..
msa
Add support for legalizing SETNE/SETEQ by inverting the condition code and the result of the comparison.
2013-11-21 13:24:49 +00:00
2008-06-05-Carry.ll
2008-07-03-SRet.ll
2008-07-06-fadd64.ll
2008-07-07-Float2Int.ll
2008-07-07-FPExtend.ll
2008-07-07-IntDoubleConvertions.ll
2008-07-15-InternalConstant.ll
2008-07-15-SmallSection.ll
2008-07-16-SignExtInReg.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
2008-07-22-Cstpool.ll
2008-07-23-fpcmp.ll
2008-07-29-icmp.ll
2008-07-31-fcopysign.ll
2008-08-01-AsmInline.ll
2008-08-03-fabs64.ll
2008-08-03-ReturnDouble.ll
2008-08-04-Bitconvert.ll
2008-08-06-Alloca.ll
2008-08-07-CC.ll
2008-08-07-FPRound.ll
2008-08-08-bswap.ll
2008-08-08-ctlz.ll
2008-10-13-LegalizerBug.ll
2008-11-10-xint_to_fp.ll
2009-11-16-CstPoolLoad.ll
2010-07-20-Switch.ll
2010-11-09-CountLeading.ll
2010-11-09-Mul.ll
2011-05-26-BranchKillsVreg.ll
2012-12-12-ExpandMemcpy.ll
2013-11-18-fp64-const0.ll
[mips] Fix 'ran out of registers' in MIPS32 with FP64 when generating code for (ConstantFP 0.0)
2013-11-18 13:12:43 +00:00
addc.ll
addi.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
addressing-mode.ll
align16.ll
alloca16.ll
alloca.ll
analyzebranch.ll
and1.ll
asm-large-immediate.ll
atomic.ll
atomicops.ll
beqzc1.ll
Make all the conditional Mips 16 branches get initially set for the
2013-11-15 02:21:52 +00:00
beqzc.ll
Make all the conditional Mips 16 branches get initially set for the
2013-11-15 02:21:52 +00:00
biggot.ll
blez_bgez.ll
blockaddr.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
br-jmp.ll
brconeq.ll
brconeqk.ll
brconeqz.ll
brconge.ll
brcongt.ll
brconle.ll
brconlt.ll
brconne.ll
brconnek.ll
brconnez.ll
brdelayslot.ll
[mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out
2013-09-28 00:12:32 +00:00
brind.ll
brsize3.ll
Take care of long short branch immediate instructions for mips16 in
2013-11-13 23:52:18 +00:00
brsize3a.ll
Take care of long short branch immediate instructions for mips16 in
2013-11-13 23:52:18 +00:00
bswap.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
buildpairextractelementf64.ll
check-noat.ll
cmov.ll
cmplarge.ll
TBAA: remove !tbaa from testing cases when they are not needed.
2013-09-30 18:17:35 +00:00
const1.ll
Make first substantial checkin of my port of ARM constant islands code to Mips.
2013-10-27 21:57:36 +00:00
const4a.ll
Mostly finish up constant islands port for Mips for load constants.
2013-11-10 00:09:26 +00:00
const6.ll
Mostly finish up constant islands port for Mips for load constants.
2013-11-10 00:09:26 +00:00
const6a.ll
Allow the code which returns the length for inline assembler to know
2013-11-13 04:37:52 +00:00
const-mult.ll
constantfp0.ll
cprestore.ll
ctlz.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
DbgValueOtherTargets.test
disable-tail-merge.ll
[mips] Test case for r192124.
2013-10-07 21:32:57 +00:00
div_rem.ll
div.ll
divrem.ll
[mips] Transfer kill flag to the newly created operand.
2013-10-15 01:06:30 +00:00
divu_remu.ll
divu.ll
double2int.ll
dsp-patterns-cmp-vselect.ll
dsp-patterns.ll
dsp-r1.ll
dsp-r2.ll
dsp-vec-load-store.ll
eh-dwarf-cfa.ll
eh-return32.ll
eh-return64.ll
eh.ll
emit-big-cst.ll
ex2.ll
extins.ll
[mips] Do not generate INS/EXT nodes if target does not have support for
2013-10-09 23:36:17 +00:00
f16abs.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
fabs.ll
fastcc.ll
fcopysign-f32-f64.ll
fcopysign.ll
fixdfsf.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
fmadd1.ll
fneg.ll
fp16instrinsmc.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
fp16mix.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
fp16static.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
fp-indexed-ls.ll
fp-spill-reload.ll
fpbr.ll
fpneeded.ll
fpnotneeded.ll
fptr2.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
frame-address.ll
frem.ll
global-address.ll
global-pointer-reg.ll
gpreg-lazy-binding.ll
gprestore.ll
helloworld.ll
Fix two issues regarding Got pointer (GP) setup.
2013-09-18 22:46:09 +00:00
hf1_body.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
hf16_1.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
hf16call32_body.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
hf16call32.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
hfptrcall.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
i32k.ll
For Mips16, start to consolidate all forms of 32 bit literal loading so that
2013-10-12 02:19:08 +00:00
i64arg.ll
[mips] Make sure there is a chain edge dependency between loads that read
2013-11-09 02:38:51 +00:00
imm.ll
indirectcall.ll
init-array.ll
inlineasm64.ll
inlineasm_constraint.ll
inlineasm-cnstrnt-bad-I-1.ll
inlineasm-cnstrnt-bad-J.ll
inlineasm-cnstrnt-bad-K.ll
inlineasm-cnstrnt-bad-L.ll
inlineasm-cnstrnt-bad-N.ll
inlineasm-cnstrnt-bad-O.ll
inlineasm-cnstrnt-bad-P.ll
inlineasm-cnstrnt-reg64.ll
inlineasm-cnstrnt-reg.ll
inlineasm-operand-code.ll
inlineasmmemop.ll
int-to-float-conversion.ll
internalfunc.ll
jtstat.ll
largefr1.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
largeimm1.ll
largeimmprinting.ll
[mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out
2013-09-28 00:12:32 +00:00
lazy-binding.ll
[mips] Make sure loads from lazy-binding entries do not get CSE'd or hoisted out
2013-09-28 00:12:32 +00:00
lb1.ll
lbu1.ll
lh1.ll
lhu1.ll
lit.local.cfg
llcarry.ll
load-store-left-right.ll
longbranch.ll
[mips] Fix a bug in MipsLongBranch::replaceBranch, which was erasing
2013-10-04 20:51:40 +00:00
machineverifier.ll
madd-msub.ll
mbrsize4a.ll
Add, to constant islands, long jumps similar to ARM far branch.
2013-11-21 05:13:23 +00:00
memcpy.ll
mips16_32_1.ll
mips16_32_3.ll
mips16_32_4.ll
mips16_32_5.ll
mips16_32_6.ll
mips16_32_7.ll
mips16_32_8.ll
mips16_32_9.ll
mips16_32_10.ll
mips16_fpret.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
mips16ex.ll
mips16fpe.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
mips64-f128-call.ll
mips64-f128.ll
mips64-fp-indexed-ls.ll
mips64-libcall.ll
mips64-sret.ll
mips64countleading.ll
mips64directive.ll
mips64ext.ll
mips64extins.ll
mips64fpimm0.ll
mips64fpldst.ll
mips64imm.ll
mips64instrs.ll
[mips] Transfer kill flag to the newly created operand.
2013-10-15 01:06:30 +00:00
mips64intldst.ll
mips64lea.ll
mips64load-store-left-right.ll
mips64muldiv.ll
mips64shift.ll
mipslopat.ll
misha.ll
mno-ldc1-sdc1.ll
mul.ll
mulll.ll
mulull.ll
neg1.ll
nomips16.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
not1.ll
null.ll
o32_cc_byval.ll
o32_cc_vararg.ll
o32_cc.ll
[mips] Fix a bug in function CC_MipsO32_FP64. The second double precision
2013-11-12 22:16:18 +00:00
optimize-fp-math.ll
or1.ll
powif64_16.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
private.ll
ra-allocatable.ll
rdhwr-directives.ll
rem.ll
remat-immed-load.ll
remu.ll
return_address.ll
return-vector.ll
rotate.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
sb1.ll
sel1c.ll
Make all the conditional Mips 16 branches get initially set for the
2013-11-15 02:21:52 +00:00
sel2c.ll
Make all the conditional Mips 16 branches get initially set for the
2013-11-15 02:21:52 +00:00
select.ll
selectcc.ll
seleq.ll
seleqk.ll
selgek.ll
selgt.ll
selle.ll
selltk.ll
selne.ll
selnek.ll
selpat.ll
selTBteqzCmpi.ll
selTBtnezCmpi.ll
selTBtnezSlti.ll
setcc-se.ll
seteq.ll
seteqz.ll
setge.ll
setgek.ll
setle.ll
setlt.ll
setltk.ll
setne.ll
setuge.ll
setugt.ll
setule.ll
setult.ll
setultk.ll
sh1.ll
shift-parts.ll
simplebr.ll
Change the default branch instruction to be the 16 bit variety for mips16.
2013-11-12 02:27:12 +00:00
sint-fp-store_pattern.ll
sitofp-selectcc-opt.ll
sll1.ll
sll2.ll
small-section-reserve-gp.ll
spill-copy-acreg.ll
sra1.ll
sra2.ll
srl1.ll
srl2.ll
stack-alignment.ll
[mips] Partially revert r193641. Stack alignment should not be determined by
2013-11-11 21:49:03 +00:00
stackcoloring.ll
stacksize.ll
stchar.ll
stldst.ll
sub1.ll
sub2.ll
swzero.ll
tailcall.ll
[mips] Make sure there is a chain edge dependency between loads that read
2013-11-09 02:38:51 +00:00
tls16_2.ll
tls16.ll
tls-alias.ll
tls-models.ll
tls.ll
tnaked.ll
trap1.ll
[Mips] Adjust float ABI settings in case of MIPS16 mode.
2013-11-19 12:20:17 +00:00
trap.ll
uitofp.ll
ul1.ll
unalignedload.ll
vector-load-store.ll
vector-setcc.ll
weak.ll
xor1.ll
zeroreg.ll
