a TargetMachine to construct (and thus isn't always available), to an
analysis group that supports layered implementations much like
AliasAnalysis does. This is a pretty massive change, with a few parts
that I was unable to easily separate (sorry), so I'll walk through it.
The first step of this conversion was to make TargetTransformInfo an
analysis group, and to sink the nonce implementations in
ScalarTargetTransformInfo and VectorTargetTranformInfo into
a NoTargetTransformInfo pass. This allows other passes to add a hard
requirement on TTI, and assume they will always get at least on
implementation.
The TargetTransformInfo analysis group leverages the delegation chaining
trick that AliasAnalysis uses, where the base class for the analysis
group delegates to the previous analysis *pass*, allowing all but tho
NoFoo analysis passes to only implement the parts of the interfaces they
support. It also introduces a new trick where each pass in the group
retains a pointer to the top-most pass that has been initialized. This
allows passes to implement one API in terms of another API and benefit
when some other pass above them in the stack has more precise results
for the second API.
The second step of this conversion is to create a pass that implements
the TargetTransformInfo analysis using the target-independent
abstractions in the code generator. This replaces the
ScalarTargetTransformImpl and VectorTargetTransformImpl classes in
lib/Target with a single pass in lib/CodeGen called
BasicTargetTransformInfo. This class actually provides most of the TTI
functionality, basing it upon the TargetLowering abstraction and other
information in the target independent code generator.
The third step of the conversion adds support to all TargetMachines to
register custom analysis passes. This allows building those passes with
access to TargetLowering or other target-specific classes, and it also
allows each target to customize the set of analysis passes desired in
the pass manager. The baseline LLVMTargetMachine implements this
interface to add the BasicTTI pass to the pass manager, and all of the
tools that want to support target-aware TTI passes call this routine on
whatever target machine they end up with to add the appropriate passes.
The fourth step of the conversion created target-specific TTI analysis
passes for the X86 and ARM backends. These passes contain the custom
logic that was previously in their extensions of the
ScalarTargetTransformInfo and VectorTargetTransformInfo interfaces.
I separated them into their own file, as now all of the interface bits
are private and they just expose a function to create the pass itself.
Then I extended these target machines to set up a custom set of analysis
passes, first adding BasicTTI as a fallback, and then adding their
customized TTI implementations.
The fourth step required logic that was shared between the target
independent layer and the specific targets to move to a different
interface, as they no longer derive from each other. As a consequence,
a helper functions were added to TargetLowering representing the common
logic needed both in the target implementation and the codegen
implementation of the TTI pass. While technically this is the only
change that could have been committed separately, it would have been
a nightmare to extract.
The final step of the conversion was just to delete all the old
boilerplate. This got rid of the ScalarTargetTransformInfo and
VectorTargetTransformInfo classes, all of the support in all of the
targets for producing instances of them, and all of the support in the
tools for manually constructing a pass based around them.
Now that TTI is a relatively normal analysis group, two things become
straightforward. First, we can sink it into lib/Analysis which is a more
natural layer for it to live. Second, clients of this interface can
depend on it *always* being available which will simplify their code and
behavior. These (and other) simplifications will follow in subsequent
commits, this one is clearly big enough.
Finally, I'm very aware that much of the comments and documentation
needs to be updated. As soon as I had this working, and plausibly well
commented, I wanted to get it committed and in front of the build bots.
I'll be doing a few passes over documentation later if it sticks.
Commits to update DragonEgg and Clang will be made presently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171681 91177308-0d34-0410-b5e6-96231b3b80d8
into their new header subdirectory: include/llvm/IR. This matches the
directory structure of lib, and begins to correct a long standing point
of file layout clutter in LLVM.
There are still more header files to move here, but I wanted to handle
them in separate commits to make tracking what files make sense at each
layer easier.
The only really questionable files here are the target intrinsic
tablegen files. But that's a battle I'd rather not fight today.
I've updated both CMake and Makefile build systems (I think, and my
tests think, but I may have missed something).
I've also re-sorted the includes throughout the project. I'll be
committing updates to Clang, DragonEgg, and Polly momentarily.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@171366 91177308-0d34-0410-b5e6-96231b3b80d8
missed in the first pass because the script didn't yet handle include
guards.
Note that the script is now able to handle all of these headers without
manual edits. =]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@169224 91177308-0d34-0410-b5e6-96231b3b80d8
The TargetTransform changes are breaking LTO bootstraps of clang. I am
working with Nadav to figure out the problem, but I am reverting it for now
to get our buildbots working.
This reverts svn commits: 165665 165669 165670 165786 165787 165997
and I have also reverted clang svn 165741
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@166168 91177308-0d34-0410-b5e6-96231b3b80d8
Passes prior to instructon selection are now split into separate configurable stages.
Header dependencies are simplified.
The bulk of this diff is simply removal of the silly DisableVerify flags.
Sorry for the target header churn. Attempting to stabilize them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149754 91177308-0d34-0410-b5e6-96231b3b80d8
Allows command line overrides to be centralized in LLVMTargetMachine.cpp.
LLVMTargetMachine can intercept common passes and give precedence to command line overrides.
Allows adding "internal" target configuration options without touching TargetOptions.
Encapsulates the PassManager.
Provides a good point to initialize all CodeGen passes so that Pass ID's can be used in APIs.
Allows modifying the target configuration hooks without rebuilding the world.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149672 91177308-0d34-0410-b5e6-96231b3b80d8
change, now you need a TargetOptions object to create a TargetMachine. Clang
patch to follow.
One small functionality change in PTX. PTX had commented out the machine
verifier parts in their copy of printAndVerify. That now calls the version in
LLVMTargetMachine. Users of PTX who need verification disabled should rely on
not passing the command-line flag to enable it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145714 91177308-0d34-0410-b5e6-96231b3b80d8
and code model. This eliminates the need to pass OptLevel flag all over the
place and makes it possible for any codegen pass to use this information.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@144788 91177308-0d34-0410-b5e6-96231b3b80d8
- Introduce JITDefault code model. This tells targets to set different default
code model for JIT. This eliminates the ugly hack in TargetMachine where
code model is changed after construction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135580 91177308-0d34-0410-b5e6-96231b3b80d8
(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135468 91177308-0d34-0410-b5e6-96231b3b80d8
be the first encoded as the first feature. It then uses the CPU name to look up
features / scheduling itineray even though clients know full well the CPU name
being used to query these properties.
The fix is to just have the clients explictly pass the CPU name!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@134127 91177308-0d34-0410-b5e6-96231b3b80d8
Move EmitTargetCodeForMemcpy, EmitTargetCodeForMemset, and
EmitTargetCodeForMemmove out of TargetLowering and into
SelectionDAGInfo to exercise this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103481 91177308-0d34-0410-b5e6-96231b3b80d8
const_casts, and it reinforces the design of the Target classes being
immutable.
SelectionDAGISel::IsLegalToFold is now a static member function, because
PIC16 uses it in an unconventional way. There is more room for API
cleanup here.
And PIC16's AsmPrinter no longer uses TargetLowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@101635 91177308-0d34-0410-b5e6-96231b3b80d8
pair instead of from a virtual method on TargetMachine. This cuts the final
ties of TargetAsmInfo to TargetMachine, meaning that MC can now use
TargetAsmInfo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@78802 91177308-0d34-0410-b5e6-96231b3b80d8
--- Reverse-merging r75799 into '.':
U test/Analysis/PointerTracking
U include/llvm/Target/TargetMachineRegistry.h
U include/llvm/Target/TargetMachine.h
U include/llvm/Target/TargetRegistry.h
U include/llvm/Target/TargetSelect.h
U tools/lto/LTOCodeGenerator.cpp
U tools/lto/LTOModule.cpp
U tools/llc/llc.cpp
U lib/Target/PowerPC/PPCTargetMachine.h
U lib/Target/PowerPC/AsmPrinter/PPCAsmPrinter.cpp
U lib/Target/PowerPC/PPCTargetMachine.cpp
U lib/Target/PowerPC/PPC.h
U lib/Target/ARM/ARMTargetMachine.cpp
U lib/Target/ARM/AsmPrinter/ARMAsmPrinter.cpp
U lib/Target/ARM/ARMTargetMachine.h
U lib/Target/ARM/ARM.h
U lib/Target/XCore/XCoreTargetMachine.cpp
U lib/Target/XCore/XCoreTargetMachine.h
U lib/Target/PIC16/PIC16TargetMachine.cpp
U lib/Target/PIC16/PIC16TargetMachine.h
U lib/Target/Alpha/AsmPrinter/AlphaAsmPrinter.cpp
U lib/Target/Alpha/AlphaTargetMachine.cpp
U lib/Target/Alpha/AlphaTargetMachine.h
U lib/Target/X86/X86TargetMachine.h
U lib/Target/X86/X86.h
U lib/Target/X86/AsmPrinter/X86ATTAsmPrinter.h
U lib/Target/X86/AsmPrinter/X86AsmPrinter.cpp
U lib/Target/X86/AsmPrinter/X86IntelAsmPrinter.h
U lib/Target/X86/X86TargetMachine.cpp
U lib/Target/MSP430/MSP430TargetMachine.cpp
U lib/Target/MSP430/MSP430TargetMachine.h
U lib/Target/CppBackend/CPPTargetMachine.h
U lib/Target/CppBackend/CPPBackend.cpp
U lib/Target/CBackend/CTargetMachine.h
U lib/Target/CBackend/CBackend.cpp
U lib/Target/TargetMachine.cpp
U lib/Target/IA64/IA64TargetMachine.cpp
U lib/Target/IA64/AsmPrinter/IA64AsmPrinter.cpp
U lib/Target/IA64/IA64TargetMachine.h
U lib/Target/IA64/IA64.h
U lib/Target/MSIL/MSILWriter.cpp
U lib/Target/CellSPU/SPUTargetMachine.h
U lib/Target/CellSPU/SPU.h
U lib/Target/CellSPU/AsmPrinter/SPUAsmPrinter.cpp
U lib/Target/CellSPU/SPUTargetMachine.cpp
U lib/Target/Mips/AsmPrinter/MipsAsmPrinter.cpp
U lib/Target/Mips/MipsTargetMachine.cpp
U lib/Target/Mips/MipsTargetMachine.h
U lib/Target/Mips/Mips.h
U lib/Target/Sparc/AsmPrinter/SparcAsmPrinter.cpp
U lib/Target/Sparc/SparcTargetMachine.cpp
U lib/Target/Sparc/SparcTargetMachine.h
U lib/ExecutionEngine/JIT/TargetSelect.cpp
U lib/Support/TargetRegistry.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75820 91177308-0d34-0410-b5e6-96231b3b80d8
from.
- This commit is almost entirely propogating the reference through the
TargetMachine subclasses' constructor calls.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@75778 91177308-0d34-0410-b5e6-96231b3b80d8
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70343 91177308-0d34-0410-b5e6-96231b3b80d8
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@70270 91177308-0d34-0410-b5e6-96231b3b80d8
