given in the Unicode spec
That is, replace every maximal subpart of an ill-formed subsequence with one
U+FFFD.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211015 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is very little difference between the big and little endian cases in
test/CodeGen/Mips/atomic.ll. Merge them together using multiple
FileCheck prefixes.
Depends on D4117
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4118
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211013 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The error message for the invalid.s cases isn't very helpful. It happens because
there is an instruction with a wider immediate that would have matched if the
NotMips32r6 predicate were true. I have some WIP to improve the message but it
affects most error messages for removed/re-encoded instructions on
MIPS32r6/MIPS64r6 and should therefore be a separate commit.
Depens on D4115
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4117
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211012 91177308-0d34-0410-b5e6-96231b3b80d8
As a follow-up to r210375 which canonicalizes addrspacecast
instructions, this patch canonicalizes addrspacecast constant
expressions.
Given clang uses ConstantExpr::getAddrSpaceCast to emit addrspacecast
cosntant expressions, this patch is also a step towards having the
frontend emit canonicalized addrspacecasts.
Piggyback a minor refactor in InstCombineCasts.cpp
Update three affected tests in addrspacecast-alias.ll,
access-non-generic.ll and constant-fold-gep.ll and added one new test in
constant-fold-address-space-pointer.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211004 91177308-0d34-0410-b5e6-96231b3b80d8
I haven't nailed this down entirely, but this is about as small of a
test case as I can seem to construct and adequately demonstrates the
crasher. I'll continue investigating the root cause/fix(es).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210993 91177308-0d34-0410-b5e6-96231b3b80d8
It's valid to use FP_TO_SINT when asking for a smaller type (e.g. all
"unsigned int16" values fit into a "signed int32"), but the reverse
isn't true.
Unfortunately, I'm not actually aware of any architecture with
asymmetric FP_TO_SINT and FP_TO_UINT handling and the logic happens to
work in the symmetric case, so I can't actually write a test for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210986 91177308-0d34-0410-b5e6-96231b3b80d8
There's probably no acatual change in behaviour here, just updating
the LowerFP_TO_INT function to be more similar to the reverse
implementation and updating costs to current CodeGen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210985 91177308-0d34-0410-b5e6-96231b3b80d8
This would assert if a constant address space was extern
and therefore didn't have an initializer. If the initializer
was undef, it would hit the unreachable unhandled initializer case.
An extern global should never really occur since we don't have
machine linking, but bugpoint likes to remove initializers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210967 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we handle finding abstract variables at the end of the module,
remove the upfront handling and just ensure the abstract variable is
built when necessary.
In theory we could have a split implementation, where inlined variables
are immediately constructed referencing the abstract definition, and
concrete variables are delayed - but let's go with one solution for now
unless there's a reason not to.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210961 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is to move GlobalMerge pass from Transform/Scalar
to CodeGen, because GlobalMerge depends on TargetMachine.
In the mean time, the macro INITIALIZE_TM_PASS is also moved
to CodeGen/Passes.h. With this fix we can avoid making
libScalarOpts depend on libCodeGen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210951 91177308-0d34-0410-b5e6-96231b3b80d8
Rather than relying on abstract variables looked up at the time the
concrete variable is created, look them up at the end of the module to
ensure they're referenced even if they're created after the concrete
definition. This completes/matches the work done in r209677 to handle
this for the subprograms themselves.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210946 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't fix the abstract variable handling yet, but it introduces a
similar delay mechanism as was added for subprograms, causing
DW_AT_location to be reordered to the beginning of the attribute list
for local variables, and fixes all the test fallout for that.
A subsequent commit will remove the abstract variable handling in
DbgVariable and just do the abstract variable lookup at module end to
ensure that abstract variables introduced after their concrete
counterparts are appropriately referenced by the concrete variable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210943 91177308-0d34-0410-b5e6-96231b3b80d8
In an effort to fix concrete variables referencing abstract origins
where the concrete variable preceeds the first inlined usage, the
addition of attributes such as name, file, etc will be delayed until the
end of the module (to wait to see if any inlined instances have
occurred, thus necessitating an abstract definition that the concrete
definition should also reference).
These test cases don't actually need to care about this ordering of
attributes, so update them to be more resilient to such changes coming
in the near future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210940 91177308-0d34-0410-b5e6-96231b3b80d8
This silently broke a long time ago when I unified some aspects of the
debug info schema. I'm just cleaning these up if/when they become a
problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210939 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to this change, error handling functions must be installed
and removed only inside of an llvm_[start/stop]_multithreading
pair. This change allows error handling functions to be installed
any time, and from any thread.
Reviewed by: chandlerc
Differential Revision: http://reviews.llvm.org/D4140
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210937 91177308-0d34-0410-b5e6-96231b3b80d8
Init-order and use-after-return modes can currently be enabled
by runtime flags. use-after-scope mode is not really working at the
moment.
The only problem I see is that users won't be able to disable extra
instrumentation for init-order and use-after-scope by a top-level Clang flag.
But this instrumentation was implicitly enabled for quite a while and
we didn't hear from users hurt by it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210924 91177308-0d34-0410-b5e6-96231b3b80d8
Lowering this new node allows us to fold the almost universal
comparison for success before it's even formed. Instead we can create
a copy from EFLAGS and an X86ISD::SETCC operation since all "cmpxchg"
instructions set the zero-flag to the correct value.
rdar://problem/13201607
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210923 91177308-0d34-0410-b5e6-96231b3b80d8
Move / delete some of the more obviously wrong
setOperationAction calls. Most of these are setting Expand
for types that aren't legal which is the default anyway.
Leave stuff that might require more thought on whether it's
junk or not as it is.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210922 91177308-0d34-0410-b5e6-96231b3b80d8
While std::error_code itself seems to work OK in all platforms, there
are few annoying differences with regards to the std::errc enumeration.
This patch adds a simple llvm enumeration, which will hopefully avoid build
breakages in other platforms and surprises as we get more uses of
std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210920 91177308-0d34-0410-b5e6-96231b3b80d8
This also simplifies the IR we create slightly: instead of working out
where success & failure should go manually, it turns out we can just
always jump to a success/failure block created for the purpose. Later
phases will sort out the mess without much difficulty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210917 91177308-0d34-0410-b5e6-96231b3b80d8
This has two benefits: it makes the result more suitable for direct
insertaion into the struct to emulate the new cmpxchg, and it means
the name we give the instruction matches its actual effect better.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210916 91177308-0d34-0410-b5e6-96231b3b80d8
