Summary:
This instruction encodes a loading operation that may fault, and a label
to branch to if the load page-faults. The locations of potentially
faulting loads and their "handler" destinations are recorded in a
FaultMap section, meant to be consumed by LLVM's clients.
Nothing generates FAULTING_LOAD_OP instructions yet, but they will be
used in a future change.
The documentation (FaultMaps.rst) needs improvement and I will update
this diff with a more expanded version shortly.
Depends on D10196
Reviewers: rnk, reames, AndyAyers, ab, atrick, pgavlin
Reviewed By: atrick, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10197
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239740 91177308-0d34-0410-b5e6-96231b3b80d8
If there is an InstAlias defined for an instruction that had a custom
converter (AsmMatchConverter), then when the alias is matched,
the custom converter will be used rather than the converter generated
by the InstAlias.
This patch adds the UseInstAsmMatchConverter field to the InstAlias
class, which allows you to override this behavior and force the
converter generated by the InstAlias to be used.
This is required for some future improvemnts to the R600 assembler.
Differential Revision: http://reviews.llvm.org/D9083
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238210 91177308-0d34-0410-b5e6-96231b3b80d8
Specify an allocation order with a register class. This is used by register
allocators with a greedy heuristic. This is usefull as it is sometimes
beneficial to color more constrained classes first.
Differential Revision: http://reviews.llvm.org/D8626
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233743 91177308-0d34-0410-b5e6-96231b3b80d8
per-function subtarget.
Currently, code-gen passes the default or generic subtarget to the constructors
of MCInstPrinter subclasses (see LLVMTargetMachine::addPassesToEmitFile), which
enables some targets (AArch64, ARM, and X86) to change their instprinter's
behavior based on the subtarget feature bits. Since the backend can now use
different subtargets for each function, instprinter has to be changed to use the
per-function subtarget rather than the default subtarget.
This patch takes the first step towards enabling instprinter to change its
behavior based on the per-function subtarget. It adds a bit "PassSubtarget" to
AsmWriter which tells table-gen to pass a reference to MCSubtargetInfo to the
various print methods table-gen auto-generates.
I will follow up with changes to instprinters of AArch64, ARM, and X86.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@233411 91177308-0d34-0410-b5e6-96231b3b80d8
Gather and scatter instructions additionally write to one of the source operands - mask register.
In this case Gather has 2 destination values - the loaded value and the mask.
Till now we did not support code gen pattern for gather - the instruction was generated from
intrinsic only and machine node was hardcoded.
When we introduce the masked_gather node, we need to select instruction automatically,
in the standard way.
I added a flag "hasTwoExplicitDefs" that allows to handle 2 destination operands.
(Some code in the X86InstrFragmentsSIMD.td is commented out, just to split one big
patch in many small patches)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230471 91177308-0d34-0410-b5e6-96231b3b80d8
These intrinsics allow multiple functions to share a single stack
allocation from one function's call frame. The function with the
allocation may only perform one allocation, and it must be in the entry
block.
Functions accessing the allocation call llvm.recoverframeallocation with
the function whose frame they are accessing and a frame pointer from an
active call frame of that function.
These intrinsics are very difficult to inline correctly, so the
intention is that they be introduced rarely, or at least very late
during EH preparation.
Reviewers: echristo, andrew.w.kaylor
Differential Revision: http://reviews.llvm.org/D6493
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225746 91177308-0d34-0410-b5e6-96231b3b80d8
This adds two new fields to the RegisterOperand TableGen class:
string OperandNamespace = "MCOI";
string OperandType = "OPERAND_REGISTER";
These fields can be used to specify a target specific operand type,
which will be stored in the OperandType member of the MCOperandInfo
object.
This can be useful for targets that need to store some extra information
about operands that cannot be expressed using the target independent
types. For example, in the R600 backend, there are operands which
can take either registers or immediates and it is convenient to be able
to specify this in the TableGen definitions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@225661 91177308-0d34-0410-b5e6-96231b3b80d8
This is the second patch in a small series. This patch contains the MachineInstruction and x86-64 backend pieces required to lower Statepoints. It does not include the code to actually generate the STATEPOINT machine instruction and as a result, the entire patch is currently dead code. I will be submitting the SelectionDAG parts within the next 24-48 hours. Since those pieces are by far the most complicated, I wanted to minimize the size of that patch. That patch will include the tests which exercise the functionality in this patch. The entire series can be seen as one combined whole in http://reviews.llvm.org/D5683.
The STATEPOINT psuedo node is generated after all gc values are explicitly spilled to stack slots. The purpose of this node is to wrap an actual call instruction while recording the spill locations of the meta arguments used for garbage collection and other purposes. The STATEPOINT is modeled as modifing all of those locations to prevent backend optimizations from forwarding the value from before the STATEPOINT to after the STATEPOINT. (Doing so would break relocation semantics for collectors which wish to relocate roots.)
The implementation of STATEPOINT is closely modeled on PATCHPOINT. Eventually, much of the code in this patch will be removed. The long term plan is to merge the functionality provided by statepoints and patchpoints. Merging their implementations in the backend is likely to be a good starting point.
Reviewed by: atrick, ributzka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223085 91177308-0d34-0410-b5e6-96231b3b80d8
The problem is mostly that variadic output instruction
aren't handled, so it is rejected for having an inconsistent
number of operands, and then the right number of operands
isn't emitted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221117 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new property: isInsertSubreg and the related target hooks:
TargetIntrInfo::getInsertSubregInputs and
TargetInstrInfo::getInsertSubregLikeInputs to specify that a target specific
instruction is a (kind of) INSERT_SUBREG.
The approach is similar to r215394.
<rdar://problem/12702965>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216139 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new property: isExtractSubreg and the related target hooks:
TargetIntrInfo::getExtractSubregInputs and
TargetInstrInfo::getExtractSubregLikeInputs to specify that a target specific
instruction is a (kind of) EXTRACT_SUBREG.
The approach is similar to r215394.
<rdar://problem/12702965>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216130 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new property: isRegSequence and the related target hooks:
TargetIntrInfo::getRegSequenceInputs and
TargetInstrInfo::getRegSequenceLikeInputs to specify that a target specific
instruction is a (kind of) REG_SEQUENCE.
<rdar://problem/12702965>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215394 91177308-0d34-0410-b5e6-96231b3b80d8
address of the stack guard was being spilled to the stack.
Previously the address of the stack guard would get spilled to the stack if it
was impossible to keep it in a register. This patch introduces a new target
independent node and pseudo instruction which gets expanded post-RA to a
sequence of instructions that load the stack guard value. Register allocator
can now just remat the value when it can't keep it in a register.
<rdar://problem/12475629>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213967 91177308-0d34-0410-b5e6-96231b3b80d8
inverted condition codes (CINC, CINV, CNEG, CSET, and CSETM).
Matching aliases based on "immediate classes", when disassembling,
wasn't previously supported, hence adding MCOperandPredicate
into class Operand, and implementing the support for it
in AsmWriterEmitter.
The parsing for those aliases was already custom, so just adding
the missing condition into AArch64AsmParser::parseCondCode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@210528 91177308-0d34-0410-b5e6-96231b3b80d8
When multiple aliases overlap, the correct string to print can often be
determined purely by considering the InstAlias declarations in some particular
order. This allows the user to specify that order manually when desired,
without resorting to hacking around with the default lexicographical order on
Record instantiation, which is error-prone and ugly.
I was also mistaken about "add w2, w3, w4" being the same as "add w2, w3, w4,
uxtw". That's only true if Rn is the stack pointer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209199 91177308-0d34-0410-b5e6-96231b3b80d8
There are currently two schemes for mapping instruction operands to
instruction-format variables for generating the instruction encoders and
decoders for the assembler and disassembler respectively: a) to map by name and
b) to map by position.
In the long run, we'd like to remove the position-based scheme and use only
name-based mapping. Unfortunately, the name-based scheme currently cannot deal
with complex operands (those with suboperands), and so we currently must use
the position-based scheme for those. On the other hand, the position-based
scheme cannot deal with (register) variables that are split into multiple
ranges. An upcoming commit to the PowerPC backend (adding VSX support) will
require this capability. While we could teach the position-based scheme to
handle that, since we'd like to move away from the position-based mapping
generally, it seems silly to teach it new tricks now. What makes more sense is
to allow for partial transitioning: use the name-based mapping when possible,
and only use the position-based scheme when necessary.
Now the problem is that mixing the two sensibly was not possible: the
position-based mapping would map based on position, but would not skip those
variables that were mapped by name. Instead, the two sets of assignments would
overlap. However, I cannot currently change the current behavior, because there
are some backends that rely on it [I think mistakenly, but I'll send a message
to llvmdev about that]. So I've added a new TableGen bit variable:
noNamedPositionallyEncodedOperands, that can be used to cause the
position-based mapping to skip variables mapped by name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203767 91177308-0d34-0410-b5e6-96231b3b80d8
The old system was fairly convoluted:
* A temporary label was created.
* A single PROLOG_LABEL was created with it.
* A few MCCFIInstructions were created with the same label.
The semantics were that the cfi instructions were mapped to the PROLOG_LABEL
via the temporary label. The output position was that of the PROLOG_LABEL.
The temporary label itself was used only for doing the mapping.
The new CFI_INSTRUCTION has a 1:1 mapping to MCCFIInstructions and points to
one by holding an index into the CFI instructions of this function.
I did consider removing MMI.getFrameInstructions completelly and having
CFI_INSTRUCTION own a MCCFIInstruction, but MCCFIInstructions have non
trivial constructors and destructors and are somewhat big, so the this setup
is probably better.
The net result is that we don't create temporary labels that are never used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@203204 91177308-0d34-0410-b5e6-96231b3b80d8
The ID type for the stackmap and patchpoint intrinsics are in both cases i64.
This fixes an zero extend in the SelectionDAGBuilder that still used i32. This
also updates the target independent instructions STACKMAP and PATCHPOINT to use
the correct type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201262 91177308-0d34-0410-b5e6-96231b3b80d8
Unfortunately, the PowerPC instruction definitions make heavy use of the
positional operand encoding heuristic to map operands onto bitfield variables
in the instruction definitions. Changing this to use name-based mapping is not
trivial, however, because additional infrastructure needs to be designed to
handle mapping of complex operands (with multiple suboperands) onto multiple
bitfield variables.
In the mean time, this adds support for positionally encoded operands to
FixedLenDecoderEmitter, so that we can generate a disassembler for the PowerPC
backend. To prevent an accidental reliance on this feature, and to prevent an
undesirable interaction with existing disassemblers, a backend must opt-in to
this support by setting the new decodePositionallyEncodedOperands
instruction-set bit to true.
When enabled, this iterates the variables that contribute to the instruction
encoding, just as the encoder does, and emulates the procedure the encoder uses
to map "numbered" operands to variables. The bit range for each variable is
also determined as the encoder determines them. This map is then consulted
during the decoder-generator's loop over operands to decode, allowing the
decoder to understand both position-based and name-based operand-to-variable
mappings.
As noted in the comment on the decodePositionallyEncodedOperands definition,
this support should be removed once it is no longer needed. There should be no
change to existing disassemblers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197691 91177308-0d34-0410-b5e6-96231b3b80d8
A Direct stack map location records the address of frame index. This
address is itself the value that the runtime requested. This differs
from IndirectMemRefOp locations, which refer to a stack locations from
which the requested values must be loaded. Direct locations can
directly communicate the address if an alloca, while IndirectMemRefOp
handle register spills.
For example:
entry:
%a = alloca i64...
llvm.experimental.stackmap(i32 <ID>, i32 <shadowBytes>, i64* %a)
Since both the alloca and stackmap intrinsic are in the entry block,
and the intrinsic takes the address of the alloca, the runtime can
assume that LLVM will not substitute alloca with any intervening
value. This must be verified by the runtime by checking that the stack
map's location is a Direct location type. The runtime can then
determine the alloca's relative location on the stack immediately after
compilation, or at any time thereafter. This differs from Register and
Indirect locations, because the runtime can only read the values in
those locations when execution reaches the instruction address of the
stack map.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@195712 91177308-0d34-0410-b5e6-96231b3b80d8
The idea of the AnyReg Calling Convention is to provide the call arguments in
registers, but not to force them to be placed in a paticular order into a
specified set of registers. Instead it is up tp the register allocator to assign
any register as it sees fit. The same applies to the return value (if
applicable).
Differential Revision: http://llvm-reviews.chandlerc.com/D2009
Reviewed by Andy
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@194293 91177308-0d34-0410-b5e6-96231b3b80d8
The 'Deprecated' class allows you to specify a SubtargetFeature that the
instruction is deprecated on.
The 'ComplexDeprecationPredicate' class allows you to define a custom
predicate that is called to check for deprecation.
For example:
ComplexDeprecationPredicate<"MCR">
would mean you would have to define the following function:
bool getMCRDeprecationInfo(MCInst &MI, MCSubtargetInfo &STI,
std::string &Info)
Which returns 'false' for not deprecated, and 'true' for deprecated
and store the warning message in 'Info'.
The MCTargetAsmParser constructor was chaned to take an extra argument of
the MCInstrInfo class, so out-of-tree targets will need to be changed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190598 91177308-0d34-0410-b5e6-96231b3b80d8
Back in the mists of time (2008), it seems TableGen couldn't handle the
patterns necessary to match ARM's CMOV node that we convert select operations
to, so we wrote a lot of fairly hairy C++ to do it for us.
TableGen can deal with it now: there were a few minor differences to CodeGen
(see tests), but nothing obviously worse that I could see, so we should
probably address anything that *does* come up in a localised manner.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188995 91177308-0d34-0410-b5e6-96231b3b80d8
This patch modifies TableGen to generate a function in
${TARGET}GenInstrInfo.inc called getNamedOperandIdx(), which can be used
to look up indices for operands based on their names.
In order to activate this feature for an instruction, you must set the
UseNamedOperandTable bit.
For example, if you have an instruction like:
def ADD : TargetInstr <(outs GPR:$dst), (ins GPR:$src0, GPR:$src1)>;
You can look up the operand indices using the new function, like this:
Target::getNamedOperandIdx(Target::ADD, Target::OpName::dst) => 0
Target::getNamedOperandIdx(Target::ADD, Target::OpName::src0) => 1
Target::getNamedOperandIdx(Target::ADD, Target::OpName::src1) => 2
The operand names are case sensitive, so $dst and $DST are considered
different operands.
This change is useful for R600 which has instructions with a large number
of operands, many of which model single bit instruction configuration
values. These configuration bits are common across most instructions,
but may have a different operand index depending on the instruction type.
It is useful to have a convenient way to look up the operand indices,
so these bits can be generically set on any instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184879 91177308-0d34-0410-b5e6-96231b3b80d8
NOTE: If this broke your out-of-tree backend, in *RegisterInfo.td, change
the instances of SubRegIndex that have a comps template arg to use the
ComposedSubRegIndex class instead.
In TableGen land, this adds Size and Offset attributes to SubRegIndex,
and the ComposedSubRegIndex class, for which the Size and Offset are
computed by TableGen. This also adds an accessor in MCRegisterInfo, and
Size/Offsets for the X86 and ARM subreg indices.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183020 91177308-0d34-0410-b5e6-96231b3b80d8
variant/dialect. Addresses a FIXME in the emitMnemonicAliases function.
Use and test case to come shortly.
rdar://13688439 and part of PR13340.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179804 91177308-0d34-0410-b5e6-96231b3b80d8
Don't require instructions to inherit Sched<...>. Sometimes it is more
convenient to say:
let SchedRW = ... in {
...
}
Which is now possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177199 91177308-0d34-0410-b5e6-96231b3b80d8
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
Relationship maps are represented as InstrMapping records which are parsed by
TableGen and the information is used to construct mapping tables to represent
appropriate relations between instructions. These tables are emitted into
XXXGenInstrInfo.inc file along with the functions to query them.
Patch by Jyotsna Verma <jverma@codeaurora.org>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166685 91177308-0d34-0410-b5e6-96231b3b80d8
This Operand type takes a default argument, and is initialized to
this value if it does not appear in a patter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163315 91177308-0d34-0410-b5e6-96231b3b80d8
