This is another step along the way to making all DIScopes have a common prefix
which can be added to in a general manner to support using directives
(DW_TAG_imported_module).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177462 91177308-0d34-0410-b5e6-96231b3b80d8
Apparently my final cleanup to use a relevant suffix for these tests before
committing r176831 caused them to stop running since lit wasn't configured to
run tests with that suffix in those directories (why don't we just have a
global suffix list?). So, add the suffix to the relevant directories & fix the
test that has bitrotted over the last week due to my debug info schema changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177315 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first step to making all DIScopes have a common metadata prefix (so
that things (using directives, for example) that can appear in any scope can be
added to that common prefix). DIFile is itself a DIScope so the common prefix
of all DIScopes cannot be a DIFile - instead it's the raw filename/directory
name pair.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177239 91177308-0d34-0410-b5e6-96231b3b80d8
This is the next step towards making the metadata for DIScopes have a common
prefix rather than having to delegate based on their tag type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176913 91177308-0d34-0410-b5e6-96231b3b80d8
This could be 'null' or the empty string, DIDescriptor::getStringField
coalesces the two cases anyway so it's just a matter of legible/efficient
representation.
The change in behavior of the DICompileUnit::get* functions could be
subsumed by the full verification check - but ideally that should just be an
assertion if we could front-load the actual debug info metadata failure paths.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176907 91177308-0d34-0410-b5e6-96231b3b80d8
These cases were found by further work to remove support for debug info
versioning. Common cleanups (other than changing the version info in the tag
field) included adding the last parameter to compile_units (recently added for
fission support) and other cases of trailing fields in lexical blocks, compile
units, and subprograms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176834 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Statistics are still available in Release+Asserts (any +Asserts builds),
and stats can also be turned on with LLVM_ENABLE_STATS.
Move some of the FastISel stats that were moved under DEBUG()
back out of DEBUG(), since stats are disabled across the board now.
Many tests depend on grepping "-stats" output. Move those into
a orig_dir/Stats/. so that they can be marked as unsupported
when building without statistics.
Differential Revision: http://llvm-reviews.chandlerc.com/D486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176733 91177308-0d34-0410-b5e6-96231b3b80d8
To find the last use of a register unit, start from the bottom and scan
upwards until a user is found.
<rdar://problem/13353090>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176706 91177308-0d34-0410-b5e6-96231b3b80d8
Mostly this is just changing the named metadata (llvm.dbg.sp, llvm.dbg.gv,
llvm.dbg.<func>.lv, etc -> llvm.dbg.cu), adding a few fields to older records
(DIVariable: flags/inlined-at, DICompileUnit: sp/gv/types,
DISubprogram: local variables list)
The tests to update were discovered by a change I'm working on to remove debug
info version support - so any tests using old debug info versions I haven't
updated probably are bad tests or just not actually designed to test debug
info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176671 91177308-0d34-0410-b5e6-96231b3b80d8
That can usually be lowered efficiently and is common in sandybridge code.
It would be nice to do this in DAGCombiner but we can't insert arbitrary
BUILD_VECTORs this late.
Fixes PR15462.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176634 91177308-0d34-0410-b5e6-96231b3b80d8
- Phi nodes should be replaced/updated after lowering CMOV into branch
because 'mainMBB' updating operand in Phi node is changed.
- Add EFLAGS in livein before lowering the 2nd CMOV. It's necessary as
we will reuse the EFLAGS generated before the 1st lowered CMOV, which
won't clobber EFLAGS. However, we need explicitly specify that.
- '-attr=-cmov' test case are added.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176598 91177308-0d34-0410-b5e6-96231b3b80d8
- Clear 'mayStore' flag when loading from the atomic variable before the
spin loop
- Clear kill flag from one use to multiple use in registers forming the
address to that atomic variable
- don't use a physical register as live-in register in BB (neither entry
nor landing pad.) by copying it into virtual register
(patch by Cameron Zwarich)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176538 91177308-0d34-0410-b5e6-96231b3b80d8
* Only apply divide bypass optimization when not optimizing for size.
* Fixed bug caused by constant for 0 value of type Int32,
used dividend type to generate the constant instead.
* For atom x86-64 apply the divide bypass to use 16-bit divides instead of
64-bit divides when operand values are small enough.
* Added lit tests for 64-bit divide bypass.
Patch by Tyler Nowicki!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176442 91177308-0d34-0410-b5e6-96231b3b80d8
- These tests wont't crash on trunk but would be better to add them so that
they don't break again in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176369 91177308-0d34-0410-b5e6-96231b3b80d8
- ISD::SHL/SRL/SRA must have either both scalar or both vector operands
but TLI.getShiftAmountTy() so far only return scalar type. As a
result, backend logic assuming that breaks.
- Rename the original TLI.getShiftAmountTy() to
TLI.getScalarShiftAmountTy() and re-define TLI.getShiftAmountTy() to
return target-specificed scalar type or the same vector type as the
1st operand.
- Fix most TICG logic assuming TLI.getShiftAmountTy() a simple scalar
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176364 91177308-0d34-0410-b5e6-96231b3b80d8
These are two related changes (one in llvm, one in clang).
LLVM:
- rename address_safety => sanitize_address (the enum value is the same, so we preserve binary compatibility with old bitcode)
- rename thread_safety => sanitize_thread
- rename no_uninitialized_checks -> sanitize_memory
CLANG:
- add __attribute__((no_sanitize_address)) as a synonym for __attribute__((no_address_safety_analysis))
- add __attribute__((no_sanitize_thread))
- add __attribute__((no_sanitize_memory))
for S in address thread memory
If -fsanitize=S is present and __attribute__((no_sanitize_S)) is not
set llvm attribute sanitize_S
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176075 91177308-0d34-0410-b5e6-96231b3b80d8
- Check whether SSE is available before lowering all 1s vector building with
PCMPEQD, which is only available from SSE2
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176058 91177308-0d34-0410-b5e6-96231b3b80d8
fewer scalar integer (i32 or i64) arguments. It completely eliminates the need
for SDISel for trivial functions.
Also, add the new llc -fast-isel-abort-args option, which is similar to
-fast-isel-abort option, but for formal argument lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176052 91177308-0d34-0410-b5e6-96231b3b80d8
memory intrinsics in the SDAG builder.
When alignment is zero, the lang ref says that *no* alignment
assumptions can be made. This is the exact opposite of the internal API
contracts of the DAG where alignment 0 indicates that the alignment can
be made to be anything desired.
There is another, more explicit alignment that is better suited for the
role of "no alignment at all": an alignment of 1. Map the intrinsic
alignment to this early so that we don't end up generating aligned DAGs.
It is really terrifying that we've never seen this before, but we
suddenly started generating a large number of alignment 0 memcpys due to
the new code to do memcpy-based copying of POD class members. That patch
contains a bug that rounds bitfield alignments down when they are the
first field. This can in turn produce zero alignments.
This fixes weird crashes I've seen in library users of LLVM on 32-bit
hosts, etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176022 91177308-0d34-0410-b5e6-96231b3b80d8
It was incorrectly checking a Function* being an IntrinsicInst* which
isn't possible. It should always have been checking the CallInst* instead.
Added test case for x86 which ensures we only get one constant load.
It was 2 before this change.
rdar://problem/13267920
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175853 91177308-0d34-0410-b5e6-96231b3b80d8
A legal BUILD_VECTOR goes in and gets constant folded into another legal
BUILD_VECTOR so we don't lose any legality here. The problematic PPC
optimization that made this check necessary was fixed recently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175759 91177308-0d34-0410-b5e6-96231b3b80d8
- When extloading from a vector with non-byte-addressable element, e.g.
<4 x i1>, the current logic breaks. Extend the current logic to
fix the case where the element type is not byte-addressable by loading
all bytes, bit-extracting/packing each element.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175642 91177308-0d34-0410-b5e6-96231b3b80d8