The patch disabled unrolling in loop vectorization pass when VF==1 on x86 architecture,
by setting MaxInterleaveFactor to 1. Unrolling in loop vectorization pass may introduce
the cost of overflow check, memory boundary check and extra prologue/epilogue code when
regular unroller will unroll the loop another time. Disable it when VF==1 remove the
unnecessary cost on x86. The same can be done for other platforms after verifying
interleaving/memory bound checking to be not perf critical on those platforms.
Differential Revision: http://reviews.llvm.org/D9515
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@236613 91177308-0d34-0410-b5e6-96231b3b80d8
(reverted in r235533)
Original commit message:
"Calls to llvm::Value::mutateType are becoming extra-sensitive now that
instructions have extra type information that will not be derived from
operands or result type (alloca, gep, load, call/invoke, etc... ). The
special-handling for mutateType will get more complicated as this work
continues - it might be worth making mutateType virtual & pushing the
complexity down into the classes that need special handling. But with
only two significant uses of mutateType (vectorization and linking) this
seems OK for now.
Totally open to ideas/suggestions/improvements, of course.
With this, and a bunch of exceptions, we can roundtrip an indirect call
site through bitcode and IR. (a direct call site is actually trickier...
I haven't figured out how to deal with the IR deserializer's lazy
construction of Function/GlobalVariable decl's based on the type of the
entity which means looking through the "pointer to T" type referring to
the global)"
The remapping done in ValueMapper for LTO was insufficient as the types
weren't correctly mapped (though I was using the post-mapped operands,
some of those operands might not have been mapped yet so the type
wouldn't be post-mapped yet). Instead use the pre-mapped type and
explicitly map all the types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235651 91177308-0d34-0410-b5e6-96231b3b80d8
This patch refactors the definition of common utility function "isInductionPHI" to LoopUtils.cpp.
This fixes compilation error when configured with -DBUILD_SHARED_LIBS=ON
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235577 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r235458.
It looks like this might be breaking something LTO-ish. Looking into it
& will recommit with a fix/test case/etc once I've got more to go on.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235533 91177308-0d34-0410-b5e6-96231b3b80d8
Calls to llvm::Value::mutateType are becoming extra-sensitive now that
instructions have extra type information that will not be derived from
operands or result type (alloca, gep, load, call/invoke, etc... ). The
special-handling for mutateType will get more complicated as this work
continues - it might be worth making mutateType virtual & pushing the
complexity down into the classes that need special handling. But with
only two significant uses of mutateType (vectorization and linking) this
seems OK for now.
Totally open to ideas/suggestions/improvements, of course.
With this, and a bunch of exceptions, we can roundtrip an indirect call
site through bitcode and IR. (a direct call site is actually trickier...
I haven't figured out how to deal with the IR deserializer's lazy
construction of Function/GlobalVariable decl's based on the type of the
entity which means looking through the "pointer to T" type referring to
the global)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@235458 91177308-0d34-0410-b5e6-96231b3b80d8
(Re-apply r234361 with a fix and a testcase for PR23157)
Both run-time pointer checking and the dependence analysis are capable
of dealing with uniform addresses. I.e. it's really just an orthogonal
property of the loop that the analysis computes.
Run-time pointer checking will only try to reason about SCEVAddRec
pointers or else gives up. If the uniform pointer turns out the be a
SCEVAddRec in an outer loop, the run-time checks generated will be
correct (start and end bounds would be equal).
In case of the dependence analysis, we work again with SCEVs. When
compared against a loop-dependent address of the same underlying object,
the difference of the two SCEVs won't be constant. This will result in
returning an Unknown dependence for the pair.
When compared against another uniform access, the difference would be
constant and we should return the right type of dependence
(forward/backward/etc).
The changes also adds support to query this property of the loop and
modify the vectorizer to use this.
Patch by Ashutosh Nema!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234424 91177308-0d34-0410-b5e6-96231b3b80d8
Both run-time pointer checking and the dependence analysis are capable
of dealing with uniform addresses. I.e. it's really just an orthogonal
property of the loop that the analysis computes.
Run-time pointer checking will only try to reason about SCEVAddRec
pointers or else gives up. If the uniform pointer turns out the be a
SCEVAddRec in an outer loop, the run-time checks generated will be
correct (start and end bounds would be equal).
In case of the dependence analysis, we work again with SCEVs. When
compared against a loop-dependent address of the same underlying object,
the difference of the two SCEVs won't be constant. This will result in
returning an Unknown dependence for the pair.
When compared against another uniform access, the difference would be
constant and we should return the right type of dependence
(forward/backward/etc).
The changes also adds support to query this property of the loop and
modify the vectorizer to use this.
Patch by Ashutosh Nema!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234361 91177308-0d34-0410-b5e6-96231b3b80d8
The plan here is to push the API changes out from the common components
(like Constant::getGetElementPtr and IRBuilder::CreateGEP related
functions) and just update callers to either pass the type if it's
obvious, or pass null.
Do this with LoadInst as well and anything else that comes up, then to
start porting specific uses to not pass null anymore - this may require
some refactoring in each case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@234042 91177308-0d34-0410-b5e6-96231b3b80d8
The changes to InstCombine do seem a bit silly - it doesn't make
anything obviously better to have the caller access the pointers element
type (the thing I'm trying to remove) than the GEP itself, but it's a
helpful migration step. This will allow me to more obviously lock down
GEP (& Load, etc) API usage, then fix all the code that accesses pointer
element types except the places that need to be removed (most of the
InstCombines) anyway - at which point I'll need to just remove all that
code because it won't be meaningful anymore (there will be no pointer
types, so no bitcasts to combine)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233126 91177308-0d34-0410-b5e6-96231b3b80d8
Now the analysis won't "fail" if the memchecks exceed the threshold. It
is the transform pass' responsibility to perform the check.
This allows the transform pass to further analyze/eliminate the
memchecks. E.g. in Loop distribution we only need to check pointers
that end up in different partitions.
Note that there is a slight change of functionality here. The logic in
analyzeLoop is that if dependence checking fails due to non-constant
distance between the pointers, another attempt is made to prove safety
of the dependences purely using run-time checks.
Before this patch we could fail the loop due to exceeding the memcheck
threshold after the first step, now we only check the threshold in the
client after the full analysis. There is no measurable compile-time
effect but I wanted to record this here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231817 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Now that the DataLayout is a mandatory part of the module, let's start
cleaning the codebase. This patch is a first attempt at doing that.
This patch is not exactly NFC as for instance some places were passing
a nullptr instead of the DataLayout, possibly just because there was a
default value on the DataLayout argument to many functions in the API.
Even though it is not purely NFC, there is no change in the
validation.
I turned as many pointer to DataLayout to references, this helped
figuring out all the places where a nullptr could come up.
I had initially a local version of this patch broken into over 30
independant, commits but some later commit were cleaning the API and
touching part of the code modified in the previous commits, so it
seemed cleaner without the intermediate state.
Test Plan:
Reviewers: echristo
Subscribers: llvm-commits
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231740 91177308-0d34-0410-b5e6-96231b3b80d8
Runtime unrolling is an expensive optimization which can bring benefit
only if the loop is hot and iteration number is relatively large enough.
For some loops, we know they are not worth to be runtime unrolled.
The scalar loop from vectorization is one of the cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231631 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
DataLayout keeps the string used for its creation.
As a side effect it is no longer needed in the Module.
This is "almost" NFC, the string is no longer
canonicalized, you can't rely on two "equals" DataLayout
having the same string returned by getStringRepresentation().
Get rid of DataLayoutPass: the DataLayout is in the Module
The DataLayout is "per-module", let's enforce this by not
duplicating it more than necessary.
One more step toward non-optionality of the DataLayout in the
module.
Make DataLayout Non-Optional in the Module
Module->getDataLayout() will never returns nullptr anymore.
Reviewers: echristo
Subscribers: resistor, llvm-commits, jholewinski
Differential Revision: http://reviews.llvm.org/D7992
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@231270 91177308-0d34-0410-b5e6-96231b3b80d8
The only difference between these two is that VectorizerReport adds a
vectorizer-specific prefix to its messages. When LAA is used in the
vectorizer context the prefix is added when we promote the
LoopAccessReport into a VectorizerReport via one of the constructors.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229897 91177308-0d34-0410-b5e6-96231b3b80d8
When I split out LoopAccessReport from this, I need to create some temps
so constness becomes necessary.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229896 91177308-0d34-0410-b5e6-96231b3b80d8
Also add pass name as an argument to VectorizationReport::emitAnalysis.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229894 91177308-0d34-0410-b5e6-96231b3b80d8
This is a function pass that runs the analysis on demand. The analysis
can be initiated by querying the loop access info via LAA::getInfo. It
either returns the cached info or runs the analysis.
Symbolic stride information continues to reside outside of this analysis
pass. We may move it inside later but it's not a priority for me right
now. The idea is that Loop Distribution won't support run-time stride
checking at least initially.
This means that when querying the analysis, symbolic stride information
can be provided optionally. Whether stride information is used can
invalidate the cache entry and rerun the analysis. Note that if the
loop does not have any symbolic stride, the entry should be preserved
across Loop Distribution and LV.
Since currently the only user of the pass is LV, I just check that the
symbolic stride information didn't change when using a cached result.
On the LV side, LoopVectorizationLegality requests the info object
corresponding to the loop from the analysis pass. A large chunk of the
diff is due to LAI becoming a pointer from a reference.
A test will be added as part of the -analyze patch.
Also tested that with AVX, we generate identical assembly output for the
testsuite (including the external testsuite) before and after.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229893 91177308-0d34-0410-b5e6-96231b3b80d8
LAA will be an on-demand analysis pass, so we need to cache the result
of the analysis. canVectorizeMemory is renamed to analyzeLoop which
computes the result. canVectorizeMemory becomes the query function for
the cached result.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229892 91177308-0d34-0410-b5e6-96231b3b80d8
The transformation passes will query this and then emit them as part of
their own report. The currently only user LV is modified to do just
that.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229891 91177308-0d34-0410-b5e6-96231b3b80d8
As LAA is becoming a pass, we can no longer pass the params to its
constructor. This changes the command line flags to have external
storage. These can now be accessed both from LV and LAA.
VectorizerParams is moved out of LoopAccessInfo in order to shorten the
code to access it.
This commits also has the fix (D7731) to the break dependence cycle
between the analysis and vector libraries.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229890 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r229651.
I'd like to ultimately revert r229650 but this reformat stands in the
way. I'll reformat the affected files once the the loop-access pass is
fully committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229889 91177308-0d34-0410-b5e6-96231b3b80d8
r229622: "[LoopAccesses] Make VectorizerParams global"
r229623: "[LoopAccesses] Stash the report from the analysis rather than emitting it"
r229624: "[LoopAccesses] Cache the result of canVectorizeMemory"
r229626: "[LoopAccesses] Create the analysis pass"
r229628: "[LoopAccesses] Change debug messages from LV to LAA"
r229630: "[LoopAccesses] Add canAnalyzeLoop"
r229631: "[LoopAccesses] Add missing const to APIs in VectorizationReport"
r229632: "[LoopAccesses] Split out LoopAccessReport from VectorizerReport"
r229633: "[LoopAccesses] Add -analyze support"
r229634: "[LoopAccesses] Change LAA:getInfo to return a constant reference"
r229638: "Analysis: fix buildbots"
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229650 91177308-0d34-0410-b5e6-96231b3b80d8
The only difference between these two is that VectorizerReport adds a
vectorizer-specific prefix to its messages. When LAA is used in the
vectorizer context the prefix is added when we promote the
LoopAccessReport into a VectorizerReport via one of the constructors.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229632 91177308-0d34-0410-b5e6-96231b3b80d8
When I split out LoopAccessReport from this, I need to create some temps
so constness becomes necessary.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229631 91177308-0d34-0410-b5e6-96231b3b80d8
Also add pass name as an argument to VectorizationReport::emitAnalysis.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229628 91177308-0d34-0410-b5e6-96231b3b80d8
This is a function pass that runs the analysis on demand. The analysis
can be initiated by querying the loop access info via LAA::getInfo. It
either returns the cached info or runs the analysis.
Symbolic stride information continues to reside outside of this analysis
pass. We may move it inside later but it's not a priority for me right
now. The idea is that Loop Distribution won't support run-time stride
checking at least initially.
This means that when querying the analysis, symbolic stride information
can be provided optionally. Whether stride information is used can
invalidate the cache entry and rerun the analysis. Note that if the
loop does not have any symbolic stride, the entry should be preserved
across Loop Distribution and LV.
Since currently the only user of the pass is LV, I just check that the
symbolic stride information didn't change when using a cached result.
On the LV side, LoopVectorizationLegality requests the info object
corresponding to the loop from the analysis pass. A large chunk of the
diff is due to LAI becoming a pointer from a reference.
A test will be added as part of the -analyze patch.
Also tested that with AVX, we generate identical assembly output for the
testsuite (including the external testsuite) before and after.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229626 91177308-0d34-0410-b5e6-96231b3b80d8
blockNeedsPredication is in LoopAccess in order to share it with the
vectorizer. It's a utility needed by LoopAccess not strictly provided
by it but it's a good place to share it. This makes the function static
so that it no longer required to create an LoopAccessInfo instance in
order to access it from LV.
This was actually causing problems because it would have required
creating LAI much earlier that LV::canVectorizeMemory().
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229625 91177308-0d34-0410-b5e6-96231b3b80d8
LAA will be an on-demand analysis pass, so we need to cache the result
of the analysis. canVectorizeMemory is renamed to analyzeLoop which
computes the result. canVectorizeMemory becomes the query function for
the cached result.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229624 91177308-0d34-0410-b5e6-96231b3b80d8
The transformation passes will query this and then emit them as part of
their own report. The currently only user LV is modified to do just
that.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229623 91177308-0d34-0410-b5e6-96231b3b80d8
As LAA is becoming a pass, we can no longer pass the params to its
constructor. This changes the command line flags to have external
storage. These can now be accessed both from LV and LAA.
VectorizerParams is moved out of LoopAccessInfo in order to shorten the
code to access it.
This is part of the patchset that converts LoopAccessAnalysis into an
actual analysis pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@229622 91177308-0d34-0410-b5e6-96231b3b80d8