operations on the call graph. This one forms a cycle, and while not as
complex as removing an internal edge from an SCC, it involves
a reasonable amount of work to find all of the nodes newly connected in
a cycle.
Also somewhat alarming is the worst case complexity here: it might have
to walk roughly the entire SCC inverse DAG to insert a single edge. This
is carefully documented in the API (I hope).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207935 91177308-0d34-0410-b5e6-96231b3b80d8
Both MinGW and cygwin (i686) construct export directives without the global
leader prefix. This is mostly due to the fact that they use GNU ld which does
not correctly handle the export directive. This apparently has been been broken
for a while. However, this was recently reported as being broken by
mingwandroid and diorcety of the msys2 project.
Remove the global leader prefix if targeting MinGW or cygwin, otherwise, retain
the global leader prefix. Add an explicit test for cygwin's behaviour of export
directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207926 91177308-0d34-0410-b5e6-96231b3b80d8
Create a helper function to generate the export directive. This was previously
duplicated inline to handle export directives for variables and functions. This
also enables the use of range-based iterators for the generation of the
directive rather than the traditional loops. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207925 91177308-0d34-0410-b5e6-96231b3b80d8
This fix simply ensures that both metadata nodes are path-aware before
performing path-aware alias analysis.
This issue isn't normally triggered in LLVM, because we perform an autoupgrade
of the TBAA metadata to the new format when reading in LL or BC files. This
issue only appears when a client creates the IR manually and mixes old and new
TBAA metadata format.
This fixes <rdar://problem/16760860>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207923 91177308-0d34-0410-b5e6-96231b3b80d8
The fix itself is fairly simple: move getAccessVariant to MCValue so that we
replace the old weak expression evaluation with the far more general
EvaluateAsRelocatable.
This then requires that EvaluateAsRelocatable stop when it finds a non
trivial reference kind. And that in turn requires the ELF writer to look
harder for weak references.
Last but not least, this found a case where we were being bug by bug
compatible with gas and accepting an invalid input. I reported pr19647
to track it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207920 91177308-0d34-0410-b5e6-96231b3b80d8
There is no point in creating it if we're not going to vectorize
anything. Creating the map is expensive as it creates large values.
No functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207916 91177308-0d34-0410-b5e6-96231b3b80d8
which are corresponding to the current target read from the ELF file.
This fix cannot be tested until obj2yaml does not support ELF format.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207905 91177308-0d34-0410-b5e6-96231b3b80d8
Committed initially in r207724-r207726 and reverted due to compiler-rt
crashes in r207732.
Instead, fix this harder with unordered_map and store the LexicalScopes
by value in the map. This did necessitate moving the definition of
LexicalScope above the definition of LexicalScopes.
Let's see how the buildbots/compilers tolerate unordered_map::emplace +
std::piecewise_construct + std::forward_as_tuple...
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207876 91177308-0d34-0410-b5e6-96231b3b80d8
There are public functions that mutate various members as well as
another private member already, so make all the members private to
avoid the discontinuity and add accessors for the values. Should
be no functional change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207868 91177308-0d34-0410-b5e6-96231b3b80d8
Reading line tables in llvm-cov was pretty broken, but would happen to
work as long as no line in the table was 0. It's not clear to me
whether a line of zero *should* show up in these tables, but deciding
to read a string in the middle of the line table is certainly the
wrong thing to do if it does.
I've also added some comments, as trying to figure out what this block
of code was doing was fairly unpleasant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207866 91177308-0d34-0410-b5e6-96231b3b80d8
This moves most of GlobalOpt's constructor optimization
code out of GlobalOpt into Transforms/Utils/CDtorUtils.{h,cpp}. The
public interface is a single function OptimizeGlobalCtorsList() that
takes a predicate returning which constructors to remove.
GlobalOpt calls this with a function that statically evaluates all
constructors, just like it did before. This part of the change is
behavior-preserving.
Also add a call to this from GlobalDCE with a filter that removes global
constructors that contain a "ret" instruction and nothing else – this
fixes PR19590.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207856 91177308-0d34-0410-b5e6-96231b3b80d8
address to AnalyzeLoadFromClobberingLoad. This fixes a bug in load-PRE where
PRE is applied to a load that is not partially redundant.
<rdar://problem/16638765>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207853 91177308-0d34-0410-b5e6-96231b3b80d8
.file records are supposed to have a section identifier of 65534
(IMAGE_SCN_DEBUG) rather than 0. This is spelt out clearly within the PE/COFF
specification. Fix this minor oversight with the implementation for support for
.file records.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207851 91177308-0d34-0410-b5e6-96231b3b80d8
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207846 91177308-0d34-0410-b5e6-96231b3b80d8
v2: move code to AMDGPUISelLowering.cpp
squash with tests (both EG and SI)
Signed-off-by: Jan Vesely <jan.vesely@rutgers.edu>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207845 91177308-0d34-0410-b5e6-96231b3b80d8
The register spiller assumes that only one new instruction is created
when spilling and restoring registers, so we need to emit pseudo
instructions for vector register spills and lower them after
register allocation.
v2:
- Fix calculation of lane index
- Extend VGPR liveness to end of program.
v3:
- Use SIMM16 field of S_NOP to specify multiple NOPs.
https://bugs.freedesktop.org/show_bug.cgi?id=75005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207843 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, LLVM had no knowledge that these instructions actually
modified their address register: fine if they never end up in CodeGen,
but when I'd rather like to write some patterns for them it becomes a
disaster.
The change is mostly straightforward, I think the most significant
design decision was to *always* put the address write-back first. This
allows loads and stores to be accessed more uniformly, for example
permitting the continued sharing of the InstAlias definitions.
I also discovered that the custom Decode logic is no longer needed, so
I removed it.
No tests, because there should be no functionality change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207839 91177308-0d34-0410-b5e6-96231b3b80d8
While post-indexed LD1/ST1 instructions do exist for vector loads,
this patch makes use of the more flexible addressing-modes in LDR/STR
instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207838 91177308-0d34-0410-b5e6-96231b3b80d8
Given the following C code llvm currently generates suboptimal code for
x86-64:
__m128 bss4( const __m128 *ptr, size_t i, size_t j )
{
float f = ptr[i][j];
return (__m128) { f, f, f, f };
}
=================================================
define <4 x float> @_Z4bss4PKDv4_fmm(<4 x float>* nocapture readonly %ptr, i64 %i, i64 %j) #0 {
%a1 = getelementptr inbounds <4 x float>* %ptr, i64 %i
%a2 = load <4 x float>* %a1, align 16, !tbaa !1
%a3 = trunc i64 %j to i32
%a4 = extractelement <4 x float> %a2, i32 %a3
%a5 = insertelement <4 x float> undef, float %a4, i32 0
%a6 = insertelement <4 x float> %a5, float %a4, i32 1
%a7 = insertelement <4 x float> %a6, float %a4, i32 2
%a8 = insertelement <4 x float> %a7, float %a4, i32 3
ret <4 x float> %a8
}
=================================================
shlq $4, %rsi
addq %rdi, %rsi
movslq %edx, %rax
vbroadcastss (%rsi,%rax,4), %xmm0
retq
=================================================
The movslq is uneeded, but is present because of the trunc to i32 and then
sext back to i64 that the backend adds for vbroadcastss.
We can't remove it because it changes the meaning. The IR that clang
generates is already suboptimal. What clang really should emit is:
%a4 = extractelement <4 x float> %a2, i64 %j
This patch makes that legal. A separate patch will teach clang to do it.
Differential Revision: http://reviews.llvm.org/D3519
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207801 91177308-0d34-0410-b5e6-96231b3b80d8
This creates a lot of core infrastructure in which to add, with little
effort, quite a bit more to mips fast-isel
Test Plan: simplestore.ll
Reviewers: dsanders
Reviewed By: dsanders
Differential Revision: http://reviews.llvm.org/D3527
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207790 91177308-0d34-0410-b5e6-96231b3b80d8
This was initialized by llvm-mc (calling setDwarfVersion) but other
clients (such as clang, llc, etc) aren't necessarily initializing this
so we were getting garbage DWARF version values in the output.
Initialize it to a reasonable default (the same default used in llvm-mc,
though this is higher than it was (2) previously).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207788 91177308-0d34-0410-b5e6-96231b3b80d8
This matches gas' behaviour on COFF.
I think that this yak is now sufficiently shaved for aliases with offset
to work.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207786 91177308-0d34-0410-b5e6-96231b3b80d8
This optimization merges the common part of a group of GEPs, so we can compute
each pointer address by adding a simple offset to the common part.
The optimization is currently only enabled for the NVPTX backend, where it has
a large payoff on some benchmarks.
Review: http://reviews.llvm.org/D3462
Patch by Jingyue Wu.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207783 91177308-0d34-0410-b5e6-96231b3b80d8
This the LLVM portion that will allow Clang and other frontends to emit
typedefs of void by providing a null type for the typedef's underlying
type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207777 91177308-0d34-0410-b5e6-96231b3b80d8
Use i32 instead of specifying SReg_32. When this is
the pseudo INDIRECT_BASE_ADDR, this would give a bogus
verifier error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207770 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes pr19147.
There are a few more related issues to fix, but the testcase in the bug now
passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@207763 91177308-0d34-0410-b5e6-96231b3b80d8
