needs to be fixed here - a previous commit made sure
that intrinsics always get the right attributes.
So remove no-longer needed code, and while there use
Intrinsic::getDeclaration rather than getOrInsertFunction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49337 91177308-0d34-0410-b5e6-96231b3b80d8
nounwind. When such calls are inlined into something
else that is invoked, they were getting changed to invokes,
which is badness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49299 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically, introduction of XXX::Create methods
for Users that have a potentially variable number of
Uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49277 91177308-0d34-0410-b5e6-96231b3b80d8
inlining a function if we know that the function does not write
to *any* memory. This implements test/Transforms/Inline/byval2.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45912 91177308-0d34-0410-b5e6-96231b3b80d8
define void @f() {
...
call i32 @g()
...
}
define void @g() {
...
}
The hazards are:
- @f and @g have GC, but they differ GC. Inlining is invalid. This
may never occur.
- @f has no GC, but @g does. g's GC must be propagated to @f.
The other scenarios are safe:
- @f and @g have the same GC.
- @f and @g have no GC.
- @g has no GC.
This patch adds inliner checks for the former two scenarios.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45351 91177308-0d34-0410-b5e6-96231b3b80d8
calls 'nounwind'. It is important for correct C++
exception handling that nounwind markings do not get
lost, so this transformation is actually needed for
correctness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45218 91177308-0d34-0410-b5e6-96231b3b80d8
how to lower them (with no attempt made to be
efficient, since they should only occur for
unoptimized code).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45108 91177308-0d34-0410-b5e6-96231b3b80d8
calls. Remove special casing of inline asm from the
inliner. There is a potential problem: the verifier
rejects invokes of inline asm (not sure why). If an
asm call is not marked "nounwind" in some .ll, and
instcombine is not run, but the inliner is run, then
an illegal module will be created. This is bad but
I'm not sure what the best approach is. I'm tempted
to remove the check in the verifier...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@45073 91177308-0d34-0410-b5e6-96231b3b80d8
throw exceptions", just mark intrinsics with the nounwind
attribute. Likewise, mark intrinsics as readnone/readonly
and get rid of special aliasing logic (which didn't use
anything more than this anyway).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44544 91177308-0d34-0410-b5e6-96231b3b80d8
the function type, instead they belong to functions
and function calls. This is an updated and slightly
corrected version of Reid Spencer's original patch.
The only known problem is that auto-upgrading of
bitcode files doesn't seem to work properly (see
test/Bitcode/AutoUpgradeIntrinsics.ll). Hopefully
a bitcode guru (who might that be? :) ) will fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44359 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces signed integer types with signless ones:
1. [US]Byte -> Int8
2. [U]Short -> Int16
3. [U]Int -> Int32
4. [U]Long -> Int64.
5. Removal of isSigned, isUnsigned, getSignedVersion, getUnsignedVersion
and other methods related to signedness. In a few places this warranted
identifying the signedness information from other sources.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@32785 91177308-0d34-0410-b5e6-96231b3b80d8
Handle this case, which doesn't require a new callgraph edge. This fixes
a crash compiling MallocBench/gs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29121 91177308-0d34-0410-b5e6-96231b3b80d8
target CG node. This allows the inliner to properly update the callgraph
when using the pruning inliner. The pruning inliner may not copy over all
call sites from a callee to a caller, so the edges corresponding to those
call sites should not be copied over either.
This fixes PR827 and Transforms/Inline/2006-07-12-InlinePruneCGUpdate.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@29120 91177308-0d34-0410-b5e6-96231b3b80d8
makes it so that it constant folds instructions on the fly. This is good
for several reasons:
0. Many instructions are constant foldable after inlining, particularly if
inlining a call with constant arguments.
1. Without this, the inliner has to allocate memory for all of the instructions
that can be constant folded, then a subsequent pass has to delete them. This
gets the job done without this extra work.
2. This makes the inliner *pass* a bit more aggressive: in particular, it
partially solves a phase order issue where the inliner would inline lots
of code that folds away to nothing, but think that the resultant function
is big because of this code that will be gone. Now the code never exists.
This is the first part of a 2-step process. The second part will be smart
enough to see when this implicit constant folding propagates a constant into
a branch or switch instruction, making CFG edges dead.
This implements Transforms/Inline/inline_constprop.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@28521 91177308-0d34-0410-b5e6-96231b3b80d8
it doesn't contain any calls. This is a fairly common case for C++ code,
so it will probably speed up the inliner marginally in these cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25284 91177308-0d34-0410-b5e6-96231b3b80d8
function was not an alloca, we wouldn't check the entry block for any allocas,
leading to increased stack space in some cases. In practice, allocas are almost
always at the top of the block, so this was never noticed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@25280 91177308-0d34-0410-b5e6-96231b3b80d8
using Function::arg_{iterator|begin|end}. Likewise Module::g* -> Module::global_*.
This patch is contributed by Gabor Greif, thanks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@20597 91177308-0d34-0410-b5e6-96231b3b80d8
If a function had no return instruction in it, and the result of the inlined
call instruction was used, we would crash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@17104 91177308-0d34-0410-b5e6-96231b3b80d8
Basically we were using SimplifyCFG as a huge sledgehammer for a simple
optimization. Because simplifycfg does so many things, we can't use it
for this purpose.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@12977 91177308-0d34-0410-b5e6-96231b3b80d8
allowed in invoke instructions. Thus, if we are inlining a call to an intrinsic
function into an invoke site, we don't need to turn the call into an invoke!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11384 91177308-0d34-0410-b5e6-96231b3b80d8
1. Don't scan to the end of alloca instructions in the caller function to
insert inlined allocas, just insert at the top. This saves a lot of
time inlining into functions with a lot of allocas.
2. Use splice to move the alloca instructions over, instead of remove/insert.
This allows us to transfer a block at a time, and eliminates a bunch of
silly symbol table manipulations.
This speeds up the inliner on the testcase in PR209 from 1.73s -> 1.04s (67%)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11118 91177308-0d34-0410-b5e6-96231b3b80d8
and that basic block ends with a return instruction. In this case, we can just splice
the cloned "body" of the function directly into the source basic block, avoiding a lot
of rearrangement and splitBasicBlock's linear scan over the split block. This speeds up
the inliner on the testcase in PR209 from 2.3s to 1.7s, a 35% reduction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11116 91177308-0d34-0410-b5e6-96231b3b80d8
before we delete the original call site, allowing slight simplifications of
code, but nothing exciting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11109 91177308-0d34-0410-b5e6-96231b3b80d8
process. The only optimization we did so far is to avoid creating a
PHI node, then immediately destroying it in the common case where the
callee has one return statement. Instead, we just don't create the return
value. This has no noticable performance impact, but paves the way for
future improvements.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@11108 91177308-0d34-0410-b5e6-96231b3b80d8
PHI node entries for unwind instructions just like for call instructions which
became invokes! This fixes PR57, tested by
Inline/2003-10-26-InlineInvokeExceptionDestPhi.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9526 91177308-0d34-0410-b5e6-96231b3b80d8
break dominance relationships, and is otherwise bad. This fixes bug:
Inline/2003-10-13-AllocaDominanceProblem.ll. This also fixes miscompilation
of 3 176.gcc source files (reload1.c, global.c, flow.c)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@9109 91177308-0d34-0410-b5e6-96231b3b80d8
Running the inliner on 252.eon used to take 48.4763s, now it takes 14.4148s.
In release mode, it went from taking 25.8741s to taking 11.5712s.
This also fixes a FIXME.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8890 91177308-0d34-0410-b5e6-96231b3b80d8
... by making sure to update PHI nodes to take into consideration the
extra edges we get if we inline a call instruction through an invoke.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@8664 91177308-0d34-0410-b5e6-96231b3b80d8
