directly query the function information which this set was representing.
This simplifies the interface of the inline cost analysis, and makes the
always-inline pass significantly more efficient.
Previously, always-inline would first make a single set of every
function in the module *except* those marked with the always-inline
attribute. It would then query this set at every call site to see if the
function was a member of the set, and if so, refuse to inline it. This
is quite wasteful. Instead, simply check the function attribute directly
when looking at the callsite.
The normal inliner also had similar redundancy. It added every function
in the module with the noinline attribute to its set to ignore, even
though inside the cost analysis function we *already tested* the
noinline attribute and produced the same result.
The only tricky part of removing this is that we have to be able to
correctly remove only the functions inlined by the always-inline pass
when finalizing, which requires a bit of a hack. Still, much less of
a hack than the set of all non-always-inline functions was. While I was
touching this function, I switched a heavy-weight set to a vector with
sort+unique. The algorithm already had a two-phase insert and removal
pattern, we were just needlessly paying the uniquing cost on every
insert.
This probably speeds up some compiles by a small amount (-O0 compiles
with lots of always-inline, so potentially heavy libc++ users), but I've
not tried to measure it.
I believe there is no functional change here, but yell if you spot one.
None are intended.
Finally, the direction this is going in is to greatly simplify the
inline cost query interface so that we can replace its implementation
with a much more clever one. Along the way, all the APIs get simplified,
so it seems incrementally good.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152903 91177308-0d34-0410-b5e6-96231b3b80d8
analysis implementation. The header was already separated. Also cleanup
all the comments in the header to follow a nice modern doxygen form.
There is still plenty of cruft here, but some of that will fall out in
subsequent refactorings and this was an easy step in the right
direction. No functionality changed here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152898 91177308-0d34-0410-b5e6-96231b3b80d8
These edges are not really necessary, but it is consistent with the
way we currently create physreg edges. Scheduler heuristics that
expect a DAG edge to the block terminator could benefit from this
change. Although in the future I hope we have a better mechanism for
modeling latency across scheduling regions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152895 91177308-0d34-0410-b5e6-96231b3b80d8
Only record IVUsers that are dominated by simplified loop
headers. Otherwise SCEVExpander will crash while looking for a
preheader.
I previously tried to work around this in LSR itself, but that was
insufficient. This way, LSR can continue to run if some uses are not
in simple loops, as long as we don't attempt to analyze those users.
Fixes <rdar://problem/11049788> Segmentation fault: 11 in LoopStrengthReduce
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152892 91177308-0d34-0410-b5e6-96231b3b80d8
on our internal nightly testers. So, basically revert r152486 again.
Abbreviated original commit message:
Implement a more intelligent way of spilling uses across an invoke boundary.
It looks as if Chander's inlining work, r152737, exposed an issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152887 91177308-0d34-0410-b5e6-96231b3b80d8
It caused MSP430DAGToDAGISel::SelectIndexedBinOp() to be miscompiled.
When two ReplaceUses()'s are expanded as inline, vtable in base class is stored to latter (ISelUpdater)ISU.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152877 91177308-0d34-0410-b5e6-96231b3b80d8
theoretical fix since it only matters for types with >= 2^63 bits (!) and also
only matters if pointers have more than 64 bits, which is not supported anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152831 91177308-0d34-0410-b5e6-96231b3b80d8
This needs a test, but it will take some time to figure
out the best way to get an input that will produce > 2^16 relocs.
Patch by Graydon Hoare!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152787 91177308-0d34-0410-b5e6-96231b3b80d8
out the DW_AT_name. Older gdbs unfortunately still use it to
disambiguate member functions in templated classes (gdb.cp/templates.exp).
rdar://11043421 (which is now deferred for a bit)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152782 91177308-0d34-0410-b5e6-96231b3b80d8
changed since. No one was using it. It is yet another consumer of the
InlineCost interface that I'd like to change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152769 91177308-0d34-0410-b5e6-96231b3b80d8
essentially sorting the pair's arguments. I'd love to actually call sort
here, but I'm just not that crazy. ;]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152764 91177308-0d34-0410-b5e6-96231b3b80d8
This appears to not be the case with dragonegg at least in some
contexts. Hopefully will fix the bootstrap assert failure there.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152763 91177308-0d34-0410-b5e6-96231b3b80d8
This results in things such as
vmovaps -96(%rbx), %xmm1
vinsertf128 $1, %xmm1, %ymm0, %ymm0
to be combined to
vinsertf128 $1, -96(%rbx), %ymm0, %ymm0
rdar://10643481
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152762 91177308-0d34-0410-b5e6-96231b3b80d8
correlated pairs of pointer arguments at the callsite. This is designed
to recognize the common C++ idiom of begin/end pointer pairs when the
end pointer is a constant offset from the begin pointer. With the
C-based idiom of a pointer and size, the inline cost saw the constant
size calculation, and this provides the same level of information for
begin/end pairs.
In order to propagate this information we have to search for candidate
operations on a pair of pointer function arguments (or derived from
them) which would be simplified if the pointers had a known constant
offset. Then the callsite analysis looks for such pointer pairs in the
argument list, and applies the appropriate bonus.
This helps LLVM detect that half of bounds-checked STL algorithms
(such as hash_combine_range, and some hybrid sort implementations)
disappear when inlined with a constant size input. However, it's not
a complete fix due the inaccuracy of our cost metric for constants in
general. I'm looking into that next.
Benchmarks showed no significant code size change, and very minor
performance changes. However, specific code such as hashing is showing
significantly cleaner inlining decisions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152752 91177308-0d34-0410-b5e6-96231b3b80d8
which are small enough to themselves be inlined. Delaying in this manner
can be harmful if the function is inelligible for inlining in some (or
many) contexts as it pessimizes the code of the function itself in the
event that inlining does not eventually happen.
Previously the check was written to only do this delaying of inlining
for static functions in the hope that they could be entirely deleted and
in the knowledge that all callers of static functions will have the
opportunity to inline if it is in fact profitable. However, with C++ we
get two other important sources of functions where the definition is
always available for inlining: inline functions and templated functions.
This patch generalizes the inliner to allow linkonce-ODR (the linkage
such C++ routines receive) to also qualify for this delay-based
inlining.
Benchmarking across a range of large real-world applications shows
roughly 2% size increase across the board, but an average speedup of
about 0.5%. Some benhcmarks improved over 2%, and the 'clang' binary
itself (when bootstrapped with this feature) shows a 1% -O0 performance
improvement when run over all Sema, Lex, and Parse source code smashed
into a single file. A clean re-build of Clang+LLVM with a bootstrapped
Clang shows approximately 2% improvement, but that measurement is often
noisy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152737 91177308-0d34-0410-b5e6-96231b3b80d8
There were cases where a value could be used and it's both crossing an invoke
and NOT crossing an invoke. This could happen in the landing pads. In that case,
we will demote the value to the stack like we did before.
<rdar://problem/10609139>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152705 91177308-0d34-0410-b5e6-96231b3b80d8
expensive "getFirstTerminator" call. This reduces the time of compilation in
PR12258 from >10 minutes to < 10 seconds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152704 91177308-0d34-0410-b5e6-96231b3b80d8
New flags: -misched-topdown, -misched-bottomup. They can be used with
the default scheduler or with -misched=shuffle. Without either
topdown/bottomup flag -misched=shuffle now alternates scheduling
direction.
LiveIntervals update is unimplemented with bottom-up scheduling, so
only -misched-topdown currently works.
Capped the ScheduleDAG hierarchy with a concrete ScheduleDAGMI class.
ScheduleDAGMI is aware of the top and bottom of the unscheduled zone
within the current region. Scheduling policy can be plugged into
the ScheduleDAGMI driver by implementing MachineSchedStrategy.
ConvergingScheduler is now the default scheduling algorithm.
It exercises the new driver but still does no reordering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152700 91177308-0d34-0410-b5e6-96231b3b80d8
output (we're emitting a specification already and the information
isn't changing).
Saves 1% on the debug information for a build of llvm.
Fixes rdar://11043421
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152697 91177308-0d34-0410-b5e6-96231b3b80d8
