32 lines
1.3 KiB
Markdown
32 lines
1.3 KiB
Markdown
# Olimex iCE40HX8K-EVB + ICE40_IO support
|
|
|
|
This adds support for building the apple one design for [Olimex iCE40hx8k-evb board](https://www.olimex.com/Products/FPGA/iCE40/iCE40HX8K-EVB/open-source-hardware) with attached [Olimex iCE40-IO extension](https://www.olimex.com/Products/FPGA/iCE40/iCE40-IO/open-source-hardware) for vga and ps2
|
|
|
|
## Peripheral support
|
|
|
|
VGA port is working throught the iCE40-IO expansion.
|
|
|
|
A usb-serial converter can be attached on pins 5(RX), 7(TX), 9(CTS) on either the iCE40-IO extension or witout it directly to the header of the FPGA board (pin out is the same).
|
|
Consult the schematics for [iCE40-IO](https://github.com/OLIMEX/iCE40-IO/raw/master/ICE40-IO_Rev_A.pdf) and
|
|
[iCE40HX8K-EVB](https://github.com/OLIMEX/iCE40HX8K-EVB/blob/master/HARDWARE/REV-B/iCE40HX8K-EVB_Rev_B.pdf) for extension header pinmap.
|
|
|
|
This port is using 1 PLL for generating the target 25Mhz clock.
|
|
|
|
## Building
|
|
Install a recent IceStorm toolchain, and:
|
|
|
|
```
|
|
$ cd yosys
|
|
$ make
|
|
```
|
|
|
|
## Use
|
|
|
|
There are 2 possible ways for flashing the board:
|
|
|
|
1. [Olimex OLIMEXINO-32U4 as programmer](https://www.olimex.com/wiki/ICE40HX1K-EVB#Preparing_OLIMEXINO-32U4_as_programmer)
|
|
|
|
2. [Iceprog with Raspberry PI](https://www.olimex.com/wiki/ICE40HX1K-EVB#Iceprog_with_Raspberry_PI)
|
|
|
|
To load BASIC type "E000R" with CAPS LOCK on.
|