Pulls out some more code from some of the rather monolithic DWARF
classes. Unlike the address table, the string table won't move up into
DwarfDebug - each DWARF file has its own string table (but there can be
only one address table).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207277 91177308-0d34-0410-b5e6-96231b3b80d8
Consider this use from the new testcase:
LSR Use: Kind=ICmpZero, Offsets={0}, widest fixup type: i32
reg({1000,+,-1}<nw><%for.body>)
-3003 + reg({3,+,3}<nw><%for.body>)
-1001 + reg({1,+,1}<nuw><nsw><%for.body>)
-1000 + reg({0,+,1}<nw><%for.body>)
-3000 + reg({0,+,3}<nuw><%for.body>)
reg({-1000,+,1}<nw><%for.body>)
reg({-3000,+,3}<nsw><%for.body>)
This is the last use we consider for a solution in SolveRecurse, so CurRegs is
a large set. (CurRegs is the set of registers that are needed by the
previously visited uses in the in-progress solution.)
ReqRegs is {
{3,+,3}<nw><%for.body>,
{1,+,1}<nuw><nsw><%for.body>
}
This is the intersection of the regs used by any of the formulas for the
current use and CurRegs.
Now, the code requires a formula to contain *all* these regs (the comment is
simply wrong), otherwise the formula is immediately disqualified. Obviously,
no formula for this use contains two regs so they will all get disqualified.
The fix modifies the check to allow the formula in this case. The idea is
that neither of these formulae is introducing any new registers which is the
point of this early pruning as far as I understand.
In terms of set arithmetic, we now allow formulas whose used regs are a subset
of the required regs not just the other way around.
There are few more loops in the test-suite that are now successfully LSRed. I
have benchmarked those and found very minimal change.
Fixes <rdar://problem/13965777>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207271 91177308-0d34-0410-b5e6-96231b3b80d8
Actually use the `reference` typedef, and remove the private
redefinition of `pointer` since it has no users.
Using `reference` exposes a problem with r207257, which specified the
wrong `value_type` to `iterator_facade_base` (fixed that too).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207270 91177308-0d34-0410-b5e6-96231b3b80d8
buildbot - do not insert debug intrinsics before phi nodes.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207269 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Kostya Serebryany.
unique_ptr would be nice, but it's a bit too much work for an area I'm
not familiar with, nor invested in, unfortunately.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207265 91177308-0d34-0410-b5e6-96231b3b80d8
This should reduce the chance of memory leaks like those fixed in
r207240.
There's still some unclear ownership of DIEs happening in DwarfDebug.
Pushing unique_ptr and references through more APIs should help expose
the cases where ownership is a bit fuzzy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207263 91177308-0d34-0410-b5e6-96231b3b80d8
Makes some more cases (the unit tests, specifically), lexically
compatible with a change to unique_ptr.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207261 91177308-0d34-0410-b5e6-96231b3b80d8
Since this doesn't return ownership (the DIE has been added to the
specified parent already) nor return null, just return by reference.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207259 91177308-0d34-0410-b5e6-96231b3b80d8
Move a lot of the loop-related logic that was sprinkled around the code
into `LoopData`.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207258 91177308-0d34-0410-b5e6-96231b3b80d8
Use the fancy new `iterator_facade_base` to add
`scc_iterator::operator->()`. Remove other definitions where
`iterator_facade_base` does the right thing.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207257 91177308-0d34-0410-b5e6-96231b3b80d8
This'll make changing to unique_ptr ownership of DIEs easier since the
usages will now have '*' on them making them textually compatible
between unique_ptr and raw pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207253 91177308-0d34-0410-b5e6-96231b3b80d8
It's fishy to be changing the `std::vector<>` owned by the iterator, and
no one actual does it, so I'm going to remove the ability in a
subsequent commit. First, update the users.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207252 91177308-0d34-0410-b5e6-96231b3b80d8
These are long functions that really shouldn't be inlined. Otherwise,
no functionality change.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207249 91177308-0d34-0410-b5e6-96231b3b80d8
Functions declared in line in a class are inlined by default. There's
no reason for the `inline` keyword.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207248 91177308-0d34-0410-b5e6-96231b3b80d8
This intrinsic is no longer needed with the new @llvm.arm.hint(i32) intrinsic
which provides a generic, extensible manner for adding hint instructions. This
functionality can now be represented as @llvm.arm.hint(i32 5).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207246 91177308-0d34-0410-b5e6-96231b3b80d8
override the default cold threshold.
When we use command line argument to set the inline threshold, the default
cold threshold will not be used. This is in line with how we use
OptSizeThreshold. When we want a higher threshold for all functions, we
do not have to set both inline threshold and cold threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207245 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce the llvm.arm.hint(i32) intrinsic that can be used to inject hints into
the instruction stream. This is particularly useful for generating IR from a
compiler where the user may inject an intrinsic (e.g. __yield). These are then
pattern substituted into the correct instruction which already existed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207242 91177308-0d34-0410-b5e6-96231b3b80d8
Debug info: Let dbg.values inserted by LowerDbgDeclare inherit the location
of the dbg.value. This gets rid of tons of redundant variable DIEs in
subscopes.
rdar://problem/14874886, rdar://problem/16679936
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207236 91177308-0d34-0410-b5e6-96231b3b80d8
AllocaInst that was missing in one location.
Debug info for optimized code: Support variables that are on the stack and
described by DBG_VALUEs during their lifetime.
Previously, when a variable was at a FrameIndex for any part of its
lifetime, this would shadow all other DBG_VALUEs and only a single
fbreg location would be emitted, which in fact is only valid for a small
range and not the entire lexical scope of the variable. The included
dbg-value-const-byref testcase demonstrates this.
This patch fixes this by
Local
- emitting dbg.value intrinsics for allocas that are passed by reference
- dropping all dbg.declares (they are now fully lowered to dbg.values)
SelectionDAG
- renamed constructors for SDDbgValue for better readability.
- fix UserValue::match() to handle indirect values correctly
- not inserting an MMI table entries for dbg.values that describe allocas.
- lowering dbg.values that describe allocas into *indirect* DBG_VALUEs.
CodeGenPrepare
- leaving dbg.values for an alloca were they are (see comment)
Other
- regenerated/updated instcombine.ll testcase and included source
rdar://problem/16679879
http://reviews.llvm.org/D3374
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207235 91177308-0d34-0410-b5e6-96231b3b80d8
There's no need for local symbols to go through the GOT, in fact it seems GNU ld is not even emitting GOT entries for local symbols and will error out when trying to resolve a GOT relocation for a local symbol.
This bug triggers when bootstrapping clang on AArch64 Linux with -fPIC and the ARM64 backend. The AArch64 backend is not affected.
With this commit it's now possible to bootstrap clang on AArch64 Linux with the ARM64 backend (-fPIC, -O3).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207226 91177308-0d34-0410-b5e6-96231b3b80d8
SCCMap to test for nodes that have been re-added to the root SCC rather
than a set vector. We already have done the SCCMap lookup, we juts need
to test it in two different ways. In turn, do most of the processing of
these nodes as they go into the root SCC rather than lazily. This
simplifies the final loop to just stitch the root SCC into its
children's parent sets. No functionlatiy changed.
However, this makes a few things painfully obvious, which was my intent.
=] There is tons of repeated code introduced here and elsewhere. I'm
splitting the refactoring of that code into helpers from this change so
its clear that this is the change which switches the datastructures used
around, and the other is a pure factoring & deduplication of code
change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207217 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is a supplement of implementing predicate of FP, enabling aarch64 backend
no-fp tests on arm64 target for verification. During this, one bug is exposed and
fixed by this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207215 91177308-0d34-0410-b5e6-96231b3b80d8
remove the nodes in the SCC from the SCC map entirely prior to the DFS
walk. This allows the SCC map to represent both the state of
not-yet-re-added-to-an-SCC and added-back-to-this-SCC independently. The
first is being missing from the SCC map, the second is mapping back to
'this'. In a subsequent commit, I'm going to use this property to
simplify the new node list for this SCC.
In theory, I think this also makes the contract for orphaning a node
from the graph slightly less confusing. Now it is also orphaned from the
SCC graph. Still, this isn't quite right either, and so I'm not adding
test cases here. I'll add test cases for the behavior of orphaning nodes
when the code *actually* supports it. The change here is mostly
incidental, my goal is simplifying the algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207213 91177308-0d34-0410-b5e6-96231b3b80d8
child from the worklist, wait until we actually need to pop another
element off of the worklist and skip over any that were already visited
by the DFS. This also enables swapping the nodes of the SCC into the
worklist. No functionality changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207212 91177308-0d34-0410-b5e6-96231b3b80d8
thing, just mucking up the code. I feel bad that I even wrote this loop.
Very sorry. The diff is huge because of the indent change, but I promise
all this is doing is realizing that the outer two loops were actually
the exact same loops, and we didn't need two of them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207202 91177308-0d34-0410-b5e6-96231b3b80d8
factored into a more reasonable form, replace the tail call with
a simple outer-loop continuation. It's sad that C++ makes this so
awkward to write, but it seems more direct and clear than the tail call
at this point.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207201 91177308-0d34-0410-b5e6-96231b3b80d8
Change the object streamer selection to a switch from a series of if conditions.
Rather than defaulting to ELF, require that an ELF format is requested. The
Windows/!ELF is maintained as MachO would have been selected first and will
still provide a MachO format. Add an assertion that if COFF is requested that
the target platform is Windows as only WinCOFF object emission is currently
supported.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207200 91177308-0d34-0410-b5e6-96231b3b80d8
The returnvalue was handled as c_char_p which ment that ctypes
handled it as a NUL-terminated string making it cut the contents
at first NUL (or even worse - overrunning the buffer if it doesn't
contain a NUL).
Differential Revision: http://reviews.llvm.org/D3474
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207199 91177308-0d34-0410-b5e6-96231b3b80d8
Remove the concepts of "forward" and "general" mass distributions, which
was wrong. The split might have made sense in an early version of the
algorithm, but it's definitely wrong now.
<rdar://problem/14292693>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207195 91177308-0d34-0410-b5e6-96231b3b80d8
