PPCInstrInfo::insertSelect and PPCInstrInfo::canInsertSelect were computing the
common subclass of the true and false inputs, and then selecting either the
32-bit or the 64-bit isel variant based on the result of calling
PPC::GPRCRegClass.hasSubClassEq(RC) and PPC::G8RCRegClass.hasSubClassEq(RC)
(where RC is the common subclass). Unfortunately, this is not quite right: if
we have something like this:
%vreg8<def> = SELECT_CC_I8 %vreg4<kill>, %vreg7<kill>, %vreg6<kill>, 76;
G8RC_and_G8RC_NOX0:%vreg8 CRRC:%vreg4 G8RC_NOX0:%vreg7,%vreg6
then the common subclass of G8RC_and_G8RC_NOX0 and G8RC_NOX0 is G8RC_NOX0, and
G8RC_NOX0 is not a subclass of G8RC (because it also contains the ZERO8
pseudo-register). As a result, we also need to check the common subclass
against GPRC_NOR0 and G8RC_NOX0 explicitly.
This had not been a problem for clients of insertSelect that called
canInsertSelect first (because it had a compensating mistake), but insertSelect
is also used by the PPC pseudo-instruction expander, and this error was causing
a problem in that context.
This problem was found by csmith.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186343 91177308-0d34-0410-b5e6-96231b3b80d8
There is a comment at the top of DAGTypeLegalizer::PerformExpensiveChecks
which, in part, says:
// Note that these invariants may not hold momentarily when processing a node:
// the node being processed may be put in a map before being marked Processed.
Unfortunately, this assert would be valid only if the above-mentioned invariant
held unconditionally. This was causing llc to assert when, in fact,
everything was fine.
Thanks to Richard Sandiford for investigating this issue!
Fixes PR16562.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186338 91177308-0d34-0410-b5e6-96231b3b80d8
a bot.
This reverts the commit which introduced a new implementation of the
fancy SROA pass designed to reduce its overhead. I'll skip the huge
commit log here, refer to r186316 if you're looking for how this all
works and why it works that way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186332 91177308-0d34-0410-b5e6-96231b3b80d8
Joerg Sonnenberger tells me one can open a directory in freebsd. I will try
to centralize our calls to open so that we can handle O_BINARY in one place,
and will then handle this there too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186317 91177308-0d34-0410-b5e6-96231b3b80d8
different core implementation strategy.
Previously, SROA would build a relatively elaborate partitioning of an
alloca, associate uses with each partition, and then rewrite the uses of
each partition in an attempt to break apart the alloca into chunks that
could be promoted. This was very wasteful in terms of memory and compile
time because regardless of how complex the alloca or how much we're able
to do in breaking it up, all of the datastructure work to analyze the
partitioning was done up front.
The new implementation attempts to form partitions of the alloca lazily
and on the fly, rewriting the uses that make up that partition as it
goes. This has a few significant effects:
1) Much simpler data structures are used throughout.
2) No more double walk of the recursive use graph of the alloca, only
walk it once.
3) No more complex algorithms for associating a particular use with
a particular partition.
4) PHI and Select speculation is simplified and happens lazily.
5) More precise information is available about a specific use of the
alloca, removing the need for some side datastructures.
Ultimately, I think this is a much better implementation. It removes
about 300 lines of code, but arguably removes more like 500 considering
that some code grew in the process of being factored apart and cleaned
up for this all to work.
I've re-used as much of the old implementation as possible, which
includes the lion's share of code in the form of the rewriting logic.
The interesting new logic centers around how the uses of a partition are
sorted, and split into actual partitions.
Each instruction using a pointer derived from the alloca gets
a 'Partition' entry. This name is totally wrong, but I'll do a rename in
a follow-up commit as there is already enough churn here. The entry
describes the offset range accessed and the nature of the access. Once
we have all of these entries we sort them in a very specific way:
increasing order of begin offset, followed by whether they are
splittable uses (memcpy, etc), followed by the end offset or whatever.
Sorting by splittability is important as it simplifies the collection of
uses into a partition.
Once we have these uses sorted, we walk from the beginning to the end
building up a range of uses that form a partition of the alloca.
Overlapping unsplittable uses are merged into a single partition while
splittable uses are broken apart and carried from one partition to the
next. A partition is also introduced to bridge splittable uses between
the unsplittable regions when necessary.
I've looked at the performance PRs fairly closely. PR15471 no longer
will even load (the module is invalid). Not sure what is up there.
PR15412 improves by between 5% and 10%, however it is nearly impossible
to know what is holding it up as SROA (the entire pass) takes less time
than reading the IR for that test case. The analysis takes the same time
as running mem2reg on the final allocas. I suspect (without much
evidence) that the new implementation will scale much better however,
and it is just the small nature of the test cases that makes the changes
small and noisy. Either way, it is still simpler and cleaner I think.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186316 91177308-0d34-0410-b5e6-96231b3b80d8
is executed within the same second as the inputs for the test are
checked out from the source tree, it will fail to update due to being
below the resolution of the 'mtime' test used.
Now, this may seem improbably to you... ok, maybe *really* improbable,
but consider a system which does distributed execution of tests by
shipping their inputs to another machine and runs them. That might cause
the mtime to be quite recent during the test run. ;]
Instead, create two files directly in the test (allowing all platforms
to see the problem) and add either a use of the 'touch' command that
forces one mtime to some time quite a bit in the past, or it sleeps for
just over a second to be outside of the precision window.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186282 91177308-0d34-0410-b5e6-96231b3b80d8
This update was done with the following bash script:
find test/CodeGen -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc.*debug" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP
done
sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP
sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP
sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP
sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186280 91177308-0d34-0410-b5e6-96231b3b80d8
This conversion was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)define\([^@]*\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3define\4@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186269 91177308-0d34-0410-b5e6-96231b3b80d8
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186268 91177308-0d34-0410-b5e6-96231b3b80d8
This was done with the following sed invocation to catch label lines demarking function boundaries:
sed -i '' "s/^;\( *\)\([A-Z0-9_]*\):\( *\)test\([A-Za-z0-9_-]*\):\( *\)$/;\1\2-LABEL:\3test\4:\5/g" test/CodeGen/*/*.ll
which was written conservatively to avoid false positives rather than false negatives. I scanned through all the changes and everything looks correct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186258 91177308-0d34-0410-b5e6-96231b3b80d8
If an outside loop user of the reduction value uses the header phi node we
cannot just reduce the vectorized phi value in the vector code epilog because
we would loose VF-1 reductions.
lp:
p = phi (0, lv)
lv = lv + 1
...
brcond , lp, outside
outside:
usr = add 0, p
(Say the loop iterates two times, the value of p coming out of the loop is one).
We cannot just transform this to:
vlp:
p = phi (<0,0>, lv)
lv = lv + <1,1>
..
brcond , lp, outside
outside:
p_reduced = p[0] + [1];
usr = add 0, p_reduced
(Because the original loop iterated two times the vectorized loop would iterate
one time, but p_reduced ends up being zero instead of one).
We would have to execute VF-1 iterations in the scalar remainder loop in such
cases. For now, just disable vectorization.
PR16522
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186256 91177308-0d34-0410-b5e6-96231b3b80d8
In general, one should always complete CFG modifications first, update
CFG-based analyses, like Dominatores and LoopInfo, then generate
instruction sequences.
LoopVectorizer was creating a new loop, calling SCEVExpander to
generate checks, then updating LoopInfo. I just changed the order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186241 91177308-0d34-0410-b5e6-96231b3b80d8
ARM paired GPR COPY was being lowered to two MOVr without CC. This
patch puts the CC back.
My test is a reduction of the case where I encountered the issue,
64-bit atomics use paired GPRs.
The issue only occurs with selectionDAG, FastISel doesn't encounter it
so I didn't bother calling it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186226 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes two bugs is lib/Object that the use in llvm-ar found:
* In OS X created archives, the name can be padded with nulls. Strip them.
* In the constructor, remember the first non special member and use that in
begin_children. This makes sure we skip all special members, not just the
first one.
The change to llvm-ar itself consist of
* Using lib/Object for reading archives instead of ArchiveReader.cpp.
* Writing the modified archive directly, instead of creating an in memory
representation.
The old Archive library was way more general than what is needed, as can
be seen by the diffstat of this patch.
Having llvm-ar using lib/Object now opens the way for creating regular symbol
tables for both native objects and bitcode files so that we can use those
archives for LTO.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186197 91177308-0d34-0410-b5e6-96231b3b80d8
I'm guessing the failure had something to do with the double precision
floating point constant used in the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186191 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes a 35% degradation compared to unvectorized code in
MiBench/automotive-susan and an equally serious regression on a private
image processing benchmark.
radar://14351991
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186188 91177308-0d34-0410-b5e6-96231b3b80d8
In particular:
movsbw %al, %ax --> cbtw
movswl %ax, %eax --> cwtl
movslq %eax, %rax --> cltq
According to Intel's manual those have the same performance characteristics but
come with a smaller encoding.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186174 91177308-0d34-0410-b5e6-96231b3b80d8
CHECK-LABEL is meant to be used in place on CHECK on lines containing identifiers or other unique labels (they need not actually be labels in the source or output language, though.) This is used to break up the input stream into separate blocks delineated by CHECK-LABEL lines, each of which is checked independently. This greatly improves the accuracy of errors and fix-it hints in many cases, and allows for FileCheck to recover from errors in one block by continuing to subsequent blocks.
Some tests will be converted to use this new directive in forthcoming patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186162 91177308-0d34-0410-b5e6-96231b3b80d8
against a constant."
This reverts commit r186107. It didn't handle wrapping arithmetic in the
loop correctly and thus caused the following C program to count from
0 to UINT64_MAX instead of from 0 to 255 as intended:
#include <stdio.h>
int main() {
unsigned char first = 0, last = 255;
do { printf("%d\n", first); } while (first++ != last);
}
Full test case and instructions to reproduce with just the -indvars pass
sent to the original review thread rather than to r186107's commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186152 91177308-0d34-0410-b5e6-96231b3b80d8
Normal (sext (setcc ...)) sequences are optimised into
(select_cc ..., -1, 0) by DAGCombiner::visitSIGN_EXTEND.
However, this is deliberately not done for vectors, and after
vector type legalization we have (sext_inreg (setcc ...)) instead.
I wondered about trying to extend DAGCombiner to handle this case too,
but it seemed to be a loss on some other targets I tried, even those for
which SETCC isn't "legal" and SELECT_CC is.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186149 91177308-0d34-0410-b5e6-96231b3b80d8
If the source of these instructions is spilled we should load the destination.
If the destination is spilled we should store the source.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186147 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds explicit calling convention types for the Win64 and
System V/x86-64 ABIs. This allows code to override the default, and use
the Win64 convention on a target that wants to use SysV (and
vice-versa). This is needed to implement the `ms_abi` and `sysv_abi` GNU
attributes.
Reviewers:
CC:
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186144 91177308-0d34-0410-b5e6-96231b3b80d8
Before we could vectorize PHINodes scanning successors was a good way of finding candidates. Now we can vectorize the phinodes which is simpler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186139 91177308-0d34-0410-b5e6-96231b3b80d8
We had patterns to match v4i32 immAllZerosV -> V_SET0, but not patterns for
v8i16 (which occurs in the test case) or v16i8. The same was true for
V_SETALLONES (so I added the associated patterns for those as well).
Another bug found by llvm-stress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186108 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Michele Scandale!
Adds a special handling of the case where, during the loop exit
condition rewriting, the exit value is a constant of bitwidth lower
than the type of the induction variable: instead of introducing a
trunc operation in order to match correctly the operand types, it
allows to convert the constant value to an equivalent constant,
depending on the initial value of the induction variable and the trip
count, in order have an equivalent comparison between the induction
variable and the new constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186107 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a bug (found by csmith) at -O0 where we attempt to create a RLWIMI
with an out-of-range operand. Most uses of the isRunOfOnes function are guarded
by a condition that the value is not zero. This was not true in two places, and
in both places a zero input would result in an out-of-rage MB value (= 32).
To fix this, isRunOfOnes returns false on a zero input (and I've remove one
now-redundant guard).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186101 91177308-0d34-0410-b5e6-96231b3b80d8
We can vectorize them because in the case where we wrap in the address space the
unvectorized code would have had to access a pointer value of zero which is
undefined behavior in address space zero according to the LLVM IR semantics.
(Thank you Duncan, for pointing this out to me).
Fixes PR16592.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186088 91177308-0d34-0410-b5e6-96231b3b80d8
RISBG can handle some ANDs for which no AND IMMEDIATE exists.
It also acts as a three-operand AND for some cases where an
AND IMMEDIATE could be used instead.
It might be worth adding a pass to replace RISBG with AND IMMEDIATE
in cases where the register operands end up being the same and where
AND IMMEDIATE is smaller.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186072 91177308-0d34-0410-b5e6-96231b3b80d8
RISBG has three 8-bit operands (I3, I4 and I5). I'd originally
restricted all three to 6 bits, since that's the only range we intended
to use at the time. However, the top bit of I4 acts as a "zero" flag for
RISBG, while the top bit of I3 acts as a "test" flag for RNSBG & co.
This patch therefore allows them to have the full 8-bit range.
I've left the fifth operand as a 6-bit value for now since the
upper 2 bits have no defined meaning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186070 91177308-0d34-0410-b5e6-96231b3b80d8
predecessors of the two blocks it is attempting to merge supply the
same incoming values to any phi in the successor block. This change
allows merging in the case where there is one or more incoming values
that are undef. The undef values are rewritten to match the non-undef
value that flows from the other edge. Patch by Mark Lacey.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186069 91177308-0d34-0410-b5e6-96231b3b80d8
When computing currently-live registers, the register scavenger excludes undef
uses. As a result, undef uses are ignored when computing the restore points of
registers spilled into the emergency slots. While the register scavenger
normally excludes from consideration, when scavenging, registers used by the
current instruction, we need to not exclude undef uses. Otherwise, we might end
up requiring more emergency spill slots than we have (in the case where the
undef use *is* the currently-spilled register).
Another bug found by llvm-stress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186067 91177308-0d34-0410-b5e6-96231b3b80d8
Without the changes introduced into this patch, if TRE saw any allocas at all,
TRE would not perform TRE *or* mark callsites with the tail marker.
Because TRE runs after mem2reg, this inadequacy is not a death sentence. But
given a callsite A without escaping alloca argument, A may not be able to have
the tail marker placed on it due to a separate callsite B having a write-back
parameter passed in via an argument with the nocapture attribute.
Assume that B is the only other callsite besides A and B only has nocapture
escaping alloca arguments (*NOTE* B may have other arguments that are not passed
allocas). In this case not marking A with the tail marker is unnecessarily
conservative since:
1. By assumption A has no escaping alloca arguments itself so it can not
access the caller's stack via its arguments.
2. Since all of B's escaping alloca arguments are passed as parameters with
the nocapture attribute, we know that B does not stash said escaping
allocas in a manner that outlives B itself and thus could be accessed
indirectly by A.
With the changes introduced by this patch:
1. If we see any escaping allocas passed as a capturing argument, we do
nothing and bail early.
2. If we do not see any escaping allocas passed as captured arguments but we
do see escaping allocas passed as nocapture arguments:
i. We do not perform TRE to avoid PR962 since the code generator produces
significantly worse code for the dynamic allocas that would be created
by the TRE algorithm.
ii. If we do not return twice, mark call sites without escaping allocas
with the tail marker. *NOTE* This excludes functions with escaping
nocapture allocas.
3. If we do not see any escaping allocas at all (whether captured or not):
i. If we do not have usage of setjmp, mark all callsites with the tail
marker.
ii. If there are no dynamic/variable sized allocas in the function,
attempt to perform TRE on all callsites in the function.
Based off of a patch by Nick Lewycky.
rdar://14324281.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186057 91177308-0d34-0410-b5e6-96231b3b80d8
I had thought that these tests could be target-neutral, but in practice this is
not the case (on some targets, like Hexagon and Darwin), they trigger an assert
(a different assert than the one that r186044 fixes).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186051 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason, the Hexagon backend does not reject these invalid static
initializer expressions, but instead crashes in AsmPrinter::EmitGlobalConstant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186045 91177308-0d34-0410-b5e6-96231b3b80d8
A non-constant-foldable static initializer expression containing insertvalue or
extractvalue had been causing an assert:
Constants.cpp:1971: Assertion `FC && "ExtractValue constant expr couldn't be
folded!"' failed.
Now we report a more-sensible "Unsupported expression in static initializer"
error instead.
Fixes PR15417.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186044 91177308-0d34-0410-b5e6-96231b3b80d8
It is not reliable to depend on the output of llvm_unreachable. The original
change will have proper tests when llvm-ar moves to lib/Object (soon).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186043 91177308-0d34-0410-b5e6-96231b3b80d8
There is no lib/Archive anymore and some archive tests were in test/Archive and
others in test/Object. Since archive is just one of the formats supported by
lib/Object, test/Object is probably the best location.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186038 91177308-0d34-0410-b5e6-96231b3b80d8