- swap numbering of row select protection diodes for cleaner PCB labeling
- clarify labeling on GPIO pins on the MCU
- bump rev to 2.4 to indicate work in progress. Release will be 2.5.
- asdf_modifier.c: refactor CAPS LOCK setting and add LED setting
- asdf_arch_atmega328p.[ch]: add in LED definitions and functions
- add dummy asdf_arch_caps_led() function to arch files so test can compile.
- asdf_keymaps_select_keymap() function to select a keymap
- asdf_keymaps_select_n_{set|clear} functions to set a bit in keymap number,
to support dip switches.
- Added C preprocessor macros to determine largest key matrix, so enough space
may be allocated
- Cleaned up keymap definition macros for readability
- Created master keymap file to aggregate individual keymaps
- Modified make files to copy the specified master keymap
to asdf_keymap_defs.h during build.
- Added template keymap file.
- pulled in the right border and mounting holes for Apple-II mounting dimensions
- modified the "~^" key courtyard to allow closer positioning of the upper right
Apple II Mounting hole. (The ~^ key is not installed in an Apple II keyboard)
- Moved tracks and diodes as needed to keep everything in the new outline.
- Add extra key to the left side of row 4 to permit "inverted T" for those who
want it.
- Tiny shifts of several keys to correct key distances
- Include mounting holes with daughter board connector, to ensure consistency.
- Fix wrong direction DIP switch diodes
- Add buffers to permit ISP lines to also be used as output and LED drivers
- Allow 3 keyboard LEDs and 3 host outputs (RESET, CLEAR, BREAK, LOCAL, etc.).
- Outputs 1 and 3 are general purpose (can be open drain or driven). Output 2
is open collector (with optional on-board pullup).
- Add apple 2 mounting slots (and stretch PCB to accommodate slots
- Add pass-through holes in aligners for OSI keyboard spacers
- Move 'ESC' key next to '1' key
- Add TAB key next to Q key
- remove 'here is' and finalize "helper" keys along left side of keyboard
- move legends off of PCB traces
- update to release 1.3
- Break out initialization of SYS_RESET, CLEAR, STROBE, and CAPS LED into
separate functions.
- Emulate open collector output for SYS_RESET: OFF=input with weak pullup.
ON=output low.
- Add function to cap CAPS LED.
- add caps key function, similar to shift. This is intended for a DIP switch
setting to switch the keyboard between all CAPS and upper/lower modes.
- clean up the modifier state enums to include all legal values
- clean up the modifier index value calculation to improve readability.
- Separate the "asdf_keymaps.h" files into
-- "asdf_keymaps.h" which is not keymap dependent and contains keymap function
prototypes
-- "asdf_keymap_defs.h" which contains the keymap definitions
-- Move definitions of number of rows and columns from asdf.h to keymaps_defs.h.
-- keymap_defs.h is copied from the keymaps directory depending on which keymap
is specified in the Makefile.
-- Makefile fixes for the above changes
-- Fix includes in several files to reflect the above changes.
The "0" and "O" keys were swapped on the PCB, requiring a keymap fix for the
ASCII adapter. The swapped keys would not be an issue for a keyscanning ASCII
converter, but would preclude use in OSI systems, so this fix puts the keys
back in position compatible with OSI.
