to create a JIT. This lets you specify JIT-specific configuration items
like the JITMemoryManager to use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44647 91177308-0d34-0410-b5e6-96231b3b80d8
This allows an important optimization to be re-enabled.
- If all uses / defs of a split interval can be folded, give the interval a
low spill weight so it would not be picked in case spilling is needed (avoid
pushing other intervals in the same BB to be spilled).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44601 91177308-0d34-0410-b5e6-96231b3b80d8
throw exceptions", just mark intrinsics with the nounwind
attribute. Likewise, mark intrinsics as readnone/readonly
and get rid of special aliasing logic (which didn't use
anything more than this anyway).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44544 91177308-0d34-0410-b5e6-96231b3b80d8
into alias analysis. This meant updating the API
which now has versions of the getModRefBehavior,
doesNotAccessMemory and onlyReadsMemory methods
which take a callsite parameter. These should be
used unless the callsite is not known, since in
general they can do a better job than the versions
that take a function. Also, users should no longer
call the version of getModRefBehavior that takes
both a function and a callsite. To reduce the
chance of misuse it is now protected.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44487 91177308-0d34-0410-b5e6-96231b3b80d8
attributes. While there, I noticed that not all
attribute methods returned a pointer-to-constant,
so I fixed that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44457 91177308-0d34-0410-b5e6-96231b3b80d8
in the middle of a split basic block, create a new live interval starting at
the def. This avoid artifically extending the live interval over a number of
cycles where it is dead. e.g.
bb1:
= vr1204 (use / kill) <= new interval starts and ends here.
...
...
vr1204 = (new def) <= start a new interval here.
= vr1204 (use)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44436 91177308-0d34-0410-b5e6-96231b3b80d8
the function type, instead they belong to functions
and function calls. This is an updated and slightly
corrected version of Reid Spencer's original patch.
The only known problem is that auto-upgrading of
bitcode files doesn't seem to work properly (see
test/Bitcode/AutoUpgradeIntrinsics.ll). Hopefully
a bitcode guru (who might that be? :) ) will fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44359 91177308-0d34-0410-b5e6-96231b3b80d8
trivial difference in function attributes, allow calls to it to
be converted to direct calls. Based on a patch by Török Edwin.
While there, move the various lists of mutually incompatible
parameters etc out of the verifier and into ParameterAttributes.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44315 91177308-0d34-0410-b5e6-96231b3b80d8
1) Change the interface to TargetLowering::ExpandOperationResult to
take and return entire NODES that need a result expanded, not just
the value. This allows us to handle things like READCYCLECOUNTER,
which returns two values.
2) Implement (extremely limited) support in LegalizeDAG::ExpandOp for MERGE_VALUES.
3) Reimplement custom lowering in LegalizeDAGTypes in terms of the new
ExpandOperationResult. This makes the result simpler and fully
general.
4) Implement (fully general) expand support for MERGE_VALUES in LegalizeDAGTypes.
5) Implement ExpandOperationResult support for ARM f64->i64 bitconvert and ARM
i64 shifts, allowing them to work with LegalizeDAGTypes.
6) Implement ExpandOperationResult support for X86 READCYCLECOUNTER and FP_TO_SINT,
allowing them to work with LegalizeDAGTypes.
LegalizeDAGTypes now passes several more X86 codegen tests when enabled and when
type legalization in LegalizeDAG is ifdef'd out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44300 91177308-0d34-0410-b5e6-96231b3b80d8
http://llvm.org/viewvc/llvm-project?rev=44199&view=rev
This patch completely broke serialization due to an invariant I assumed but
did not hold. The assumed invariant was that all pointer IDs emitted by a call
to BatchEmitOwnedPtrs would be consecutive. This is only the case if there has
been no forward references to an owned pointer (and hence already registered
with the Serializer object).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44203 91177308-0d34-0410-b5e6-96231b3b80d8
Deserialize::ReadDiffPtrID to read and emit bools instead of unsigned
integers. This should result in a nice space optimization once we have
"auto-abbreviation" generation in place.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44200 91177308-0d34-0410-b5e6-96231b3b80d8
SerializedPtrID, followed by the *differences* in IDs. The big idea is that
most IDs will be just be 1 off from the previous (either that or NULL, which
we encode as a difference if 0), so this will greatly reduce the encoding
space for extra IDs to just 1 bit per pointer.
So far this optimization reduces serialization of Carbon.h by only 1%, but
we aren't using any abbreviations now in the Bitcode file to properly take
advantage of this optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44199 91177308-0d34-0410-b5e6-96231b3b80d8
When a live interval is being spilled, rather than creating short, non-spillable
intervals for every def / use, split the interval at BB boundaries. That is, for
every BB where the live interval is defined or used, create a new interval that
covers all the defs and uses in the BB.
This is designed to eliminate one common problem: multiple reloads of the same
value in a single basic block. Note, it does *not* decrease the number of spills
since no copies are inserted so the split intervals are *connected* through
spill and reloads (or rematerialization). The newly created intervals can be
spilled again, in that case, since it does not span multiple basic blocks, it's
spilled in the usual manner. However, it can reuse the same stack slot as the
previously split interval.
This is currently controlled by -split-intervals-at-bb.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44198 91177308-0d34-0410-b5e6-96231b3b80d8
is disabled in the sense that it will refuse to create one from a UDiv
instruction, until the code is better tested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44163 91177308-0d34-0410-b5e6-96231b3b80d8
deserialize objects if BatchReadOwnedPtrs was called more than once in the
same call chain then the second call would overwrite the SerializedPtrIDs
being used by the first call. Solved this problem by making the vector that
holds the pointer IDs local to a function call. Now BatchReadOwnedPtrs is
reentrant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44152 91177308-0d34-0410-b5e6-96231b3b80d8
MachineOperand auxInfo. Previous clunky implementation uses an external map
to track sub-register uses. That works because register allocator uses
a new virtual register for each spilled use. With interval splitting (coming
soon), we may have multiple uses of the same register some of which are
of using different sub-registers from others. It's too fragile to constantly
update the information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44104 91177308-0d34-0410-b5e6-96231b3b80d8
to use different mappings for EH and debug info;
no functional change yet.
Fix warning in X86CodeEmitter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44056 91177308-0d34-0410-b5e6-96231b3b80d8
adjustment fields, and an optional flag. If there is a "dynamic_stackalloc" in
the code, make sure that it's bracketed by CALLSEQ_START and CALLSEQ_END. If
not, then there is the potential for the stack to be changed while the stack's
being used by another instruction (like a call).
This can only result in tears...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44037 91177308-0d34-0410-b5e6-96231b3b80d8
clients of the Deserializer to read the pointer ID before they are ready
to deserialize the object (which can mean registering a pointer reference
with the backpatcher).
Changed some methods that took an argument "SerializedPtrID" to "const SerializedPtrID&" (pass-by-reference). This is to accommodate a future
revision of SerializedPtrID where it may be much fatter than an unsigned
integer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44021 91177308-0d34-0410-b5e6-96231b3b80d8
deserialization as a temporary location for storing serialized pointer identifiers. The
definition of SerializedPtrID will likely change significantly in the future, and the
current implementation caused compilation errors on some 64-bit machines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43983 91177308-0d34-0410-b5e6-96231b3b80d8
serialized block in the bitstream, including a block in an entirely different
nesting than the current block. This is useful for deserializing objects from
a bitstream in an order different from the order that they were serialized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43973 91177308-0d34-0410-b5e6-96231b3b80d8
Moved some of the logic in BitstreamReader::ExitBlock into a utility function
BitstreamReader::PopBlockScope. The latter is a private method. It will also
be called by Deserializer to manipulate the current "block scope."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43972 91177308-0d34-0410-b5e6-96231b3b80d8
apints on big-endian machines if the bitwidth is
not a multiple of 8. Introduce a new helper,
MVT::getStoreSizeInBits, and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43934 91177308-0d34-0410-b5e6-96231b3b80d8
block that is being visited in the bitstream. The client can also now
skip blocks before reading them, and query the current abbreviation number
as seen from the perspective of the Deserializer. This allows the client
to be more interactive in the deserialization process (if they so choose).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43916 91177308-0d34-0410-b5e6-96231b3b80d8
instead of just using "unsigned". This gives us more flexibility in changing
the definition of the handle later, and is more self-documenting.
Added tracking of block stack in the Deserializer. Now clients can query
if they are still within a block using the methods GetCurrentBlockLocation()
and FinishedBlock().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43903 91177308-0d34-0410-b5e6-96231b3b80d8
array of pointers to not allocate a second array to contain the pointer ids.
Fixed bug in the same member function where deserialized pointers were
not being registered with the backpatcher.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43855 91177308-0d34-0410-b5e6-96231b3b80d8
to group the pointer IDs together in the bitstream before their referenced
contents (which will lend itself to more efficient encoding).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43845 91177308-0d34-0410-b5e6-96231b3b80d8
by value. This version prohibits backpatching of pointers, so it
useful when a pointee is always known to be deserialized beforehand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43799 91177308-0d34-0410-b5e6-96231b3b80d8
should only effect x86 when using long double. Now
12/16 bytes are output for long double globals (the
exact amount depends on the alignment). This brings
globals in line with the rest of LLVM: the space
reserved for an object is now always the ABI size.
One tricky point is that only 10 bytes should be
output for long double if it is a field in a packed
struct, which is the reason for the additional
argument to EmitGlobalConstant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43688 91177308-0d34-0410-b5e6-96231b3b80d8
or getTypeSizeInBits as appropriate in ScalarReplAggregates.
The right change to make was not always obvious, so it would
be good to have an sroa guru review this. While there I noticed
some bugs, and fixed them: (1) arrays of x86 long double have
holes due to alignment padding, but this wasn't being spotted
by HasStructPadding (renamed to HasPadding). The same goes
for arrays of oddly sized ints. Vectors also suffer from this,
in fact the problem for vectors is much worse because basic
vector assumptions seem to be broken by vectors of type with
alignment padding. I didn't try to fix any of these vector
problems. (2) The code for extracting smaller integers from
larger ones (in the "int union" case) was wrong on big-endian
machines for integers with size not a multiple of 8, like i1.
Probably this is impossible to hit via llvm-gcc, but I fixed
it anyway while there and added a testcase. I also got rid of
some trailing whitespace and changed a function name which
had an obvious typo in it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43672 91177308-0d34-0410-b5e6-96231b3b80d8
can be eliminated by the allocator is the destination and source targets the
same register. The most common case is when the source and destination registers
are in different class. For example, on x86 mov32to32_ targets GR32_ which
contains a subset of the registers in GR32.
The allocator can do 2 things:
1. Set the preferred allocation for the destination of a copy to that of its source.
2. After allocation is done, change the allocation of a copy destination (if
legal) so the copy can be eliminated.
This eliminates 443 extra moves from 403.gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43662 91177308-0d34-0410-b5e6-96231b3b80d8
the target pointer to be passed by reference. This can result in less
typing, as the object to be deserialized can be inferred from the
argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43647 91177308-0d34-0410-b5e6-96231b3b80d8
memory rather than in a copy of the APFloat. This avoids problems
when the destination is wider than our significand and is cleaner.
Also provide deterministic values in all cases where conversion
fails, namely zero for NaNs and the minimal or maximal value
respectively for underflow or overflow.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43626 91177308-0d34-0410-b5e6-96231b3b80d8
Deserializer.
There were issues with Visual C++ barfing when instantiating
SerializeTrait<T> when "T" was an abstract class AND
SerializeTrait<T>::ReadVal was *never* called:
template <typename T>
struct SerializeTrait {
<SNIP>
static inline T ReadVal(Deserializer& D) { T::ReadVal(D); }
<SNIP>
};
Visual C++ would complain about "T" being an abstract class, even
though ReadVal was never instantiated (although one of the other
member functions were).
Removing this from the trait is not a big deal. It was used hardly
ever, and users who want "read-by-value" deserialization can simply
call the appropriate methods directly instead of relying on
trait-based-dispatch. The trait dispatch for
serialization/deserialization is simply sugar in many cases (like this
one).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43624 91177308-0d34-0410-b5e6-96231b3b80d8
The meaning of getTypeSize was not clear - clarifying it is important
now that we have x86 long double and arbitrary precision integers.
The issue with long double is that it requires 80 bits, and this is
not a multiple of its alignment. This gives a primitive type for
which getTypeSize differed from getABITypeSize. For arbitrary precision
integers it is even worse: there is the minimum number of bits needed to
hold the type (eg: 36 for an i36), the maximum number of bits that will
be overwriten when storing the type (40 bits for i36) and the ABI size
(i.e. the storage size rounded up to a multiple of the alignment; 64 bits
for i36).
This patch removes getTypeSize (not really - it is still there but
deprecated to allow for a gradual transition). Instead there is:
(1) getTypeSizeInBits - a number of bits that suffices to hold all
values of the type. For a primitive type, this is the minimum number
of bits. For an i36 this is 36 bits. For x86 long double it is 80.
This corresponds to gcc's TYPE_PRECISION.
(2) getTypeStoreSizeInBits - the maximum number of bits that is
written when storing the type (or read when reading it). For an
i36 this is 40 bits, for an x86 long double it is 80 bits. This
is the size alias analysis is interested in (getTypeStoreSize
returns the number of bytes). There doesn't seem to be anything
corresponding to this in gcc.
(3) getABITypeSizeInBits - this is getTypeStoreSizeInBits rounded
up to a multiple of the alignment. For an i36 this is 64, for an
x86 long double this is 96 or 128 depending on the OS. This is the
spacing between consecutive elements when you form an array out of
this type (getABITypeSize returns the number of bytes). This is
TYPE_SIZE in gcc.
Since successive elements in a SequentialType (arrays, pointers
and vectors) need to be aligned, the spacing between them will be
given by getABITypeSize. This means that the size of an array
is the length times the getABITypeSize. It also means that GEP
computations need to use getABITypeSize when computing offsets.
Furthermore, if an alloca allocates several elements at once then
these too need to be aligned, so the size of the alloca has to be
the number of elements multiplied by getABITypeSize. Logically
speaking this doesn't have to be the case when allocating just
one element, but it is simpler to also use getABITypeSize in this
case. So alloca's and mallocs should use getABITypeSize. Finally,
since gcc's only notion of size is that given by getABITypeSize, if
you want to output assembler etc the same as gcc then getABITypeSize
is the size you want.
Since a store will overwrite no more than getTypeStoreSize bytes,
and a read will read no more than that many bytes, this is the
notion of size appropriate for alias analysis calculations.
In this patch I have corrected all type size uses except some of
those in ScalarReplAggregates, lib/Codegen, lib/Target (the hard
cases). I will get around to auditing these too at some point,
but I could do with some help.
Finally, I made one change which I think wise but others might
consider pointless and suboptimal: in an unpacked struct the
amount of space allocated for a field is now given by the ABI
size rather than getTypeStoreSize. I did this because every
other place that reserves memory for a type (eg: alloca) now
uses getABITypeSize, and I didn't want to make an exception
for unpacked structs, i.e. I did it to make things more uniform.
This only effects structs containing long doubles and arbitrary
precision integers. If someone wants to pack these types more
tightly they can always use a packed struct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43620 91177308-0d34-0410-b5e6-96231b3b80d8
flag in the **key** of the backpatch map, as opposed to the mapped
value which contains either the final pointer, or a pointer to a chain
of pointers that need to be backpatched. The bit flag was moved to
the key because we were erroneously assuming that the backpatched
pointers would be at an alignment of >= 2 bytes, which obviously
doesn't work for character strings. Now we just steal the bit from the key.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43595 91177308-0d34-0410-b5e6-96231b3b80d8
Added method FindAndConstruct() to DenseMap, which does the same thing as
operator[], except that it refers value_type& (a reference to both the
key and mapped data pair). This method is useful for clients that wish
to access the stored key value, as opposed to the key used to do the
actual lookup (these need not always be the same).
Redefined operator[] to use FindAndConstruct() (same logic).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43594 91177308-0d34-0410-b5e6-96231b3b80d8
just like pointers, except that they cannot be backpatched. This
means that references are essentially non-owning pointers where the
referred object must be deserialized prior to the reference being
deserialized. Because of the nature of references, this ordering of
objects is always possible.
Fixed a bug in backpatching code (returning the backpatched pointer
would accidentally include a bit flag).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43570 91177308-0d34-0410-b5e6-96231b3b80d8
transformation. Previously, it's restricted by ensuring the number of load uses
is one. Now the restriction is loosened up by allowing setcc uses to be
"extended" (e.g. setcc x, c, eq -> setcc sext(x), sext(c), eq).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@43465 91177308-0d34-0410-b5e6-96231b3b80d8