disassembler requires a MCSubtargetInfo and a
MCInstrInfo to exist in order to initialize the
instruction printer and disassembler; however,
although the printer and disassembler keep
references to these objects they do not own them.
Previously, the MCSubtargetInfo and MCInstrInfo
objects were just leaked.
I have extended LLVMDisasmContext to own these
objects and delete them when it is destroyed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154192 91177308-0d34-0410-b5e6-96231b3b80d8
ARM and Thumb2 mode can use cmn instructions to compare against negative
immediates. Thumb1 mode can't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154183 91177308-0d34-0410-b5e6-96231b3b80d8
simplification has been performed. This is a bit less efficient
(requires another ilist walk of the basic blocks) but shouldn't matter
in practice. More importantly, it's just too much work to keep track of
all the various ways the return instructions can be mutated while
simplifying them. This fixes yet another crasher, reported by Daniel
Dunbar.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154179 91177308-0d34-0410-b5e6-96231b3b80d8
dead code, including dead return instructions in some cases. Otherwise,
we end up having a bogus poniter to a return instruction that blows up
much further down the road.
It turns out that this pattern is both simpler to code, easier to update
in the face of enhancements to the inliner cleanup, and likely cheaper
given that it won't add dead instructions to the list.
Thanks to John Regehr's numerous test cases for teasing this out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154157 91177308-0d34-0410-b5e6-96231b3b80d8
We had special instructions for iOS because r9 is call-clobbered, but
that is represented dynamically by the register mask operands now, so
there is no need for the pseudo-instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154144 91177308-0d34-0410-b5e6-96231b3b80d8
The load/store optimizer splits LDRD/STRD into two instructions when the
register pairing doesn't work out. For negative offsets in Thumb2, it uses
t2STRi8 to do that. That's fine, except for the case when the offset is in
the range [-4,-1]. In that case, we'll also form a second t2STRi8 with
the original offset plus 4, resulting in a t2STRi8 with a non-negative
offset, which ends up as if it were an STRT, which is completely bogus.
Similarly for loads.
No testcase, unfortunately, as any I've been able to construct is both large
and extremely fragile.
rdar://11193937
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154141 91177308-0d34-0410-b5e6-96231b3b80d8
The empty 1-argument operator delete is for the benefit of the
destructor. A couple of spot checks of running yaml-bench under
valgrind against a few of the files under test/YAMLParser did
not reveal any leaks introduced by this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154137 91177308-0d34-0410-b5e6-96231b3b80d8
Consider the following program:
$ cat main.c
void foo(void) { }
int main(int argc, char *argv[]) {
foo();
return 0;
}
$ cat bundle.c
extern void foo(void);
void bar(void) {
foo();
}
$ clang -o main main.c
$ clang -o bundle.so bundle.c -bundle -bundle_loader ./main
$ nm -m bundle.so
0000000000000f40 (__TEXT,__text) external _bar
(undefined) external _foo (from executable)
(undefined) external dyld_stub_binder (from libSystem)
$ clang -o main main.c -O4
$ clang -o bundle.so bundle.c -bundle -bundle_loader ./main
Undefined symbols for architecture x86_64:
"_foo", referenced from:
_bar in bundle-elQN6d.o
ld: symbol(s) not found for architecture x86_64
clang: error: linker command failed with exit code 1 (use -v to see invocation)
The linker was told that the 'foo' in 'main' was 'internal' and had no uses, so
it was dead stripped.
Another situation is something like:
define void @foo() {
ret void
}
define void @bar() {
call asm volatile "call _foo" ...
ret void
}
The only use of 'foo' is inside of an inline ASM call. Since we don't look
inside those for uses of functions, we don't specify this as a "use."
Get around this by not invoking the 'internalize' pass by default. This is an
admitted hack for LTO correctness.
<rdar://problem/11185386>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154124 91177308-0d34-0410-b5e6-96231b3b80d8
'add r2, #-1024' should just use 'sub r2, #1024' rather than erroring out.
Thumb1 aliases for adding a negative immediate to the stack pointer,
also.
rdar://11192734
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154123 91177308-0d34-0410-b5e6-96231b3b80d8
This enables debuggers to see what are interesting lines for a
breakpoint rather than any line that starts a function.
rdar://9852092
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154120 91177308-0d34-0410-b5e6-96231b3b80d8
LSR always tries to make the ICmp in the loop latch use the incremented
induction variable. This allows the induction variable to be kept in a
single register.
When the induction variable limit is equal to the stride,
SimplifySetCC() would break LSR's hard work by transforming:
(icmp (add iv, stride), stride) --> (cmp iv, 0)
This forced us to use lea for the IC update, preventing the simpler
incl+cmp.
<rdar://problem/7643606>
<rdar://problem/11184260>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154119 91177308-0d34-0410-b5e6-96231b3b80d8
of the BBVectorizePass without using command line option. As pointed out
by Hal, we can ask the TargetLoweringInfo for the architecture specific
VectorizeConfig to perform vectorizing with architecture specific
information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154096 91177308-0d34-0410-b5e6-96231b3b80d8
BasicBlock in other passes, e.g. we can call vectorizeBasicBlock in the
loop unroll pass right after the loop is unrolled.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154089 91177308-0d34-0410-b5e6-96231b3b80d8
the caller requested a null-terminated one.
When mapping the file there could be a racing issue that resulted in the file being larger
than the FileSize passed by the caller. We already have an assertion
for this in MemoryBuffer::init() but have a runtime guarantee that
the buffer will be null-terminated, so do a copy that adds a null-terminator.
Protects against crash of rdar://11161822.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154082 91177308-0d34-0410-b5e6-96231b3b80d8
LSR can fold three addressing modes into its ICmpZero node:
ICmpZero BaseReg + Offset => ICmp BaseReg, -Offset
ICmpZero -1*ScaleReg + Offset => ICmp ScaleReg, Offset
ICmpZero BaseReg + -1*ScaleReg => ICmp BaseReg, ScaleReg
The first two cases are only used if TLI->isLegalICmpImmediate() likes
the offset.
Make sure the right Offset sign is passed to this method in the second
case. The ARM version is not symmetric.
<rdar://problem/11184260>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154079 91177308-0d34-0410-b5e6-96231b3b80d8
types for N32 ABI. Test case will be updated after the patch that fixes
TargetLowering::getPICJumpTableRelocBase is checked in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154036 91177308-0d34-0410-b5e6-96231b3b80d8
A MOVCCr instruction can be commuted by inverting the condition. This
can help reduce register pressure and remove unnecessary copies in some
cases.
<rdar://problem/11182914>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@154033 91177308-0d34-0410-b5e6-96231b3b80d8
