kill flag.
This could cause duplicate kill flags when the same register was used twice in a
continuous sequence of STRs.
There is no small test case. <rdar://problem/8218046>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112534 91177308-0d34-0410-b5e6-96231b3b80d8
help relieve register pressure a bit. Recalculating the local address is
almost always going to be better than spilling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112503 91177308-0d34-0410-b5e6-96231b3b80d8
operand is killed, add it to the expanded instruction as an implicit kill
operand instead of marking the individual subregs with kill flags. This
should work better in general and also handles the case for VST3 where one
of the subregs was not referenced in the expanded instruction and so was
not marked killed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112494 91177308-0d34-0410-b5e6-96231b3b80d8
optional modified register (instead of reg0). Along with r112461 it will make
sure that the optional define of CPSR is marked as "def" and will thus mark the
instructions using these classes (t2ANDS*) as setting the 's' flag.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112462 91177308-0d34-0410-b5e6-96231b3b80d8
IR add/sub operations with one or both operands sign- or zero-extended.
Auto-upgrade the old intrinsics.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112416 91177308-0d34-0410-b5e6-96231b3b80d8
times. This patch causes llc and llvm-mc (which both default to
verbose-asm) to print out comments after a few common shuffle
instructions which indicates the shuffle mask, e.g.:
insertps $113, %xmm3, %xmm0 ## xmm0 = zero,xmm0[1,2],xmm3[1]
unpcklps %xmm1, %xmm0 ## xmm0 = xmm0[0],xmm1[0],xmm0[1],xmm1[1]
pshufd $1, %xmm1, %xmm1 ## xmm1 = xmm1[1,0,0,0]
This is carefully factored to keep the information extraction (of the
shuffle mask) separate from the printing logic. I plan to move the
extraction part out somewhere else at some point for other parts of
the x86 backend that want to introspect on the behavior of shuffles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112387 91177308-0d34-0410-b5e6-96231b3b80d8
when the top elements of a vector are undefined. This happens all
the time for X86-64 ABI stuff because only the low 2 elements of
a 4 element vector are defined. For example, on:
_Complex float f32(_Complex float A, _Complex float B) {
return A+B;
}
We used to produce (with SSE2, SSE4.1+ uses insertps):
_f32: ## @f32
movdqa %xmm0, %xmm2
addss %xmm1, %xmm2
pshufd $16, %xmm2, %xmm2
pshufd $1, %xmm1, %xmm1
pshufd $1, %xmm0, %xmm0
addss %xmm1, %xmm0
pshufd $16, %xmm0, %xmm1
movdqa %xmm2, %xmm0
unpcklps %xmm1, %xmm0
ret
We now produce:
_f32: ## @f32
movdqa %xmm0, %xmm2
addss %xmm1, %xmm2
pshufd $1, %xmm1, %xmm1
pshufd $1, %xmm0, %xmm3
addss %xmm1, %xmm3
movaps %xmm2, %xmm0
unpcklps %xmm3, %xmm0
ret
This implements rdar://8368414
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112378 91177308-0d34-0410-b5e6-96231b3b80d8
a new EltStride variable instead of reusing NumElems variable
for a non-obvious purpose. No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112377 91177308-0d34-0410-b5e6-96231b3b80d8
Also teach this logic how to handle target specific shuffles if
needed, this is necessary while searching recursively for zeroed
scalar elements in vector shuffle operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112348 91177308-0d34-0410-b5e6-96231b3b80d8
the special values that for ARM would be used with IB or DA modes. Fall
through and consider materializing a new base address is it would be
profitable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112329 91177308-0d34-0410-b5e6-96231b3b80d8
all the other LDM/STM instructions. This fixes asm printer crashes when
compiling with -O0. I've changed one of the NEON tests (vst3.ll) to run
with -O0 to check this in the future.
Prior to this change VLDM/VSTM used addressing mode #5, but not really.
The offset field was used to hold a count of the number of registers being
loaded or stored, and the AM5 opcode field was expanded to specify the IA
or DB mode, instead of the standard ADD/SUB specifier. Much of the backend
was not aware of these special cases. The crashes occured when rewriting
a frameindex caused the AM5 offset field to be changed so that it did not
have a valid submode. I don't know exactly what changed to expose this now.
Maybe we've never done much with -O0 and NEON. Regardless, there's no longer
any reason to keep a count of the VLDM/VSTM registers, so we can use
addressing mode #4 and clean things up in a lot of places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112322 91177308-0d34-0410-b5e6-96231b3b80d8
still having a significant effect. It shouldn't be now that the pre-RA
virtual base reg stuff is in. Assuming that's valididated by the nightly
testers, we can simplify a lot of the PEI frame index code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112220 91177308-0d34-0410-b5e6-96231b3b80d8
fix: add a flag to MapValue and friends which indicates whether
any module-level mappings are being made. In the common case of
inlining, no module-level mappings are needed, so MapValue doesn't
need to examine non-function-local metadata, which can be very
expensive in the case of a large module with really deep metadata
(e.g. a large C++ program compiled with -g).
This flag is a little awkward; perhaps eventually it can be moved
into the ClonedCodeInfo class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112190 91177308-0d34-0410-b5e6-96231b3b80d8
comparison with 0. These two pieces of code should give identical results:
rsbs r1, r1, 0
cmp r0, r1
mov r0, #0
it ls
mov r0, #1
and:
cmn r0, r1
mov r0, #0
it ls
mov r0, #1
However, the CMN gives the *opposite* result when r1 is 0. This is because the
carry flag is set in the CMP case but not in the CMN case. In short, the CMP
instruction doesn't perform a truncate of the (logical) NOT of 0 plus the value
of r0 and the carry bit (because the "carry bit" parameter to AddWithCarry is
defined as 1 in this case, the carry flag will always be set when r0 >= 0). The
CMN instruction doesn't perform a NOT of 0 so there is never a "carry" when this
AddWithCarry is performed (because the "carry bit" parameter to AddWithCarry is
defined as 0).
The AddWithCarry in the CMP case seems to be relying upon the identity:
~x + 1 = -x
However when x is 0 and unsigned, this doesn't hold:
x = 0
~x = 0xFFFF FFFF
~x + 1 = 0x1 0000 0000
(-x = 0) != (0x1 0000 0000 = ~x + 1)
Therefore, we should disable *all* versions of CMN, especially when comparing
against zero, until we can limit when the CMN instruction is used (when we know
that the RHS is not 0) or when we have a hardware fix for this.
(See the ARM docs for the "AddWithCarry" pseudo-code.)
This is related to <rdar://problem/7569620>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112176 91177308-0d34-0410-b5e6-96231b3b80d8
