Commit Graph

2324 Commits

Author SHA1 Message Date
George Oikonomou
5644e95fb6 Fix global interrupt manipulation 2015-05-15 09:21:00 +01:00
George Oikonomou
3f310e462f Tidy-up clock configuration 2015-05-15 09:20:59 +01:00
George Oikonomou
450550a7d1 Explicitly configure Srf pins for unused peripherals 2015-05-15 09:20:59 +01:00
George Oikonomou
7a189d010b Don't power on SERIAL in the Srf's board_init 2015-05-15 09:20:59 +01:00
George Oikonomou
00a6c31158 Improve OPT sensor driver and usage
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
2015-05-15 09:20:59 +01:00
George Oikonomou
3ab1b836c4 Configure button pins with hysterisis 2015-05-15 09:20:58 +01:00
George Oikonomou
7641aa89f2 Tidy-up macro semicol usage 2015-05-15 09:20:58 +01:00
George Oikonomou
0b6813513c Undefine CTS/RTS pins for the SmartRF 2015-05-15 09:20:58 +01:00
George Oikonomou
883c30b4ac Handle the configuration of the TMP_RDY pin 2015-05-15 09:20:58 +01:00
George Oikonomou
cee6c190c5 Use the BMP in 'forced' mode and reduce startup delay
In forced mode, the BMP will turn itself off after a reading
2015-05-15 09:20:57 +01:00
Antonio Lignan
b50ae639b3 Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor
Replace STH21 with HDC1000 for the CC2650 SensorTag
2015-05-15 10:12:08 +02:00
Brad Campbell
6eaada0c3f Delete old CoAP implementation
It seems that this implementation of CoAP in Contiki is no longer
maintained in favor of the `er-coap` implementation. This commit
removes the code to prevent confusion and further bit-rot.
2015-05-14 17:20:46 -04:00
Benoît Thébaudeau
c9324d133f Merge pull request #1060 from g-oikonomou/cc26xx/contrib/ihex
Produce ihex files usable with TI's Flash Programmer
2015-05-14 19:24:36 +02:00
Benoît Thébaudeau
d64927397f Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
2015-05-14 19:21:56 +02:00
Benoît Thébaudeau
71f22b1775 Merge pull request #966 from g-oikonomou/cc2538-startup-to-cpu-dir
Move cc2538 startup-gcc.c to the CPU dir
2015-05-14 18:43:39 +02:00
George Oikonomou
69c4f19336 Produce ihex files usable with TI's Flash Programmer 2015-05-14 13:22:11 +01:00
George Oikonomou
6507112b33 Remove SHT21 sources 2015-05-14 13:20:40 +01:00
George Oikonomou
d5f458509d Adjust the CC26xx README to reflect new sensors 2015-05-14 13:20:39 +01:00
George Oikonomou
1384030d6e Replace SHT21 with HDC1000 driver in the tag build 2015-05-14 13:20:39 +01:00
George Oikonomou
7e3b8d6fcc Add a driver for the HDC1000 sensor 2015-05-14 13:20:39 +01:00
George Oikonomou
a32598f658 Merge pull request #1059 from g-oikonomou/cc26xx/contrib/xxware-instructions
Update CC26xxware download instructions
2015-05-13 12:21:48 +01:00
George Oikonomou
96e1647270 Move cc2538 startup-gcc.c to the CPU dir 2015-05-13 01:31:10 +01:00
George Oikonomou
4de471478a Link and build tmp, vdd and als sensors 2015-05-12 23:42:20 +01:00
George Oikonomou
12ac8e1fb5 Initialise ADC in main, not in sensor drivers 2015-05-12 23:42:20 +01:00
George Oikonomou
3717522680 Re-work the CC2538 driver to be a driver for the Srf06 ALS only 2015-05-12 23:42:19 +01:00
Nicolas Tsiftes
44af0fa66b Merge pull request #1003 from adamdunkels/pr/http-socket-dns64-tcp-socket
New HTTP socket, DNS64, IP64 Cooja tests
2015-05-10 17:14:31 +02:00
George Oikonomou
351b16c43c Update CC26xxware download instructions 2015-05-10 14:53:05 +01:00
Adam Dunkels
64bae5b38d Include the ip64-addr module, to make http-socket compile 2015-05-10 10:51:12 +02:00
Adam Dunkels
4a85d49a09 Include a subplatform-conf.h, which may override configuration parameters set by the cooja/contiki-conf.h 2015-05-10 10:51:12 +02:00
Adam Dunkels
81391c11a7 Need to specify the target name, which allows us to have platforms that inherit from the cooja platform, like the cooja-ip64 platform 2015-05-10 10:51:12 +02:00
Adam Dunkels
bab1c48912 New Cooja platform designed for runnig IP64 routers for automated testing 2015-05-10 10:51:11 +02:00
George Oikonomou
447be526ae Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br
Enable slip-radio and rpl-border-router for CC26xx
2015-05-09 22:51:06 +01:00
George Oikonomou
598fd770b8 Merge pull request #960 from g-oikonomou/travis-arm-aapcs-tests
Test cc2538dk with the recommended toolchain
2015-05-09 22:31:18 +01:00
George Oikonomou
bd5e35c968 Merge pull request #1052 from simonduq/packetbuf-cleanup
Packetbuf cleanup
2015-05-09 22:30:21 +01:00
Simon Duquennoy
bb76bb8beb Remove unused flag SICSLOWPAN_CONF_ACK_ALL. Include packetbuf attribute PACKETBUF_ATTR_RELIABLE only when RIME is compiled. 2015-05-06 16:34:26 +02:00
George Oikonomou
d808978149 Improve platform README 2015-05-03 22:36:04 +01:00
George Oikonomou
0327eea109 Printf Driverlib version at startup 2015-05-03 22:36:04 +01:00
George Oikonomou
77874dc02b Remove unused configuration defines 2015-05-03 22:36:03 +01:00
George Oikonomou
f83c4e7286 Improve code style 2015-05-03 22:36:03 +01:00
George Oikonomou
1d97e7e11e Improve Reed Relay macro and comments for clarity 2015-05-03 22:36:03 +01:00
George Oikonomou
8c55bc3f3d Remove obsolete/unused make variables 2015-05-03 22:36:03 +01:00
George Oikonomou
a72d90e283 Control TCP MSS in the project's conf 2015-05-03 13:31:03 +01:00
George Oikonomou
364fc9cacf Define button_sensor in contiki-conf.h 2015-05-03 13:30:59 +01:00
Oliver Schmidt
05d98ffca3 Adjusted some Win32 config values. 2015-05-02 00:17:53 +02:00
Oliver Schmidt
9aee07c9ad Leverage the recently added exec() cmdline support in the cc65 C library for the Apple ][. 2015-04-26 21:45:33 +02:00
Oliver Schmidt
a824722862 Merge remote-tracking branch 'upstream/master' 2015-04-26 14:35:40 +02:00
Nicolas Tsiftes
8f50d9709d Merge pull request #999 from adamdunkels/lebrush-rdnss-support-rebased
RDNSS support, again
2015-03-30 17:21:23 +02:00
George Oikonomou
7238a1628f Merge pull request #1004 from alignan/z1-reed-sensor
Added Reed Sensor driver, example, and minor fix to the SHT25 sensor driver
2015-03-30 15:05:05 +01:00
Antonio Lignan
b9334a3b0e Added Reed Sensor driver and example 2015-03-30 10:30:09 +02:00
Gaëtan Harter
d0232bb20d Remove unused UIP_CONF_ND6_ defines in platforms
UIP_CONF_ND6_MAX_PREFIXE
  UIP_CONF_ND6_MAX_DEFROUTERS
2015-03-24 13:09:29 +01:00
Gaëtan Harter
697d8c0d23 Remove siclowpan compressions define in platforms
Several platforms defined compressions modes values:

    SICSLOWPAN_CONF_COMPRESSION_IPV6
    SICSLOWPAN_CONF_COMPRESSION_HC1
    SICSLOWPAN_CONF_COMPRESSION_HC01

instead of using the global SICSLOWPAN_COMPRESSION_LEVEL definitions
2015-03-24 11:40:32 +01:00
Gaëtan Harter
60719b8239 Remove unused SICSLOWPAN_CONF_CONVENTIONAL_MAC 2015-03-24 11:18:25 +01:00
Antonio Lignan
64fd000e5d Removed duplicated condition in sht25 configuration 2015-03-11 14:25:23 +01:00
Antonio Lignan
1af29a5beb Added SHT25 sensor 2015-03-10 15:33:58 +01:00
George Oikonomou
cd219e206c Adjust the cc2538dk readme to reflect travis test changes 2015-03-02 08:41:53 +00:00
George Oikonomou
0ba7f8df52 Merge pull request #951 from hrzr/master
Make the CC2538DK button sensor clearer to work with
2015-02-28 15:14:53 +00:00
Jonas Olsson
c9071b6952 Add CC26xx common platform files 2015-02-25 13:12:20 +01:00
Jonas Olsson
b385933fa8 Add SensorTag CC2650 files 2015-02-25 13:11:09 +01:00
Jonas Olsson
c7d85c3ea5 Add Srf06EB + CC26xx EM files 2015-02-25 13:10:26 +01:00
Oliver Schmidt
da536cb07c Removed superfluous AppleCommander parameters. 2015-02-21 17:16:08 +01:00
Mikhail Gaivoronskii
3f2869824c Uncrustified platform/cc2538dk/dev/button-sensor.c 2015-02-20 21:53:33 +05:00
Nicolas Tsiftes
e58aae1dcd Merge pull request #950 from patoman007/master
Fix: Misconfigurations to compile for avr-zigbit platform
2015-02-17 09:41:20 +01:00
George Oikonomou
6bd8bb05f6 Improve wording 2015-02-16 10:17:58 +01:00
George Oikonomou
72914369e8 Re-structure CC2538 doxygen module hierarchy 2015-02-16 10:17:58 +01:00
George Oikonomou
8751e55c94 Improve wording, fix warnigs in the SSI/SPI docs 2015-02-16 10:17:58 +01:00
George Oikonomou
b6bd556805 Fix clock.h warnings caused by multiple, conflicting documentation blocks of clock functions 2015-02-15 21:48:30 +01:00
George Oikonomou
fb22e15844 Fix warnings caused by incorrect param names / undocumented params 2015-02-15 20:11:08 +01:00
Nicolas Tsiftes
277dc8e174 Merge pull request #826 from alignan/fix_octal
Remove leading zeros from node id
2015-02-11 22:35:02 +01:00
Thomas Weber
f06bd06b79 corrected line - #if UIP_CONF_IPV6 - in contiki-rcb-main.c to - #if NETSTACK_CONF_WITH_IPV6 - 2015-02-02 22:08:35 +01:00
PAtO!
2c2b930648 Fix: Misconfigurations to compile for avr-zigbit platform 2015-01-29 14:31:47 -03:00
Thomas Weber
d575f1a6ce added missing modules in Makefile.avr-rcb, added netstack init functions (to start the at86rf230, modified macros to increase the buffersize) 2015-01-17 19:19:16 +01:00
Víctor Ariño
ccc0d27da0 Integrates uip-nameserver API
On the same commit the src have been uncrustified and some typo
fixes as well as includes missing.
2015-01-09 09:44:06 +01:00
George Oikonomou
8fe5456588 Change default PAN ID for the CC2538DK platform to 0xABCD 2014-12-08 22:33:33 +00:00
George Oikonomou
73a133373a Change CC2530DK default PAN ID to 0xABCD and make it configurable by project-conf.h 2014-12-08 22:33:11 +00:00
Simon Duquennoy
c2ca3e9fdb Cleanup UIP_CONF_IPV6_RPL configuration 2014-12-02 12:38:55 +01:00
Simon Duquennoy
6891bcdd20 Remove unneeded module inclusion from avr and seedeye platforms 2014-12-01 21:06:01 +01:00
Simon Duquennoy
0d9815e08b WITH_UIP6 -> NETSTACK_CONF_WITH_IPV6 2014-12-01 21:04:54 +01:00
Simon Duquennoy
a9cc909794 Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_* 2014-12-01 21:02:57 +01:00
Simon Duquennoy
229c53a2e6 Cooja platform: do not include the rime module by default 2014-12-01 20:13:10 +01:00
Simon Duquennoy
e85f41ffa0 Get IPv6 to fit in micaz platform again 2014-12-01 20:13:09 +01:00
Simon Duquennoy
722b3258d1 Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack. 2014-12-01 20:13:09 +01:00
Nicolas Tsiftes
d820feadd6 Merge pull request #792 from wchyan/master
atmega128rfa1: Fix the default build error
2014-11-28 19:23:26 +01:00
Nicolas Tsiftes
69c76c9f2f Merge pull request #872 from Bocci83/master
Seedeye platform: add the explicit list of modules
2014-11-28 19:21:52 +01:00
Nicolas Tsiftes
9b90c378e8 Merge pull request #812 from kkrentz/packetbuf-holds-broadcast
packetbuf_holds_broadcast()
2014-11-28 19:15:19 +01:00
kkrentz
7b63217a32 ContikiMAC: Default to contikimac_framer when using Rime over ContikiMAC 2014-11-25 04:56:09 -08:00
Stefano
a5550fa083 Seedeye platform: add the explicit list of modules 2014-11-21 14:36:23 +01:00
Antonio Lignan
e8c49dd29e Remove leading zeros from node id 2014-11-20 14:48:28 +01:00
Nicolas Tsiftes
866bb99944 Merge pull request #860 from simonduq/frame802154-align
frame802154_t: make sure dest_addr and src_addr are aligned
2014-11-18 08:59:30 +01:00
kkrentz
fb00a217f5 packetbuf: Use packetbuf_holds_broadcast() all-over 2014-11-13 09:58:08 -08:00
Enrico Joerns
b0206e2f58 [doc] avr-raven: Fix placement of description for ravenserial group
Note: The raven-lcd-interface and raven-ipso modules in atmega128rfa1
seem to be needles for this platform and might be there only because of
copy&paste from the raven platform. Should be removed in a later patch.
2014-11-10 23:53:34 +01:00
Enrico Joerns
846fd567d4 [doc] avr-atmega128rfa1: add to parent platform group 2014-11-10 23:53:34 +01:00
Enrico Joerns
d4cf5ef5a1 [doc] Added minimal doxygen anchor for each platform currently available in Contiki
Already existing label names and titles were retained
2014-11-10 23:53:34 +01:00
Enrico Joerns
0288f867ce [platform/native] Add to doxygen tree 2014-11-10 23:53:32 +01:00
Enrico Joerns
9dd7f1d29a [doc] added faulty esb and msp430 references 2014-11-10 23:53:32 +01:00
Enrico Joerns
0b8769e576 [doc] Various fixes for doxygen grouping etc. 2014-11-10 23:53:32 +01:00
Simon Duquennoy
6b7017452b frame802154: move inclusion of linkaddr.h from .h to .c file 2014-11-10 15:43:32 +01:00
Fredrik Österlind
0a2804fd69 Merge pull request #846 from ejoerns/pull-req/cooja-platform
Cooja platform fixes
2014-11-05 15:21:18 +01:00
Enrico Joerns
0d12bcffcb [cooja-platform] Fixes for slip-bridge compatibility
* Added dev/uart1.h header file to cooja platform
* Added slip arch stub
* Suppress examples putchar definition as cooja platform provides its own

Note that the uart1.h file should only be an intermediate solution.
A generic contiki-wide definition for uart handling is required as each
platform defines its own varying set of uart functions.
2014-11-04 00:14:06 +01:00
Enrico Joerns
5a4c2e0d1f [cooja-platform] Add cast to linkaddr_t to avoid warning 2014-11-04 00:09:45 +01:00
Enrico Joerns
f8445ba1bd [cooja-platform] Remove unused variable 'shortaddr'
This variable was set but never used in the code
2014-11-04 00:09:45 +01:00
Enrico Joerns
2bc1e08f19 [cooja-platform] Include eeprom.h to avoid implicit declaration warning 2014-11-04 00:09:45 +01:00
Antonio Lignan
ef6c351d0c Add function to change I2C baudrate and push relevant configuration values to platform config 2014-10-20 14:23:36 +02:00
Nicolas Tsiftes
0d39ee96ad Merge pull request #820 from alignan/serialnum_as_nodeid
Use the Z1 product ID as MAC/Node ID if no value is found in XMEM
2014-10-20 11:38:11 +02:00
Nicolas Tsiftes
27cde1ff81 Merge pull request #824 from alignan/fix_warnings
Warning fixes
2014-10-20 11:16:36 +02:00
Antonio Lignan
cceb97059c Use the Z1 product ID as MAC/Node ID if no value is found in the XMEM 2014-10-20 10:36:49 +02:00
Antonio Lignan
c836fbfbd9 Fixes warnings, bad code and code style 2014-10-20 10:28:00 +02:00
Moritz 'Morty' Strübe
c0783e2841 sky: Initialize energest as early as possible
If energest is initialized too late, the radio is not accounted
until the first switch. This is a problem when the radio is always
listening.
2014-10-09 09:42:56 +02:00
Mariano Alvira
e803a654b4 Merge pull request #684 from SmallLars/2nd-button
Enabled 2nd button on platform econotag
2014-10-08 14:05:24 -05:00
Adam Dunkels
d891d11324 Merge pull request #557 from kkrentz/llsec-integration
Integration of Link Layer Security
2014-10-08 15:45:46 +02:00
Antonio Lignan
5bbb0cabbc Added battery capability to Z1 platform 2014-10-08 11:53:09 +02:00
Antonio Lignan
343a3d3f7b Added missing radio capability define to Z1 platform config 2014-09-24 11:42:55 +02:00
Weichuan Yan
7b6439bd6f atmega128rfa1: Fix the default build error
Fixing from http://sourceforge.net/p/contiki/mailman/message/32494852/

Signed-off-by: Weichuan Yan <yan.weichuan@gmail.com>
2014-09-18 08:53:32 +08:00
Atis Elsts
0e9c051485 Fix time accounting on TI EXP5438 MSP430x5438a experimenters board 2014-08-21 18:10:53 +02:00
Nicolas Tsiftes
35b6032c64 Merge pull request #745 from PaulCorbalan/patch-1
Add PLATFORM_HAS_RADIO in Sky Platform
2014-08-18 15:08:37 +02:00
kkrentz
94d2b519e4 aducrf101mkxz: added llsec module 2014-08-05 09:15:40 -07:00
kkrentz
2cf7d98cad ContikiMAC: Create and parse ContikiMAC header in special framer; Expanded framer interface
to allow for creating and securing frames in advance; Create and secure frames in advance when sending bursts; Do neither recreate nor resecure frames that come from phase
2014-08-05 05:07:06 -07:00
kkrentz
c15a05aee1 Sky: Use the cc2420_aes_128_driver by default 2014-08-05 05:07:06 -07:00
kkrentz
c6a98f2968 CC2420: Turned SPI macros to functions and removed redundant AES API 2014-08-05 05:07:06 -07:00
kkrentz
c032b67969 llsec: Noncompromise-resilient 802.15.4 security 2014-08-05 05:07:05 -07:00
kkrentz
7943751b16 Sky: DEBUG on/off switch 2014-08-04 01:09:57 -07:00
kkrentz
c7b394c51b Sky: Calling NETSTACK_LLSEC.bootstrap from contiki-sky-main.c 2014-08-04 01:09:57 -07:00
kkrentz
c396a85364 llsec: Added a layer in between NETSTACK_MAC and NETSTACK_NETWORK for implementing link layer security 2014-08-04 01:09:57 -07:00
Jim Paris
9b76c2fb17 aducrf101: Adjust default buffer sizes to fit better in available RAM 2014-07-29 18:25:55 -04:00
Adam Dunkels
62b8aafb03 Merge pull request #722 from royscheefhals/contiki-fix
char * data to void * data parameter in process_start
2014-07-28 22:04:36 +02:00
Nicolas Tsiftes
582bfcb8c6 Merge pull request #696 from sieben/doc
Correct several doxygen tags (\file,...)
2014-07-28 11:42:41 +02:00
Rémy Léone
8c3fa17ec0 Correct several doxygen tags (\file) 2014-07-28 11:11:45 +02:00
George Oikonomou
95e2cd9021 Merge pull request #732 from camilorodegheri/patch-1
Update README.md
2014-07-27 22:55:00 +01:00
Jim Paris
6db05caed9 Fix radio hangups when trying to transmit with radio off.
The border-router tries to transmit and do other stuff after turning
the radio off, and the radio driver didn't handle that very well.
With this fix, it's no longer necessary to reset the border router
after starting tunslip6.
2014-07-23 16:21:53 -04:00
Jim Paris
6937b29670 Add Windows build instructions for ev-aducrf101mkxz platform 2014-07-23 16:21:53 -04:00
Jim Paris
07201d13a3 Add IAR compiler support for ADuCRF101 2014-07-23 16:21:53 -04:00
Jim Paris
4f1fc3557c Add README.md for ev-aducrf101mkxz platform 2014-07-23 16:21:53 -04:00
Jim Paris
ad141b00fb Implement rtimers for ADuCRF101 2014-07-22 21:18:16 -04:00
Jim Paris
c8716f4d57 Add platform LED driver 2014-07-22 21:18:16 -04:00
Jim Paris
63692ba96d Add button sensor support (BOOT button) 2014-07-22 21:18:16 -04:00
Jim Paris
4cb97a3311 Move RF RX into its own process 2014-07-22 21:18:16 -04:00
Jim Paris
b7373edf8c Add ADuCRF101 radio driver 2014-07-22 21:18:16 -04:00
Jim Paris
5673b46e86 Add initial EV-ADuCRF101MKxZ platform support 2014-07-22 21:18:16 -04:00
Nicolas Tsiftes
784b20c04d Merge pull request #739 from alignan/merge_z1sp_with_z1
Merges Z1SP into Z1 platform
2014-07-04 22:03:27 +02:00
Oliver Schmidt
9ee1bae150 Only wait for a keypress if the user is told to press a key. 2014-07-04 19:33:35 +02:00
Antonio Lignan
5467674fcc Merges Z1SP into Z1 platform 2014-07-04 10:41:05 +02:00
Pablo Corbalán
a490986401 Add PLATFORM_HAS_RADIO in Sky Platform
In order to use the er-server-example Radio resource it is required that the platform defines that it has a radio. This line might be required in other platforms.
2014-07-03 14:59:13 +01:00
Rémy Léone
f111058472 Removing trailing whitespaces 2014-06-30 20:01:05 +02:00
Ian Martin
6ae6c4768e rl78: Change RIMEADDR_CONF_SIZE to LINKADDR_CONF_SIZE because the rimeaddr module has been renamed to linkaddr. 2014-06-28 22:07:57 -04:00
Camilo Rodegheri
a50e933f4b Update README.md
Adding new command for ftdi_sio which applies to Kernel>3.12 used by Ubuntu 14.04 LTS
2014-06-21 15:04:48 -03:00
Antonio Lignan
3d64b80e40 Added flags to enable 20-bit support from msp430-gcc 4.7.x 2014-06-17 12:55:08 +02:00
Nicolas Tsiftes
4c5fa6ff5d Merge pull request #713 from adamdunkels/pr/drop-iris
Remove the unmaintained iris platform
2014-06-13 12:57:52 +02:00
Roy Scheefhals
1058ea986a Changed the parameter 'char * data' of process_start to the
type process_data_t. This was an artifact when the choice was
made to use the void * type for the data parameter in processes.

Changed parameter 'void * data' of process_post_synch to
process_data_t for consistency.

Checked all the uses of process_start() in contiki and fixed casts
of the data parameter.
2014-06-12 13:40:28 +02:00
Adam Dunkels
9ceb059c21 Merge pull request #611 from nfi/cc2x20-sfd-config
Corrected CC2x20 sfd config and startup message.
2014-06-11 23:17:05 +02:00
Adam Dunkels
d7e4443ab2 Remove the unmaintained iris platform 2014-06-11 19:52:19 +02:00
Nicolas Tsiftes
da8e9a3e8d Merge pull request #655 from atiselsts/stm32_patches
Fix inconsistent usage of short/long integer type in mbxxx platform's configuration file.
2014-06-07 23:21:59 +02:00