with ConstantInt. This led to fixing a bug in TargetLowering.cpp
using getValue instead of getAPIntValue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56159 91177308-0d34-0410-b5e6-96231b3b80d8
cmp-and-swap reversed the Cmp and Swap arguments; comments
make it clear this is unintentional. Unfortunately, the
x86 BE had a compensating reversal, which is removed here.
PPC is OK.
From inspection of the Alpha code I think it is OK, but
if somebody has that platform please check it out. I
cannot test on that platform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@56091 91177308-0d34-0410-b5e6-96231b3b80d8
ATOMIC_LOAD_ADD_{8,16,32,64} instead of ATOMIC_LOAD_ADD.
Increased the Hardcoded Constant OpActionsCapacity to match.
Large but boring; no functional change.
This is to support partial-word atomics on ppc; i8 is
not a valid type there, so by the time we get to lowering, the
ATOMIC_LOAD nodes looks the same whether the type was i8 or i32.
The information can be added to the AtomicSDNode, but that is the
largest SDNode; I don't fully understand the SDNode allocation,
but it is sensitive to the largest node size, so increasing
that must be bad. This is the alternative.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55457 91177308-0d34-0410-b5e6-96231b3b80d8
use raw_ostream instead of std::ostream. Among other goodness,
this speeds up llvm-dis of kc++ with a release build from 0.85s
to 0.49s (88% faster).
Other interesting changes:
1) This makes Value::print be non-virtual.
2) AP[S]Int and ConstantRange can no longer print to ostream directly,
use raw_ostream instead.
3) This fixes a bug in raw_os_ostream where it didn't flush itself
when destroyed.
4) This adds a new SDNode::print method, instead of only allowing "dump".
A lot of APIs have both std::ostream and raw_ostream versions, it would
be useful to go through and systematically anihilate the std::ostream
versions.
This passes dejagnu, but there may be minor fallout, plz let me know if
so and I'll fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55263 91177308-0d34-0410-b5e6-96231b3b80d8
alignment and volatility information, such as loads and
stores, to reduce the number of integer values added to
the FoldingSetNodeID.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@55058 91177308-0d34-0410-b5e6-96231b3b80d8
which is represented in codegen as an 'and' operation. This matches them
with movz instructions, instead of leaving them to be matched by and
instructions with an immediate field.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54147 91177308-0d34-0410-b5e6-96231b3b80d8
a new ilist_node class, and remove them. Unlike alist_node,
ilist_node doesn't attempt to manage storage itself, so it avoids
the associated problems, including being opaque in gdb.
Adjust the Recycler class so that it doesn't depend on alist_node.
Also, change it to use explicit Size and Align parameters, allowing
it to work when the largest-sized node doesn't have the greatest
alignment requirement.
Change MachineInstr's MachineMemOperand list from a pool-backed
alist to a std::list for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54146 91177308-0d34-0410-b5e6-96231b3b80d8
parallel its analogue, Value::value_use_iterator. The operator* method
now returns the user, rather than the use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@54127 91177308-0d34-0410-b5e6-96231b3b80d8
replacement of multiple values. This is slightly more efficient
than doing multiple ReplaceAllUsesOfValueWith calls, and theoretically
could be optimized even further. However, an important property of this
new function is that it handles the case where the source value set and
destination value set overlap. This makes it feasible for isel to use
SelectNodeTo in many very common cases, which is advantageous because
SelectNodeTo avoids a temporary node and it doesn't require CSEMap
updates for users of values that don't change position.
Revamp MorphNodeTo, which is what does all the work of SelectNodeTo, to
handle operand lists more efficiently, and to correctly handle a number
of corner cases to which its new wider use exposes it.
This commit also includes a change to the encoding of post-isel opcodes
in SDNodes; now instead of being sandwiched between the target-independent
pre-isel opcodes and the target-dependent pre-isel opcodes, post-isel
opcodes are now represented as negative values. This makes it possible
to test if an opcode is pre-isel or post-isel without having to know
the size of the current target's post-isel instruction set.
These changes speed up llc overall by 3% and reduce memory usage by 10%
on the InstructionCombining.cpp testcase with -fast and -regalloc=local.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53728 91177308-0d34-0410-b5e6-96231b3b80d8
in Value, to make use of some otherwise unused space. Use this
field to shrink LoadSDNode and StoreSDNode by moving the
addressing mode and ext/trunc fields there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53422 91177308-0d34-0410-b5e6-96231b3b80d8
makes their special-case checks of use_size() less beneficial,
so remove them. This eliminates all but one use of use_size(),
which is in AssignTopologicalOrder, which uses it only once for
each node, and so can reasonably afford to recompute it, as
this allows the UsesSize field of SDNode to be removed
altogether.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53377 91177308-0d34-0410-b5e6-96231b3b80d8
class, and store IsVolatile and Alignment in a more compact form.
This makes AtomicSDNode slightly larger, but it shrinks LoadSDNode
and StoreSDNode, which are much more common and are the largest of
the SDNode subclasses. Also, this lets the isVolatile() and
getAlignment() accessors be non-virtual.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53361 91177308-0d34-0410-b5e6-96231b3b80d8
and reused across SelectionDAGs.
This drastically reduces the number of calls to malloc/free made during
instruction selection, and improves memory locality.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53211 91177308-0d34-0410-b5e6-96231b3b80d8
properly track dead nodes that are on the original SDNode's operand
list but not the new one, and have no other uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53201 91177308-0d34-0410-b5e6-96231b3b80d8
simple const SDOperand*, which is what's usually needed.
For AddNodeIDOperands, which is small, just duplicate the function to
accept an SDUse*.
For SelectionDAG::getNode - Add an overload that accepts SDUse* that
copies the operands into a temporary SDOperand array, but also has
special-case checks for 0 through 3 operands to avoid the copy in
the common cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@53183 91177308-0d34-0410-b5e6-96231b3b80d8
the need for a flavor operand, and add a new SDNode subclass,
LabelSDNode, for use with them to eliminate the need for a label id
operand.
Change instruction selection to let these label nodes through
unmodified instead of creating copies of them. Teach the MachineInstr
emitter how to emit a MachineInstr directly from an ISD label node.
This avoids the need for allocating SDNodes for the label id and
flavor value, as well as SDNodes for each of the post-isel label,
label id, and label flavor.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52943 91177308-0d34-0410-b5e6-96231b3b80d8
purpose, and give it a custom SDNode subclass so that it doesn't
need to have line number, column number, filename string, and
directory string, all existing as individual SDNodes to be the
operands.
This was the only user of ISD::STRING, StringSDNode, etc., so
remove those and some associated code.
This makes stop-points considerably easier to read in
-view-legalize-dags output, and reduces overhead (creating new
nodes and copying std::strings into them) on code containing
debugging information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52924 91177308-0d34-0410-b5e6-96231b3b80d8
For this it is convenient to permit floats to
be used with EXTRACT_ELEMENT, so I tweaked
things to allow that. I also added libcalls
for ppcf128 to i32 forms of FP_TO_XINT, since
they exist in libgcc and this case can certainly
occur (and does occur in the testsuite) - before
the i64 libcall was being used. Also, the
XINT_TO_FP result seemed to be wrong when
the argument is an i128: the wrong fudge
factor was added (the i32 and i64 cases were
handled directly, but the i128 code fell
through to some generic softening code which
seemed to think it was i64 to f32!). So I
fixed it by adding a fudge factor that I
found in my breakfast cereal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52739 91177308-0d34-0410-b5e6-96231b3b80d8
Added abstract class MemSDNode for any Node that have an associated MemOperand
Changed atomic.lcs => atomic.cmp.swap, atomic.las => atomic.load.add, and
atomic.lss => atomic.load.sub
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52706 91177308-0d34-0410-b5e6-96231b3b80d8
and better control the abstraction. Rename the type
to MVT. To update out-of-tree patches, the main
thing to do is to rename MVT::ValueType to MVT, and
rewrite expressions like MVT::getSizeInBits(VT) in
the form VT.getSizeInBits(). Use VT.getSimpleVT()
to extract a MVT::SimpleValueType for use in switch
statements (you will get an assert failure if VT is
an extended value type - these shouldn't exist after
type legalization).
This results in a small speedup of codegen and no
new testsuite failures (x86-64 linux).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@52044 91177308-0d34-0410-b5e6-96231b3b80d8
