This is how it ignores the dead code:
1) When a dead branch target, say block B, is identified, all the
blocks dominated by B is dead as well.
2) The PHIs of those blocks in dominance-frontier(B) is updated such
that the operands corresponding to dead predecessors are replaced
by "UndefVal".
Using lattice's jargon, the "UndefVal" is the "Top" in essence.
Phi node like this "phi(v1 bb1, undef xx)" will be optimized into
"v1" if v1 is constant, or v1 is an instruction which dominate this
PHI node.
3) When analyzing the availability of a load L, all dead mem-ops which
L depends on disguise as a load which evaluate exactly same value as L.
4) The dead mem-ops will be materialized as "UndefVal" during code motion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191017 91177308-0d34-0410-b5e6-96231b3b80d8
If there are no legal integers, assume 1 byte.
This makes more sense than using the pointer size as
a guess for the maximum GPR width.
It is conceivable to want to use some 64-bit pointers
on a target where 64-bit integers aren't legal.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190817 91177308-0d34-0410-b5e6-96231b3b80d8
This pass was based on the previous (essentially unused) profiling
infrastructure and the assumption that by ordering the basic blocks at
the IR level in a particular way, the correct layout would happen in the
end. This sometimes worked, and mostly didn't. It also was a really
naive implementation of the classical paper that dates from when branch
predictors were primarily directional and when loop structure wasn't
commonly available. It also didn't factor into the equation
non-fallthrough branches and other machine level details.
Anyways, for all of these reasons and more, I wrote
MachineBlockPlacement, which completely supercedes this pass. It both
uses modern profile information infrastructure, and actually works. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190748 91177308-0d34-0410-b5e6-96231b3b80d8
Allow targets to customize the default behavior of the generic loop unrolling
transformation. This will be used by the PowerPC backend when targeting the A2
core (which is in-order with a deep pipeline), and using more aggressive
defaults is important.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@190542 91177308-0d34-0410-b5e6-96231b3b80d8
Revert unintentional commit (of an unreviewed change).
Original commit message:
Add getUnrollingPreferences to TTI
Allow targets to customize the default behavior of the generic loop unrolling
transformation. This will be used by the PowerPC backend when targeting the A2
core (which is in-order with a deep pipeline), and using more aggressive
defaults is important.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189566 91177308-0d34-0410-b5e6-96231b3b80d8
Allow targets to customize the default behavior of the generic loop unrolling
transformation. This will be used by the PowerPC backend when targeting the A2
core (which is in-order with a deep pipeline), and using more aggressive
defaults is important.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189565 91177308-0d34-0410-b5e6-96231b3b80d8
...so that it can be used for z too. Most of the code is the same.
The only real change is to use TargetTransformInfo to test when a sqrt
instruction is available.
The pass is opt-in because at the moment it only handles sqrt.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@189097 91177308-0d34-0410-b5e6-96231b3b80d8
However, opt -O2 doesn't run mem2reg directly so nobody noticed until r188146
when SROA started sending more things directly down the PromoteMemToReg path.
In order to revert r187191, I also revert dependent revisions r187296, r187322
and r188146. Fixes PR16867. Does not add the testcases from that PR, but both
of them should get added for both mem2reg and sroa when this revert gets
unreverted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188327 91177308-0d34-0410-b5e6-96231b3b80d8
SROA-based analysis has enough information. This should work now that
both mem2reg *and* the SSAUpdater-based AllocaPromoter have been updated
to be able to promote the types of allocas that the SROA analysis
detects.
I've included tests for the AllocaPromoter that were only possible to
write once we fast-tracked promotable allocas without rewriting them.
This includes a test both for r187347 and r188145.
Original commit log for r187323:
"""
Now that mem2reg understands how to cope with a slightly wider set of uses of
an alloca, we can pre-compute promotability while analyzing an alloca for
splitting in SROA. That lets us short-circuit the common case of a bunch of
trivially promotable allocas. This cuts 20% to 30% off the run time of SROA for
typical frontend-generated IR sequneces I'm seeing. It gets the new SROA to
within 20% of ScalarRepl for such code. My current benchmark for these numbers
is PR15412, but it fits the general pattern of IR emitted by Clang so it should
be widely applicable.
"""
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188146 91177308-0d34-0410-b5e6-96231b3b80d8
the more general set of patterns that are now handled by mem2reg and that we
can detect quickly while doing SROA's initial analysis. Notably, this allows it
to promote through no-op bitcast and GEP sequences. A core part of the
SSAUpdater approach is the ability to test whether a particular instruction is
part of the set being promoted. Testing this becomes significantly more complex
in the world where the operand to every load and store isn't the alloca itself.
I ended up using the approach of walking up the def-chain until we find the
alloca. I benchmarked this against keeping a set of pointer operands and
keeping a set of the loads and stores we care about, and this one seemed faster
although the difference was very small.
No test case yet because currently the rewriting always "fixes" the inputs to
not require this. The next patch which re-enables early promotion of easy cases
in SROA will include a test case that specifically exercises this aspect of the
alloca promoter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188145 91177308-0d34-0410-b5e6-96231b3b80d8
our visiting datastructures in the AllocaPromoter/SSAUpdater path of
SROA. Also shift the order if clears around to be more consistent.
No functionality changed here, this is just a cleanup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188144 91177308-0d34-0410-b5e6-96231b3b80d8
It is breaking builbots with libgmalloc enabled on Mac OS X.
$ cd llvm ; mkdir release ; cd release
$ ../configure --enable-optimized —prefix=$PWD/install
$ make
$ make check
$ Release+Asserts/bin/llvm-lit -v --param use_gmalloc=1 --param \
gmalloc_path=/usr/lib/libgmalloc.dylib \
../test/Instrumentation/DataFlowSanitizer/args-unreachable-bb.ll
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188142 91177308-0d34-0410-b5e6-96231b3b80d8
This moves removeUnreachableBlocksFromFn from SimplifyCFGPass.cpp
to Utils/Local.cpp and uses it to replace the implementation of
llvm::removeUnreachableBlocks, which appears to do a strict subset
of what removeUnreachableBlocksFromFn does.
Differential Revision: http://llvm-reviews.chandlerc.com/D1334
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188119 91177308-0d34-0410-b5e6-96231b3b80d8
infrastructure to do promotion without a domtree the same smarts about
looking through GEPs, bitcasts, etc., that I just taught mem2reg about.
This way, if SROA chooses to promote an alloca which still has some
noisy instructions this code can cope with them.
I've not used as principled of an approach here for two reasons:
1) This code doesn't really need it as we were already set up to zip
through the instructions used by the alloca.
2) I view the code here as more of a hack, and hopefully a temporary one.
The SSAUpdater path in SROA is a real sore point for me. It doesn't make
a lot of architectural sense for many reasons:
- We're likely to end up needing the domtree anyways in a subsequent
pass, so why not compute it earlier and use it.
- In the future we'll likely end up needing the domtree for parts of the
inliner itself.
- If we need to we could teach the inliner to preserve the domtree. Part
of the re-work of the pass manager will allow this to be very powerful
even in large SCCs with many functions.
- Ultimately, computing a domtree has gotten significantly faster since
the original SSAUpdater-using code went into ScalarRepl. We no longer
use domfrontiers, and much of domtree is lazily done based on queries
rather than eagerly.
- At this point keeping the SSAUpdater-based promotion saves a total of
0.7% on a build of the 'opt' tool for me. That's not a lot of
performance given the complexity!
So I'm leaving this a bit ugly in the hope that eventually we just
remove all of this nonsense.
I can't even readily test this because this code isn't reachable except
through SROA. When I re-instate the patch that fast-tracks allocas
already suitable for promotion, I'll add a testcase there that failed
before this change. Before that, SROA will fix any test case I give it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187347 91177308-0d34-0410-b5e6-96231b3b80d8
uses of an alloca, we can pre-compute promotability while analyzing an
alloca for splitting in SROA. That lets us short-circuit the common case
of a bunch of trivially promotable allocas. This cuts 20% to 30% off the
run time of SROA for typical frontend-generated IR sequneces I'm seeing.
It gets the new SROA to within 20% of ScalarRepl for such code. My
current benchmark for these numbers is PR15412, but it fits the general
pattern of IR emitted by Clang so it should be widely applicable.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187323 91177308-0d34-0410-b5e6-96231b3b80d8
useful in a subsequent patch, but causes an unfortunate amount of noise,
so I pulled it out into a separate patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187322 91177308-0d34-0410-b5e6-96231b3b80d8
their being optimized out in debug mode. Realistically, this just isn't
going to be the slow part anyways. This also fixes unused variable
warnings that are breaking LLD build bots. =/ I didn't see these at
first, and kept losing track of the fact that they were broken.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187297 91177308-0d34-0410-b5e6-96231b3b80d8
Adds unit tests for it too.
Split BasicBlockUtils into an analysis-half and a transforms-half, and put the
analysis bits into a new Analysis/CFG.{h,cpp}. Promote isPotentiallyReachable
into llvm::isPotentiallyReachable and move it into Analysis/CFG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187283 91177308-0d34-0410-b5e6-96231b3b80d8
Merge consecutive if-regions if they contain identical statements.
Both transformations reduce number of branches. The transformation
is guarded by a target-hook, and is currently enabled only for +R600,
but the correctness has been tested on X86 target using a variety of
CPU benchmarks.
Patch by: Mei Ye
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187278 91177308-0d34-0410-b5e6-96231b3b80d8
schedule an alloca for another iteration in SROA. This only showed up
with a mixture of promotable and unpromotable selects and phis. Added
a test case for this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187031 91177308-0d34-0410-b5e6-96231b3b80d8
pending speculation for a phi node. The problem here is that we were
using growth of the specluation set as an indicator of whether
speculation would occur, and if the phi node is already in the set we
don't see it grow. This is a symptom of the fact that this signal is
a total hack.
Unfortunately, I couldn't really come up with a non-hacky way of
signaling that promotion remains valid *after* speculation occurs, such
that we only speculate when all else looks good for promotion. In the
end, I went with at least a much more explicit approach of doing the
work of queuing inside the phi and select processing and setting
a preposterously named flag to convey that we're in the special state of
requiring speculating before promotion.
Thanks to Richard Trieu and Nick Lewycky for the excellent work reducing
a testcase for this from a pretty giant, nasty assert in a big
application. =] The testcase was excellent.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@187029 91177308-0d34-0410-b5e6-96231b3b80d8
implementation of the SROA algorithm. We were using the term 'partition'
in many places that no longer ever represented an actual partition, but
rather just an arbitrary slice of an alloca.
No functionality change intended here. Mostly just renaming of types,
functions, variables, and rewording of comments. Several comments were
rewritten to make a lot more sense in the new structure of things.
The stats are still weird and not reflective of how this really works.
I'll fix those up in a separate patch as it is a touch more semantic of
a change...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186659 91177308-0d34-0410-b5e6-96231b3b80d8
SROA.
The crux of the issue is that now we track uses of a partition of the
alloca in two places: the iterators over the partitioning uses and the
previously collected split uses vector. We weren't accounting for the
fact that the split uses might invalidate integer widening in ways other
than due to their width (in this case due to being volatile).
Further reduced testcase added to the tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186655 91177308-0d34-0410-b5e6-96231b3b80d8
end of a vector. This was found with ASan. I've had one other report of
a crasher, but thus far been unable to reproduce the crash. It may well
be fixed with this version, and if not I'd like to get more information
from the build bots about what is happening.
See r186316 for the full commit log for the new implementation of the
SROA algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186565 91177308-0d34-0410-b5e6-96231b3b80d8
a bot.
This reverts the commit which introduced a new implementation of the
fancy SROA pass designed to reduce its overhead. I'll skip the huge
commit log here, refer to r186316 if you're looking for how this all
works and why it works that way.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186332 91177308-0d34-0410-b5e6-96231b3b80d8
different core implementation strategy.
Previously, SROA would build a relatively elaborate partitioning of an
alloca, associate uses with each partition, and then rewrite the uses of
each partition in an attempt to break apart the alloca into chunks that
could be promoted. This was very wasteful in terms of memory and compile
time because regardless of how complex the alloca or how much we're able
to do in breaking it up, all of the datastructure work to analyze the
partitioning was done up front.
The new implementation attempts to form partitions of the alloca lazily
and on the fly, rewriting the uses that make up that partition as it
goes. This has a few significant effects:
1) Much simpler data structures are used throughout.
2) No more double walk of the recursive use graph of the alloca, only
walk it once.
3) No more complex algorithms for associating a particular use with
a particular partition.
4) PHI and Select speculation is simplified and happens lazily.
5) More precise information is available about a specific use of the
alloca, removing the need for some side datastructures.
Ultimately, I think this is a much better implementation. It removes
about 300 lines of code, but arguably removes more like 500 considering
that some code grew in the process of being factored apart and cleaned
up for this all to work.
I've re-used as much of the old implementation as possible, which
includes the lion's share of code in the form of the rewriting logic.
The interesting new logic centers around how the uses of a partition are
sorted, and split into actual partitions.
Each instruction using a pointer derived from the alloca gets
a 'Partition' entry. This name is totally wrong, but I'll do a rename in
a follow-up commit as there is already enough churn here. The entry
describes the offset range accessed and the nature of the access. Once
we have all of these entries we sort them in a very specific way:
increasing order of begin offset, followed by whether they are
splittable uses (memcpy, etc), followed by the end offset or whatever.
Sorting by splittability is important as it simplifies the collection of
uses into a partition.
Once we have these uses sorted, we walk from the beginning to the end
building up a range of uses that form a partition of the alloca.
Overlapping unsplittable uses are merged into a single partition while
splittable uses are broken apart and carried from one partition to the
next. A partition is also introduced to bridge splittable uses between
the unsplittable regions when necessary.
I've looked at the performance PRs fairly closely. PR15471 no longer
will even load (the module is invalid). Not sure what is up there.
PR15412 improves by between 5% and 10%, however it is nearly impossible
to know what is holding it up as SROA (the entire pass) takes less time
than reading the IR for that test case. The analysis takes the same time
as running mem2reg on the final allocas. I suspect (without much
evidence) that the new implementation will scale much better however,
and it is just the small nature of the test cases that makes the changes
small and noisy. Either way, it is still simpler and cleaner I think.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186316 91177308-0d34-0410-b5e6-96231b3b80d8
against a constant."
This reverts commit r186107. It didn't handle wrapping arithmetic in the
loop correctly and thus caused the following C program to count from
0 to UINT64_MAX instead of from 0 to 255 as intended:
#include <stdio.h>
int main() {
unsigned char first = 0, last = 255;
do { printf("%d\n", first); } while (first++ != last);
}
Full test case and instructions to reproduce with just the -indvars pass
sent to the original review thread rather than to r186107's commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186152 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Michele Scandale!
Adds a special handling of the case where, during the loop exit
condition rewriting, the exit value is a constant of bitwidth lower
than the type of the induction variable: instead of introducing a
trunc operation in order to match correctly the operand types, it
allows to convert the constant value to an equivalent constant,
depending on the initial value of the induction variable and the trip
count, in order have an equivalent comparison between the induction
variable and the new constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186107 91177308-0d34-0410-b5e6-96231b3b80d8
Without the changes introduced into this patch, if TRE saw any allocas at all,
TRE would not perform TRE *or* mark callsites with the tail marker.
Because TRE runs after mem2reg, this inadequacy is not a death sentence. But
given a callsite A without escaping alloca argument, A may not be able to have
the tail marker placed on it due to a separate callsite B having a write-back
parameter passed in via an argument with the nocapture attribute.
Assume that B is the only other callsite besides A and B only has nocapture
escaping alloca arguments (*NOTE* B may have other arguments that are not passed
allocas). In this case not marking A with the tail marker is unnecessarily
conservative since:
1. By assumption A has no escaping alloca arguments itself so it can not
access the caller's stack via its arguments.
2. Since all of B's escaping alloca arguments are passed as parameters with
the nocapture attribute, we know that B does not stash said escaping
allocas in a manner that outlives B itself and thus could be accessed
indirectly by A.
With the changes introduced by this patch:
1. If we see any escaping allocas passed as a capturing argument, we do
nothing and bail early.
2. If we do not see any escaping allocas passed as captured arguments but we
do see escaping allocas passed as nocapture arguments:
i. We do not perform TRE to avoid PR962 since the code generator produces
significantly worse code for the dynamic allocas that would be created
by the TRE algorithm.
ii. If we do not return twice, mark call sites without escaping allocas
with the tail marker. *NOTE* This excludes functions with escaping
nocapture allocas.
3. If we do not see any escaping allocas at all (whether captured or not):
i. If we do not have usage of setjmp, mark all callsites with the tail
marker.
ii. If there are no dynamic/variable sized allocas in the function,
attempt to perform TRE on all callsites in the function.
Based off of a patch by Nick Lewycky.
rdar://14324281.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186057 91177308-0d34-0410-b5e6-96231b3b80d8
debug statements to add a missing newline. Also canonicalize to '\n' instead of
"\n"; the latter calls a function with a loop the former does not.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184897 91177308-0d34-0410-b5e6-96231b3b80d8
When a 1-element vector alloca is promoted, a store instruction can often be
rewritten without converting the value to a scalar and using an insertelement
instruction to stuff it into the new alloca. This patch just adds a check
to skip that conversion when it is unnecessary. This turns out to be really
important for some ARM Neon operations where <1 x i64> is used to get around
the fact that i64 is not a legal type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184870 91177308-0d34-0410-b5e6-96231b3b80d8
This commit completely removes what is left of the simplify-libcalls
pass. All of the functionality has now been migrated to the instcombine
and functionattrs passes. The following C API functions are now NOPs:
1. LLVMAddSimplifyLibCallsPass
2. LLVMPassManagerBuilderSetDisableSimplifyLibCalls
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184459 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to this change, the considered addressing modes may be invalid since the
maximum and minimum offsets were not taking into account.
This was causing an assertion failure.
The added test case exercices that behavior.
<rdar://problem/14199725> Assertion failed: (CurScaleCost >= 0 && "Legal
addressing mode has an illegal cost!")
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@184341 91177308-0d34-0410-b5e6-96231b3b80d8
r183584 tries to derive some info from the code *AFTER* a call and apply
these derived info to the code *BEFORE* the call, which is not always safe
as the call in question may never return, and in this case, the derived
info is invalid.
Thank Duncan for pointing out this potential bug.
rdar://14073661
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183606 91177308-0d34-0410-b5e6-96231b3b80d8
The MemCpyOpt pass is capable of optimizing:
callee(&S); copy N bytes from S to D.
into:
callee(&D);
subject to some legality constraints.
Assertion is triggered when the compiler tries to evalute "sizeof(typeof(D))",
while D is an opaque-typed, 'sret' formal argument of function being compiled.
i.e. the signature of the func being compiled is something like this:
T caller(...,%opaque* noalias nocapture sret %D, ...)
The fix is that when come across such situation, instead of calling some
utility functions to get the size of D's type (which will crash), we simply
assume D has at least N bytes as implified by the copy-instruction.
rdar://14073661
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183584 91177308-0d34-0410-b5e6-96231b3b80d8
IndVarSimplify is willing to move divide instructions outside of their
loop bodies if they are invariant of the loop. However, it may not be
safe to expand them if we do not know if they can trap.
Instead, check to see if it is not safe to expand the instruction and
skip the expansion.
This fixes PR16041.
Testcase by Rafael Ávila de Espíndola.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183239 91177308-0d34-0410-b5e6-96231b3b80d8
Account for the cost of scaling factor in Loop Strength Reduce when rating the
formulae. This uses a target hook.
The default implementation of the hook is: if the addressing mode is legal, the
scaling factor is free.
<rdar://problem/13806271>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183045 91177308-0d34-0410-b5e6-96231b3b80d8
Namely, check if the target allows to fold more that one register in the
addressing mode and if yes, adjust the cost accordingly.
Prior to this commit, reg1 + scale * reg2 accesses were artificially preferred
to reg1 + reg2 accesses. Indeed, the cost model wrongly assumed that reg1 + reg2
needs a temporary register for the computation, whereas it was correctly
estimated for reg1 + scale * reg2.
<rdar://problem/13973908>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@183021 91177308-0d34-0410-b5e6-96231b3b80d8
iteration.
This on step toward non-iterative GVN. My local hack suggests that getting rid
of iteration will speedup GVN by 30%+ on a medium sized input (2k LOC, C++).
I cannot explain why not 2x or more at this moment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181532 91177308-0d34-0410-b5e6-96231b3b80d8
Test case by Michele Scandale!
Fixes PR10293: Load not hoisted out of loop with multiple exits.
There are few regressions with this patch, now tracked by
rdar:13817079, and a roughly equal number of improvements. The
regressions are almost certainly back luck because LoopRotate has very
little idea of whether rotation is profitable. Doing better requires a
more comprehensive solution.
This checkin is a quick fix that lacks generality (PR10293 has
a counter-example). But it trivially fixes the case in PR10293 without
interfering with other cases, and it does satify the criteria that
LoopRotate is a loop canonicalization pass that should avoid
heuristics and special cases.
I can think of two approaches that would probably be better in
the long run. Ultimately they may both make sense.
(1) LoopRotate should check that the current header would make a good
loop guard, and that the loop does not already has a sufficient
guard. The artifical SimplifiedLoopLatch check would be unnecessary,
and the design would be more general and canonical. Two difficulties:
- We need a strong guarantee that we won't endlessly rotate, so the
analysis would need to be precise in order to avoid the
SimplifiedLoopLatch precondition.
- Analysis like this are usually based on SCEV, which we don't want to
rely on.
(2) Rotate on-demand in late loop passes. This could even be done by
shoving the loop back on the queue after the optimization that needs
it. This could work well when we find LICM opportunities in
multi-branch loops. This requires some work, and it doesn't really
solve the problem of SCEV wanting a loop guard before the analysis.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181230 91177308-0d34-0410-b5e6-96231b3b80d8
This function consists of following steps:
1. Collect dependent memory accesses.
2. Analyze availability.
3. Perform fully redundancy elimination, or
4. Perform PRE, depending on the availability
Step 2, 3 and 4 are now moved to three helper routines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@181047 91177308-0d34-0410-b5e6-96231b3b80d8
Actually it took me couple of hours trying to make sense of them and
only to find they are dead code. I guess the original author used
"allSingleSucc" to indicate if there are any critial edge emanating
from some blocks, and tried to perform code motion (actually speculation)
in the presence of these critical edges; but later on he/she changed mind
and decided to perform edge-splitting first.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180951 91177308-0d34-0410-b5e6-96231b3b80d8
the things, and renames it to CBindingWrapping.h. I also moved
CBindingWrapping.h into Support/.
This new file just contains the macros for defining different wrap/unwrap
methods.
The calls to those macros, as well as any custom wrap/unwrap definitions
(like for array of Values for example), are put into corresponding C++
headers.
Doing this required some #include surgery, since some .cpp files relied
on the fact that including Wrap.h implicitly caused the inclusion of a
bunch of other things.
This also now means that the C++ headers will include their corresponding
C API headers; for example Value.h must include llvm-c/Core.h. I think
this is harmless, since the C API headers contain just external function
declarations and some C types, so I don't believe there should be any
nasty dependency issues here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180881 91177308-0d34-0410-b5e6-96231b3b80d8
Shuffles are more difficult to lower and we usually don't touch them, while we do optimize selects more often.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180875 91177308-0d34-0410-b5e6-96231b3b80d8
When Reassociator optimize "(x | C1)" ^ "(X & C2)", it may swap the two
subexpressions, however, it forgot to swap cached constants (of C1 and C2)
accordingly.
rdar://13739160
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180676 91177308-0d34-0410-b5e6-96231b3b80d8
Also add a check for llvm.used in the verifier and simplify clients now that
they can assume they have a ConstantArray.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@180019 91177308-0d34-0410-b5e6-96231b3b80d8
This is an edge case that can happen if we modify a chain of multiple selects.
Update all operands in that case and remove the assert. PR15805.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179982 91177308-0d34-0410-b5e6-96231b3b80d8
I brazenly think this change is slightly simpler than r178793 because:
- no "state" in functor
- "OpndPtrs[i]" looks simpler than "&Opnds[OpndIndices[i]]"
While I can reproduce the probelm in Valgrind, it is rather difficult to come up
a standalone testing case. The reason is that when an iterator is invalidated,
the stale invalidated elements are not yet clobbered by nonsense data, so the
optimizer can still proceed successfully.
Thank Benjamin for fixing this bug and generously providing the test case.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@179062 91177308-0d34-0410-b5e6-96231b3b80d8
The fix for PR14972 in r177055 introduced a real think-o in the *store*
side, likely because I was much more focused on the load side. While we
can arbitrarily widen (or narrow) a loaded value, we can't arbitrarily
widen a value to be stored, as that changes the width of memory access!
Lock down the code path in the store rewriting which would do this to
only handle the intended circumstance.
All of the existing tests continue to pass, and I've added a test from
the PR.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178974 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization is unstable at this moment; it
1) block us on a very important application
2) PR15200
3) test6 and test7 in test/Transforms/ScalarRepl/dynamic-vector-gep.ll
(the CHECK command compare the output against wrong result)
I personally believe this optimization should not have any impact on the
autovectorized code, as auto-vectorizer is supposed to put gather/scatter
in a "right" way. Although in theory downstream optimizaters might reveal
some gather/scatter optimization opportunities, the chance is quite slim.
For the hand-crafted vectorizing code, in term of redundancy elimination,
load-CSE, copy-propagation and DSE can collectively achieve the same result,
but in much simpler way. On the other hand, these optimizers are able to
improve the code in a incremental way; in contrast, SROA is sort of all-or-none
approach. However, SROA might slighly win in stack size, as it tries to figure
out a stretch of memory tightenly cover the area accessed by the dynamic index.
rdar://13174884
PR15200
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178912 91177308-0d34-0410-b5e6-96231b3b80d8
OpndPtrs stored pointers into the Opnd vector that became invalid when the
vector grows. Store indices instead. Sadly I only have a large testcase that
only triggers under valgrind, so I didn't include it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@178793 91177308-0d34-0410-b5e6-96231b3b80d8
The key part of this is ensuring that name prefixes remain in a Twine
form until we get to a point where we can nuke them under NDEBUG. This
is tricky using the old APIs as they played fast and loose with Twine,
which is prone to serious error. The inserter is much cleaner as it is
actually in the call stack leading to the setName call, and so has
a good opportunity to prepend the prefix.
This matters more than you might imagine because most runs over an
alloca find a single partition, and rewrite 3 or 4 instructions
referring to it. As a consequence doing this lazily and exclusively with
Twine allows the optimizer to delete more of it and shaves another 2% to
3% off of the release build's SROA run time for PR15412. I also think
the APIs are cleaner, and the use of Twine is more reliable, so
I consider it a win-win despite the churn required to reach this state.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177631 91177308-0d34-0410-b5e6-96231b3b80d8
The 'Modified' variable should have been removed from SimplifyLibCalls
in r177619, but was missed. This commit removes it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177622 91177308-0d34-0410-b5e6-96231b3b80d8
The simplify-libcalls pass implemented a doInitialization hook to infer
function prototype attributes for well-known functions. Given that the
simplify-libcalls pass is going away *and* that the functionattrs pass
is already in place to deduce function attributes, I am moving this logic
to the functionattrs pass. This approach was discussed during patch
review:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/157465.html.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177619 91177308-0d34-0410-b5e6-96231b3b80d8
This is espcially important because the new SROA pass goes to great
lengths to provide helpful names for debugging, and as a consequence
they can become very slow to render.
Good for between 5% and 15% of the SROA runtime on some slow test cases
such as the one in PR15412.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177495 91177308-0d34-0410-b5e6-96231b3b80d8
- it is trivially known to be used inside the loop in a way that can not be optimized away
- there is no use outside of the loop which can take advantage of the computation hoisting
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177432 91177308-0d34-0410-b5e6-96231b3b80d8
The fundamental problem is that SROA didn't allow for overly wide loads
where the bits past the end of the alloca were masked away and the load
was sufficiently aligned to ensure there is no risk of page fault, or
other trapping behavior. With such widened loads, SROA would delete the
load entirely rather than clamping it to the size of the alloca in order
to allow mem2reg to fire. This was exposed by a test case that neatly
arranged for GVN to run first, widening certain loads, followed by an
inline step, and then SROA which miscompiles the code. However, I see no
reason why this hasn't been plaguing us in other contexts. It seems
deeply broken.
Diagnosing all of the above took all of 10 minutes of debugging. The
really annoying aspect is that fixing this completely breaks the pass.
;] There was an implicit reliance on the fact that no loads or stores
extended past the alloca once we decided to rewrite them in the final
stage of SROA. This was used to encode information about whether the
loads and stores had been split across multiple partitions of the
original alloca. That required threading explicit tracking of whether
a *use* of a partition is split across multiple partitions.
Once that was done, another problem arose: we allowed splitting of
integer loads and stores iff they were loads and stores to the entire
alloca. This is a really arbitrary limitation, and splitting at least
some integer loads and stores is crucial to maximize promotion
opportunities. My first attempt was to start removing the restriction
entirely, but currently that does Very Bad Things by causing *many*
common alloca patterns to be fully decomposed into i8 operations and
lots of or-ing together to produce larger integers on demand. The code
bloat is terrifying. That is still the right end-goal, but substantial
work must be done to either merge partitions or ensure that small i8
values are eagerly merged in some other pass. Sadly, figuring all this
out took essentially all the time and effort here.
So the end result is that we allow splitting only when the load or store
at least covers the alloca. That ensures widened loads and stores don't
hurt SROA, and that we don't rampantly decompose operations more than we
have previously.
All of this was already fairly well tested, and so I've just updated the
tests to cover the wide load behavior. I can add a test that crafts the
pass ordering magic which caused the original PR, but that seems really
brittle and to provide little benefit. The fundamental problem is that
widened loads should Just Work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@177055 91177308-0d34-0410-b5e6-96231b3b80d8
* Only apply divide bypass optimization when not optimizing for size.
* Fixed bug caused by constant for 0 value of type Int32,
used dividend type to generate the constant instead.
* For atom x86-64 apply the divide bypass to use 16-bit divides instead of
64-bit divides when operand values are small enough.
* Added lit tests for 64-bit divide bypass.
Patch by Tyler Nowicki!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@176442 91177308-0d34-0410-b5e6-96231b3b80d8
This is a common pattern with dyn_cast and similar constructs, when the
PHI no longer depends on the select it can often be turned into a simpler
construct or even get hoisted out of the loop.
PR15340.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175995 91177308-0d34-0410-b5e6-96231b3b80d8
The 'nobuiltin' attribute is applied to call sites to indicate that LLVM should
not treat the callee function as a built-in function. I.e., it shouldn't try to
replace that function with different code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@175835 91177308-0d34-0410-b5e6-96231b3b80d8
Handle chains in which the same offset is used for both loads and
stores to the same array.
Fixes rdar://11410078.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174789 91177308-0d34-0410-b5e6-96231b3b80d8
the SCEV vector size in LoopStrengthReduce. It is observed that
the BaseRegs vector size is 4 in most cases,
and elements are frequently copied when it is initialized as
SmallVector<const SCEV *, 2> BaseRegs.
Our benchmark results show that the compilation time performance
improved by ~0.5%.
Patch by Wan Xiaofei.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174219 91177308-0d34-0410-b5e6-96231b3b80d8
reference to a pointer, so that it can handle the case where DataLayout
is not available and behave conservatively.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@174024 91177308-0d34-0410-b5e6-96231b3b80d8
This name change does the following:
1. Causes the function name to use proper ARC terminology.
2. Makes it clear what the function truly does.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173609 91177308-0d34-0410-b5e6-96231b3b80d8
The method PerformCodePlacement was doing too much (i.e. 3x loops, lots of
different checking). This refactoring separates the analysis section of the
method into a separate function while leaving the actual code placement and
analysis preparation in PerformCodePlacement.
*NOTE* Really this part of ObjCARC should be refactored out of the main pass
class into its own seperate class/struct. But, it is not time to make that
change yet though (don't want to make such an invasive change without fixing all
of the bugs first).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173201 91177308-0d34-0410-b5e6-96231b3b80d8
Use the AttributeSet when we're talking about more than one attribute. Add a
function that adds a single attribute. No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173196 91177308-0d34-0410-b5e6-96231b3b80d8
generic function calls and intrinsics. This is somewhat overlapping with
an existing intrinsic cost method, but that one seems targetted at
vector intrinsics. I'll merge them or separate their names and use cases
in a separate commit.
This sinks the test of 'callIsSmall' down into TTI where targets can
control it. The whole thing feels very hack-ish to me though. I've left
a FIXME comment about the fundamental design problem this presents. It
isn't yet clear to me what the users of this function *really* care
about. I'll have to do more analysis to figure that out. Putting this
here at least provides it access to proper analysis pass tools and other
such. It also allows us to more cleanly implement the baseline cost
interfaces in TTI.
With this commit, it is now theoretically possible to simplify much of
the inline cost analysis's handling of calls by calling through to this
interface. That conversion will have to happen in subsequent commits as
it requires more extensive restructuring of the inline cost analysis.
The CodeMetrics class is now really only in the business of running over
a block of code and aggregating the metrics on that block of code, with
the actual cost evaluation done entirely in terms of TTI.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173148 91177308-0d34-0410-b5e6-96231b3b80d8
is free. The whole CodeMetrics API should probably be reworked more, but
this is enough to allow deleting the duplicate code there for computing
whether an instruction is free.
All of the passes using this have been updated to pull in TTI and hand
it to the CodeMetrics stuff. Further, a dead CodeMetrics API
(analyzeFunction) is nuked for lack of users.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@173036 91177308-0d34-0410-b5e6-96231b3b80d8
Further encapsulation of the Attribute object. Don't allow direct access to the
Attribute object as an aggregate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172853 91177308-0d34-0410-b5e6-96231b3b80d8
Specifically according to the semantics of ARC -fno-objc-arc-exception simply
states that it is expected that the unwind path out of a call *MAY* not release
objects. Thus we can have the situation where a release gets moved into a catch
block which we ignore when we remove a retain/release pair resulting in (even
though we assume the program is exiting anyways) the cleanup code path
potentially blowing up before program exit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172599 91177308-0d34-0410-b5e6-96231b3b80d8
case, but looking at the diff this was an obviously unintended change.
Thanks for the careful review Bill! =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172336 91177308-0d34-0410-b5e6-96231b3b80d8
The reason that this occurs is that tail calling objc_autorelease eventually
tail calls -[NSObject autorelease] which supports fast autorelease. This can
cause us to violate the semantic gaurantees of __autoreleasing variables that
assignment to an __autoreleasing variables always yields an object that is
placed into the innermost autorelease pool.
The fix included in this patch works by:
1. In the peephole optimization function OptimizeIndividualFunctions, always
remove tail call from objc_autorelease.
2. Whenever we convert to/from an objc_autorelease, set/unset the tail call
keyword as appropriate.
*NOTE* I also handled the case where objc_autorelease is converted in
OptimizeReturns to an autoreleaseRV which still violates the ARC semantics. I
will be removing that in a later patch and I wanted to make sure that the tree
is in a consistent state vis-a-vis ARC always.
Additionally some test cases are provided and all tests that have tail call marked
objc_autorelease keywords have been modified so that tail call has been removed.
*NOTE* One test fails due to a separate bug that I am going to commit soon. Thus
I marked the check line TMP: instead of CHECK: so make check does not fail.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172287 91177308-0d34-0410-b5e6-96231b3b80d8
The root cause is mistakenly taking for granted that
"dyn_cast<Instruction>(a-Value)"
return a non-NULL instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172145 91177308-0d34-0410-b5e6-96231b3b80d8
1. Added debug messages when in OptimizeIndividualCalls we move calls into predecessors and then erase the original call.
2. Added debug messages when in the process of moving calls in ObjCARCOpt::MoveCalls we create new RR and delete old RR.
3. Added a debug message when we visit a specific retain instruction in ObjCARCOpt::PerformCodePlacement.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171988 91177308-0d34-0410-b5e6-96231b3b80d8
peculiar headers under include/llvm.
This struct still doesn't make a lot of sense, but it makes more sense
down in TargetLowering than it did before.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171739 91177308-0d34-0410-b5e6-96231b3b80d8
already in a class, just inline the four of them. I suspect that this
class could be simplified some to not always keep distinct variables for
these things, but it wasn't clear to me how given the usage so I opted
for a trivial and mechanical translation.
This removes one of the two remaining users of a header in include/llvm
which does nothing more than define a 4 member struct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171738 91177308-0d34-0410-b5e6-96231b3b80d8
TargetTransformInfo rather than TargetLowering, removing one of the
primary instances of the layering violation of Transforms depending
directly on Target.
This is a really big deal because LSR used to be a "special" pass that
could only be tested fully using llc and by looking at the full output
of it. It also couldn't run with any other loop passes because it had to
be created by the backend. No longer is this true. LSR is now just
a normal pass and we should probably lift the creation of LSR out of
lib/CodeGen/Passes.cpp and into the PassManagerBuilder. =] I've not done
this, or updated all of the tests to use opt and a triple, because
I suspect someone more familiar with LSR would do a better job. This
change should be essentially without functional impact for normal
compilations, and only change behvaior of targetless compilations.
The conversion required changing all of the LSR code to refer to the TTI
interfaces, which fortunately are very similar to TargetLowering's
interfaces. However, it also allowed us to *always* expect to have some
implementation around. I've pushed that simplification through the pass,
and leveraged it to simplify code somewhat. It required some test
updates for one of two things: either we used to skip some checks
altogether but now we get the default "no" answer for them, or we used
to have no information about the target and now we do have some.
I've also started the process of removing AddrMode, as the TTI interface
doesn't use it any longer. In some cases this simplifies code, and in
others it adds some complexity, but I think it's not a bad tradeoff even
there. Subsequent patches will try to clean this up even further and use
other (more appropriate) abstractions.
Yet again, almost all of the formatting changes brought to you by
clang-format. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171735 91177308-0d34-0410-b5e6-96231b3b80d8
I'm sorry for duplicating bad style here, but I wanted to keep
consistency. I've pinged the code review thread where this style was
reviewed and changes were requested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171714 91177308-0d34-0410-b5e6-96231b3b80d8
through as a reference rather than a pointer. There is always *some*
implementation of this available, so this simplifies code by not having
to test for whether it is available or not.
Further, it turns out there were piles of places where SimplifyCFG was
recursing and not passing down either TD or TTI. These are fixed to be
more pedantically consistent even though I don't have any particular
cases where it would matter.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171691 91177308-0d34-0410-b5e6-96231b3b80d8
The reason that there are two cases is that the first case handles the unary cases and the second the binary cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171672 91177308-0d34-0410-b5e6-96231b3b80d8
next to its only user. This helper relies on TargetLowering information
that shouldn't be generally used throughout the Transfoms library, and
so it made little sense as a generic utility.
This also consolidates the file where we need to remove the remaining
uses of TargetLowering in favor of the IR-layer abstract interface in
TargetTransformInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171590 91177308-0d34-0410-b5e6-96231b3b80d8
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
utils/sort_includes.py script.
Most of these are updating the new R600 target and fixing up a few
regressions that have creeped in since the last time I sorted the
includes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171362 91177308-0d34-0410-b5e6-96231b3b80d8
