The list of subtarget features for the 7em triple contains 't2xtpk',
which actually disables that subtarget feature. Correct that to
'+t2xtpk' and test that the instructions enabled by that feature do
actually work.
Differential Revision: http://reviews.llvm.org/D9936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238022 91177308-0d34-0410-b5e6-96231b3b80d8
This change to VirtRegRewriter::addMBBLiveIns adds live-in registers for each
MachineBasicBlock's LiveIns set without isLiveIn checks as they are being added
because doing so is expensive. After all live-in registers are added, the LiveIn
vectors are sorted and uniqued.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238008 91177308-0d34-0410-b5e6-96231b3b80d8
Shave a pointer off of `MCSymbolName` by storing `StringMapEntry<bool>*`
instead of `StringRef`. This brings `sizeof(MCSymbol)` down to 64 on
64-bit platforms, a nice round number. My profile showed memory
dropping from 914 MB down to 908 MB, roughly 0.7%. Other than memory
usage, no functionality change here.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238005 91177308-0d34-0410-b5e6-96231b3b80d8
Save a pointer for each `MCSymbol`, bringing `llc` memory usage down
from 920 MB to 914 MB, around ~0.6%.
(I'm looking at `llc` memory usage on `verify-uselistorder.lto.opt.bc`;
see r236629 for details.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238003 91177308-0d34-0410-b5e6-96231b3b80d8
Lift `MCSymbolData::Index` up a level to `MCSymbol`, as preparation for
packing it into the bitfield in `MCSymbol`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238001 91177308-0d34-0410-b5e6-96231b3b80d8
llvm/include/llvm/DebugInfo/DIContext.h:144:11: error: overriding ‘virtual llvm::LoadedObjectInfo::~LoadedObjectInfo() noexcept (true)’
It seems the destructor in the base class may not be "default".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238000 91177308-0d34-0410-b5e6-96231b3b80d8
Previously `SDDbgValue`s used the general allocator that lives for all
of `SelectionDAG`. Instead, give them their own allocator, and reset it
whenever `SDDbgInfo::clear()` is called, plugging a spiritual leak.
This drops `SelectionDAGBuilder::visitIntrinsicCall()` off of my heap
profile (was at around 2% of `llc` for codegen of `-flto -g`). Thanks
to Pete Cooper for spotting the problem and suggesting the fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237998 91177308-0d34-0410-b5e6-96231b3b80d8
Cleanup how `SDDbgValue` is initialized, and rearrange the fields to
save two pointers in the struct layout. No real functionality change
though (and I doubt the memory savings would show up in a profile).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237997 91177308-0d34-0410-b5e6-96231b3b80d8
This change does a few things:
- Move some InstCombine transforms to InstSimplify
- Run SimplifyCall from within InstCombine::visitCallInst
- Teach InstSimplify to fold [us]mul_with_overflow(X, undef) to 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237995 91177308-0d34-0410-b5e6-96231b3b80d8
problem instead of suggesting doing something that is trivial to do but
incorrect given the current design of the libraries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237994 91177308-0d34-0410-b5e6-96231b3b80d8
simplified model for use simulating each iteration into a separate
helper function that just returns the cache.
Building this cache had nothing to do with the rest of the unroll
analysis and so this removes an unnecessary coupling, etc. It should
also make it easier to think about the concept of providing fast cached
access to basic SCEV models as an orthogonal concept to the overall
unroll simulation.
I'd really like to see this kind of caching logic folded into SCEV
itself, it seems weird for us to provide it at this layer rather than
making repeated queries into SCEV fast all on their own.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237993 91177308-0d34-0410-b5e6-96231b3b80d8
a single location.
This reduces code duplication a bit and will also pave the way for
a better separation between the visitation algorithm and the unroll
analysis.
No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237990 91177308-0d34-0410-b5e6-96231b3b80d8
PR23608 pointed out that using the preheader to gain a context instruction isn't always legal because a loop might not have a preheader. When looking into that, I realized that using the preheader to determine legality for sinking is questionable at best. Given no test covers that case and the original commit didn't seem to intend it, I restructured the code to only ask context sensative queries for hoising of loads and stores. This is effectively a partial revert of 237593.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237985 91177308-0d34-0410-b5e6-96231b3b80d8
- Add a late pass to expand pseudo instructions (tail call and EH returns).
Instead of doing it in the prologue emission.
- Factor some static methods in X86FrameLowering to ease code sharing.
NFC.
Related to <rdar://problem/20821487>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237977 91177308-0d34-0410-b5e6-96231b3b80d8
As noted in the original review, this is unused in tree & is used by
Julia... that's problematic. This API coudl easily be deleted/modified
by accident without any validation that it remains correct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237976 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, I can't reduce a small test case for this (although compiling
mpfr-3.1.2 with -O2 -mcpu=a2 would fairly reliably trigger a crash), but the
problem is fairly clear (at least once you know you're looking for one). If the
TLS instruction being replaced was at the end of the block, we'd increment the
iterator past it (so it would then point to MBB.end()), and then we'd increment
it again as part of the for statement, thus overrunning the end of the list.
Don't do that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237974 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
x = &a[i];
y = &a[i + j];
=>
y = x + j;
along with some refactoring work such as extracting method
findClosestMatchingDominator.
Depends on D9786 which provides the ScalarEvolution::getGEPExpr interface.
Test Plan: nary-gep.ll
Reviewers: meheff, broune
Reviewed By: broune
Subscribers: jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D9802
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237971 91177308-0d34-0410-b5e6-96231b3b80d8
A refactoring made @llvm.ssub.with.overflow.i32(i32 %X, i32 0) transform
into undef instead of %X.
This fixes PR23624.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237968 91177308-0d34-0410-b5e6-96231b3b80d8
This is consistent with other uses of the operand list. I'm planning a future commit where this will actually matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237967 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to this patch, we could update the operand of another MI in the same
bundle.
Longer version:
Before InlineSpiller rematerializes a vreg, it iterates over operands of each MI
in a bundle, collecting all (MI, OpNo) pairs that reference that vreg.
Then if it does rematerialize, it goes through the pair list and replaces the
operands with the new (rematerialized) vreg. The problem is, it tries to
replace all of these operands in the main MI ! This works fine for single MIs.
However, if we are processing a bundle of MIs and the list contains multiple
pairs - the rematerialization will either crash trying to access a non-existing
operand of the main MI, or silently corrupt one of the existing ones. It will
also ignore other MIs in the bundle.
The obvious fix is to use the MI pointers saved in collected (MI, OpNo) pairs.
This must have been the original intent of the pair list but somehow these
pointers got lost.
Patch by Dmitri Shtilman <dshtilman@icloud.com>!
Differential revision: http://reviews.llvm.org/D9904
<rdar://problem/21002163>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237964 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This supersedes http://reviews.llvm.org/D4010, hopefully properly
dealing with the JIT case and also adds an actual test case.
DwarfContext was basically already usable for the JIT (and back when
we were overwriting ELF files it actually worked out of the box by
accident), but in order to resolve relocations correctly it needs
to know the load address of the section.
Rather than trying to get this out of the ObjectFile or requiring
the user to create a new ObjectFile just to get some debug info,
this adds the capability to pass in that info directly.
As part of this I separated out part of the LoadedObjectInfo struct
from RuntimeDyld, since it is now required at a higher layer.
Reviewers: lhames, echristo
Reviewed By: echristo
Subscribers: vtjnash, friss, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D6961
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237961 91177308-0d34-0410-b5e6-96231b3b80d8
The raw non-instruction/constant form of this is still relying on being
able to access the pointee type from a pointer type - those will be
cleaned up later. For now, just focus on the cases where the pointee
type is easily accessible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237958 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is a 2nd attempt at committing the initial MIR serialization patch.
The first commit (r237708) made the incremental buildbots unstable and was
reverted in r237730. The original commit didn't add a terminating null
character to the LLVM IR source which was passed to LLParser, and this
sometimes caused the test 'llvmIR.mir' to fail with a parsing error because
the LLVM IR source didn't have a null character immediately after the end
and thus LLLexer encountered some garbage characters that ultimately caused
the error.
This commit also includes the other test fixes I committed in
r237712 (llc path fix) and r237723 (remove target triple) which
also got reverted in r237730.
--Original Commit Message--
MIR Serialization: print and parse LLVM IR using MIR format.
This commit is the initial commit for the MIR serialization project.
It creates a new library under CodeGen called 'MIR'. This new
library adds a new machine function pass that prints out the LLVM IR
using the MIR format. This pass is then added as a last pass when a
'stop-after' option is used in llc. The new library adds the initial
functionality for parsing of MIR files as well. This commit also
extends the llc tool so that it can recognize and parse MIR input files.
Reviewers: Duncan P. N. Exon Smith, Matthias Braun, Philip Reames
Differential Revision: http://reviews.llvm.org/D9616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237954 91177308-0d34-0410-b5e6-96231b3b80d8
My recent patch to add support for ISA 2.07 vector pack/unpack
instructions didn't properly check for availability of the vpkudum
instruction when recognizing it as a special vector shuffle case.
This causes us to leave the vector shuffle in place (rather than
converting it to a vector permute) so that it can be recognized later
as a vpkudum, but that pattern is invalid for processors prior to
POWER8. Thus LLVM crashes with an "unable to select" message. We
observed this since one of our buildbots is configured to generate
code for a POWER7.
This patch fixes the problem by checking for availability of the
vpkudum instruction during custom lowering of vector shuffles.
I've added a test case variant for the vpkudum pattern when the
instruction isn't available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237952 91177308-0d34-0410-b5e6-96231b3b80d8
so DWARF skeleton CUs can be expression in IR. A skeleton CU is a
(typically empty) DW_TAG_compile_unit that has a DW_AT_(GNU)_dwo_name and
a DW_AT_(GNU)_dwo_id attribute. It is used to refer to external debug info.
This is a prerequisite for clang module debugging as discussed in
http://lists.cs.uiuc.edu/pipermail/cfe-dev/2014-November/040076.html.
In order to refer to external types stored in split DWARF (dwo) objects,
such as clang modules, we need to emit skeleton CUs, which identify the
dwarf object (i.e., the clang module) by filename (the SplitDebugFilename)
and a hash value, the dwo_id.
This patch only contains the IR changes. The idea is that a CUs with a
non-zero dwo_id field will be emitted together with a DW_AT_GNU_dwo_name
and DW_AT_GNU_dwo_id attribute.
http://reviews.llvm.org/D9488
rdar://problem/20091852
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237949 91177308-0d34-0410-b5e6-96231b3b80d8
On X86 (and similar OOO cores) unrolling is very limited, and even if the
runtime unrolling is otherwise profitable, the expense of a division to compute
the trip count could greatly outweigh the benefits. On the A2, we unroll a lot,
and the benefits of unrolling are more significant (seeing a 5x or 6x speedup
is not uncommon), so we're more able to tolerate the expense, on average, of a
division to compute the trip count.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@237947 91177308-0d34-0410-b5e6-96231b3b80d8
