used elsewhere - an exit block is a block outside the loop branched to
from within the loop. An exiting block is a block inside the loop that
branches out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@85019 91177308-0d34-0410-b5e6-96231b3b80d8
Update all analysis passes and transforms to treat free calls just like FreeInst.
Remove RaiseAllocations and all its tests since FreeInst no longer needs to be raised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84987 91177308-0d34-0410-b5e6-96231b3b80d8
exact backedge taken count, when checking for infinite loops. This allows
it to delete loops with multiple exit conditions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84952 91177308-0d34-0410-b5e6-96231b3b80d8
Analysis/ConstantFolding.cpp. This doesn't change the behavior of
instcombine but makes other clients of ConstantFoldInstruction
able to handle loads. This was partially extracted from Eli's patch
in PR3152.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84836 91177308-0d34-0410-b5e6-96231b3b80d8
Most changes are cleanup, but there is 1 correctness fix:
I fixed InstCombine so that the icmp is removed only if the malloc call is removed (which requires explicit removal because the Worklist won't DCE any calls since they can have side-effects).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84772 91177308-0d34-0410-b5e6-96231b3b80d8
in the PHI's Basic Block. This uses a conservative approach, because we don't
have dominator info in instcombine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84754 91177308-0d34-0410-b5e6-96231b3b80d8
"In the existing code, if the load and the value to replace it with are
of different types *and* target data is available, it tries to use the
target data to coerce the replacement value to the type of the load.
Otherwise, it skips all effort to handle the type mismatch and just
feeds the wrongly-typed replacement value to replaceAllUsesWith, which
triggers an assertion.
The patch replaces it with an outer if checking for type mismatch, and
an inner if-else that checks whether target data is available and, if
not, returns false rather than trying to replace the load."
Patch by Kenneth Uildriks!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84739 91177308-0d34-0410-b5e6-96231b3b80d8
the estimated code size and the number of blocks when deciding whether to
do a non-trivial unswitch. This protects it from some very undesirable
worst-case behavior on large numbers of loop-unswitchable conditions, such
as in the testcase in PR5259.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84661 91177308-0d34-0410-b5e6-96231b3b80d8
when the invoke had multiple return values: it set the lattice value only on the
extractvalue.
This caused the invoke's lattice value to remain the default (undefined), and
later propagated to extractvalue's operand, which incorrectly introduces
undefined behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84637 91177308-0d34-0410-b5e6-96231b3b80d8
Update testcases that rely on malloc insts being present.
Also prematurely remove MallocInst handling from IndMemRemoval and RaiseAllocations to help pass tests in this incremental step.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84292 91177308-0d34-0410-b5e6-96231b3b80d8
don't bother every time going around the main worklist. This speeds up a
release-asserts opt -std-compile-opts on 403.gcc by about 4% (1.5s). It
seems to speed up the most expensive instances of instcombine by ~10%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84171 91177308-0d34-0410-b5e6-96231b3b80d8
instruction (which disqualifies stores, unreachable, etc) and at least the
first operand is a constant. This filters out a lot of obvious cases that
can't be folded. Also, switch the IRBuilder to a TargetFolder, which tries
harder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@84170 91177308-0d34-0410-b5e6-96231b3b80d8
BasicBlocks, so that it doesn't blindly procede in the presence of
large individual BasicBlocks. This addresses a class of code-size
expansion problems.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83992 91177308-0d34-0410-b5e6-96231b3b80d8
it to visit instructions from the start of the function to the
end of the function in the first path. This greatly speeds up
some pathological cases (e.g. PR5150).
Try #3, this time with some unneeded debug info stuff removed
which was causing dead pointers to be added to the worklist.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83818 91177308-0d34-0410-b5e6-96231b3b80d8
it to visit instructions from the start of the function to the
end of the function in the first path. This greatly speeds up
some pathological cases (e.g. PR5150).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83814 91177308-0d34-0410-b5e6-96231b3b80d8
into a shuffle even if it was used by another insertelement. If the
visitation order of instcombine was wrong, this would turn a chain of
insertelements into a chain of shufflevectors, which was quite painful.
Since CollectShuffleElements handles these cases, the code can just
be nuked.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83810 91177308-0d34-0410-b5e6-96231b3b80d8
input the the mul is a zext from bool, just that it is all zeros
other than the low bit. This fixes some phase ordering issues
that would cause us to miss some xforms in mul.ll when the worklist
is visited differently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83794 91177308-0d34-0410-b5e6-96231b3b80d8
it to visit instructions from the start of the function to the
end of the function in the first path. This greatly speeds up
some pathological cases (e.g. PR5150).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83790 91177308-0d34-0410-b5e6-96231b3b80d8
For now the metadata of sinked/hoisted instructions is still wrong, but that'll
be fixed when instructions will have debug metadata directly attached.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83786 91177308-0d34-0410-b5e6-96231b3b80d8
done by condprop, but do it in a much more general form. The
basic idea is that we can do a limited form of tail duplication
in the case when we have a branch on a phi. Moving the branch
up in to the predecessor block makes instruction selection
much easier and encourages chained jump threadings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83759 91177308-0d34-0410-b5e6-96231b3b80d8
from GVN, this also speeds it up, inserts fewer PHI nodes (see the
testcase) and allows it to remove more loads (due to fewer PHI nodes
standing in the way).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83746 91177308-0d34-0410-b5e6-96231b3b80d8
DemoteRegToStack. This makes it more efficient (because it isn't
creating a ton of load/stores that are eventually removed by a later
mem2reg), and more slightly more effective (because those load/stores
don't get in the way of threading).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83706 91177308-0d34-0410-b5e6-96231b3b80d8
to declare that they preserve other passes without needing to pull in
additional header file or library dependencies. Convert MachineFunctionPass
and CodeGenLICM to make use of this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83555 91177308-0d34-0410-b5e6-96231b3b80d8
already on the worklist, and print Visited when an instruction is about to be
visited. Net, on one input, this reduced the output size by at least 9x.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83510 91177308-0d34-0410-b5e6-96231b3b80d8
out of it, and jump threading, condprop and gvn are now getting
most of the benefit. This was approved by Nicholas and Nicolas.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83390 91177308-0d34-0410-b5e6-96231b3b80d8
the new predicates I added) instead of going through a context and doing a
pointer comparison. Besides being cheaper, this allows a smart compiler
to turn the if sequence into a switch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@83297 91177308-0d34-0410-b5e6-96231b3b80d8
phi nodes. Make sure to phi translate from the right block.
This fixes a llvm-building-llvm failure on GVN-PRE.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82970 91177308-0d34-0410-b5e6-96231b3b80d8
simple constants for the true/false value of the select. We now
do phi translation etc. This really fixes PR4895 :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82917 91177308-0d34-0410-b5e6-96231b3b80d8
that are phi nodes. Also tighten up FoldOpIntoPhi to treat constantexpr
operands to phis just like other variables, avoiding moving constantexpr
computations around.
Patch by Daniel Dunbar.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82913 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't kick in too much because of phi translation issues,
but this can be resolved in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82447 91177308-0d34-0410-b5e6-96231b3b80d8
from a piece of a large store when both are in the same block.
This allows clang to compile the testcase in PR4216 to this code:
_test_bitfield:
movl 4(%esp), %eax
movl %eax, %ecx
andl $-65536, %ecx
orl $32962, %eax
andl $40186, %eax
orl %ecx, %eax
ret
This is not ideal, but is a whole lot better than the code produced
by llvm-gcc:
_test_bitfield:
movw $-32574, %ax
orw 4(%esp), %ax
andw $-25350, %ax
movw %ax, 4(%esp)
movw 7(%esp), %cx
shlw $8, %cx
movzbl 6(%esp), %edx
orw %cx, %dx
movzwl %dx, %ecx
shll $16, %ecx
movzwl %ax, %eax
orl %ecx, %eax
ret
and dramatically better than that produced by gcc 4.2:
_test_bitfield:
pushl %ebx
call L3
"L00000000001$pb":
L3:
popl %ebx
movl 8(%esp), %eax
leal 0(,%eax,4), %edx
sarb $7, %dl
movl %eax, %ecx
andl $7168, %ecx
andl $-7201, %ebx
movzbl %dl, %edx
andl $1, %edx
sall $5, %edx
orl %ecx, %ebx
orl %edx, %ebx
andl $24, %eax
andl $-58336, %ebx
orl %eax, %ebx
orl $32962, %ebx
movl %ebx, %eax
popl %ebx
ret
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82439 91177308-0d34-0410-b5e6-96231b3b80d8
so that nonlocal and partially redundant loads can use it as well.
The testcase shows examples of craziness this can handle. This triggers
*many* times in 176.gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82403 91177308-0d34-0410-b5e6-96231b3b80d8
(and load -> load) when the base pointers must alias but when
they are different types. This occurs very very frequently in
176.gcc and other code that uses bitfields a lot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82399 91177308-0d34-0410-b5e6-96231b3b80d8
constants out of loops. These aren't covered by the regular LICM
pass, because in LLVM IR constants don't require separate
instructions. They're not always covered by the MachineLICM pass
either, because it doesn't know how to unfold folded constant-pool
loads. This is somewhat experimental at this point, and off by
default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82076 91177308-0d34-0410-b5e6-96231b3b80d8
phis, similar to the FoldPHIArgGEPIntoPHI change.
Also, delete some comments that don't reflect the code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82053 91177308-0d34-0410-b5e6-96231b3b80d8
more than one phi, since that leads to higher register pressure on
entry to the phi. This is especially problematic when the phi is in
a loop header, as it increases register pressure throughout the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81993 91177308-0d34-0410-b5e6-96231b3b80d8
loop exit edge -- new PHIs may be needed not only for the additional
splits that are made to preserve LoopSimplify form, but also for the
original split. Factor out the code that inserts new PHIs so that it
can be used for both. Remove LoopRotation.cpp's code for manually
updating LCSSA form, as it is now redundant. This fixes PR4934.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81363 91177308-0d34-0410-b5e6-96231b3b80d8
that get created during loop unswitching, and fix SplitBlockPredecessors'
LCSSA updating code to create new PHIs instead of trying to just move
existing ones.
Also, optimize Loop::verifyLoop, since it gets called a lot. Use
searches on a sorted list of blocks instead of calling the "contains"
function, as is done in other places in the Loop class, since "contains"
does a linear search. Also, don't call verifyLoop from LoopSimplify or
LCSSA, as the PassManager is already calling verifyLoop as part of
LoopInfo's verifyAnalysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81221 91177308-0d34-0410-b5e6-96231b3b80d8
extractelement operations into a bitcast of the pointer,
then a gep, then a scalar load. Disable this when the vector
only has one element, because it leads to infinite loops in
instcombine (PR4908).
This transformation seems like a really bad idea to me, as it
will likely disable CSE of vector load/stores etc and can be
better done in the code generator when profitable. This
goes all the way back to the first days of packed types,
r25299 specifically.
I'll let those people who care about the performance of vector
code decide what to do with this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81185 91177308-0d34-0410-b5e6-96231b3b80d8
- I think there are more instances of this, but I think they are fixed in Dan's
incoming patch. This one was preventing me from doing a bugpoint reduction
though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81103 91177308-0d34-0410-b5e6-96231b3b80d8
Constant uniquing tables. This allows distinct ConstantExpr objects
with the same operation and different flags.
Even though a ConstantExpr "a + b" is either always overflowing or
never overflowing (due to being a ConstantExpr), it's still necessary
to be able to represent it both with and without overflow flags at
the same time within the IR, because the safety of the flag may
depend on the context of the use. If the constant really does overflow,
it wouldn't ever be safe to use with the flag set, however the use
may be in code that is never actually executed.
This also makes it possible to merge all the flags tests into a single test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80998 91177308-0d34-0410-b5e6-96231b3b80d8
that these passes are properly preserved.
Fix several transformation passes that claimed to preserve LoopSimplify
form but weren't.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80926 91177308-0d34-0410-b5e6-96231b3b80d8
instead of a bool argument, and to do the dominator check itself.
This makes it eaiser to use when DominatorTree information is
available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80920 91177308-0d34-0410-b5e6-96231b3b80d8
simplifylibcalls optimization is thus valid for C++ but not C.
It's not important enough to worry about for C++ apps, so just
remove it.
rdar://7191924
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80887 91177308-0d34-0410-b5e6-96231b3b80d8
don't alias. Remove an old and poorly reduced testcase that fails
with this transform for reasons unrelated to the original test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80693 91177308-0d34-0410-b5e6-96231b3b80d8
changes: SimplifyDemandedBits can't use the builder yet because it
has the wrong insertion point. This fixes a crash building
MultiSource/Benchmarks/PAQ8p
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80537 91177308-0d34-0410-b5e6-96231b3b80d8
is itself a bitcast. Since we have gep(bitcast(bitcast(y))) in this
case, just wait for the two bitcasts to get zapped. This prevents
instcombine from confusing some aliasing stuff, and allows it to
directly eliminate the load in the testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80508 91177308-0d34-0410-b5e6-96231b3b80d8
workslist and is set to insert new instructions before the current one.
Convert a bunch of stuff that used to call InsertNewInstBefore over to
use it, greatly simplifying code and making it more natural.
There is still a lot more to go, but this is a good start.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80492 91177308-0d34-0410-b5e6-96231b3b80d8
if the operand is not an instruction.
Simplify most uses of AddOperandsToWorkList to use AddValue and
inline it into the one remaining callsite.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80488 91177308-0d34-0410-b5e6-96231b3b80d8
former looks too much like AddUsersToWorkList and keeps
confusing me.
Remove AddSoonDeadInstToWorklist and change its two callers
to do the same thing in a simpler way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80486 91177308-0d34-0410-b5e6-96231b3b80d8
into their callers. simplify ReplaceInstUsesWith. Make
EraseInstFromFunction only add operands to the worklist if
there aren't too many of them (this was a scalability win
for crazy programs that was only infrequently enforced).
Switch more code to using EraseInstFromFunction instead of
duplicating it inline. Change some fcmp/icmp optimizations
to modify fcmp/icmp in place instead of creating a new one
and deleting the old one just to change the predicate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80483 91177308-0d34-0410-b5e6-96231b3b80d8
