if ((x & C) == 0) x |= C becomes x |= C
if ((x & C) != 0) x ^= C becomes x &= ~C
if ((x & C) == 0) x ^= C becomes x |= C
if ((x & C) != 0) x &= ~C becomes x &= ~C
if ((x & C) == 0) x &= ~C becomes nothing
Differential Revision: http://reviews.llvm.org/D3777
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210006 91177308-0d34-0410-b5e6-96231b3b80d8
Amend r210001 to use the classic fallback order behaviour if the requested
graphing program isn't found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210003 91177308-0d34-0410-b5e6-96231b3b80d8
Replace the crufty build-time configure checks for program paths with
equivalent runtime logic.
This lets users install graphing tools as needed without having to reconfigure
and rebuild LLVM, while eliminating a long chain of inappropriate compile
dependencies that included GUI programs and the windowing system.
Additional features:
* Support the OS X 'open' command to view graphs generated by any of the
Graphviz utilities. This is an alternative to the Graphviz OS X UI which is
no longer available on Mountain Lion.
* Produce informative log output upon failure to indicate which programs can
be installed to view graphs.
Ping me if this doesn't work for your particular environment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210001 91177308-0d34-0410-b5e6-96231b3b80d8
Since we cannot yet use variadic templates, add a specialisation for
6-parameters to format. This is motivated by a need for the additional
parameter for formatting information for an unwind decoder for Windows on ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209999 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce the support structures necessary to deal with the Windows ARM EH data.
These definitions are extremely aggressive about assertions to aid future use
for generation of the entries and subsequent decoding.
The names for the various fields are meant to reflect the names used by the
Visual Studio toolchain to aid communication.
Due to the complexity in reading a few of the values, there are a couple of
additional utility functions to decode the information.
In general, there are two ways to encode the unwinding information:
- packed, which places the data inline into the
_IMAGE_ARM_RUNTIME_FUNCTION_ENTRY structure.
- unpacked, which places the data into auxiliary structures placed into the
.xdata section.
The set of structures allow reading of data in either encoding, with the minor
caveat that epilogue scopes need to be decoded manually by constructing the
structure from the data returned by the RuntimeFunction structure.
These definitions are meant for read-only access at the current point as the
first use of them will be to decode the exception information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209998 91177308-0d34-0410-b5e6-96231b3b80d8
This patch updates IntelJITEventListener.cpp to account for revision 206654, which removed some methods from DILineInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209989 91177308-0d34-0410-b5e6-96231b3b80d8
This was previously committed in r209680 and reverted in r209683 after
it caused sanitizer builds to crash.
The issue seems to be that the DebugLoc associated with dbg.value IR
intrinsics isn't necessarily accurate. Instead, we duplicate the
DIVariables and add an InlinedAt field to them to record their
location.
We were using this InlinedAt field to compute the LexicalScope for the
variable, but not using it in the abstract DbgVariable construction and
mapping. This resulted in a formal parameter to the current concrete
function, correctly having no InlinedAt information, but incorrectly
having a DebugLoc that described an inlined location within the
function... thus an abstract DbgVariable was created for the variable,
but its DIE was never constructed (since the LexicalScope had no such
variable). This DbgVariable was silently ignored (by testing for a
non-null DIE on the abstract DbgVariable).
So, fix this by using the right scoping information when constructing
abstract DbgVariables.
In the long run, I suspect we want to undo the work that added this
second kind of location tracking and fix the places where the DebugLoc
propagation on the dbg.value intrinsic fails. This will shrink debug
info (by not duplicating DIVariables), make it more efficient (by not
having to construct new DIVariable metadata nodes to try to map back to
a single variable), and benefit all instructions.
But perhaps there are insurmountable issues with DebugLoc quality that
I'm unaware of... I just don't know how we can't /just keep the DebugLoc
from the dbg.declare to the dbg.values and never get this wrong/.
Some history context:
http://llvm.org/viewvc/llvm-project?view=revision&revision=135629http://llvm.org/viewvc/llvm-project?view=revision&revision=137253
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209984 91177308-0d34-0410-b5e6-96231b3b80d8
DAG cycle detection is only enabled with ENABLE_EXPENSIVE_CHECKS. However we
can run it just before we would crash in order to provide more informative
diagnostics.
Now in addition to the "Overran sorted position" message we also get the Node
printed if a cycle was detected.
Tested by building several configs: Debug+Assert, Debug+Assert+Check (this is
ENABLE_EXPENSIVE_CHECKS), Release+Assert and Release. Also tried that the
AssignTopologicalOrder assert produces the expected results.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209977 91177308-0d34-0410-b5e6-96231b3b80d8
Pass the DAG down to checkForCycles from all callers where we have it. This
allows target-specific nodes to be printed properly.
Also print some missing newlines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209976 91177308-0d34-0410-b5e6-96231b3b80d8
Prefer the decl in SelectionDAGNodes.h because it's used there and
SelectionDAG.h includes SelectionDAGNodes.h.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209975 91177308-0d34-0410-b5e6-96231b3b80d8
Handle "X + ~X" -> "-1" in the function Value *Reassociate::OptimizeAdd(Instruction *I, SmallVectorImpl<ValueEntry> &Ops);
This patch implements:
TODO: We could handle "X + ~X" -> "-1" if we wanted, since "-X = ~X+1".
Patch by Rahul Jain!
Differential Revision: http://reviews.llvm.org/D3835
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209973 91177308-0d34-0410-b5e6-96231b3b80d8
Input YAML file might contain multiple object file definitions.
New option `-docnum` allows to specify an ordinal number (starting from 1)
of definition used for an object file generation.
Patch reviewed by Sean Silva.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209967 91177308-0d34-0410-b5e6-96231b3b80d8
There is no std::error_code::success, so this removes much of the noise
in transitioning to std::error_code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209952 91177308-0d34-0410-b5e6-96231b3b80d8
Following the lead set by r209324, I'm making these tests match the whole
instruction, so we can be sure we're lowering them correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209947 91177308-0d34-0410-b5e6-96231b3b80d8
This patch teaches the backend how to simplify/canonicalize dag node
sequences normally introduced by the backend when promoting certain dag nodes
with illegal vector type.
This patch adds two new combine rules:
1) fold (shuffle (bitcast (BINOP A, B)), Undef, <Mask>) ->
(shuffle (BINOP (bitcast A), (bitcast B)), Undef, <Mask>)
2) fold (BINOP (shuffle (A, Undef, <Mask>)), (shuffle (B, Undef, <Mask>))) ->
(shuffle (BINOP A, B), Undef, <Mask>).
Both rules are only triggered on the type-legalized DAG.
In particular, rule 1. is a target specific combine rule that attempts
to sink a bitconvert into the operands of a binary operation.
Rule 2. is a target independet rule that attempts to move a shuffle
immediately after a binary operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209930 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If both vector args to vselect are concat_vectors and the condition is
constant and picks half a vector from each argument, convert the vselect
into a concat_vectors.
Added a test.
The ConvertSelectToConcatVector is assuming it doesn't get vselects with
arguments of, for example, <undef, undef, true, true>. Those get taken
care of in the checks above its call.
Reviewers: nadav, delena, grosbach, hfinkel
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3916
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209929 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Separate the check for blend shuffle_vector masks into isBlendMask.
This function will also be used to check if a vector shuffle is legal. No
change in functionality was intended, but we ended up improving codegen on
two tests, which were being (more) optimized only if the resulting shuffle
was legal.
Reviewers: nadav, delena, andreadb
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D3964
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209923 91177308-0d34-0410-b5e6-96231b3b80d8
This helps more branches into selects. On R600,
vectors are cheap and anything that helps
remove branches is very good.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209914 91177308-0d34-0410-b5e6-96231b3b80d8
For MIPS, we have to encode the personality routine with
an indirect pointer to absptr; otherwise, some link warning
warning will be raised, and the program might crash in some
early MIPS Android device.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209907 91177308-0d34-0410-b5e6-96231b3b80d8
Unordered is strictly weaker than monotonic, so if the latter doesn't have any
barriers then the former certainly shouldn't.
rdar://problem/16548260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209901 91177308-0d34-0410-b5e6-96231b3b80d8
