tighter, more strict FileCheck assertions. Some of these I really like
as they show case exactly what instruction sequences come out of these
microscopic functionality tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218936 91177308-0d34-0410-b5e6-96231b3b80d8
baseline for updates from the new vector shuffle lowering.
I've inspected the results here, and I couldn't find any register
allocation decisions where there should be any realistic way to register
allocate things differently. The closest was the imul test case. If you
see something here you'd like register number variables on, just shout
and I'll add them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218935 91177308-0d34-0410-b5e6-96231b3b80d8
need to be updated for the new vector shuffle lowering.
After talking to Adam Nemet, Tim Northover, etc., it seems that testing
MC encodings in the same suite as the basic codegen isn't the right
approach. Instead, we're going to want dedicated MC tests for the
encodings. These encodings are starting to get in my way so I wanted to
cut them out early. The total set of instructions that should have
encoding tests added is:
vpaddd
vsqrtss
vsqrtsd
vmovlhps
vmovhlps
valignq
vbroadcastss
Not too many parts of these tests were even using this. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218932 91177308-0d34-0410-b5e6-96231b3b80d8
Older Book-E cores, such as the PPC 440, support only msync (which has the same
encoding as sync 0), but not any of the other sync forms. Newer Book-E cores,
however, do support sync, and for performance reasons we should allow the use
of the more-general form.
This refactors msync use into its own feature group so that it applies by
default only to older Book-E cores (of the relevant cores, we only have
definitions for the PPC440/450 currently).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218923 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Atomic loads and store of up to the native size (32 bits, or 64 for PPC64)
can be lowered to a simple load or store instruction (as the synchronization
is already handled by AtomicExpand, and the atomicity is guaranteed thanks to
the alignment requirements of atomic accesses). This is exactly what this patch
does. Previously, these were implemented by complex
load-linked/store-conditional loops.. an obvious performance problem.
For example, this patch turns
```
define void @store_i8_unordered(i8* %mem) {
store atomic i8 42, i8* %mem unordered, align 1
ret void
}
```
from
```
_store_i8_unordered: ; @store_i8_unordered
; BB#0:
rlwinm r2, r3, 3, 27, 28
li r4, 42
xori r5, r2, 24
rlwinm r2, r3, 0, 0, 29
li r3, 255
slw r4, r4, r5
slw r3, r3, r5
and r4, r4, r3
LBB4_1: ; =>This Inner Loop Header: Depth=1
lwarx r5, 0, r2
andc r5, r5, r3
or r5, r4, r5
stwcx. r5, 0, r2
bne cr0, LBB4_1
; BB#2:
blr
```
into
```
_store_i8_unordered: ; @store_i8_unordered
; BB#0:
li r2, 42
stb r2, 0(r3)
blr
```
which looks like a pretty clear win to me.
Test Plan:
fixed the tests + new test for indexed accesses + make check-all
Reviewers: jfb, wschmidt, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5587
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218922 91177308-0d34-0410-b5e6-96231b3b80d8
Do not eliminate the frame pointer if there is a stackmap or patchpoint in the
function. All stackmap references should be FP relative.
This fixes PR21107.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218920 91177308-0d34-0410-b5e6-96231b3b80d8
This patch defines a new iterator for the imported symbols.
Make a change to COFFDumper to use that iterator to print
out imported symbols and its ordinals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218915 91177308-0d34-0410-b5e6-96231b3b80d8
This patch addresses the first stage of PR17891 by folding constant
arguments together into a single MDString. Integers are stringified and
a `\0` character is used as a separator.
Part of PR17891.
Note: I've attached my testcases upgrade scripts to the PR. If I've
just broken your out-of-tree testcases, they might help.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218914 91177308-0d34-0410-b5e6-96231b3b80d8
elements as well as integer elements in order to form simpler shuffle
patterns.
This is the primary reason why we were failing to match some of the
2-and-2 floating point shuffles such as PR21140. Even after fixing this
we need to support some extra patterns in the backend in order to match
the resulting X86ISD::UNPCKL nodes into the correct instructions. This
commit should fix PR21140 and includes more comprehensive testing of
insertion patterns in v4 shuffles.
Not all of the added tests are beautiful. For example, we don't have
clever instructions to insert-via-load in the integer domain. There are
also some places where we aren't sufficiently cunning with our use of
movq and movd, but that's future work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218911 91177308-0d34-0410-b5e6-96231b3b80d8
When unsafe-fp-math is enabled, we can turn sqrt(X) * sqrt(X) into X.
This can happen in the real world when calculating x ** 3/2. This occurs
in test-suite/SingleSource/Benchmarks/BenchmarkGame/n-body.c.
Differential Revision: http://reviews.llvm.org/D5584
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218906 91177308-0d34-0410-b5e6-96231b3b80d8
floating point and integer domains.
Merge the AVX2 test into it and add an extra RUN line. Generate clean
FileCheck statements with my script. Remove the now merged AVX2 tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218903 91177308-0d34-0410-b5e6-96231b3b80d8
When the flag is given, the command prints out the COFF import table.
Currently only the import table directory will be printed.
I'm going to make another patch to print out the imported symbols.
The implementation of import directory entry iterator in
COFFObjectFile.cpp was buggy. This patch fixes that too.
http://reviews.llvm.org/D5569
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218891 91177308-0d34-0410-b5e6-96231b3b80d8
My commit rL216160 introduced a bug PR21014: IndVars widens code 'for (i = ; i < ...; i++) arr[ CONST - i]' into 'for (i = ; i < ...; i++) arr[ i - CONST]'
thus inverting index expression. This patch fixes it.
Thanks to Jörg Sonnenberger for pointing.
Differential Revision: http://reviews.llvm.org/D5576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218867 91177308-0d34-0410-b5e6-96231b3b80d8
This file isn't really doing anything useful. Many of the tests that
seem to be combined are also repeats from other test files. Many of the
other tests, despite the comment that they should be combined into
a single shuffle... well... aren't combined into a single shuffle.
=/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218862 91177308-0d34-0410-b5e6-96231b3b80d8
least seem *slightly* more interesting test wise, although given how
spotily we actually combine anything, I remain somewhat suspicious.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218861 91177308-0d34-0410-b5e6-96231b3b80d8
checks for all the ISA variants.
If the SSE2 checks here terrify you, good. This is (in large part) the
kind of amazingly bad code that is holding LLVM back when vectorizing on
older ISAs.
At the same time, these tests seem increasingly dubious to me. There are
a very large number of tests and it isn't clear that they are
systematically covering a specific set of functionality. Anyways,
I don't want to reduce testing during the transition, I just want to
consolidate it to where it is easier to manage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218860 91177308-0d34-0410-b5e6-96231b3b80d8
file.
Some of these really don't make sense to test -- we're testing for the
*lack* of combining two shuffles into one, presumably because the two
would generate better shuffles in the end. But if you look at the
generated code shown here, in many cases the generated code is, frankly,
terrible. Or we combine any two generated shuffles back into a single
instruction! I've left a FIXME to revisit these decisions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218859 91177308-0d34-0410-b5e6-96231b3b80d8
and use the new grouped FileCheck patterns to match them.
No interesting changes yet, but this test is now in proper form to have
the other shuffle combining tests merged into it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218857 91177308-0d34-0410-b5e6-96231b3b80d8
The test has to do with DAG combines, and so it doesn't need the new
vector shuffle lowering to be effective. Also, it has a nice in-IR
triple string which we should really be using rather than command line
flags (unless it varies form RUN-line to RUN-line). Finally, I much
prefer letting LLVM synthesize the correct datalayout string from the
triple rather than baking one in here that will just become stale.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218856 91177308-0d34-0410-b5e6-96231b3b80d8
generic DAG combining of shuffles relevant to x86.
My plan is to fold a bunch of the other DAG combining test cases into
this one, while converting them to use the nice new FileCheck assertion
syntax.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218855 91177308-0d34-0410-b5e6-96231b3b80d8
a bare-metal triple and have nice BB labels, etc.
No significant change here, just tidying up to have a consistent set of
OS-agnostic vector functionality here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218854 91177308-0d34-0410-b5e6-96231b3b80d8
matching and lowering 64-bit insertions.
The first problem was that we weren't looking through bitcasts to
discover that we *could* lower as insertions. Once fixed, we in turn
weren't looking through bitcasts to discover that we could fold a load
into the lowering. Once fixed, we weren't forming a SCALAR_TO_VECTOR
node around the inserted element and instead were passing a scalar to
a DAG node that expected a vector. It turns out there are some patterns
that will "lower" this into the correct asm, but the rest of the X86
backend is very unhappy with such antics.
This should fix a few more edge case regressions I've spotted going
through the regression test suite to enable the new vector shuffle
lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218839 91177308-0d34-0410-b5e6-96231b3b80d8
test file.
This old test had a bunch of functions that were never even checked. =/
The only thing it really did was to make sure that we did something
reasonable in 32-bit mode with SSE4.1. Adding another run line to the
main vector-sext.ll test seems a better way to do that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218810 91177308-0d34-0410-b5e6-96231b3b80d8
of architectures: SSE2, SSSE3, SSE4.1, AVX, and AVX2.
Unfortunately, this exposses the absolute horror of the code we generate
for many of these patterns. Anyone wanting to familiarize themselves
with the x86 backend and improve performance could do a lot of good
sitting down and making these test cases not look so terrible. While the
new vector shuffle code I'm working on well help some, it won't fix all
of the crimes here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218807 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed here:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20140609/220598.html
And again here:
http://lists.cs.uiuc.edu/pipermail/llvmdev/2014-September/077168.html
The sqrt of a negative number when using the llvm intrinsic is undefined.
We should return undef rather than 0.0 to match the definition in the LLVM IR lang ref.
This change should not affect any code that isn't using "no-nans-fp-math";
ie, no-nans is a requirement for generating the llvm intrinsic in place of a sqrt function call.
Unfortunately, the behavior introduced by this patch will not match current gcc, xlc, icc, and
possibly other compilers. The current clang/llvm behavior of returning 0.0 doesn't either.
We knowingly approve of this difference with the other compilers in an attempt to flag code
that is invoking undefined behavior.
A front-end warning should also try to convince the user that the program will fail:
http://llvm.org/bugs/show_bug.cgi?id=21093
Differential Revision: http://reviews.llvm.org/D5527
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218803 91177308-0d34-0410-b5e6-96231b3b80d8
These tests are far and away the best sext and zext tests we have for
vectors. I'm going to merge the other similar tests into them and expand
the ISA coverage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218800 91177308-0d34-0410-b5e6-96231b3b80d8
script to make them nice and predictable. This will ease updating them
for the new vector shuffle lowering and seeing the delta if any.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218795 91177308-0d34-0410-b5e6-96231b3b80d8
avx-sext.ll using my new script.
Also add an AVX2 mode to this test.
Part of cleaning up the test suite before enabling the new vector
shuffle lowering. This also highlights some of the abysmal failures of
the old shuffle lowering. Check out those 'pinsrw' and 'pextrw'
sequences!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218794 91177308-0d34-0410-b5e6-96231b3b80d8
As with x86 and AArch64, certain situations can arise where we need to spill
CPSR in the middle of a calculation. These should be avoided where possible
(MRS/MSR is rather expensive), which ARM is actually better at than the other
two since it tries to Glue defs to uses, but as a last ditch effort, copying is
better than crashing.
rdar://problem/18011155
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218789 91177308-0d34-0410-b5e6-96231b3b80d8
argument of the llvm.dbg.declare/llvm.dbg.value intrinsics.
Previously, DIVariable was a variable-length field that has an optional
reference to a Metadata array consisting of a variable number of
complex address expressions. In the case of OpPiece expressions this is
wasting a lot of storage in IR, because when an aggregate type is, e.g.,
SROA'd into all of its n individual members, the IR will contain n copies
of the DIVariable, all alike, only differing in the complex address
reference at the end.
By making the complex address into an extra argument of the
dbg.value/dbg.declare intrinsics, all of the pieces can reference the
same variable and the complex address expressions can be uniqued across
the CU, too.
Down the road, this will allow us to move other flags, such as
"indirection" out of the DIVariable, too.
The new intrinsics look like this:
declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr)
declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr)
This patch adds a new LLVM-local tag to DIExpressions, so we can detect
and pretty-print DIExpression metadata nodes.
What this patch doesn't do:
This patch does not touch the "Indirect" field in DIVariable; but moving
that into the expression would be a natural next step.
http://reviews.llvm.org/D4919
rdar://problem/17994491
Thanks to dblaikie and dexonsmith for reviewing this patch!
Note: I accidentally committed a bogus older version of this patch previously.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218787 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Implement conversion of 64 to 32 bit floating point numbers (fptrunc) in mips fast-isel
Test Plan:
fptrunc.ll
checked also with 4 internal mips build bot flavors mip32r1/miprs32r2 and at -O0 and -O2
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: rfuhler
Differential Revision: http://reviews.llvm.org/D5553
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218785 91177308-0d34-0410-b5e6-96231b3b80d8
r206400 and r209442 added remarks that are disabled by default.
However, if a diagnostic handler is registered, the remarks are sent
unfiltered to the handler. This is the right behaviour for clang, since
it has its own filters.
However, the diagnostic handler exposed in the LTO API receives only the
severity and message. It doesn't have the information to filter by pass
name. For LTO, disabled remarks should be filtered by the producer.
I've changed `LLVMContext::setDiagnosticHandler()` to take a `bool`
argument indicating whether to respect the built-in filters. This
defaults to `false`, so other consumers don't have a behaviour change,
but `LTOCodeGenerator::setDiagnosticHandler()` sets it to `true`.
To make this behaviour testable, I added a `-use-diagnostic-handler`
command-line option to `llvm-lto`.
This fixes PR21108.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@218784 91177308-0d34-0410-b5e6-96231b3b80d8
