wrong for volatile loads and stores. In fact this
is almost all of them! There are three types of
problems: (1) it is wrong to change the width of
a volatile memory access. These may be used to
do memory mapped i/o, in which case a load can have
an effect even if the result is not used. Consider
loading an i32 but only using the lower 8 bits. It
is wrong to change this into a load of an i8, because
you are no longer tickling the other three bytes. It
is also unwise to make a load/store wider. For
example, changing an i16 load into an i32 load is
wrong no matter how aligned things are, since the
fact of loading an additional 2 bytes can have
i/o side-effects. (2) it is wrong to change the
number of volatile load/stores: they may be counted
by the hardware. (3) it is wrong to change a volatile
load/store that requires one memory access into one
that requires several. For example on x86-32, you
can store a double in one processor operation, but to
store an i64 requires two (two i32 stores). In a
multi-threaded program you may want to bitcast an i64
to a double and store as a double because that will
occur atomically, and be indivisible to other threads.
So it would be wrong to convert the store-of-double
into a store of an i64, because this will become two
i32 stores - no longer atomic. My policy here is
to say that the number of processor operations for
an illegal operation is undefined. So it is alright
to change a store of an i64 (requires at least two
stores; but could be validly lowered to memcpy for
example) into a store of double (one processor op).
In short, if the new store is legal and has the same
size then I say that the transform is ok. It would
also be possible to say that transforms are always
ok if before they were illegal, whether after they
are illegal or not, but that's more awkward to do
and I doubt it buys us anything much.
However this exposed an interesting thing - on x86-32
a store of i64 is considered legal! That is because
operations are marked legal by default, regardless of
whether the type is legal or not. In some ways this
is clever: before type legalization this means that
operations on illegal types are considered legal;
after type legalization there are no illegal types
so now operations are only legal if they really are.
But I consider this to be too cunning for mere mortals.
Better to do things explicitly by testing AfterLegalize.
So I have changed things so that operations with illegal
types are considered illegal - indeed they can never
map to a machine operation. However this means that
the DAG combiner is more conservative because before
it was "accidentally" performing transforms where the
type was illegal because the operation was nonetheless
marked legal. So in a few such places I added a check
on AfterLegalize, which I suppose was actually just
forgotten before. This causes the DAG combiner to do
slightly more than it used to, which resulted in the X86
backend blowing up because it got a slightly surprising
node it wasn't expecting, so I tweaked it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52254 91177308-0d34-0410-b5e6-96231b3b80d8
with code that was expecting different bit widths for different values.
Make getTruncateOrZeroExtend a method on ScalarEvolution, and use it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52248 91177308-0d34-0410-b5e6-96231b3b80d8
maps can be deleted. This happens when RAUW
replaces a node N with another equivalent node
E, deleting the first node. Solve this by
adding (N, E) to ReplacedNodes, which is already
used to remap nodes to replacements. This means
that deleted nodes are being allowed in maps,
which can be delicate: the memory may be reused
for a new node which might get confused with the
old deleted node pointer hanging around in the
maps, so detect this and flush out maps if it
occurs (ExpungeNode). The expunging operation
is expensive, however it never occurs during
a llvm-gcc bootstrap or anywhere in the nightly
testsuite. It occurs three times in "make check":
Alpha/illegal-element-type.ll,
PowerPC/illegal-element-type.ll and
X86/mmx-shift.ll. If expunging proves to be too
expensive then there are other more complicated
ways of solving the problem.
In the normal case this patch adds the overhead
of a few more map lookups, which is hopefully
negligable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52214 91177308-0d34-0410-b5e6-96231b3b80d8
of integer types. Fix the isMask APInt method to
actually work (hopefully) rather than crashing
because it adds apints of different bitwidths.
It looks like isShiftedMask is also broken, but
I'm leaving that one to the APInt people (it is
not used anywhere).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52142 91177308-0d34-0410-b5e6-96231b3b80d8
of apint codegen failure is the DAG combiner doing
the wrong thing because it was comparing MVT's using
< rather than comparing the number of bits. Removing
the < method makes this mistake impossible to commit.
Instead, add helper methods for comparing bits and use
them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52098 91177308-0d34-0410-b5e6-96231b3b80d8
and better control the abstraction. Rename the type
to MVT. To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits(). Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52044 91177308-0d34-0410-b5e6-96231b3b80d8
Add a Name argment to two init methods in these classes as well to make things
a bit more consistent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51937 91177308-0d34-0410-b5e6-96231b3b80d8
are the same as in unpacked structs, only field
positions differ. This only matters for structs
containing x86 long double or an apint; it may
cause backwards compatibility problems if someone
has bitcode containing a packed struct with a
field of one of those types.
The issue is that only 10 bytes are needed to
hold an x86 long double: the store size is 10
bytes, but the ABI size is 12 or 16 bytes (linux/
darwin) which comes from rounding the store size
up by the alignment. Because it seemed silly not
to pack an x86 long double into 10 bytes in a
packed struct, this is what was done. I now
think this was a mistake. Reserving the ABI size
for an x86 long double field even in a packed
struct makes things more uniform: the ABI size is
now always used when reserving space for a type.
This means that developers are less likely to
make mistakes. It also makes life easier for the
CBE which otherwise could not represent all LLVM
packed structs (PR2402).
Front-end people might need to adjust the way
they create LLVM structs - see following change
to llvm-gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51928 91177308-0d34-0410-b5e6-96231b3b80d8
out of instcombine into a new file in libanalysis. This also teaches
ComputeNumSignBits about the number of sign bits in a constantint.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51863 91177308-0d34-0410-b5e6-96231b3b80d8
getSwappedPredicate, from ICmpInst and FCmpInst into common
methods in CmpInst. This allows CmpInsts to be manipulated
generically.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51810 91177308-0d34-0410-b5e6-96231b3b80d8
insertvalue and extractvalue to use constant indices instead of
Value* indices. And begin updating LangRef.html.
There's definately more to come here, but I'm checking this
basic support in now to make it available to people who are
interested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51806 91177308-0d34-0410-b5e6-96231b3b80d8
