Commit Graph

87 Commits

Author SHA1 Message Date
Justin Holewinski
d5c52f1d76 [NVPTX] Fix case where a sext load of an i1 type may produce an
ld.u1 instead of an ld.u8.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182924 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-30 12:22:39 +00:00
Andrew Trick
6e0b2a0cb0 Order CALLSEQ_START and CALLSEQ_END nodes.
Fixes PR16146: gdb.base__call-ar-st.exp fails after
pre-RA-sched=source fixes.

Patch by Xiaoyi Guo!

This also fixes an unsupported dbg.value test case. Codegen was
previously incorrect but the test was passing by luck.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182885 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-29 22:03:55 +00:00
Bill Wendling
cc5a882c96 Don't reach into the middle of TargetMachine and cache one of its ivars.
Not only does this break encapsulation, it's gross.


git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182876 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-29 20:37:19 +00:00
Andrew Trick
dd0fb018a7 Track IR ordering of SelectionDAG nodes 3/4.
Remove the old IR ordering mechanism and switch to new one.  Fix unit
test failures.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182704 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-25 03:08:10 +00:00
Andrew Trick
ac6d9bec67 Track IR ordering of SelectionDAG nodes 2/4.
Change SelectionDAG::getXXXNode() interfaces as well as call sites of
these functions to pass in SDLoc instead of DebugLoc.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182703 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-25 02:42:55 +00:00
Benjamin Kramer
5c35290fa3 Move passes from namespace llvm into anonymous namespaces. Sort includes while there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182594 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-23 17:10:37 +00:00
Benjamin Kramer
603100d3de More symbols that should be static.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182590 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-23 16:09:15 +00:00
Justin Holewinski
b9c26dcb24 [NVPTX] Add @llvm.nvvm.sqrt.f() intrinsic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182394 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-21 16:51:30 +00:00
Justin Holewinski
9b39c726a0 [NVPTX] Fix mis-use of CurrentFnSym in NVPTXAsmPrinter. This was causing a symbol name error in the output PTX.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182298 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-20 16:42:18 +00:00
Justin Holewinski
d223675593 [NVPTX] Add programmatic interface to NVVMReflect pass
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182297 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-20 16:42:16 +00:00
Justin Holewinski
7536ecf291 [NVPTX] Add GenericToNVVM IR converter to better handle idiomatic LLVM IR inputs
This converter currently only handles global variables in address space 0. For
these variables, they are promoted to address space 1 (global memory), and all
uses are updated to point to the result of a cvta.global instruction on the new
variable.

The motivation for this is address space 0 global variables are illegal since we
cannot declare variables in the generic address space.  Instead, we place the
variables in address space 1 and explicitly convert the pointer to address
space 0. This is primarily intended to help new users who expect to be able to
place global variables in the default address space.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182254 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-20 12:13:32 +00:00
Justin Holewinski
55fdf53629 [NVPTX] Fix i1 kernel parameters and global variables. ABI rules say we need to use .u8 for i1 parameters for kernels.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182253 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-20 12:13:28 +00:00
Matt Arsenault
225ed7069c Add LLVMContext argument to getSetCCResultType
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@182180 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-18 00:21:46 +00:00
Rafael Espindola
4a971705bc Remove the MachineMove class.
It was just a less powerful and more confusing version of
MCCFIInstruction. A side effect is that, since MCCFIInstruction uses
dwarf register numbers, calls to getDwarfRegNum are pushed out, which
should allow further simplifications.

I left the MachineModuleInfo::addFrameMove interface unchanged since
this patch was already fairly big.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181680 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-13 01:16:13 +00:00
Rafael Espindola
6e53180db1 Remove unused argument.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181618 91177308-0d34-0410-b5e6-96231b3b80d8
2013-05-10 18:16:59 +00:00
Michael Liao
2a8bea7a8e ArrayRefize getMachineNode(). No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179901 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-19 22:22:57 +00:00
Peter Collingbourne
df39be6cb4 Add support for subsections to the ELF assembler. Fixes PR8717.
Differential Revision: http://llvm-reviews.chandlerc.com/D598

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179725 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-17 21:18:16 +00:00
Justin Holewinski
d4ab1926af [NVPTX] Fix a few style issues in NVVMReflect
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178536 91177308-0d34-0410-b5e6-96231b3b80d8
2013-04-02 12:37:11 +00:00
Justin Holewinski
b24fc1c7f7 [NVPTX] Remove support for SM < 2.0. This was never fully supported anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178417 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-30 14:29:30 +00:00
Justin Holewinski
21fdcb0271 [NVPTX] Add NVVMReflect pass to allow compile-time selection of
specific code paths.

This allows us to write code like:

  if (__nvvm_reflect("FOO"))
    // Do something
  else
    // Do something else

and compile into a library, then give "FOO" a value at kernel
compile-time so the check becomes a no-op.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178416 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-30 14:29:25 +00:00
Justin Holewinski
3639ce2575 [NVPTX] Run clang-format on all NVPTX sources.
Hopefully this resolves any outstanding style issues and gives us
an automated way of ensuring we conform to the style guidelines.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178415 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-30 14:29:21 +00:00
Justin Holewinski
1ce53cb526 [NVPTX] Fix handling of vector arguments
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177847 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-24 21:17:47 +00:00
Tom Stellard
3ef5383b35 DAGCombiner: Use correct value type for checking legality of BR_CC v3
LegalizeDAG.cpp uses the value of the comparison operands when checking
the legality of BR_CC, so DAGCombiner should do the same.

v2:
  - Expand more BR_CC value types for NVPTX

v3:
  - Expand correct BR_CC value types for Hexagon, Mips, and XCore.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176694 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-08 15:36:57 +00:00
Benjamin Kramer
3853f74aba ArrayRefize some code. No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176648 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-07 20:33:29 +00:00
Michael Liao
a6b20ced76 Fix PR10475
- ISD::SHL/SRL/SRA must have either both scalar or both vector operands
  but TLI.getShiftAmountTy() so far only return scalar type. As a
  result, backend logic assuming that breaks.
- Rename the original TLI.getShiftAmountTy() to
  TLI.getScalarShiftAmountTy() and re-define TLI.getShiftAmountTy() to
  return target-specificed scalar type or the same vector type as the
  1st operand.
- Fix most TICG logic assuming TLI.getShiftAmountTy() a simple scalar
  type.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176364 91177308-0d34-0410-b5e6-96231b3b80d8
2013-03-01 18:40:30 +00:00
Eli Bendersky
700ed80d3d Move the eliminateCallFramePseudoInstr method from TargetRegisterInfo
to TargetFrameLowering, where it belongs. Incidentally, this allows us
to delete some duplicated (and slightly different!) code in TRI.

There are potentially other layering problems that can be cleaned up
as a result, or in a similar manner.

The refactoring was OK'd by Anton Korobeynikov on llvmdev.

Note: this touches the target interfaces, so out-of-tree targets may
be affected.



git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175788 91177308-0d34-0410-b5e6-96231b3b80d8
2013-02-21 20:05:00 +00:00
Jim Grosbach
3450f800aa Update TargetLowering ivars for name policy.
http://llvm.org/docs/CodingStandards.html#name-types-functions-variables-and-enumerators-properly

ivars should be camel-case and start with an upper-case letter. A few in
TargetLowering were starting with a lower-case letter.

No functional change intended.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175667 91177308-0d34-0410-b5e6-96231b3b80d8
2013-02-20 21:13:59 +00:00
Justin Holewinski
7eacad03ef [NVPTX] Disable vector registers
Vectors were being manually scalarized by the backend.  Instead,
let the target-independent code do all of the work.  The manual
scalarization was from a time before good target-independent support
for scalarization in LLVM. However, this forces us to specially-handle
vector loads and stores, which we can turn into PTX instructions that
produce/consume multiple operands.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174968 91177308-0d34-0410-b5e6-96231b3b80d8
2013-02-12 14:18:49 +00:00
Justin Holewinski
00d9da1ac4 [NVPTX] Make address space errors more explicit (llvm_unreachable -> report_fatal_error)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174808 91177308-0d34-0410-b5e6-96231b3b80d8
2013-02-09 13:34:15 +00:00
Chad Rosier
108fb3202a [PEI] Pass the frame index operand number to the eliminateFrameIndex function.
Each target implementation was needlessly recomputing the index.
Part of rdar://13076458

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174083 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-31 20:02:54 +00:00
Eli Bendersky
e752feee52 Clean up assignment of CalleeSaveStackSlotSize: get rid of the default and explicitly set this in every target that needs to change it from the default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173270 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-23 16:22:04 +00:00
Benjamin Kramer
e735945ad7 NVPTX: Stop leaking memory by using a managed constant instead of a new Argument.
This is still an egregious hack since we don't have a nice interface for this
kind of thing but should help the valgrind leak check buildbot to become green.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173267 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-23 15:21:44 +00:00
Chandler Carruth
aeef83c6af Switch TargetTransformInfo from an immutable analysis pass that requires
a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.

The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.

The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.

The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.

The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.

The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.

The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.

The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.

Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.

Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.

Commits to update DragonEgg and Clang will be made presently.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171681 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-07 01:37:14 +00:00
Chandler Carruth
0b8c9a80f2 Move all of the header files which are involved in modelling the LLVM IR
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.

There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.

The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.

I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).

I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
2013-01-02 11:36:10 +00:00
Nuno Lopes
98281a2050 convert a bunch of callers from DataLayout::getIndexedOffset() to GEP::accumulateConstantOffset().
The later API is nicer than the former, and is correct regarding wrap-around offsets (if anyone cares).
There are a few more places left with duplicated code, which I'll remove soon.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171259 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-30 16:25:48 +00:00
Bill Wendling
94e94b3506 Use the predicate methods off of AttributeSet instead of Attribute.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171257 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-30 13:50:49 +00:00
Roman Divacky
38b06020db Remove duplicate includes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170902 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-21 17:06:44 +00:00
Jakob Stoklund Olesen
28d53a26cc MachineInstrBuilderize NVPTX.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170794 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-20 22:53:53 +00:00
Bill Wendling
034b94b170 Rename the 'Attributes' class to 'Attribute'. It's going to represent a single attribute in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170502 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-19 07:18:57 +00:00
Eric Christopher
b1cc6f3dff Add a way of printing out an arbitrary label name for a section
given the section.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@170087 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-13 03:00:35 +00:00
Bill Wendling
99faa3b4ec s/AttrListPtr/AttributeSet/g to better label what this class is going to be in the near future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169651 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-07 23:16:57 +00:00
Justin Holewinski
2f1086137d [NVPTX] Fix crash with unnamed struct arguments
Patch by Eric Holk

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169418 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-05 20:50:28 +00:00
Chandler Carruth
a1514e24cc Sort includes for all of the .h files under the 'lib' tree. These were
missed in the first pass because the script didn't yet handle include
guards.

Note that the script is now able to handle all of these headers without
manual edits. =]

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169224 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-04 07:12:27 +00:00
Chandler Carruth
d04a8d4b33 Use the new script to sort the includes of every file under lib.
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.

Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169131 91177308-0d34-0410-b5e6-96231b3b80d8
2012-12-03 16:50:05 +00:00
Justin Holewinski
3d200255d5 Allow targets to prefer TypeSplitVector over TypePromoteInteger when computing the legalization method for vectors
For some targets, it is desirable to prefer scalarizing <N x i1> instead of promoting to a larger legal type, such as <N x i32>.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168882 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-29 14:26:24 +00:00
Justin Holewinski
2085d00d09 [NVPTX] Order global variables in def-use order before emiting them in the final assembly
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168198 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-16 21:03:51 +00:00
NAKAMURA Takumi
e8b0ae1fb6 NVPTXISelLowering.cpp: Fix warnings. [-Wunused-variable]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@168001 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-14 23:46:15 +00:00
Jakub Staszak
7454fc2e87 Fix invalid asserts, use llvm_unreachable instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167976 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-14 21:03:40 +00:00
Justin Holewinski
a20067b5d4 [NVPTX] Implement custom lowering of loads/stores for i1
Loads from i1 become loads from i8 followed by trunc
Stores to i1 become zext to i8 followed by store to i8

Fixes PR13291

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167948 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-14 19:19:16 +00:00
Eric Christopher
4db8833c93 Remove unused field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@167719 91177308-0d34-0410-b5e6-96231b3b80d8
2012-11-12 07:35:12 +00:00