noise.
Original commit log:
Replace some dead code with an assert. When I first ported this pass
from a loop pass to a function pass I did so in the naive, recursive
way. It doesn't actually work, we need a worklist instead. When
I switched to the worklist I didn't delete the naive recursion. That
recursion was also buggy because it was dead and never really exercised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204187 91177308-0d34-0410-b5e6-96231b3b80d8
pass from a loop pass to a function pass I did so in the naive,
recursive way. It doesn't actually work, we need a worklist instead.
When I switched to the worklist I didn't delete the naive recursion.
That recursion was also buggy because it was dead and never really
exercised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204184 91177308-0d34-0410-b5e6-96231b3b80d8
For functions where esi is used as base pointer, we would previously fall back
from lowering memcpy with "rep movs" because that clobbers esi.
With this patch, we just store esi in another physical register, and restore
it afterwards. This adds a little bit of register preassure, but the more
efficient memcpy should be worth it.
Differential Revision: http://llvm-reviews.chandlerc.com/D2968
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204174 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
X86BaseInfo.h defines an enum for the offset of each operand in a memory operand
sequence. Some code uses it and some does not. This patch replaces (hopefully)
all remaining locations where an integer literal was used instead of this enum.
No functionality change intended.
Reviewers: nadav
CC: llvm-commits, t.p.northover
Differential Revision: http://llvm-reviews.chandlerc.com/D3108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204158 91177308-0d34-0410-b5e6-96231b3b80d8
When converting a signed 32-bit integer to double-precision floating point on
hardware without a lfiwax instruction, we have to instead use a lfd followed
by fcfid. We were erroneously offsetting the address by 4 bytes in
preparation for either a lfiwax or lfiwzx when generating the lfd. This fixes
that silly error.
This was not caught in the test suite since the conversion tests were run with
-mcpu=pwr7, which implies availability of lfiwax. I've added another test
case for older hardware that checks the code we expect in the absence of
lfiwax and other flavors of fcfid. There are fewer tests in this test case
because we punt to DAG selection in more cases on older hardware. (We must
generate complex fiddly sequences in those cases, and there is marginal
benefit in duplicating that logic in fast-isel.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204155 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM part of MSan implementation of advanced origin tracking,
when we record not only creation point, but all locations where
an uninitialized value was stored to memory, too.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204151 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The compiler does not always generate linkage names. If a function
has been inlined and its body elided, its linkage name may not be
generated.
When the binary executes, the profiler will use its unmangled name
when attributing samples. This results in unmangled names in the
input profile.
We are currently failing hard when this happens. However, in this case
all that happens is that we fail to attribute samples to the inlined
function. While this means fewer optimization opportunities, it should
not cause a compilation failure.
This patch accepts all valid function names, regardless of whether
they were mangled or not.
Reviewers: chandlerc
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D3087
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204142 91177308-0d34-0410-b5e6-96231b3b80d8
The revision I'm reverting breaks handling of transitive aliases. This blocks us
and breaks sanitizer bootstrap:
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap/builds/2651
(and checked locally by Alexey).
This revision is the result of:
svn merge -r204059:204058 -r204028:204027 -r203962:203961 .
+ the regression test added to test/MC/ELF/alias.s
Another way to reproduce the regression with clang:
$ cat q.c
void a1();
void a2() __attribute__((alias("a1")));
void a3() __attribute__((alias("a2")));
void a1() {}
$ ~/work/llvm-build/bin/clang-3.5-good -c q.c && mv q.o good.o && \
~/work/llvm-build/bin/clang-3.5-bad -c q.c && mv q.o bad.o && \
objdump -t good.o bad.o
good.o: file format elf64-x86-64
SYMBOL TABLE:
0000000000000000 l df *ABS* 0000000000000000 q.c
0000000000000000 l d .text 0000000000000000 .text
0000000000000000 l d .data 0000000000000000 .data
0000000000000000 l d .bss 0000000000000000 .bss
0000000000000000 l d .comment 0000000000000000 .comment
0000000000000000 l d .note.GNU-stack 0000000000000000 .note.GNU-stack
0000000000000000 l d .eh_frame 0000000000000000 .eh_frame
0000000000000000 g F .text 0000000000000006 a1
0000000000000000 g F .text 0000000000000006 a2
0000000000000000 g F .text 0000000000000006 a3
bad.o: file format elf64-x86-64
SYMBOL TABLE:
0000000000000000 l df *ABS* 0000000000000000 q.c
0000000000000000 l d .text 0000000000000000 .text
0000000000000000 l d .data 0000000000000000 .data
0000000000000000 l d .bss 0000000000000000 .bss
0000000000000000 l d .comment 0000000000000000 .comment
0000000000000000 l d .note.GNU-stack 0000000000000000 .note.GNU-stack
0000000000000000 l d .eh_frame 0000000000000000 .eh_frame
0000000000000000 g F .text 0000000000000006 a1
0000000000000000 g F .text 0000000000000006 a2
0000000000000000 g .text 0000000000000000 a3
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204137 91177308-0d34-0410-b5e6-96231b3b80d8
Not only is it slower than the alternative, but also subtly broken.
This commit does not change the default behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204131 91177308-0d34-0410-b5e6-96231b3b80d8
Add an assertion that a valid section is referenced. The potential NULL pointer
dereference was identified by the clang static analyzer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204114 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up to r203983 based on feedback from dblaikie and mren (Thanks!)
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204107 91177308-0d34-0410-b5e6-96231b3b80d8
This allows us to catch more opportunities for ODR-based type uniquing
during LTO.
Paired commit with CFE which updates some testcases to verify the new
DIBuilder behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204106 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a slightly tighter wrapper around the header structure that
handles this use case. (MCDwarfDwoLineTable)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204101 91177308-0d34-0410-b5e6-96231b3b80d8
This removes an attribute (and more importantly, a relocation) from
skeleton type units and removes some unnecessary file names from the
debug_line section that remains in the .o (and linked executable) file.
There's still a few places we could shave off some more space here:
* use compilation dir of the underlying compilation unit (since all the
type units share that compilation dir - though this would be more
complicated in LTO cases where they don't (keep a map of compilation
dir->line table header?))
* Remove some of the unnecessary header fields from the line table since
they're not needed in this situation (about 12 bytes per table).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204099 91177308-0d34-0410-b5e6-96231b3b80d8
When emitting assembly there's no support for emitting separate line
tables for each compilation unit - so LLVM emits .loc directives
producing a single line table.
Line tables have an implicit directory (index 0) equal to the
compilation directory (DW_AT_comp_dir) of the compilation unit that
references them.
If multiple compilation units (with possibly disparate compilation
directories) reference the same line table, we must avoid relying on
this ambiguous directory.
Achieve this my simply not setting the compilation directory on the line
table when we're in this situation (multiple units while emitting
assembly).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204094 91177308-0d34-0410-b5e6-96231b3b80d8
We still do a few lookups into the line table mapping in MCContext that
could be factored out into a single lookup (rather than looking it up
once for the table label, once to set the compilation unit, once for
each time we need a file ID, etc... ) but assembly output complicates
that somewhat as we still need a virtual dispatch back to the
MCAsmStreamer in that case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204092 91177308-0d34-0410-b5e6-96231b3b80d8
Our handling of compilation directory in DwarfDebug was broken
(incorrectly using the 'last' compilation directory (that of the last
CU in the metadata list) for all function emission in any CU). By moving
this handling down into MCDwarf the issue is fixed as the compilation
dir is tracked correctly per line table.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204089 91177308-0d34-0410-b5e6-96231b3b80d8
When GlobalOpt has determined that a GlobalVariable only ever has two values,
it would convert the GlobalVariable to a boolean, and introduce SelectInsts
at every load, to choose between the two possible values. These SelectInsts
introduce overhead and other unpleasantness.
This patch makes GlobalOpt just add range metadata to loads from such
GlobalVariables instead. This enables the same main optimization (as seen in
test/Transforms/GlobalOpt/integer-bool.ll), without introducing selects.
The main downside is that it doesn't get the memory savings of shrinking such
GlobalVariables, but this is expected to be negligible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204076 91177308-0d34-0410-b5e6-96231b3b80d8
See r204027 for the precursor to this that applied to asm debug info.
This required some non-obvious API changes to handle the case of asm
output (we never go asm->asm so this didn't come up in r204027): the
modification of the file/directory name by MCDwarfLineTableHeader needed
to be reflected in the MCAsmStreamer caller so it could print the
appropriate .file directive, so those StringRef parameters are now
non-const ref (in/out) parameters rather than just const.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@204069 91177308-0d34-0410-b5e6-96231b3b80d8
