseudo opcode for ARM assembly
Author: David Peixotto <dpeixott@codeaurora.org>
commit 0fa193b086 (r197708)
[3] http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dui0802a/CJAHAIBC.html
Differential Revision: http://reviews.llvm.org/D4163
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211533 91177308-0d34-0410-b5e6-96231b3b80d8
As of r211495, the only remaining users of getMinCallFrameSize are in
core ABI code (LowerFormalParameter / LowerCall). This is actually a
good thing, since the details of the parameter save area are ABI specific.
With the new ELFv2 ABI in particular, the rules defining the size of the
save area will become significantly more complex, so it wouldn't make
sense to implement those outside ABI code that has all required
information.
In preparation, this patch eliminates the getMinCallFrameSize (and
associated getMinCallArgumentsSize) routines, and inlines them into all
callers. Note that since nearly all call arguments are constant, this
allows simplifying the inlined copies to a single line everywhere.
No change in generate code expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211497 91177308-0d34-0410-b5e6-96231b3b80d8
The PPCFrameLowering::determineFrameLayout routine currently ensures
that every function that allocates a stack frame provides space for the
parameter save area (via PPCFrameLowering::getMinCallFrameSize).
This is actually not necessary. There may be functions that never call
another routine but still allocate a frame; those do not require the
parameter save area. In the future, with the ELFv2 ABI, even some
routines that do call other functions do not need to allocate the
parameter save area.
While it is not a bug to allocate the parameter area when it is not
needed, it is better to avoid it to save stack space.
Note that when any particular function call requires the parameter save
area, this space will already have been included by ABI code in the size
the CALLSEQ_START insn is annotated with, and therefore included in the
size returned by MFI->getMaxCallFrameSize().
This means that determineFrameLayout simply does not need to care about
the parameter save area. (It still needs to ensure that every frame
provides the linkage area.) This is implemented by this patch.
Note that this exposed a bug in the new fast-isel code where the parameter
area was *not* included in the CALLSEQ_START size; this is also fixed.
A couple of test cases needed to be adapted for the new (smaller) stack
frame size those tests now see.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211495 91177308-0d34-0410-b5e6-96231b3b80d8
As remarked in the commit message to r211493, in several places
throughout the 64-bit SVR4 ABI code there are calls to
PPCFrameLowering::getLinkageSize and getMinCallFrameSize
using an incorrect IsDarwin argument of "true".
(Some of those were made explicit by the above refactoring patch, others
have been there all along.)
This patch fixes those places to pass "false" for IsDarwin.
No change in generated code expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211494 91177308-0d34-0410-b5e6-96231b3b80d8
The PPCISelLowering.cpp routines PPCTargetLowering::setMinReservedArea and
CalculateParameterAndLinkageAreaSize are currently used as subroutines
from both 64-bit SVR4 and Darwin ABI code.
However, the two ABIs are already quite different w.r.t. AltiVec
conventions, and they will become more different when the ELFv2 ABI is
supported. Also, in general it seems better to disentangle ABI support
routines for different ABIs to avoid accidentally affecting one ABI when
intending to change only the other.
(Actually, the current code strictly speaking already contains a bug:
these routines call PPCFrameLowering::getMinCallFrameSize and
PPCFrameLowering::getLinkageSize with the IsDarwin parameter set to
"true" even on 64-bit SVR4. This bug currently has no adverse effect
since those routines always return the same for 64-bit SVR4 and 64-bit
Darwin, but it still seems wrong ... I'll fix this in a follow-up
commit shortly.)
To remove this code sharing, I'm simply inlining both routines into all
call sites (there are just two each, one for 64-bit SVR4 and one for
Darwin), and simplifying due to constant parameters where possible.
A small piece of code that *does* make sense to share is refactored into
the new routine EnsureStackAlignment, now also called from 32-bit SVR4
ABI code.
No change in generated code is expected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211493 91177308-0d34-0410-b5e6-96231b3b80d8
Current 64-bit SVR4 code seems to have some remnants of Darwin code
in AltiVec argument handing. This had the effect that AltiVec arguments
(or subsequent arguments) were not correctly placed in the parameter area
in some cases.
The correct behaviour with the 64-bit SVR4 ABI is:
- All AltiVec arguments take up space in the parameter area, just like
any other arguments, whether vararg or not.
- They are always 16-byte aligned, skipping a parameter area doubleword
(and the associated GPR, if any), if necessary.
This patch implements the correct behaviour and adds a test case.
(Verified against GCC behaviour via the ABI compat test suite.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211492 91177308-0d34-0410-b5e6-96231b3b80d8
Strictly, it's unpredictable. But we don't quite model that yet and an error is
better than ignoring the issue. This one somehow got left out before though.
rdar://problem/15997748
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211490 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of separate SDIV/SREM. SDIV used UDIV which in turn used UDIVREM anyway.
SREM used SDIV(UDIV->UDIVREM)+MUL+SUB, using UDIVREM directly is more efficient.
v2: Don't use all caps names
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211477 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds ISel patterns to select SSE3/AVX ADDSUB instructions
from a sequence of "vadd + vsub + blend".
Example:
///
typedef float float4 __attribute__((ext_vector_type(4)));
float4 foo(float4 A, float4 B) {
float4 X = A - B;
float4 Y = A + B;
return (float4){X[0], Y[1], X[2], Y[3]};
}
///
Before this patch, (with flag -mcpu=corei7) llc produced the following
assembly sequence:
movaps %xmm0, %xmm2
addps %xmm1, %xmm2
subps %xmm1, %xmm0
blendps $10, %xmm2, %xmm0
With this patch, we now get a single
addsubps %xmm1, %xmm0
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211427 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables LLVM to emit Win64-native unwind info rather than
DWARF CFI. It handles all corner cases (I hope), including stack
realignment.
Because the unwind info is not flexible enough to describe stack frames
with a gap of unknown size in the middle, such as the one caused by
stack realignment, I modified register spilling code to place all spills
into the fixed frame slots, so that they can be accessed relative to the
frame pointer.
Patch by Vadim Chugunov!
Reviewed By: rnk
Differential Revision: http://reviews.llvm.org/D4081
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211399 91177308-0d34-0410-b5e6-96231b3b80d8
Mixing of AddAvailableValue and GetValueAtEndOfBlock methods of SSAUpdater
leaded to the endless loop generation when the nested loops annotated.
This fixes a bug in the OCL_ML/KNN OpenCV test. The test case is too
complex for FileCheck and would be very fragile.
Patch by: Elena Denisova
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211374 91177308-0d34-0410-b5e6-96231b3b80d8