implemented this way a long time ago and due to the overwhelming bugs
that surfaced, moved to a much more relaxed variant. Richard Smith would
like to understand the magnitude of this problem and it seems fairly
harmless to keep some flag-controlled logic to get the extremely strict
behavior here. I'll remove it if it doesn't prove useful.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202193 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, have a DataLayoutPass that holds one. This will allow parts of LLVM
don't don't handle passes to also use DataLayout.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202168 91177308-0d34-0410-b5e6-96231b3b80d8
just "load". This helps avoid pointless de-duping with order-sensitive
numbers as we already have unique names from the original load. It also
makes the resulting IR quite a bit easier to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202140 91177308-0d34-0410-b5e6-96231b3b80d8
the pointer adjustment code. This is the primary code path that creates
totally new instructions in SROA and being able to lump them based on
the pointer value's name for which they were created causes
*significantly* fewer name collisions and general noise in the debug
output. This is particularly significant because it is making it much
harder to track down instability in the output of SROA, as name
de-duplication is a totally harmless form of instability that gets in
the way of seeing real problems.
The new fancy naming scheme tries to dig out the root "pre-SROA" name
for pointer values and associate that all the way through the pointer
formation instructions. Digging out the root is important to prevent the
multiple iterative rounds of SROA from just layering too much cruft on
top of cruft here. We already track the layers of SROAs iteration in the
alloca name prefix. We don't need to duplicate it here.
Should have no functionality change, and shouldn't have any really
measurable impact on NDEBUG builds, as most of the complex logic is
debug-only.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202139 91177308-0d34-0410-b5e6-96231b3b80d8
using OldPtr more heavily. Lots of this code was written before the
rewriter had an OldPtr member setup ahead of time. There are already
asserts in place that should ensure this doesn't change any
functionality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202135 91177308-0d34-0410-b5e6-96231b3b80d8
the break statement, not just think it to yourself....
No idea how this worked at all, much less survived most bots, my
bootstrap, and some bot bootstraps!
The Polly one didn't survive, and this was filed as PR18959. I don't
have a reduced test case and honestly I'm not seeing the need. What we
probably need here are better asserts / debug-build behavior in
SmallPtrSet so that this madness doesn't make it so far.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202129 91177308-0d34-0410-b5e6-96231b3b80d8
sorting it. This helps uncover latent reliance on the original ordering
which aren't guaranteed to be preserved by std::sort (but often are),
and which are based on the use-def chain orderings which also aren't
(technically) guaranteed.
Only available in C++11 debug builds, and behind a flag to prevent noise
at the moment, but this is generally useful so figured I'd put it in the
tree rather than keeping it out-of-tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202106 91177308-0d34-0410-b5e6-96231b3b80d8
the destination operand or source operand of a memmove.
It so happens that it was impossible for SROA to try to rewrite
self-memmove where the operands are *identical*, because either such
a think is volatile (and we don't rewrite) or it is non-volatile, and we
don't even register it as a use of the alloca.
However, making the 'IsDest' test *rely* on this subtle fact is... Very
confusing for the reader. We should use the direct and readily available
test of the Use* which gives us concrete information about which operand
is being rewritten.
No functionality changed, I hope! ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202103 91177308-0d34-0410-b5e6-96231b3b80d8
ordering.
The fundamental problem that we're hitting here is that the use-def
chain ordering is *itself* not a stable thing to be relying on in the
rewriting for SROA. Further, we use a non-stable sort over the slices to
arrange them based on the section of the alloca they're operating on.
With a debugging STL implementation (or different implementations in
stage2 and stage3) this can cause stage2 != stage3.
The specific aspect of this problem fixed in this commit deals with the
rewriting and load-speculation around PHIs and Selects. This, like many
other aspects of the use-rewriting in SROA, is really part of the
"strong SSA-formation" that is doen by SROA where it works very hard to
canonicalize loads and stores in *just* the right way to satisfy the
needs of mem2reg[1]. When we have a select (or a PHI) with 2 uses of the
same alloca, we test that loads downstream of the select are
speculatable around it twice. If only one of the operands to the select
needs to be rewritten, then if we get lucky we rewrite that one first
and the select is immediately speculatable. This can cause the order of
operand visitation, and thus the order of slices to be rewritten, to
change an alloca from promotable to non-promotable and vice versa.
The fix is to defer all of the speculation until *after* the rewrite
phase is done. Once we've rewritten everything, we can accurately test
for whether speculation will work (once, instead of twice!) and the
order ceases to matter.
This also happens to simplify the other subtlety of speculation -- we
need to *not* speculate anything unless the result of speculating will
make the alloca fully promotable by mem2reg. I had a previous attempt at
simplifying this, but it was still pretty horrible.
There is actually already a *really* nice test case for this in
basictest.ll, but on multiple STL implementations and inputs, we just
got "lucky". Fortunately, the test case is very small and we can
essentially build it in exactly the opposite way to get reasonable
coverage in both directions even from normal STL implementations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202092 91177308-0d34-0410-b5e6-96231b3b80d8
After this I will set the default back to F_None. The advantage is that
before this patch forgetting to set F_Binary would corrupt a file on windows.
Forgetting to set F_Text produces one that cannot be read in notepad, which
is a better failure mode :-)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202052 91177308-0d34-0410-b5e6-96231b3b80d8
During the LTO phase LICM will move loop invariant global variables out of loops
(informed by GlobalModRef). This makes more loops countable presenting
opportunity for the loop vectorizer.
Adding the loop vectorizer improves some TSVC benchmarks and twolf/ref dataset
(5%) on x86-64.
radar://15970632
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@202051 91177308-0d34-0410-b5e6-96231b3b80d8
CodeGenPrepare uses extensively TargetLowering which is part of libLLVMCodeGen.
This is a layer violation which would introduce eventually a dependence on
CodeGen in ScalarOpts.
Move CodeGenPrepare into libLLVMCodeGen to avoid that.
Follow-up of <rdar://problem/15519855>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201912 91177308-0d34-0410-b5e6-96231b3b80d8
I am really sorry for the noise, but the current state where some parts of the
code use TD (from the old name: TargetData) and other parts use DL makes it
hard to write a patch that changes where those variables come from and how
they are passed along.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201827 91177308-0d34-0410-b5e6-96231b3b80d8
r201608 made llvm corretly handle private globals with MachO. r201622 fixed
a bug in it and r201624 and r201625 were changes for using private linkage,
assuming that llvm would do the right thing.
They all got reverted because r201608 introduced a crash in LTO. This patch
includes a fix for that. The issue was that TargetLoweringObjectFile now has
to be initialized before we can mangle names of private globals. This is
trivially true during the normal codegen pipeline (the asm printer does it),
but LTO has to do it manually.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201700 91177308-0d34-0410-b5e6-96231b3b80d8
Since r201608 got reverted, it is not safe to use private linkage in these cases
until it is committed back.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201688 91177308-0d34-0410-b5e6-96231b3b80d8
On x86, shifting a vector by a scalar is significantly cheaper than shifting a
vector by another fully general vector. Unfortunately, because SelectionDAG
operates on just one basic block at a time, the shufflevector instruction that
reveals whether the right-hand side of a shift *is* really a scalar is often
not visible to CodeGen when it's needed.
This adds another handler to CodeGenPrepare, to sink any useful shufflevector
instructions down to the basic block where they're used, predicated on a target
hook (since on other architectures, doing so will often just introduce extra
real work).
rdar://problem/16063505
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201655 91177308-0d34-0410-b5e6-96231b3b80d8
As defined in LangRef, aliases do not have sections. However, LLVM's
GlobalAlias class inherits from GlobalValue, which means we can read and
set its section. We should probably ban that as a separate change,
since it doesn't make much sense for an alias to have a section that
differs from its aliasee.
Fixes PR18757, where the section was being lost on the global in code
from Clang like:
extern "C" {
__attribute__((used, section("CUSTOM"))) static int in_custom_section;
}
Reviewers: rafael.espindola
Differential Revision: http://llvm-reviews.chandlerc.com/D2758
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201286 91177308-0d34-0410-b5e6-96231b3b80d8
logical operations on the i1's driving them. This is a bad idea for every
target I can think of (confirmed with micro tests on all of: x86-64, ARM,
AArch64, Mips, and PowerPC) because it forces the i1 to be materialized into
a general purpose register, whereas consuming it directly into a select generally
allows it to exist only transiently in a predicate or flags register.
Chandler ran a set of performance tests with this change, and reported no
measurable change on x86-64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201275 91177308-0d34-0410-b5e6-96231b3b80d8
'OK_NonUniformConstValue' to identify operands which are constants but
not constant splats.
The cost model now allows returning 'OK_NonUniformConstValue'
for non splat operands that are instances of ConstantVector or
ConstantDataVector.
With this change, targets are now able to compute different costs
for instructions with non-uniform constant operands.
For example, On X86 the cost of a vector shift may vary depending on whether
the second operand is a uniform or non-uniform constant.
This patch applies the following changes:
- The cost model computation now takes into account non-uniform constants;
- The cost of vector shift instructions has been improved in
X86TargetTransformInfo analysis pass;
- BBVectorize, SLPVectorizer and LoopVectorize now know how to distinguish
between non-uniform and uniform constant operands.
Added a new test to verify that the output of opt
'-cost-model -analyze' is valid in the following configurations: SSE2,
SSE4.1, AVX, AVX2.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201272 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes PR18753 and PR18782.
This is necessary for LICM to preserve LCSSA correctly and efficiently.
There is still some active discussion about whether we should be using
LCSSA, but we can't just immediately stop using it and we *need* LICM to
preserve it while we are using it. We can restore the old SSAUpdater
driven code if and when there is a serious effort to remove the reliance
on LCSSA from all of the loop passes.
However, this also serves as a great example of why LCSSA is very nice
to have. This change significantly simplifies the process of sinking
instructions for LICM, and makes it quite a bit less expensive.
It wouldn't even be as complex as it is except that I had to start the
process of removing the big recursive LCSSA formation hammer in order to
switch even this much of the re-forming code to asserting that LCSSA was
preserved. I'll fully remove that next just to tidy things up until the
LCSSA debate settles one way or the other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201148 91177308-0d34-0410-b5e6-96231b3b80d8
The addressing mode matcher checks at some point the profitability of folding an
instruction into the addressing mode. When the instruction to be folded has
several uses, it checks that the instruction can be folded in each use.
To do so, it creates a new matcher for each use and check if the instruction is
in the list of the matched instructions of this new matcher.
The new matchers may promote some instructions and this has to be undone to keep
the state of the original matcher consistent.
A test case will follow.
<rdar://problem/16020230>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201121 91177308-0d34-0410-b5e6-96231b3b80d8
The crux of the issue is that LCSSA doesn't preserve stateful alias
analyses. Before r200067, LICM didn't cause LCSSA to run in the LTO pass
manager, where LICM runs essentially without any of the other loop
passes. As a consequence the globalmodref-aa pass run before that loop
pass manager was able to survive the loop pass manager and be used by
DSE to eliminate stores in the function called from the loop body in
Adobe-C++/loop_unroll (and similar patterns in other benchmarks).
When LICM was taught to preserve LCSSA it had to require it as well.
This caused it to be run in the loop pass manager and because it did not
preserve AA, the stateful AA was lost. Most of LLVM's AA isn't stateful
and so this didn't manifest in most cases. Also, in most cases LCSSA was
already running, and so there was no interesting change.
The real kicker is that LCSSA by its definition (injecting PHI nodes
only) trivially preserves AA! All we need to do is mark it, and then
everything goes back to working as intended. It probably was blocking
some other weird cases of stateful AA but the only one I have is
a 1000-line IR test case from loop_unroll, so I don't really have a good
test case here.
Hopefully this fixes the regressions on performance that have been seen
since that revision.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201104 91177308-0d34-0410-b5e6-96231b3b80d8
Before conditional store vectorization/unrolling we had only one
vectorized/unrolled basic block. After adding support for conditional store
vectorization this will not only be one block but multiple basic blocks. The
last block would have the back-edge. I updated the code to use a vector of basic
blocks instead of a single basic block and fixed the users to use the last entry
in this vector. But, I forgot to add the basic blocks to this vector!
Fixes PR18724.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201028 91177308-0d34-0410-b5e6-96231b3b80d8
The bitcast instruction during constant materialization was not placed correcly
in the presence of phi nodes. This commit fixes the insertion point to be in the
idom instead.
This fixes PR18768
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201009 91177308-0d34-0410-b5e6-96231b3b80d8
This fix first traverses the whole use list of the constant expression and
keeps track of the instructions that need to be updated. Then perform the
fixup afterwards.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@201008 91177308-0d34-0410-b5e6-96231b3b80d8
mode.
Basically the idea is to transform code like this:
%idx = add nsw i32 %a, 1
%sextidx = sext i32 %idx to i64
%gep = gep i8* %myArray, i64 %sextidx
load i8* %gep
Into:
%sexta = sext i32 %a to i64
%idx = add nsw i64 %sexta, 1
%gep = gep i8* %myArray, i64 %idx
load i8* %gep
That way the computation can be folded into the addressing mode.
This transformation is done as part of the addressing mode matcher.
If the matching fails (not profitable, addressing mode not legal, etc.), the
matcher will revert the related promotions.
<rdar://problem/15519855>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200947 91177308-0d34-0410-b5e6-96231b3b80d8
225 is the default value of inline-threshold. This change will make sure
we have the same inlining behavior as prior to r200886.
As Chandler points out, even though we don't have code in our testing
suite that uses cold attribute, there are larger applications that do
use cold attribute.
r200886 + this commit intend to keep the same behavior as prior to r200886.
We can later on tune the inlinecold-threshold.
The main purpose of r200886 is to help performance of instrumentation based
PGO before we actually hook up inliner with analysis passes such as BPI and BFI.
For instrumentation based PGO, we try to increase inlining of hot functions and
reduce inlining of cold functions by setting inlinecold-threshold.
Another option suggested by Chandler is to use a boolean flag that controls
if we should use OptSizeThreshold for cold functions. The default value
of the boolean flag should not change the current behavior. But it gives us
less freedom in controlling inlining of cold functions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200898 91177308-0d34-0410-b5e6-96231b3b80d8
Ideally only those transform passes that run at -O0 remain enabled,
in reality we get as close as we reasonably can.
Passes are responsible for disabling themselves, it's not the job of
the pass manager to do it for them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200892 91177308-0d34-0410-b5e6-96231b3b80d8
Added command line option inlinecold-threshold to set threshold for inlining
functions with cold attribute. Listen to the cold attribute when it would
decrease the inline threshold.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200886 91177308-0d34-0410-b5e6-96231b3b80d8
No functional change. Updated loops from:
for (I = scc_begin(), E = scc_end(); I != E; ++I)
to:
for (I = scc_begin(); !I.isAtEnd(); ++I)
for teh win.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200789 91177308-0d34-0410-b5e6-96231b3b80d8
Add the missing transformation strchr(p, 0) -> p + strlen(p) to SimplifyLibCalls
and remove the ToDo comment.
Reviewer: Duncan P.N. Exan Smith
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200736 91177308-0d34-0410-b5e6-96231b3b80d8
It disturbs the layout of the parameters in memory and registers,
leading to problems in the backend.
The plan for optimizing internal inalloca functions going forward is to
essentially SROA the argument memory and demote any captured arguments
(things that aren't trivially written by a load or store) to an indirect
pointer to a static alloca.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200717 91177308-0d34-0410-b5e6-96231b3b80d8
LowerExpectIntrinsic previously only understood the idiom of an expect
intrinsic followed by a comparison with zero. For llvm.expect.i1, the
comparison would be stripped by the early-cse pass.
Patch by Daniel Micay.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200664 91177308-0d34-0410-b5e6-96231b3b80d8
unrolling heuristic per default
Benchmarking on x86_64 (thanks Chandler!) and ARM has shown those options speed
up some benchmarks while not causing any interesting regressions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200621 91177308-0d34-0410-b5e6-96231b3b80d8
LCSSA when we promote to SSA registers inside of LICM.
Currently, this is actually necessary. The promotion logic in LICM uses
SSAUpdater which doesn't understand how to place LCSSA PHI nodes.
Teaching it to do so would be a very significant undertaking. It may be
worthwhile and I've left a FIXME about this in the code as well as
starting a thread on llvmdev to try to figure out the right long-term
solution.
For now, the PR needs to be fixed. Short of using the promition
SSAUpdater to place both the LCSSA PHI nodes and the promoted PHI nodes,
I don't see a cleaner or cheaper way of achieving this. Fortunately,
LCSSA is relatively lazy and sparse -- it should only update
instructions which need it. We can also skip the recursive variant when
we don't promote to SSA values.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200612 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r200576. It broke 32-bit self-host builds by
vectorizing two calls to @llvm.bswap.i64, which we then fail to expand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200602 91177308-0d34-0410-b5e6-96231b3b80d8
transform accordingly. Based on similar code from Loop vectorization.
Subsequent commits will include vectorization of function calls to
vector intrinsics and form function calls to vector library calls.
Patch by Raul Silvera! (Much delayed due to my not running dcommit)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200576 91177308-0d34-0410-b5e6-96231b3b80d8
loop vectorizer to not do so when runtime pointer checks are needed and
share code with the new (not yet enabled) load/store saturation runtime
unrolling. Also ensure that we only consider the runtime checks when the
loop hasn't already been vectorized. If it has, the runtime check cost
has already been paid.
I've fleshed out a test case to cover the scalar unrolling as well as
the vector unrolling and comment clearly why we are or aren't following
the pattern.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200530 91177308-0d34-0410-b5e6-96231b3b80d8
The entry block of a function starts with all the static allocas. The change
in r195513 splits the block before those allocas, which has the effect of
turning them into dynamic allocas. That breaks all sorts of things. Change to
split after the initial allocas, and also add a comment explaining why the
block is split.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200515 91177308-0d34-0410-b5e6-96231b3b80d8
preserve loop simplify of enclosing loops.
The problem here starts with LoopRotation which ends up cloning code out
of the latch into the new preheader it is buidling. This can create
a new edge from the preheader into the exit block of the loop which
breaks LoopSimplify form. The code tries to fix this by splitting the
critical edge between the latch and the exit block to get a new exit
block that only the latch dominates. This sadly isn't sufficient.
The exit block may be an exit block for multiple nested loops. When we
clone an edge from the latch of the inner loop to the new preheader
being built in the outer loop, we create an exiting edge from the outer
loop to this exit block. Despite breaking the LoopSimplify form for the
inner loop, this is fine for the outer loop. However, when we split the
edge from the inner loop to the exit block, we create a new block which
is in neither the inner nor outer loop as the new exit block. This is
a predecessor to the old exit block, and so the split itself takes the
outer loop out of LoopSimplify form. We need to split every edge
entering the exit block from inside a loop nested more deeply than the
exit block in order to preserve all of the loop simplify constraints.
Once we try to do that, a problem with splitting critical edges
surfaces. Previously, we tried a very brute force to update LoopSimplify
form by re-computing it for all exit blocks. We don't need to do this,
and doing this much will sometimes but not always overlap with the
LoopRotate bug fix. Instead, the code needs to specifically handle the
cases which can start to violate LoopSimplify -- they aren't that
common. We need to see if the destination of the split edge was a loop
exit block in simplified form for the loop of the source of the edge.
For this to be true, all the predecessors need to be in the exact same
loop as the source of the edge being split. If the dest block was
originally in this form, we have to split all of the deges back into
this loop to recover it. The old mechanism of doing this was
conservatively correct because at least *one* of the exiting blocks it
rewrote was the DestBB and so the DestBB's predecessors were fixed. But
this is a much more targeted way of doing it. Making it targeted is
important, because ballooning the set of edges touched prevents
LoopRotate from being able to split edges *it* needs to split to
preserve loop simplify in a coherent way -- the critical edge splitting
would sometimes find the other edges in need of splitting but not
others.
Many, *many* thanks for help from Nick reducing these test cases
mightily. And helping lots with the analysis here as this one was quite
tricky to track down.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200393 91177308-0d34-0410-b5e6-96231b3b80d8
because of the inside-out run of LoopSimplify in the LoopPassManager and
the fact that LoopSimplify couldn't be "preserved" across two
independent LoopPassManagers.
Anyways, in that case, IndVars wasn't correctly preserving an LCSSA PHI
node because it thought it was rewriting (via SCEV) the incoming value
to a loop invariant value. While it may well be invariant for the
current loop, it may be rewritten in terms of an enclosing loop's
values. This in and of itself is fine, as the LCSSA PHI node in the
enclosing loop for the inner loop value we're rewriting will have its
own LCSSA PHI node if used outside of the enclosing loop. With me so
far?
Well, the current loop and the enclosing loop may share an exiting
block and exit block, and when they do they also share LCSSA PHI nodes.
In this case, its not valid to RAUW through the LCSSA PHI node.
Expected crazy test included.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200372 91177308-0d34-0410-b5e6-96231b3b80d8
When estimating register pressure, don't count the induction variable mulitple
times. It is unlikely to be unrolled. This is currently disabled and hidden
behind a flag ("enable-ind-var-reg-heur").
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200371 91177308-0d34-0410-b5e6-96231b3b80d8
When simplifycfg moves an instruction, it must drop metadata it doesn't know
is still valid with the preconditions changes. In particular, it must drop
the range and tbaa metadata.
The patch implements this with an utility function to drop all metadata not
in a white list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200322 91177308-0d34-0410-b5e6-96231b3b80d8
vectorizer, placing it behind an off-by-default flag.
It turns out that block frequency isn't what we want at all, here or
elsewhere. This has been I think a nagging feeling for several of us
working with it, but Arnold has given some really nice simple examples
where the results are so comprehensively wrong that they aren't useful.
I'm planning to email the dev list with a summary of why its not really
useful and a couple of ideas about how to better structure these types
of heuristics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200294 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I searched Transforms/ and Analysis/ for 'ByVal' and updated those call
sites to check for inalloca if appropriate.
I added tests for any change that would allow an optimization to fire on
inalloca.
Reviewers: nlewycky
Differential Revision: http://llvm-reviews.chandlerc.com/D2449
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200281 91177308-0d34-0410-b5e6-96231b3b80d8
LCSSA from it caused a crasher with the LoopUnroll pass.
This crasher is really nasty. We destroy LCSSA form in a suprising way.
When unrolling a loop into an outer loop, we not only need to restore
LCSSA form for the outer loop, but for all children of the outer loop.
This is somewhat obvious in retrospect, but hey!
While this seems pretty heavy-handed, it's not that bad. Fundamentally,
we only do this when we unroll a loop, which is already a heavyweight
operation. We're unrolling all of these hypothetical inner loops as
well, so their size and complexity is already on the critical path. This
is just adding another pass over them to re-canonicalize.
I have a test case from PR18616 that is great for reproducing this, but
pretty useless to check in as it relies on many 10s of nested empty
loops that get unrolled and deleted in just the right order. =/ What's
worse is that investigating this has exposed another source of failure
that is likely to be even harder to test. I'll try to come up with test
cases for these fixes, but I want to get the fixes into the tree first
as they're causing crashes in the wild.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200273 91177308-0d34-0410-b5e6-96231b3b80d8
The vectorizer takes a loop like this and widens all instructions except for the
store. The stores are scalarized/unrolled and hidden behind an "if" block.
for (i = 0; i < 128; ++i) {
if (a[i] < 10)
a[i] += val;
}
for (i = 0; i < 128; i+=2) {
v = a[i:i+1];
v0 = (extract v, 0) + 10;
v1 = (extract v, 1) + 10;
if (v0 < 10)
a[i] = v0;
if (v1 < 10)
a[i] = v1;
}
The vectorizer relies on subsequent optimizations to sink instructions into the
conditional block where they are anticipated.
The flag "vectorize-num-stores-pred" controls whether and how many stores to
handle this way. Vectorization of conditional stores is disabled per default for
now.
This patch also adds a change to the heuristic when the flag
"enable-loadstore-runtime-unroll" is enabled (off by default). It unrolls small
loops until load/store ports are saturated. This heuristic uses TTI's
getMaxUnrollFactor as a measure for load/store ports.
I also added a second flag -enable-cond-stores-vec. It will enable vectorization
of conditional stores. But there is no cost model for vectorization of
conditional stores in place yet so this will not do good at the moment.
rdar://15892953
Results for x86-64 -O3 -mavx +/- -mllvm -enable-loadstore-runtime-unroll
-vectorize-num-stores-pred=1 (before the BFI change):
Performance Regressions:
Benchmarks/Ptrdist/yacr2/yacr2 7.35% (maze3() is identical but 10% slower)
Applications/siod/siod 2.18%
Performance improvements:
mesa -4.42%
libquantum -4.15%
With a patch that slightly changes the register heuristics (by subtracting the
induction variable on both sides of the register pressure equation, as the
induction variable is probably not really unrolled):
Performance Regressions:
Benchmarks/Ptrdist/yacr2/yacr2 7.73%
Applications/siod/siod 1.97%
Performance Improvements:
libquantum -13.05% (we now also unroll quantum_toffoli)
mesa -4.27%
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200270 91177308-0d34-0410-b5e6-96231b3b80d8
uint32.
When folding branches to common destination, the updated branch weights
can exceed uint32 by more than factor of 2. We should keep halving the
weights until they can fit into uint32.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200262 91177308-0d34-0410-b5e6-96231b3b80d8
cold loops as-if they were being optimized for size.
Nothing fancy here. Simply test case included. The nice thing is that we
can now incrementally build on top of this to drive other heuristics.
All of the infrastructure work is done to get the profile information
into this layer.
The remaining work necessary to make this a fully general purpose loop
unroller for very hot loops is to make it a fully general purpose loop
unroller. Things I know of but am not going to have time to benchmark
and fix in the immediate future:
1) Don't disable the entire pass when the target is lacking vector
registers. This really doesn't make any sense any more.
2) Teach the unroller at least and the vectorizer potentially to handle
non-if-converted loops. This is trivial for the unroller but hard for
the vectorizer.
3) Compute the relative hotness of the loop and thread that down to the
various places that make cost tradeoffs (very likely only the
unroller makes sense here, and then only when dealing with loops that
are small enough for unrolling to not completely blow out the LSD).
I'm still dubious how useful hotness information will be. So far, my
experiments show that if we can get the correct logic for determining
when unrolling actually helps performance, the code size impact is
completely unimportant and we can unroll in all cases. But at least
we'll no longer burn code size on cold code.
One somewhat unrelated idea that I've had forever but not had time to
implement: mark all functions which are only reachable via the global
constructors rigging in the module as optsize. This would also decrease
the impact of any more aggressive heuristics here on code size.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200219 91177308-0d34-0410-b5e6-96231b3b80d8
to stabilize a test that really is trying to test generic behavior and
not a specific target's behavior.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200215 91177308-0d34-0410-b5e6-96231b3b80d8
object and fewer pointless variables.
Also, add a clarifying comment and a FIXME because the code which
disables *all* vectorization if we can't use implicit floating point
instructions just makes no sense at all.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200214 91177308-0d34-0410-b5e6-96231b3b80d8
powers of two. This is essentially always the correct thing given the
impact on alignment, scaling factors that can be used in addressing
modes, etc. Also, fix the management of the unroll vs. small loop cost
to more accurately model things with this world.
Enhance a test case to actually exercise more of the unroll machinery if
using synthetic constants rather than a specific target model. Before
this change, with the added flags this test will unroll 3 times instead
of either 2 or 4 (the two sensible answers).
While I don't expect this to make a huge difference, if there are lots
of loops sitting right on the edge of hitting the 'small unroll' factor,
they might change behavior. However, I've benchmarked moving the small
loop cost up and down in many various ways and by a huge factor (2x)
without seeing more than 0.2% code size growth. Small adjustments such
as the series that led up here have led to about 1% improvement on some
benchmarks, but it is very close to the noise floor so I mostly checked
that nothing regressed. Let me know if you see bad behavior on other
targets but I don't expect this to be a sufficiently dramatic change to
trigger anything.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200213 91177308-0d34-0410-b5e6-96231b3b80d8
with the unrolling behavior in the loop vectorizer. No functionality
changed at this point.
These are a bit hack-y, but talking with Hal, there doesn't seem to be
a cleaner way to easily experiment with different thresholds here and he
was also interested in them so I wanted to commit them. Suggestions for
improvement are very welcome here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200212 91177308-0d34-0410-b5e6-96231b3b80d8
number of vector registers rather than toggling between vector and
scalar register number based on VF. I don't have a test case as
I spotted this by inspection and on X86 it only makes a difference if
your target is lacking SSE and thus has *no* vector registers.
If someone wants to add a test case for this for ARM or somewhere else
where this is more significant, that would be awesome.
Also made the variable name a bit more sensible while I'm here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200211 91177308-0d34-0410-b5e6-96231b3b80d8
LoopVectorize pass.
The logic here doesn't make much sense. We *only* unrolled if the
unvectorized loop was a reduction loop with a single basic block *and*
small loop body. The reduction part in particular doesn't make much
sense. Instead, if we just fall through to the vectorized unroll logic
it makes more sense of unrolling if there is a vectorized reduction that
could be hacked on by the SLP vectorizer *or* if the loop is small.
This is mostly a cleanup and nothing in the test suite really exercises
this, but I did run benchmarks across this change and saw no really
significant changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200198 91177308-0d34-0410-b5e6-96231b3b80d8
a FunctionPass. With this change the loop vectorizer no longer is a loop
pass and can readily depend on function analyses. In particular, with
this change we no longer have to form a loop pass manager to run the
loop vectorizer which simplifies the entire pass management of LLVM.
The next step here is to teach the loop vectorizer to leverage profile
information through the profile information providing analysis passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200074 91177308-0d34-0410-b5e6-96231b3b80d8
the loops in a function, and teach LICM to work in the presance of
LCSSA.
Previously, LCSSA was a loop pass. That made passes requiring it also be
loop passes and unable to depend on function analysis passes easily. It
also caused outer loops to have a different "canonical" form from inner
loops during analysis. Instead, we go into LCSSA form and preserve it
through the loop pass manager run.
Note that this has the same problem as LoopSimplify that prevents
enabling its verification -- loop passes which run at the end of the loop
pass manager and don't preserve these are valid, but the subsequent loop
pass runs of outer loops that do preserve this pass trigger too much
verification and fail because the inner loop no longer verifies.
The other problem this exposed is that LICM was completely unable to
handle LCSSA form. It didn't preserve it and it actually would give up
on moving instructions in many cases when they were used by an LCSSA phi
node. I've taught LICM to support detecting LCSSA-form PHI nodes and to
hoist and sink around them. This may actually let LICM fire
significantly more because we put everything into LCSSA form to rotate
the loop before running LICM. =/ Now LICM should handle that fine and
preserve it correctly. The down side is that LICM has to require LCSSA
in order to preserve it. This is just a fact of life for LCSSA. It's
entirely possible we should completely remove LCSSA from the optimizer.
The test updates are essentially accomodating LCSSA phi nodes in the
output of LICM, and the fact that we now completely sink every
instruction in ashr-crash below the loop bodies prior to unrolling.
With this change, LCSSA is computed only three times in the pass
pipeline. One of them could be removed (and potentially a SCEV run and
a separate LoopPassManager entirely!) if we had a LoopPass variant of
InstCombine that ran InstCombine on the loop body but refused to combine
away LCSSA PHI nodes. Currently, this also prevents loop unrolling from
being in the same loop pass manager is rotate, LICM, and unswitch.
There is one thing that I *really* don't like -- preserving LCSSA in
LICM is quite expensive. We end up having to re-run LCSSA twice for some
loops after LICM runs because LICM can undo LCSSA both in the current
loop and the parent loop. I don't really see good solutions to this
other than to completely move away from LCSSA and using tools like
SSAUpdater instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200067 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r200058 and adds the using directive for
ARMTargetTransformInfo to silence two g++ overload warnings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200062 91177308-0d34-0410-b5e6-96231b3b80d8
This commit caused -Woverloaded-virtual warnings. The two new
TargetTransformInfo::getIntImmCost functions were only added to the superclass,
and to the X86 subclass. The other targets were not updated, and the
warning highlighted this by pointing out that e.g. ARMTTI::getIntImmCost was
hiding the two new getIntImmCost variants.
We could pacify the warning by adding "using TargetTransformInfo::getIntImmCost"
to the various subclasses, or turning it off, but I suspect that it's wrong to
leave the functions unimplemnted in those targets. The default implementations
return TCC_Free, which I don't think is right e.g. for ARM.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200058 91177308-0d34-0410-b5e6-96231b3b80d8
Retry commit r200022 with a fix for the build bot errors. Constant expressions
have (unlike instructions) module scope use lists and therefore may have users
in different functions. The fix is to simply ignore these out-of-function uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200034 91177308-0d34-0410-b5e6-96231b3b80d8
This pass identifies expensive constants to hoist and coalesces them to
better prepare it for SelectionDAG-based code generation. This works around the
limitations of the basic-block-at-a-time approach.
First it scans all instructions for integer constants and calculates its
cost. If the constant can be folded into the instruction (the cost is
TCC_Free) or the cost is just a simple operation (TCC_BASIC), then we don't
consider it expensive and leave it alone. This is the default behavior and
the default implementation of getIntImmCost will always return TCC_Free.
If the cost is more than TCC_BASIC, then the integer constant can't be folded
into the instruction and it might be beneficial to hoist the constant.
Similar constants are coalesced to reduce register pressure and
materialization code.
When a constant is hoisted, it is also hidden behind a bitcast to force it to
be live-out of the basic block. Otherwise the constant would be just
duplicated and each basic block would have its own copy in the SelectionDAG.
The SelectionDAG recognizes such constants as opaque and doesn't perform
certain transformations on them, which would create a new expensive constant.
This optimization is only applied to integer constants in instructions and
simple (this means not nested) constant cast experessions. For example:
%0 = load i64* inttoptr (i64 big_constant to i64*)
Reviewed by Eric
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200022 91177308-0d34-0410-b5e6-96231b3b80d8
Sweep the codebase for common typos. Includes some changes to visible function
names that were misspelt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@200018 91177308-0d34-0410-b5e6-96231b3b80d8
We completely skipped promotion in LICM if the loop has a preheader or
dedicated exits, but not *both*. We hoist if there is a preheader, and
sink if there are dedicated exits, but either hoisting or sinking can
move loop invariant code out of the loop!
I have no idea if this has a practical consequence. If anyone has ideas
for a test case, let me know.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199966 91177308-0d34-0410-b5e6-96231b3b80d8
Argument promotion can replace an argument of a call with an alloca. This
requires clearing the tail marker as it is very likely that the callee is now
using an alloca in the caller.
This fixes pr14710.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199909 91177308-0d34-0410-b5e6-96231b3b80d8
function and a FunctionPass.
This has many benefits. The motivating use case was to be able to
compute function analysis passes *after* running LoopSimplify (to avoid
invalidating them) and then to run other passes which require
LoopSimplify. Specifically passes like unrolling and vectorization are
critical to wire up to BranchProbabilityInfo and BlockFrequencyInfo so
that they can be profile aware. For the LoopVectorize pass the only
things in the way are LoopSimplify and LCSSA. This fixes LoopSimplify
and LCSSA is next on my list.
There are also a bunch of other benefits of doing this:
- It is now very feasible to make more passes *preserve* LoopSimplify
because they can simply run it after changing a loop. Because
subsequence passes can assume LoopSimplify is preserved we can reduce
the runs of this pass to the times when we actually mutate a loop
structure.
- The new pass manager should be able to more easily support loop passes
factored in this way.
- We can at long, long last observe that LoopSimplify is preserved
across SCEV. This *halves* the number of times we run LoopSimplify!!!
Now, getting here wasn't trivial. First off, the interfaces used by
LoopSimplify are all over the map regarding how analysis are updated. We
end up with weird "pass" parameters as a consequence. I'll try to clean
at least some of this up later -- I'll have to have it all clean for the
new pass manager.
Next up I discovered a really frustrating bug. LoopUnroll *claims* to
preserve LoopSimplify. That's actually a lie. But the way the
LoopPassManager ends up running the passes, it always ran LoopSimplify
on the unrolled-into loop, rectifying this oversight before any
verification could kick in and point out that in fact nothing was
preserved. So I've added code to the unroller to *actually* simplify the
surrounding loop when it succeeds at unrolling.
The only functional change in the test suite is that we now catch a case
that was previously missed because SCEV and other loop transforms see
their containing loops as simplified and thus don't miss some
opportunities. One test case has been converted to check that we catch
this case rather than checking that we miss it but at least don't get
the wrong answer.
Note that I have #if-ed out all of the verification logic in
LoopSimplify! This is a temporary workaround while extracting these bits
from the LoopPassManager. Currently, there is no way to have a pass in
the LoopPassManager which preserves LoopSimplify along with one which
does not. The LPM will try to verify on each loop in the nest that
LoopSimplify holds but the now-Function-pass cannot distinguish what
loop is being verified and so must try to verify all of them. The inner
most loop is clearly no longer simplified as there is a pass which
didn't even *attempt* to preserve it. =/ Once I get LCSSA out (and maybe
LoopVectorize and some other fixes) I'll be able to re-enable this check
and catch any places where we are still failing to preserve
LoopSimplify. If this causes problems I can back this out and try to
commit *all* of this at once, but so far this seems to work and allow
much more incremental progress.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199884 91177308-0d34-0410-b5e6-96231b3b80d8
inconsistent results for different orderings of alloca slices. The
fundamental issue is that it is just always a mistake to return early
from this function. There is no effective early exit to leverage. This
patch stops trynig to do so and simplifies the code a bit as
a consequence.
Original diagnosis and patch by James Molloy with some name tweaks by me
in part reflecting feedback from Duncan Smith on the mailing list.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199771 91177308-0d34-0410-b5e6-96231b3b80d8
This logic hadn't been updated to handle FastMathFlags, and it took me a while to detect it because it doesn't show up in a simple search for CreateFAdd.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199629 91177308-0d34-0410-b5e6-96231b3b80d8
intrinsics.
Reported on the list by Evan with a couple of attempts to fix, but it
took a while to dig down to the root cause. There are two overlapping
bugs here, both centering around the circumstance of discovering
a memcpy operand which is known to be completely outside the bounds of
the alloca.
First, we need to kill the *other* side of the memcpy if it was added to
this alloca. Otherwise we'll factor it into our slicing and try to
rewrite it even though we know for a fact that it is dead. This is made
more tricky because we can visit the sides in either order. So we have
to both kill the other side and skip instructions marked as dead. The
latter really should be goodness in every case, but here is a matter of
correctness.
Second, we need to actually remove the *uses* of the alloca by the
memcpy when queuing it for later deletion. Otherwise it may still be
using the alloca when we go to promote it (if the rewrite re-uses the
existing alloca instruction). Do this by factoring out the
use-clobbering used when for nixing a Phi argument and re-using it
across the operands of a to-be-deleted instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199590 91177308-0d34-0410-b5e6-96231b3b80d8
a reduction.
Really. Under certain circumstances (the use list of an instruction has to be
set up right - hence the extra pass in the test case) we would not recognize
when a value in a potential reduction cycle was used multiple times by the
reduction cycle.
Fixes PR18526.
radar://15851149
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199570 91177308-0d34-0410-b5e6-96231b3b80d8
When registering a pass, a pass can now specify a second construct that takes as
argument a pointer to TargetMachine.
The PassInfo class has been updated to reflect that possibility.
If such a constructor exists opt will use it instead of the default constructor
when instantiating the pass.
Since such IR passes are supposed to be rare, no specific support has been
added to this commit to allow an easy registration of such a pass.
In other words, for such pass, the initialization function has to be
hand-written (see CodeGenPrepare for instance).
Now, codegenprepare can be tested using opt:
opt -codegenprepare -mtriple=mytriple input.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199430 91177308-0d34-0410-b5e6-96231b3b80d8
flag from clang, and disable zero-base shadow support on all platforms
where it is not the default behavior.
- It is completely unused, as far as we know.
- It is ABI-incompatible with non-zero-base shadow, which means all
objects in a process must be built with the same setting. Failing to
do so results in a segmentation fault at runtime.
- It introduces a backward dependency of compiler-rt on user code,
which is uncommon and complicates testing.
This is the LLVM part of a larger change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199371 91177308-0d34-0410-b5e6-96231b3b80d8
There has been an old FIXME to find the right cut-off for when it's worth
analyzing and potentially transforming a switch to a lookup table.
The switches always have two or more cases. I could not measure any speed-up
by transforming a switch with two cases. A switch with three cases gets a nice
speed-up, and I couldn't measure any compile-time regression, so I think this
is the right threshold.
In a Clang self-host, this causes 480 new switches to be transformed,
and reduces the final binary size with 8 KB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199294 91177308-0d34-0410-b5e6-96231b3b80d8
Reapply r199191, reverted in r199197 because it carelessly broke
Other/link-opts.ll. The problem was that calling
createInternalizePass("main") would select
createInternalizePass(bool("main")) instead of
createInternalizePass(ArrayRef<const char *>("main")). This commit
fixes the bug.
The original commit message follows.
Add API to LTOCodeGenerator to specify a strategy for the -internalize
pass.
This is a new attempt at Bill's change in r185882, which he reverted in
r188029 due to problems with the gold linker. This puts the onus on the
linker to decide whether (and what) to internalize.
In particular, running internalize before outputting an object file may
change a 'weak' symbol into an internal one, even though that symbol
could be needed by an external object file --- e.g., with arclite.
This patch enables three strategies:
- LTO_INTERNALIZE_FULL: the default (and the old behaviour).
- LTO_INTERNALIZE_NONE: skip -internalize.
- LTO_INTERNALIZE_HIDDEN: only -internalize symbols with hidden
visibility.
LTO_INTERNALIZE_FULL should be used when linking an executable.
Outputting an object file (e.g., via ld -r) is more complicated, and
depends on whether hidden symbols should be internalized. E.g., for
ld -r, LTO_INTERNALIZE_NONE can be used when -keep_private_externs, and
LTO_INTERNALIZE_HIDDEN can be used otherwise. However,
LTO_INTERNALIZE_FULL is inappropriate, since the output object file will
eventually need to link with others.
lto_codegen_set_internalize_strategy() sets the strategy for subsequent
calls to lto_codegen_write_merged_modules() and lto_codegen_compile*().
<rdar://problem/14334895>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199244 91177308-0d34-0410-b5e6-96231b3b80d8
Representing dllexport/dllimport as distinct linkage types prevents using
these attributes on templates and inline functions.
Instead of introducing further mixed linkage types to include linkonce and
weak ODR, the old import/export linkage types are replaced with a new
separate visibility-like specifier:
define available_externally dllimport void @f() {}
@Var = dllexport global i32 1, align 4
Linkage for dllexported globals and functions is now equal to their linkage
without dllexport. Imported globals and functions must be either
declarations with external linkage, or definitions with
AvailableExternallyLinkage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199218 91177308-0d34-0410-b5e6-96231b3b80d8
Representing dllexport/dllimport as distinct linkage types prevents using
these attributes on templates and inline functions.
Instead of introducing further mixed linkage types to include linkonce and
weak ODR, the old import/export linkage types are replaced with a new
separate visibility-like specifier:
define available_externally dllimport void @f() {}
@Var = dllexport global i32 1, align 4
Linkage for dllexported globals and functions is now equal to their linkage
without dllexport. Imported globals and functions must be either
declarations with external linkage, or definitions with
AvailableExternallyLinkage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199204 91177308-0d34-0410-b5e6-96231b3b80d8
Add API to LTOCodeGenerator to specify a strategy for the -internalize
pass.
This is a new attempt at Bill's change in r185882, which he reverted in
r188029 due to problems with the gold linker. This puts the onus on the
linker to decide whether (and what) to internalize.
In particular, running internalize before outputting an object file may
change a 'weak' symbol into an internal one, even though that symbol
could be needed by an external object file --- e.g., with arclite.
This patch enables three strategies:
- LTO_INTERNALIZE_FULL: the default (and the old behaviour).
- LTO_INTERNALIZE_NONE: skip -internalize.
- LTO_INTERNALIZE_HIDDEN: only -internalize symbols with hidden
visibility.
LTO_INTERNALIZE_FULL should be used when linking an executable.
Outputting an object file (e.g., via ld -r) is more complicated, and
depends on whether hidden symbols should be internalized. E.g., for
ld -r, LTO_INTERNALIZE_NONE can be used when -keep_private_externs, and
LTO_INTERNALIZE_HIDDEN can be used otherwise. However,
LTO_INTERNALIZE_FULL is inappropriate, since the output object file will
eventually need to link with others.
lto_codegen_set_internalize_strategy() sets the strategy for subsequent
calls to lto_codegen_write_merged_modules() and lto_codegen_compile*().
<rdar://problem/14334895>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199191 91177308-0d34-0410-b5e6-96231b3b80d8
can be used by both the new pass manager and the old.
This removes it from any of the virtual mess of the pass interfaces and
lets it derive cleanly from the DominatorTreeBase<> template. In turn,
tons of boilerplate interface can be nuked and it turns into a very
straightforward extension of the base DominatorTree interface.
The old analysis pass is now a simple wrapper. The names and style of
this split should match the split between CallGraph and
CallGraphWrapperPass. All of the users of DominatorTree have been
updated to match using many of the same tricks as with CallGraph. The
goal is that the common type remains the resulting DominatorTree rather
than the pass. This will make subsequent work toward the new pass
manager significantly easier.
Also in numerous places things became cleaner because I switched from
re-running the pass (!!! mid way through some other passes run!!!) to
directly recomputing the domtree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199104 91177308-0d34-0410-b5e6-96231b3b80d8
trees into the Support library.
These are all expressed in terms of the generic GraphTraits and CFG,
with no reliance on any concrete IR types. Putting them in support
clarifies that and makes the fact that the static analyzer in Clang uses
them much more sane. When moving the Dominators.h file into the IR
library I claimed that this was the right home for it but not something
I planned to work on. Oops.
So why am I doing this? It happens to be one step toward breaking the
requirement that IR verification can only be performed from inside of
a pass context, which completely blocks the implementation of
verification for the new pass manager infrastructure. Fixing it will
also allow removing the concept of the "preverify" step (WTF???) and
allow the verifier to cleanly flag functions which fail verification in
a way that precludes even computing dominance information. Currently,
that results in a fatal error even when you ask the verifier to not
fatally error. It's awesome like that.
The yak shaving will continue...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199095 91177308-0d34-0410-b5e6-96231b3b80d8
directory. These passes are already defined in the IR library, and it
doesn't make any sense to have the headers in Analysis.
Long term, I think there is going to be a much better way to divide
these matters. The dominators code should be fully separated into the
abstract graph algorithm and have that put in Support where it becomes
obvious that evn Clang's CFGBlock's can use it. Then the verifier can
manually construct dominance information from the Support-driven
interface while the Analysis library can provide a pass which both
caches, reconstructs, and supports a nice update API.
But those are very long term, and so I don't want to leave the really
confusing structure until that day arrives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199082 91177308-0d34-0410-b5e6-96231b3b80d8
case when the lookup table doesn't have any holes.
This means we can build a lookup table for switches like this:
switch (x) {
case 0: return 1;
case 1: return 2;
case 2: return 3;
case 3: return 4;
default: exit(1);
}
The default case doesn't yield a constant result here, but that doesn't matter,
since a default result is only necessary for filling holes in the lookup table,
and this table doesn't have any holes.
This makes us transform 505 more switches in a clang bootstrap, and shaves 164 KB
off the resulting clang binary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@199025 91177308-0d34-0410-b5e6-96231b3b80d8
1- Use the line_iterator class to read profile files.
2- Allow comments in profile file. Lines starting with '#'
are completely ignored while reading the profile.
3- Add parsing support for discriminators and indirect call samples.
Our external profiler can emit more profile information that we are
currently not handling. This patch does not add new functionality to
support this information, but it allows profile files to provide it.
I will add actual support later on (for at least one of these
features, I need support for DWARF discriminators in Clang).
A sample line may contain the following additional information:
Discriminator. This is used if the sampled program was compiled with
DWARF discriminator support
(http://wiki.dwarfstd.org/index.php?title=Path_Discriminators). This
is currently only emitted by GCC and we just ignore it.
Potential call targets and samples. If present, this line contains a
call instruction. This models both direct and indirect calls. Each
called target is listed together with the number of samples. For
example,
130: 7 foo:3 bar:2 baz:7
The above means that at relative line offset 130 there is a call
instruction that calls one of foo(), bar() and baz(). With baz()
being the relatively more frequent call target.
Differential Revision: http://llvm-reviews.chandlerc.com/D2355
4- Simplify format of profile input file.
This implements earlier suggestions to simplify the format of the
sample profile file. The symbol table is not necessary and function
profiles do not need to know the number of samples in advance.
Differential Revision: http://llvm-reviews.chandlerc.com/D2419
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198973 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a propagation heuristic to convert instruction samples
into branch weights. It implements a similar heuristic to the one
implemented by Dehao Chen on GCC.
The propagation proceeds in 3 phases:
1- Assignment of block weights. All the basic blocks in the function
are initial assigned the same weight as their most frequently
executed instruction.
2- Creation of equivalence classes. Since samples may be missing from
blocks, we can fill in the gaps by setting the weights of all the
blocks in the same equivalence class to the same weight. To compute
the concept of equivalence, we use dominance and loop information.
Two blocks B1 and B2 are in the same equivalence class if B1
dominates B2, B2 post-dominates B1 and both are in the same loop.
3- Propagation of block weights into edges. This uses a simple
propagation heuristic. The following rules are applied to every
block B in the CFG:
- If B has a single predecessor/successor, then the weight
of that edge is the weight of the block.
- If all the edges are known except one, and the weight of the
block is already known, the weight of the unknown edge will
be the weight of the block minus the sum of all the known
edges. If the sum of all the known edges is larger than B's weight,
we set the unknown edge weight to zero.
- If there is a self-referential edge, and the weight of the block is
known, the weight for that edge is set to the weight of the block
minus the weight of the other incoming edges to that block (if
known).
Since this propagation is not guaranteed to finalize for every CFG, we
only allow it to proceed for a limited number of iterations (controlled
by -sample-profile-max-propagate-iterations). It currently uses the same
GCC default of 100.
Before propagation starts, the pass builds (for each block) a list of
unique predecessors and successors. This is necessary to handle
identical edges in multiway branches. Since we visit all blocks and all
edges of the CFG, it is cleaner to build these lists once at the start
of the pass.
Finally, the patch fixes the computation of relative line locations.
The profiler emits lines relative to the function header. To discover
it, we traverse the compilation unit looking for the subprogram
corresponding to the function. The line number of that subprogram is the
line where the function begins. That becomes line zero for all the
relative locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198972 91177308-0d34-0410-b5e6-96231b3b80d8
for (i = 0; i < N; ++i)
A[i * Stride1] += B[i * Stride2];
We take loops like this and check that the symbolic strides 'Strided1/2' are one
and drop to the scalar loop if they are not.
This is currently disabled by default and hidden behind the flag
'enable-mem-access-versioning'.
radar://13075509
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198950 91177308-0d34-0410-b5e6-96231b3b80d8
operand into the Value interface just like the core print method is.
That gives a more conistent organization to the IR printing interfaces
-- they are all attached to the IR objects themselves. Also, update all
the users.
This removes the 'Writer.h' header which contained only a single function
declaration.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198836 91177308-0d34-0410-b5e6-96231b3b80d8
are part of the core IR library in order to support dumping and other
basic functionality.
Rename the 'Assembly' include directory to 'AsmParser' to match the
library name and the only functionality left their -- printing has been
in the core IR library for quite some time.
Update all of the #includes to match.
All of this started because I wanted to have the layering in good shape
before I started adding support for printing LLVM IR using the new pass
infrastructure, and commandline support for the new pass infrastructure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198688 91177308-0d34-0410-b5e6-96231b3b80d8
subsequent changes are easier to review. About to fix some layering
issues, and wanted to separate out the necessary churn.
Also comment and sink the include of "Windows.h" in three .inc files to
match the usage in Memory.inc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198685 91177308-0d34-0410-b5e6-96231b3b80d8
This doesn't seem to have actually broken anything. It was paranoia
on my part. Trying again now that bots are more stable.
This is a follow up of the r198338 commit that added truncates for
lcssa phi nodes. Sinking the truncates below the phis cleans up the
loop and simplifies subsequent analysis within the indvars pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198678 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow up of the r198338 commit that added truncates for
lcssa phi nodes. Sinking the truncates below the phis cleans up the
loop and simplifies subsequent analysis within the indvars pass.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198654 91177308-0d34-0410-b5e6-96231b3b80d8
Now with a fix for PR18384: ValueHandleBase::ValueIsDeleted.
We need to invalidate SCEV's loop info when we delete a block, even if no values are hoisted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198631 91177308-0d34-0410-b5e6-96231b3b80d8
All other uses of this macro in LLVM/clang have been moved to the function
definition so follow suite (and the usage advice) here too for consistency.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198516 91177308-0d34-0410-b5e6-96231b3b80d8
This commit was the source of crasher PR18384:
While deleting: label %for.cond127
An asserting value handle still pointed to this value!
UNREACHABLE executed at llvm/lib/IR/Value.cpp:671!
Reverting to get the builders green, feel free to re-land after fixing up.
(Renato has a handy isolated repro if you need it.)
This reverts commit r198478.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198503 91177308-0d34-0410-b5e6-96231b3b80d8
getSCEV for an ashr instruction creates an intermediate zext
expression when it truncates its operand.
The operand is initially inside the loop, so the narrow zext
expression has a non-loop-invariant loop disposition.
LoopSimplify then runs on an outer loop, hoists the ashr operand, and
properly invalidate the SCEVs that are mapped to value.
The SCEV expression for the ashr is now an AddRec with the hoisted
value as the now loop-invariant start value.
The LoopDisposition of this wide value was properly invalidated during
LoopSimplify.
However, if we later get the ashr SCEV again, we again try to create
the intermediate zext expression. We get the same SCEV that we did
earlier, and it is still cached because it was never mapped to a
Value. When we try to create a new AddRec we abort because we're using
the old non-loop-invariant LoopDisposition.
I don't have a solution for this other than to clear LoopDisposition
when LoopSimplify hoists things.
I think the long-term strategy should be to perform LoopSimplify on
all loops before computing SCEV and before running any loop opts on
individual loops. It's possible we may want to rerun LoopSimplify on
individual loops, but it should rarely do anything, so rarely require
invalidating SCEV.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198478 91177308-0d34-0410-b5e6-96231b3b80d8
The motivation is to mark dump methods as used in debug builds so that they can
be called from lldb, but to not do so in release builds so that they can be
dead-stripped.
There's lots of potential follow-up work suggested in the thread
"Should dump methods be LLVM_ATTRIBUTE_USED only in debug builds?" on cfe-dev,
but everyone seems to agreen on this subset.
Macro name chosen by fair coin toss.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198456 91177308-0d34-0410-b5e6-96231b3b80d8
The loop rerolling pass was failing with an assertion failure from a
failed cast on loops like this:
void foo(int *A, int *B, int m, int n) {
for (int i = m; i < n; i+=4) {
A[i+0] = B[i+0] * 4;
A[i+1] = B[i+1] * 4;
A[i+2] = B[i+2] * 4;
A[i+3] = B[i+3] * 4;
}
}
The code was casting the SCEV-expanded code for the new
induction variable to a phi-node. When the loop had a non-constant
lower bound, the SCEV expander would end the code expansion with an
add insted of a phi node and the cast would fail.
It looks like the cast to a phi node was only needed to get the
induction variable value coming from the backedge to compute the end
of loop condition. This patch changes the loop reroller to compare
the induction variable to the number of times the backedge is taken
instead of the iteration count of the loop. In other words, we stop
the loop when the current value of the induction variable ==
IterationCount-1. Previously, the comparison was comparing the
induction variable value from the next iteration == IterationCount.
This problem only seems to occur on 32-bit targets. For some reason,
the loop is not rerolled on 64-bit targets.
PR18290
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198425 91177308-0d34-0410-b5e6-96231b3b80d8
As noted in the comment above CodeGenPrepare::OptimizeInst, which aggressively
sinks compares to reduce pressure on the condition register(s), for targets
such as PowerPC with multiple condition registers, this may not be the right
thing to do. This adds an HasMultipleConditionRegisters boolean to TLI, and
CodeGenPrepare::OptimizeInst is skipped when HasMultipleConditionRegisters is
true.
This functionality will be used by the PowerPC backend in an upcoming commit.
Especially when the PowerPC backend starts tracking individual condition
register bits as separate allocatable entities (which will happen in this
upcoming commit), this sinking from CodeGenPrepare::OptimizeInst is
significantly suboptimial.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198354 91177308-0d34-0410-b5e6-96231b3b80d8
When widening an IV to remove s/zext, we generally try to eliminate
the original narrow IV. However, LCSSA phi nodes outside the loop were
still using the original IV. Clean this up more aggressively to avoid
redundancy in generated code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198338 91177308-0d34-0410-b5e6-96231b3b80d8
(unittests/ExecutionEngine/JIT/CMakeLists.txt is still missing for now, since
it handles export files in a strange way: It generates a .exports file from a
.def file instead of the other way round.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@198183 91177308-0d34-0410-b5e6-96231b3b80d8
Split sadd.with.overflow into add + sadd.with.overflow to allow
analysis and optimization. This should ideally be done after
InstCombine, which can perform code motion (eventually indvars should
run after all canonical instcombines). We want ISEL to recombine the
add and the check, at least on x86.
This is currently under an option for reducing live induction
variables: -liv-reduce. The next step is reducing liveness of IVs that
are live out of the overflow check paths. Once the related
optimizations are fully developed, reviewed and tested, I do expect
this to become default.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197926 91177308-0d34-0410-b5e6-96231b3b80d8
If the Scalarizer scalarized a vector PHI but could not scalarize
all uses of it, it would insert a series of insertelements to reconstruct
the vector PHI value from the scalar ones. The problem was that it would
emit these insertelements immediately after the PHI, even if there were
other PHIs after it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197909 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change the instrumented code before Ret instructions looked like:
<Unpoison Frame Redzones>
if (Frame != OriginalFrame) // I.e. Frame is fake
<Poison Complete Frame>
Now the instrumented code looks like:
if (Frame != OriginalFrame) // I.e. Frame is fake
<Poison Complete Frame>
else
<Unpoison Frame Redzones>
Reviewers: eugenis
Reviewed By: eugenis
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2458
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197907 91177308-0d34-0410-b5e6-96231b3b80d8
If we happen to eliminate every case in a switch that has branch
weights, we currently try to create metadata for the one remaining
branch, triggering an assert. Instead, we need to check that the
metadata we're trying to create is sensible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197791 91177308-0d34-0410-b5e6-96231b3b80d8
This change fixes the case of arithmetic shift right - do not attempt to fold that case.
This change also relaxes the conditions when attempting to fold the logical shift right and shift left cases.
No additional IR-level test cases included at this time. See http://llvm.org/bugs/show_bug.cgi?id=17827 for proofs that these are correct transformations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197705 91177308-0d34-0410-b5e6-96231b3b80d8
Currently SplitBlockAndInsertIfThen requires that branch condition is an
Instruction itself, which is very inconvenient, because it is sometimes an
Operator, or even a Constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197677 91177308-0d34-0410-b5e6-96231b3b80d8
A phi node operand or an instruction operand could be a constant expression that
can trap (division). Check that we don't vectorize such cases.
PR16729
radar://15653590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197449 91177308-0d34-0410-b5e6-96231b3b80d8
GlobalOpt's CleanupConstantGlobalUsers function uses a worklist array to manage
constant users to be visited. The pointers in this array need to be weak
handles because when we delete a constant array, we may also be holding a
pointer to one of its elements (or an element of one of its elements if we're
dealing with an array of arrays) in the worklist.
Fixes PR17347.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197178 91177308-0d34-0410-b5e6-96231b3b80d8
The barrier pass is a temporary hack, and should go away soon. Nevertheless, if
we don't initialize it, then opt will not understand -barrier, and this will
break bugpoint (because when it dumps the passes from the default pass manager
-barrier will be there).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@197177 91177308-0d34-0410-b5e6-96231b3b80d8
It was failing because ASan was adding all of the following to one
function:
- dynamic alloca
- stack realignment
- inline asm
This patch avoids making the static alloca dynamic when coverage is
used.
ASan should probably not be inserting empty inline asm blobs to inhibit
duplicate tail elimination.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196973 91177308-0d34-0410-b5e6-96231b3b80d8
This avoids creating branch weight metadata of length one when we fold
cases into the default of a switch instruction, which was triggering
an assert.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196845 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes PR17872. This bug can lead to C++ destructors not being
called when they should be, when an exception is thrown.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196711 91177308-0d34-0410-b5e6-96231b3b80d8
Before this change, inlining one "invoke" into an outer "invoke" call
site can lead to the outer landingpad's catch/filter clauses being
copied multiple times into the resulting landingpad. This happens:
* when the inlined function contains multiple "resume" instructions,
because forwardResume() copies the clauses but is called multiple
times;
* when the inlined function contains a "resume" and a "call", because
HandleCallsInBlockInlinedThroughInvoke() copies the clauses but is
redundant with forwardResume().
Fix this by deduplicating the code.
This problem doesn't lead to any incorrect execution; it's only
untidy.
This change will make fixing PR17872 a little easier.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196710 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Rewrite asan's stack frame layout.
First, most of the stack layout logic is moved into a separte file
to make it more testable and (potentially) useful for other projects.
Second, make the frames more compact by using adaptive redzones
(smaller for small objects, larger for large objects).
Third, try to minimized gaps due to large alignments (this is hypothetical since
today we don't see many stack vars aligned by more than 32).
The frames indeed become more compact, but I'll still need to run more benchmarks
before committing, but I am sking for review now to get early feedback.
This change will be accompanied by a trivial change in compiler-rt tests
to match the new frame sizes.
Reviewers: samsonov, dvyukov
Reviewed By: samsonov
CC: llvm-commits
Differential Revision: http://llvm-reviews.chandlerc.com/D2324
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196568 91177308-0d34-0410-b5e6-96231b3b80d8
The intended behaviour is to force vectorization on the presence
of the flag (either turn on or off), and to continue the behaviour
as expected in its absence. Tests were added to make sure the all
cases are covered in opt. No tests were added in other tools with
the assumption that they should use the PassManagerBuilder in the
same way.
This patch also removes the outdated -late-vectorize flag, which was
on by default and not helping much.
The pragma metadata is being attached to the same place as other loop
metadata, but nothing forbids one from attaching it to a function
(to enable #pragma optimize) or basic blocks (to hint the basic-block
vectorizers), etc. The logic should be the same all around.
Patches to Clang to produce the metadata will be produced after the
initial implementation is agreed upon and committed. Patches to other
vectorizers (such as SLP and BB) will be added once we're happy with
the pass manager changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196537 91177308-0d34-0410-b5e6-96231b3b80d8
There is no reason to use std::deque here over std::vector. Thus given the
performance differences inbetween the two it makes sense to change deque to
vector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196524 91177308-0d34-0410-b5e6-96231b3b80d8
We use CSEBlocks to initialize a worklist:
SmallVector<BasicBlock *, 8> CSEWorkList(CSEBlocks.begin(), CSEBlocks.end());
so it must have a deterministic order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196520 91177308-0d34-0410-b5e6-96231b3b80d8
We were creating external uses for scalar values in MustGather entries that also
had a ScalarToTreeEntry (they also are present in a vectorized tuple). This
meant we would keep a value 'alive' as a scalar and vectorized causing havoc.
This is not necessary because when we create a MustGather vector we explicitly
create external uses entries for the insertelement instructions of the
MustGather vector elements.
Fixes PR18129.
radar://15582184
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196508 91177308-0d34-0410-b5e6-96231b3b80d8
This patch tries to avoid unrelated changes other than fixing a few
hyphen-related ambiguities and contractions in nearby lines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@196471 91177308-0d34-0410-b5e6-96231b3b80d8