symbols.
Previously we have only been testing these relocations with external symbols.
<rdar://problem/18308413>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217635 91177308-0d34-0410-b5e6-96231b3b80d8
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reinstates commits r215111, 215115, 215116, 215117, 215136.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@216982 91177308-0d34-0410-b5e6-96231b3b80d8
be deleted. This will be reapplied as soon as possible and before
the 3.6 branch date at any rate.
Approved by Jim Grosbach, Lang Hames, Rafael Espindola.
This reverts commits r215111, 215115, 215116, 215117, 215136.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215154 91177308-0d34-0410-b5e6-96231b3b80d8
I am sure we will be finding bits and pieces of dead code for years to
come, but this is a good start.
Thanks to Lang Hames for making MCJIT a good replacement!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@215111 91177308-0d34-0410-b5e6-96231b3b80d8
We now (1) correctly decode the branch immediate, (2) modify the immediate to
corretly treat it as PC-rel, and (3) properly populate the stub entry.
Previously we had been doing each of these wrong.
<rdar://problem/17750739>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214285 91177308-0d34-0410-b5e6-96231b3b80d8
full paths for its first argument.
This allows us to remove the annoying sed lines in the test cases, and write
direct references to file names in stub_addr calls (rather than <filename>
placeholders).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@214211 91177308-0d34-0410-b5e6-96231b3b80d8
FIXME: "llvm-rtdyld -verify -check" is still sensitive to path separator.
Fix searching StubMap to be tolerant of both '/' and '\\' on Win32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213723 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a 'stub_addr' builtin that can be used to find the address
of the stub for a given (<file>, <section>, <symbol>) tuple. This address can be
used both to verify the contents of stubs (by loading from the returned address)
and to verify references to stubs (by comparing against the returned address).
Example (1) - Verifying stub contents:
Load 8 bytes (assuming a 64-bit target) from the stub for 'x' in the __text
section of f.o, and compare that value against the addres of 'x'.
# rtdyld-check: *{8}(stub_addr(f.o, __text, x) = x
Example (2) - Verifying references to stubs:
Decode the immediate of the instruction at label 'l', and verify that it's
equal to the offset from the next instruction's PC to the stub for 'y' in the
__text section of f.o (i.e. it's the correct PC-rel difference).
# rtdyld-check: decode_operand(l, 4) = stub_addr(f.o, __text, y) - next_pc(l)
l:
movq y@GOTPCREL(%rip), %rax
Since stub inspection requires cooperation with RuntimeDyldImpl this patch
pimpl-ifies RuntimeDyldChecker. Its implementation is moved in to a new class,
RuntimeDyldCheckerImpl, that has access to the definition of RuntimeDyldImpl.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213698 91177308-0d34-0410-b5e6-96231b3b80d8
Factor out the addend encoding into a helper function and simplify the
processRelocationRef.
Also add a few simple rtdyld tests. More tests to come once GOTs can be tested too.
Related to <rdar://problem/17768539>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213689 91177308-0d34-0410-b5e6-96231b3b80d8
RuntimeDyldChecker.
This allows us to remove one of the six remaining object files in the LLVM
source tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212780 91177308-0d34-0410-b5e6-96231b3b80d8
that have been enabled.
Without this, testers will fail when llvm-rtdyld is invoked with triples for
unsupported targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211969 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a "-verify" mode to the llvm-rtdyld utility. In verify mode,
llvm-rtdyld will test supplied expressions against the linked program images
that it creates in memory. This scheme can be used to verify the correctness
of the relocation logic applied by RuntimeDyld.
The expressions to test will be read out of files passed via the -check option
(there may be more than one of these). Expressions to check are extracted from
lines of the form:
# rtdyld-check: <expression>
This system is designed to fit the llvm-lit regression test workflow. It is
format and target agnostic, and supports verification of images linked for
remote targets. The expression language is defined in
llvm/include/llvm/RuntimeDyldChecker.h . Examples can be found in
test/ExecutionEngine/RuntimeDyld.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211956 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for several missing PPC64 relocations in the
straight-forward manner to RuntimeDyldELF.cpp.
Note that this actually fixes a failure of a large-model test case on
PowerPC, allowing the XFAIL to be removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211382 91177308-0d34-0410-b5e6-96231b3b80d8
mark the old JIT tests as unsupported for powerpc64 - CMake style.
This follows the style used for hexagon/arm64/aarch64.
The equivalent tests still run under the supported MCJIT/*
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211111 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out that not all the world is x86-64. Who knew?
I'll get to work on a more appropriate test case for this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209155 91177308-0d34-0410-b5e6-96231b3b80d8
For GOT relocations the addend should modify the offset to the
GOT entry, not the value of the entry itself. Teach RuntimeDyldMachO
to do The Right Thing here.
Fixes <rdar://problem/16961886>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@209154 91177308-0d34-0410-b5e6-96231b3b80d8
Since the ARM64 backend doesn't implement support for the old JIT those tests are failing when the regression tests are run on an AArch64 host.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207530 91177308-0d34-0410-b5e6-96231b3b80d8
Small code model (and default reloc model) set Reloc::PIC_ in this test,
and PIC is not yet supported in MCJIT for MIPS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200852 91177308-0d34-0410-b5e6-96231b3b80d8
Also replaces testcase for r180790 (support for absolute non-externs relocs)
with a more robust version.
<rdar://problem/15864721>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200404 91177308-0d34-0410-b5e6-96231b3b80d8
After all hard work to implement the EHABI and with the test-suite
passing, it's time to turn it on by default and allow users to
disable it as a work-around while we fix the eventual bugs that show
up.
This commit also remove the -arm-enable-ehabi-descriptors, since we
want the tables to be printed every time the EHABI is turned on
for non-Darwin ARM targets.
Although MCJIT EHABI is not working yet (needs linking with the right
libraries), this commit also fixes some relocations on MCJIT regarding
the EH tables/lib calls, and update some tests to avoid using EH tables
when none are needed.
The EH tests in the test-suite that were previously disabled on ARM
now pass with these changes, so a follow-up commit on the test-suite
will re-enable them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200388 91177308-0d34-0410-b5e6-96231b3b80d8
After several refactorings on the MCJIT remote communication, things are
finally looking good on Clang-compiled LLVM regarding MCJIT remote tests,
so I'm re-enabling them to see how the self-hosting buildbot behaves over
a longer period.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200102 91177308-0d34-0410-b5e6-96231b3b80d8
Disabling remote MCJIT tests on ARM again, as they're still failing when
self-hosting on ARM, despite all my tests. At least now we have more info
on what message it's breaking and what is going on. Investigating.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199310 91177308-0d34-0410-b5e6-96231b3b80d8
root path to which object files managed by the LLIObjectCache instance should be
written. This option defaults to "", in which case objects are cached in the
same directory as the bitcode they are derived from.
The load-object-a.ll test has been rewritten to use this option to support
testing in environments where the test directory is not writable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198852 91177308-0d34-0410-b5e6-96231b3b80d8
