integer promotion analogous to vector promotion. When there is an
integer alloca being accessed both as its integer type and as a narrower
integer type, promote the narrower access to "insert" and "extract" the
smaller integer from the larger one, and make the integer alloca
a candidate for promotion.
In the new formulation, we don't care about target legal integer or use
thresholds to control things. Instead, we only perform this promotion to
an integer type which the frontend has already emitted a load or store
for. This bounds the scope and prevents optimization passes from
coalescing larger and larger entities into a single integer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164479 91177308-0d34-0410-b5e6-96231b3b80d8
across the uses of the alloca. It's entirely possible for negative
numbers to come up here, and in some rare cases simply doing the 2's
complement arithmetic isn't the correct decision. Notably, we can't zext
the index of the GEP. The definition of GEP is that these offsets are
sign extended or truncated to the size of the pointer, and then wrapping
2's complement arithmetic used.
This patch fixes an issue that comes up with *no* input from the
buildbots or bootstrap afaict. The only place where it manifested,
disturbingly, is Clang's own regression test suite. A reduced and
targeted collection of tests are added to cope with this. Note that I've
tried to pin down the potential cases of overflow, but may have missed
some cases. I've tried to add a few cases to test this, but its hard
because LLVM has quite limited support for >64bit constructs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164475 91177308-0d34-0410-b5e6-96231b3b80d8
selects with a constant condition. This resulted in the operands
remaining live through the SROA rewriter. Most of the time, this just
caused some dead allocas to persist and get zapped by later passes, but
in one case found by Joerg, it caused a crash when we tried to *promote*
the alloca despite it having this dead use. We already have the
mechanisms in place to handle this, just wire select up to them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164427 91177308-0d34-0410-b5e6-96231b3b80d8
We rely on it when doing the transforms. This can happen when there is an
indirectbr in the loop.
Fixes PR13892.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164383 91177308-0d34-0410-b5e6-96231b3b80d8
We already have HoistThenElseCodeToIf, this patch implements
SinkThenElseCodeToEnd. When END block has only two predecessors and each
predecessor terminates with unconditional branches, we compare instructions in
IF and ELSE blocks backwards and check whether we can sink the common
instructions down.
rdar://12191395
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164325 91177308-0d34-0410-b5e6-96231b3b80d8
two variables where the first variable is returned and the second
ignored.
I don't think this occurs in practice (other passes should have cleaned
up the unused phi node), but it should still be handled correctly.
Also make the logic for determining if we should return early less
sketchy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164225 91177308-0d34-0410-b5e6-96231b3b80d8
Because the test invokes llc -march=sparc, it needs to be in a directory
which is only run when the sparc target is built.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164211 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up from r163302, which added a transformation to
SimplifyCFG that turns some switches into loads from lookup tables.
It was pointed out that some targets, such as GPUs and deeply embedded
targets, might not find this appropriate, but SimplifyCFG doesn't have
enough information about the target to decide this.
This patch adds the reverse transformation to CodeGenPrep: it turns
loads from lookup tables back into switches for targets where we do not
build jump tables (assuming these are also the targets where lookup
tables are inappropriate).
Hopefully we will eventually get to have target information in
SimplifyCFG, and then this CodeGenPrep transformation can be removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164206 91177308-0d34-0410-b5e6-96231b3b80d8
from the dragonegg build bots when we turned on the full version of the
pass. Included a much reduced test case for this pesky bug, despite
bugpoint's uncooperative behavior.
Also, I audited all the similar code I could find and didn't spot any
other cases where this mistake cropped up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164178 91177308-0d34-0410-b5e6-96231b3b80d8
working on FCA splitting. Instead of refusing to form a common type when
there are uses of a subsection of the alloca as well as a use of the
entire alloca, just skip the subsection uses and continue looking for
a whole-alloca use with a type that we can use.
This produces slightly prettier IR I think, and also fixes the other
failure in the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164146 91177308-0d34-0410-b5e6-96231b3b80d8
FCAs. This is essential in order to promote allocas that are used in
struct returns by frontends like Clang. The FCA load would block the
rest of the pass from firing, resulting is significant regressions with
the bullet benchmark in the nightly test suite.
Thanks to Duncan for repeated discussions about how best to do this, and
to both him and Benjamin for review.
This appears to have blocked many places where the pass tries to fire,
and so I'm expect somewhat different results with this fix added.
As with the last big patch, I'm including a change to enable the SROA by
default *temporarily*. Ben is going to remove this as soon as the LNT
bots pick up the patch. I'm just trying to get a round of LNT numbers
from the stable machines in the lab.
NOTE: Four clang tests are expected to fail in the brief window where
this is enabled. Sorry for the noise!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164119 91177308-0d34-0410-b5e6-96231b3b80d8
Hanlde the case when we split the default edge if the default target has "icmp"
and unconditinal branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164076 91177308-0d34-0410-b5e6-96231b3b80d8
new one, and add support for running the new pass in that mode and in
that slot of the pass manager. With this the new pass can completely
replace the old one within the pipeline.
The strategy for enabling or disabling the SSAUpdater logic is to do it
by making the requirement of the domtree analysis optional. By default,
it is required and we get the standard mem2reg approach. This is usually
the desired strategy when run in stand-alone situations. Within the
CGSCC pass manager, we disable requiring of the domtree analysis and
consequentially trigger fallback to the SSAUpdater promotion.
In theory this would allow the pass to re-use a domtree if one happened
to be available even when run in a mode that doesn't require it. In
practice, it lets us have a single pass rather than two which was
simpler for me to wrap my head around.
There is a hidden flag to force the use of the SSAUpdater code path for
the purpose of testing. The primary testing strategy is just to run the
existing tests through that path. One notable difference is that it has
custom code to handle lifetime markers, and one of the tests has been
enhanced to exercise that code.
This has survived a bootstrap and the test suite without serious
correctness issues, however my run of the test suite produced *very*
alarming performance numbers. I don't entirely understand or trust them
though, so more investigation is on-going.
To aid my understanding of the performance impact of the new SROA now
that it runs throughout the optimization pipeline, I'm enabling it by
default in this commit, and will disable it again once the LNT bots have
picked up one iteration with it. I want to get those bots (which are
much more stable) to evaluate the impact of the change before I jump to
any conclusions.
NOTE: Several Clang tests will fail because they run -O3 and check the
result's order of output. They'll go back to passing once I disable it
again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163965 91177308-0d34-0410-b5e6-96231b3b80d8
destination.
Updated previous implementation to fix a case not covered:
// PBI: br i1 %x, TrueDest, BB
// BI: br i1 %y, TrueDest, FalseDest
The other case was handled correctly.
// PBI: br i1 %x, BB, FalseDest
// BI: br i1 %y, TrueDest, FalseDest
Also tried to use 64-bit arithmetic instead of APInt with scale to simplify the
computation. Let me know if you have other opinions about this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163954 91177308-0d34-0410-b5e6-96231b3b80d8
the default target of the first switch is not the basic block the second switch
is in (PredDefault != BB).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163916 91177308-0d34-0410-b5e6-96231b3b80d8
This is essentially a ground up re-think of the SROA pass in LLVM. It
was initially inspired by a few problems with the existing pass:
- It is subject to the bane of my existence in optimizations: arbitrary
thresholds.
- It is overly conservative about which constructs can be split and
promoted.
- The vector value replacement aspect is separated from the splitting
logic, missing many opportunities where splitting and vector value
formation can work together.
- The splitting is entirely based around the underlying type of the
alloca, despite this type often having little to do with the reality
of how that memory is used. This is especially prevelant with unions
and base classes where we tail-pack derived members.
- When splitting fails (often due to the thresholds), the vector value
replacement (again because it is separate) can kick in for
preposterous cases where we simply should have split the value. This
results in forming i1024 and i2048 integer "bit vectors" that
tremendously slow down subsequnet IR optimizations (due to large
APInts) and impede the backend's lowering.
The new design takes an approach that fundamentally is not susceptible
to many of these problems. It is the result of a discusison between
myself and Duncan Sands over IRC about how to premptively avoid these
types of problems and how to do SROA in a more principled way. Since
then, it has evolved and grown, but this remains an important aspect: it
fixes real world problems with the SROA process today.
First, the transform of SROA actually has little to do with replacement.
It has more to do with splitting. The goal is to take an aggregate
alloca and form a composition of scalar allocas which can replace it and
will be most suitable to the eventual replacement by scalar SSA values.
The actual replacement is performed by mem2reg (and in the future
SSAUpdater).
The splitting is divided into four phases. The first phase is an
analysis of the uses of the alloca. This phase recursively walks uses,
building up a dense datastructure representing the ranges of the
alloca's memory actually used and checking for uses which inhibit any
aspects of the transform such as the escape of a pointer.
Once we have a mapping of the ranges of the alloca used by individual
operations, we compute a partitioning of the used ranges. Some uses are
inherently splittable (such as memcpy and memset), while scalar uses are
not splittable. The goal is to build a partitioning that has the minimum
number of splits while placing each unsplittable use in its own
partition. Overlapping unsplittable uses belong to the same partition.
This is the target split of the aggregate alloca, and it maximizes the
number of scalar accesses which become accesses to their own alloca and
candidates for promotion.
Third, we re-walk the uses of the alloca and assign each specific memory
access to all the partitions touched so that we have dense use-lists for
each partition.
Finally, we build a new, smaller alloca for each partition and rewrite
each use of that partition to use the new alloca. During this phase the
pass will also work very hard to transform uses of an alloca into a form
suitable for promotion, including forming vector operations, speculating
loads throguh PHI nodes and selects, etc.
After splitting is complete, each newly refined alloca that is
a candidate for promotion to a scalar SSA value is run through mem2reg.
There are lots of reasonably detailed comments in the source code about
the design and algorithms, and I'm going to be trying to improve them in
subsequent commits to ensure this is well documented, as the new pass is
in many ways more complex than the old one.
Some of this is still a WIP, but the current state is reasonbly stable.
It has passed bootstrap, the nightly test suite, and Duncan has run it
successfully through the ACATS and DragonEgg test suites. That said, it
remains behind a default-off flag until the last few pieces are in
place, and full testing can be done.
Specific areas I'm looking at next:
- Improved comments and some code cleanup from reviews.
- SSAUpdater and enabling this pass inside the CGSCC pass manager.
- Some datastructure tuning and compile-time measurements.
- More aggressive FCA splitting and vector formation.
Many thanks to Duncan Sands for the thorough final review, as well as
Benjamin Kramer for lots of review during the process of writing this
pass, and Daniel Berlin for reviewing the data structures and algorithms
and general theory of the pass. Also, several other people on IRC, over
lunch tables, etc for lots of feedback and advice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163883 91177308-0d34-0410-b5e6-96231b3b80d8
a pair of switch/branch where both depend on the value of the same variable and
the default case of the first switch/branch goes to the second switch/branch.
Code clean up and fixed a few issues:
1> handling the case where some cases of the 2nd switch are invalidated
2> correctly calculate the weight for the 2nd switch when it is a conditional eq
Testing case is modified from Alastair's original patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163635 91177308-0d34-0410-b5e6-96231b3b80d8
The lookup tables did not get built in a deterministic order.
This makes them get built in the order that the corresponding phi nodes
were found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163305 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a transformation to SimplifyCFG that attemps to turn switch
instructions into loads from lookup tables. It works on switches that
are only used to initialize one or more phi nodes in a common successor
basic block, for example:
int f(int x) {
switch (x) {
case 0: return 5;
case 1: return 4;
case 2: return -2;
case 5: return 7;
case 6: return 9;
default: return 42;
}
This speeds up the code by removing the hard-to-predict jump, and
reduces code size by removing the code for the jump targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163302 91177308-0d34-0410-b5e6-96231b3b80d8
switch, make sure we include the value for the cases when calculating edge
value from switch to the default destination.
rdar://12241132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163270 91177308-0d34-0410-b5e6-96231b3b80d8
pointers-to-strong-pointers may be in play. These can lead to retains and
releases happening in unstructured ways, foiling the optimizer. This fixes
rdar://12150909.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163180 91177308-0d34-0410-b5e6-96231b3b80d8
Scan the body of the loop and find instructions that may trap.
Use this information when deciding if it is safe to hoist or sink instructions.
Notice that we can optimize the search of instructions that may throw in the case of nested loops.
rdar://11518836
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163132 91177308-0d34-0410-b5e6-96231b3b80d8
This code used to only handle malloc-like calls, which do not read memory.
r158919 changed it to check isNoAliasFn(), which includes strdup-like and
realloc-like calls, but it was not checking for dependencies on the memory
read by those calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163106 91177308-0d34-0410-b5e6-96231b3b80d8
We update until we hit a fixpoint. This is probably slow but also
slightly simplifies the code. It should also fix the occasional
invalid domtrees observed when building with expensive checking.
I couldn't find a case where this had a measurable slowdown, but
if someone finds a pathological case where it does we may have
to find a cleverer way of updating dominators here.
Thanks to Duncan for the test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163091 91177308-0d34-0410-b5e6-96231b3b80d8
The old PHI updating code in loop-rotate was replaced with SSAUpdater a while
ago, it has no problems with comples PHIs. What had to be fixed is detecting
whether a loop was already rotated and updating dominators when multiple exits
were present.
This change increases overall code size a bit, mostly due to additional loop
unrolling opportunities. Passes test-suite and selfhost with -verify-dom-info.
Fixes PR7447.
Thanks to Andy for the input on the domtree updating code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162912 91177308-0d34-0410-b5e6-96231b3b80d8
This disables malloc-specific optimization when -fno-builtin (or -ffreestanding)
is specified. This has been a problem for a long time but became more severe
with the recent memory builtin improvements.
Since the memory builtin functions are used everywhere, this required passing
TLI in many places. This means that functions that now have an optional TLI
argument, like RecursivelyDeleteTriviallyDeadFunctions, won't remove dead
mallocs anymore if the TLI argument is missing. I've updated most passes to do
the right thing.
Fixes PR13694 and probably others.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162841 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization is really just replacing allocas wholesale with
globals, there is no scalarization.
The underlying motivation for this patch is to simplify the SROA pass
and focus it on splitting and promoting allocas.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162271 91177308-0d34-0410-b5e6-96231b3b80d8
The previous fix only checked for simple cycles, use a set to catch longer
cycles too.
Drop the broken check from the ObjectSizeOffsetEvaluator. The BoundsChecking
pass doesn't have to deal with invalid IR like InstCombine does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162120 91177308-0d34-0410-b5e6-96231b3b80d8
I really need to find a way to automate this, but I can't come up with a regex
that has no false positives while handling tricky cases like custom check
prefixes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162097 91177308-0d34-0410-b5e6-96231b3b80d8
where some fact lake a=b dominates a use in a phi, but doesn't dominate the
basic block itself.
This feature could also be implemented by splitting critical edges, but at least
with the current algorithm reasoning about the dominance directly is faster.
The time for running "opt -O2" in the testcase in pr10584 is 1.003 times slower
and on gcc as a single file it is 1.0007 times faster.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@162023 91177308-0d34-0410-b5e6-96231b3b80d8
- memcpy size is wrongly truncated into 32-bit and treat 8GB memcpy is
0-sized memcpy
- as 0-sized memcpy/memset is already removed before SimplifyMemTransfer
and SimplifyMemSet in visitCallInst, replace 0 checking with
assertions.
- replace getZExtValue() with getLimitedValue() according to
Eli Friedman
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161923 91177308-0d34-0410-b5e6-96231b3b80d8
and allow some optimizations to turn conditional branches into unconditional.
This commit adds a simple control-flow optimization which merges two consecutive
basic blocks which are connected by a single edge. This allows the codegen to
operate on larger basic blocks.
rdar://11973998
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161852 91177308-0d34-0410-b5e6-96231b3b80d8
multiple scalar promotions on a single loop. This also has the effect of
preserving the order of stores sunk out of loops, which is aesthetically
pleasing, and it happens to fix the testcase in PR13542, though it doesn't
fix the underlying problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161459 91177308-0d34-0410-b5e6-96231b3b80d8
An unsigned value converted to floating-point will always be greater than
a negative constant. Unfortunately InstCombine reversed the check so that
unsigned values were being optimized to always be greater than all positive
floating-point constants. <rdar://problem/12029145>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161452 91177308-0d34-0410-b5e6-96231b3b80d8
We give a bonus for every argument because the argument setup is not needed
anymore when the function is inlined. With this patch we interpret byval
arguments as a compact representation of many arguments. The byval argument
setup is implemented in the backend as an inline memcpy, so to model the
cost as accurately as possible we take the number of pointer-sized elements
in the byval argument and give a bonus of 2 instructions for every one of
those. The bonus is capped at 8 elements, which is the number of stores
at which the x86 backend switches from an expanded inline memcpy to a real
memcpy. It would be better to use the real memcpy threshold from the backend,
but it's not available via TargetData.
This change brings the performance of c-ray in line with gcc 4.7. The included
test case tries to reproduce the c-ray problem to catch regressions for this
benchmark early, its performance is dominated by the inline decision of a
specific call.
This only has a small impact on most code, more on x86 and arm than on x86_64
due to the way the ABI works. When building LLVM for x86 it gives a small
inline cost boost to virtually any function using StringRef or STL allocators,
but only a 0.01% increase in overall binary size. The size of gcc compiled by
clang actually shrunk by a couple bytes with this patch applied, but not
significantly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161413 91177308-0d34-0410-b5e6-96231b3b80d8
instsimplify+inline strategy.
The crux of the problem is that instsimplify was reasonably relying on
an invariant that is true within any single function, but is no longer
true mid-inline the way we use it. This invariant is that an argument
pointer != a local (alloca) pointer.
The fix is really light weight though, and allows instsimplify to be
resiliant to these situations: when checking the relation ships to
function arguments, ensure that the argumets come from the same
function. If they come from different functions, then none of these
assumptions hold. All credit to Benjamin Kramer for coming up with this
clever solution to the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161410 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, MBP essentially aligned every branch target it could. This
bloats code quite a bit, especially non-looping code which has no real
reason to prefer aligned branch targets so heavily.
As Andy said in review, it's still a bit odd to do this without a real
cost model, but this at least has much more plausible heuristics.
Fixes PR13265.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@161409 91177308-0d34-0410-b5e6-96231b3b80d8
This can happen as long as the instruction is not reachable. Instcombine does generate these unreachable malformed selects when doing RAUW
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160874 91177308-0d34-0410-b5e6-96231b3b80d8
of an array element (rather than at the beginning of the element) and extended
into the next element, then the load from the second element was being handled
wrong due to incorrect updating of the notion of which byte to load next. This
fixes PR13442. Thanks to Chris Smowton for reporting the problem, analyzing it
and providing a fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160711 91177308-0d34-0410-b5e6-96231b3b80d8
might be deliberate "one time" leaks, so that leak checkers can find them.
This is a reapply of r160602 with the fix that this time I'm committing the
code I thought I was committing last time; the I->eraseFromParent() goes
*after* the break out of the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160664 91177308-0d34-0410-b5e6-96231b3b80d8
r160529 that was subsequently reverted. The fix was to not call
GV->eraseFromParent() right before the caller does the same. The existing
testcases already caught this bug if run under valgrind.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160602 91177308-0d34-0410-b5e6-96231b3b80d8
GetBestDestForJumpOnUndef() assumes there is at least 1 successor, which isn't
true if the block ends in an indirect branch with no successors. Fix this by
bailing out earlier in this case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160546 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR13371: indvars pass incorrectly substitutes 'undef' values.
I do not like this fix. It's needed until/unless the meaning of undef
changes. It attempts to be complete according to the IR spec, but I
don't have much confidence in the implementation given the difficulty
testing undefined behavior. Worse, this invalidates some of my
hard-fought work on indvars and LSR to optimize pointer induction
variables. It results benchmark regressions, which I'll track
internally. On x86_64 no LTO I see:
-3% huffbench
-3% 400.perlbench
-8% fhourstones
My only suggestion for recovering is to change the meaning of
undef. If we could trust an arbitrary instruction to produce a some
real value that can be manipulated (e.g. incremented) according to
non-undef rules, then this case could be easily handled with SCEV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160421 91177308-0d34-0410-b5e6-96231b3b80d8
It began choking since Chandler's r159547, possibly due to improper expression on grep from TclParser to ShParser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160367 91177308-0d34-0410-b5e6-96231b3b80d8
All SCEV expressions used by LSR formulae must be safe to
expand. i.e. they may not contain UDiv unless we can prove nonzero
denominator.
Fixes PR11356: LSR hoists UDiv.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160205 91177308-0d34-0410-b5e6-96231b3b80d8
%shr = lshr i64 %key, 3
%0 = load i64* %val, align 8
%sub = add i64 %0, -1
%and = and i64 %sub, %shr
ret i64 %and
to:
%shr = lshr i64 %key, 3
%0 = load i64* %val, align 8
%sub = add i64 %0, 2305843009213693951
%and = and i64 %sub, %shr
ret i64 %and
The demanded bit optimization is actually a pessimization because add -1 would
be codegen'ed as a sub 1. Teach the demanded constant shrinking optimization
to check for negated constant to make sure it is actually reducing the width
of the constant.
rdar://11793464
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@160101 91177308-0d34-0410-b5e6-96231b3b80d8
This patch removes ~70 lines in InstCombineLoadStoreAlloca.cpp and makes both functions a bit more aggressive than before :)
In theory, we can be more aggressive when removing an alloca than a malloc, because an alloca pointer should never escape, but we are not taking advantage of this anyway
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159952 91177308-0d34-0410-b5e6-96231b3b80d8
This means we can do cheap DSE for heap memory.
Nothing is done if the pointer excapes or has a load.
The churn in the tests is mostly due to objectsize, since we want to make sure we
don't delete the malloc call before evaluating the objectsize (otherwise it becomes -1/0)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159876 91177308-0d34-0410-b5e6-96231b3b80d8
another mechanical change accomplished though the power of terrible Perl
scripts.
I have manually switched some "s to 's to make escaping simpler.
While I started this to fix tests that aren't run in all configurations,
the massive number of tests is due to a really frustrating fragility of
our testing infrastructure: things like 'grep -v', 'not grep', and
'expected failures' can mask broken tests all too easily.
Essentially, I'm deeply disturbed that I can change the testsuite so
radically without causing any change in results for most platforms. =/
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159547 91177308-0d34-0410-b5e6-96231b3b80d8
versions of Bash. In addition, I can back out the change to the lit
built-in shell test runner to support this.
This should fix the majority of fallout on Darwin, but I suspect there
will be a few straggling issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159544 91177308-0d34-0410-b5e6-96231b3b80d8
This was done through the aid of a terrible Perl creation. I will not
paste any of the horrors here. Suffice to say, it require multiple
staged rounds of replacements, state carried between, and a few
nested-construct-parsing hacks that I'm not proud of. It happens, by
luck, to be able to deal with all the TCL-quoting patterns in evidence
in the LLVM test suite.
If anyone is maintaining large out-of-tree test trees, feel free to poke
me and I'll send you the steps I used to convert things, as well as
answer any painful questions etc. IRC works best for this type of thing
I find.
Once converted, switch the LLVM lit config to use ShTests the same as
Clang. In addition to being able to delete large amounts of Python code
from 'lit', this will also simplify the entire test suite and some of
lit's architecture.
Finally, the test suite runs 33% faster on Linux now. ;]
For my 16-hardware-thread (2x 4-core xeon e5520): 36s -> 24s
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159525 91177308-0d34-0410-b5e6-96231b3b80d8
The original algorithm only used recursive pair fusion of equal-length
types. This is now extended to allow pairing of any types that share
the same underlying scalar type. Because we would still generally
prefer the 2^n-length types, those are formed first. Then a second
set of iterations form the non-2^n-length types.
Also, a call to SimplifyInstructionsInBlock has been added after each
pairing iteration. This takes care of DCE (and a few other things)
that make the following iterations execute somewhat faster. For the
same reason, some of the simple shuffle-combination cases are now
handled internally.
There is some additional refactoring work to be done, but I've had
many requests for this feature, so additional refactoring will come
soon in future commits (as will additional test cases).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159330 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
If a constant or a function has linkonce_odr linkage and unnamed_addr, mark it
hidden. Being linkonce_odr guarantees that it is available in every dso that
needs it. Being a constant/function with unnamed_addr guarantees that the
copies don't have to be merged.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159272 91177308-0d34-0410-b5e6-96231b3b80d8
before the expression root. Any existing operators that are changed to use one
of them needs to be moved between it and the expression root, and recursively
for the operators using that one. When I rewrote RewriteExprTree I accidentally
inverted the logic, resulting in the compacting going down from operators to
operands rather than up from operands to the operators using them, oops. Fix
this, resolving PR12963.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159265 91177308-0d34-0410-b5e6-96231b3b80d8
// C - zext(bool) -> bool ? C - 1 : C
if (ZExtInst *ZI = dyn_cast<ZExtInst>(Op1))
if (ZI->getSrcTy()->isIntegerTy(1))
return SelectInst::Create(ZI->getOperand(0), SubOne(C), C);
This ends up forming sext i1 instructions that codegen to terrible code. e.g.
int blah(_Bool x, _Bool y) {
return (x - y) + 1;
}
=>
movzbl %dil, %eax
movzbl %sil, %ecx
shll $31, %ecx
sarl $31, %ecx
leal 1(%rax,%rcx), %eax
ret
Without the rule, llvm now generates:
movzbl %sil, %ecx
movzbl %dil, %eax
incl %eax
subl %ecx, %eax
ret
It also helps with ARM (and pretty much any target that doesn't have a sext i1 :-).
The transformation was done as part of Eli's r75531. He has given the ok to
remove it.
rdar://11748024
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159230 91177308-0d34-0410-b5e6-96231b3b80d8
merge all zero-sized alloca's into one, fixing c43204g from the Ada ACATS
conformance testsuite. What happened there was that a variable sized object
was being allocated on the stack, "alloca i8, i32 %size". It was then being
passed to another function, which tested that the address was not null (raising
an exception if it was) then manipulated %size bytes in it (load and/or store).
The optimizers cleverly managed to deduce that %size was zero (congratulations
to them, as it isn't at all obvious), which made the alloca zero size, causing
the optimizers to replace it with null, which then caused the check mentioned
above to fail, and the exception to be raised, wrongly. Note that no loads
and stores were actually being done to the alloca (the loop that does them is
executed %size times, i.e. is not executed), only the not-null address check.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159202 91177308-0d34-0410-b5e6-96231b3b80d8
The primary advantage is that loop optimizations will be applied in a
stable order. This helps debugging and unit test creation. It is also
a better overall implementation without pathologically bad performance
on deep functions.
On large functions (llvm-stress --size=200000 | opt -loops)
Before: 0.1263s
After: 0.0225s
On deep functions (after tweaking llvm-stress, thanks Nadav):
Before: 0.2281s
After: 0.0227s
See r158790 for more comments.
The loop tree is now consistently generated in forward order, but loop
passes are applied in reverse order over the program. If we have a
loop optimization that prefers forward order, that can easily be
achieved by adding a different type of LoopPassManager.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159183 91177308-0d34-0410-b5e6-96231b3b80d8
- simplifycfg: invoke undef/null -> unreachable
- instcombine: invoke new -> invoke expect(0, 0) (an arbitrary NOOP intrinsic; only done if the allocated memory is unused, of course)
- verifier: allow invoke of intrinsics (to make the previous step work)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159146 91177308-0d34-0410-b5e6-96231b3b80d8
hidden. Being linkonce_odr guarantees that it is available in every dso that
needs it. Being a constant/function with unnamed_addr guarantees that the
copies don't have to be merged.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159136 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR5997.
These transforms were disabled because codegen couldn't deal with other
uses of trunc(x). This is now handled by the peephole pass.
This causes no regressions on x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@159003 91177308-0d34-0410-b5e6-96231b3b80d8
- provide more extensive set of functions to detect library allocation functions (e.g., malloc, calloc, strdup, etc)
- provide an API to compute the size and offset of an object pointed by
Move a few clients (GVN, AA, instcombine, ...) to the new API.
This implementation is a lot more aggressive than each of the custom implementations being replaced.
Patch reviewed by Nick Lewycky and Chandler Carruth, thanks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158919 91177308-0d34-0410-b5e6-96231b3b80d8
The present implementation handles only TBAA and FP metadata, discarding everything else.
For debug metadata, the current behavior is maintained (the debug metadata associated with
one of the instructions will be kept, discarding that attached to the other).
This should address PR 13040.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158606 91177308-0d34-0410-b5e6-96231b3b80d8
Dynamic GEPs created by SROA needed to insert extra "i32 0"
operands to index through structs and arrays to get to the
vector being indexed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158590 91177308-0d34-0410-b5e6-96231b3b80d8
linkonce linkage. For example, it is not valid to add unnamed_addr.
This also fixes a crash in g++.dg/opt/static5.C.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158528 91177308-0d34-0410-b5e6-96231b3b80d8
example degenerate phi nodes and binops that use themselves in unreachable code.
Thanks to Charles Davis for the testcase that uncovered this can of worms.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@158508 91177308-0d34-0410-b5e6-96231b3b80d8