Commit Graph

587 Commits

Author SHA1 Message Date
adamdunkels
9d751da8e5 Disable SFD interrupt by default 2010-01-19 13:11:23 +00:00
adamdunkels
acea0afb35 Enable a flag when packet SFD seen 2010-01-19 13:11:01 +00:00
adamdunkels
2772d31ae6 Turn off Timer A before modifying its control registers to avoid problems when timer is updated frequently 2010-01-18 21:17:11 +00:00
nifi
a364213180 IRQ_PORTx is no longer used. Instead returning port number. 2010-01-14 20:05:58 +00:00
nifi
a937f8626c removed files no longer used with new sensor APIs 2010-01-14 18:10:31 +00:00
zdshelby
c5ecde4ca0 Fixes and improvements from Anthony Asterisk
- First in 8051def.h,  it appears the uip_arch-asm.S file was copied from z80 and am unsure it will work properly.  I modified the 8051def.h to prevent the UIP code from using these routines.
- In dma.c the config routine provides access to all of the DMA channel options, except for the word mode flag.  In order to maintain compatibility with any existing code I created a second routine and converted the original routine into a wrapper routine with a fixed word mode value.
- uart.c::uart0_init was missing blocking access to the higher baud rates.  I am not sure why, so I corrected this.
- I also copied over to header files that provide some useful macros from the msp430 cpu.  The files are lpm.h and hwconf.h.  The lpm.h is for switching power modes, I think.  The hwconf.h has various macros for configuring port I/O.  By porting these files the led/button api's can be ported with minimal modifications.
2009-12-22 09:28:14 +00:00
matsutsuka
23d5f84a46 Workaround for compiling some examples available 2009-12-16 06:47:17 +00:00
matsutsuka
ebe74fed56 size-optimization option and peep-hole optimizer have been introduced.
object files have been moved to binary directory
2009-12-11 14:59:31 +00:00
adamdunkels
9ac4109bad Increased the clock speed to 32768/4 from 32768/8 to provide better accuracy for power profiling of radio CCA checks 2009-12-09 12:55:35 +00:00
adamdunkels
f9260c4fae Enable interrupts during the periodic clock processing to allow rtimers to execute on top of the clock 2009-12-08 23:40:14 +00:00
adamdunkels
a4df6e0fbf Remove the read from TAIV - this should not be done for TIMERA0 interrupts (in fact, doing so messes up the other timer a interrupts, like the clock tick...) 2009-12-08 23:39:45 +00:00
adamdunkels
873f4d0222 Need to clear the interrupt flag register for Timer A 2009-12-07 14:32:16 +00:00
adamdunkels
e3fed27f4a Broke out the CC2420 SFD interrupt into a separate file to allow easier overloading with project-specific files 2009-12-05 19:42:56 +00:00
nifi
efdbbf9fe3 minor cleanup: random.c is already included in Makefile.include 2009-11-19 17:33:05 +00:00
nifi
4f2318152e Added support for CPU speed 2.4576MHz and configuration to enable/disable interrupt driven TX 2009-11-18 15:45:32 +00:00
nifi
2640f9bf26 Must check error flag before reading. Removed leds debug. 2009-11-18 13:24:12 +00:00
adamdunkels
790f2f632a Moved putchar into separate file to make it easier to override its implementation 2009-10-30 15:06:26 +00:00
fros4943
53d03aa924 uart correction values for 3.9Mhz (default sky freq.) 2009-10-27 16:25:28 +00:00
oliverschmidt
fda46f6800 - cc65 2.13. allows to define all necessary paths through the single env var CC65_HOME.
- cc65 2.13. allows to override the stacksize from the linker command line thus eliminating the need for linker configs maintained by Contiki.
- cc65 2.13. integrates the startup code with the library. In 2.12. the startup code pulled in main(). Now main() is supposed to pull in the startup code. But  if main() resides itself in a library (as with Contiki) then nothing is pulled in at all :-(. The workaround is to pull in main() explicitly through the new option -u (working like the same GCC option).
2009-10-18 11:34:38 +00:00
oliverschmidt
31eb62821f cc65 2.13. features a default-per-target mouse driver so there's no need to deal with their names in Contiki anymore. 2009-10-18 09:33:08 +00:00
zdshelby
c89b700631 - Fixed the MAC/RF interface problems, now correctly working with sicslowmac. Tested with rf_test_tx and rf_test_rx. Still needs more thorough testing.
- Corrected a Makefile bug, was complaining about *.d missing
2009-10-15 12:43:53 +00:00
fros4943
b0291ca5a8 bug fix: wake up MSP430 when leaving rtimer interrupt if the rtimer polled a process.
thanks to Marco Vedovati for finding the bug
2009-10-06 09:21:46 +00:00
zdshelby
44a8bc056f - Added mtarch.c and mtarch.h back to /cpu/cc2430. Seems that mt.c needs mtarch.h even though we are not using mtarch right now in this port. 2009-09-29 14:38:51 +00:00
zdshelby
d98026ae03 - Added RF address setup function (byte order may not be correct)
- Fixed the interrupt and read functions, now receiving one frame correctly
- Improved the send and read functions to work with sicslowmac.c
- TODO: Still a MAC interaction problem. Although the exact same payload is received and sent up to the MAC as is sent, the MAC doesn't do anything with it. Turn on DEBUG in sicslowmac.c to see the problem.
- Removed mtarch files, not used currently
2009-09-11 08:07:12 +00:00
zdshelby
4a14db6d3a - Fixed a compilation problem caused by 2.3 root Makefile-include changes with regard to sdcc.
- Fixed a small typo in cc2430_rf.c
- examples/sensinode now compiles
2009-09-09 07:32:02 +00:00
zdshelby
c9954072c9 Initial commit of cc2430 cpu port files. Currently used by /platform/sensinode. 2009-09-08 20:07:35 +00:00
nifi
c6f7ef84fe Initialize the transmit ringbuffer before enabling TX interrupt 2009-09-08 10:39:49 +00:00
joxe
3e8c63cc09 added radio-makefile for avr + rf230 platforms 2009-09-07 12:05:12 +00:00
joxe
8890904aa2 moved radio specifics out of avr Makefile and added some rs232 defs in order to get MicaZ platform working 2009-09-07 12:02:58 +00:00
adamdunkels
18486d4e3d Patch by Gideon Ernst: use explicit $(CONTIKI) path instead of implicit ../../ path to the mknmlist script 2009-09-03 17:41:58 +00:00
dak664
d2a6637627 Block NS echoback from interface 2009-08-13 18:41:00 +00:00
dak664
d37115f2c0 ipv6 fixes and formatting 2009-08-11 16:06:17 +00:00
oliverschmidt
f930dadf9f There seems no reason for the whole set_ethaddr() thing if uip_setethaddr() doesn't get called after all. 2009-08-09 20:44:42 +00:00
dak664
72d5442e05 wpcap update for uIPv6 2009-08-08 19:51:25 +00:00
dak664
e64b3d8465 Experimental 64 bit Windows 7 drivers. They work with my Phenom. 2009-08-07 16:45:30 +00:00
oliverschmidt
738397b855 cc65 generates dependency files having the list of prerequisites start with a tab character.
The processing done in the canned command sequence FINALIZE_DEPENDENCY brings this tab character to the beginning of the line making the empty rule look like a command.

Therefore we replace the tab character in question with a blank.
2009-07-26 21:27:43 +00:00
dak664
283d288f1a Allow hello-world to build, fix makefile ignoring rf230bb 2009-07-26 12:10:38 +00:00
dak664
c1b7375a5a *** empty log message *** 2009-07-23 16:13:48 +00:00
dak664
7af93463b5 Remove compiler warnings 2009-07-23 16:10:42 +00:00
dak664
c62efce258 Add useful comment, fix compiler warnings 2009-07-17 13:47:10 +00:00
ksb
823bb613f3 STM32F10x headers from FWLib 2009-07-12 16:41:53 +00:00
ksb
baa0dd90c9 STM32F103 port 2009-07-12 15:52:28 +00:00
ksb
030933ee2e OpenOCD configuration for STM32F10xxx 2009-07-12 15:48:55 +00:00
ksb
e3fae627f5 Removed reference to obsolete header. Fixed HALTing when the SCSI handler fails. 2009-07-11 17:34:19 +00:00
ksb
53da57ba60 SCSI definitions 2009-07-11 15:25:43 +00:00
ksb
5a07631752 Common SD-card interface, implementing CFS using EFSL 2009-07-11 15:13:55 +00:00
ksb
2c00620fc8 Missing file 2009-07-11 15:10:40 +00:00
ksb
f2e4500f88 SCSI RBC 2009-07-11 14:50:08 +00:00
ksb
2c029597a1 Common USB functionality 2009-07-11 14:44:27 +00:00
ksb
44a83a12cd USB mass storage class 2009-07-11 14:43:13 +00:00
ksb
c5e62b7205 USB CDC-Ethernet class 2009-07-11 14:37:11 +00:00
ksb
659b3fb7d3 USB CDC-ACM class 2009-07-11 14:30:53 +00:00
ksb
195c23aaa4 printf-style output intended for debugging. Uses less memory and is more flexible than the newlib implementation. 2009-07-11 14:26:28 +00:00
ksb
1f72d3ea32 Moved and updated code for AT91SAM7S 2009-07-11 14:22:45 +00:00
ksb
1658d6b42c Older ELF-loader code, may not work any longer 2009-07-11 14:18:50 +00:00
ksb
4a82069f15 OpenOCD configuration for SAM7S. Should be merged into ../../common/openocd 2009-07-11 14:18:01 +00:00
matsutsuka
c55d3ded6c restored specific compilation option since SDCC seems not supporting -MDD very well
introduced a snprintf macro as empty function
2009-07-09 18:26:55 +00:00
dak664
1de298c72a *** empty log message *** 2009-07-08 16:17:07 +00:00
dak664
49989dbe45 Add rf230bb radio driver with conditional make on RF230BB=1 2009-07-08 15:26:17 +00:00
dak664
9aee8dbc16 Fixed bug of no current consequence 2009-07-05 18:50:44 +00:00
oliverschmidt
7a228fea41 Replaced classic approach of generating dependency files via rule with generating them as side effect of generating object files. The issue with "No rule to make target ..." is solved as suggested in http://make.paulandlesley.org/autodep.html.
At least with gcc (and cc65) the dependency files are generated without an additional run of the C compiler. This is especially beneficial on Cygwin because of the fork() performance issue.
2009-07-02 22:36:04 +00:00
adamdunkels
00890caca8 Make sure that symbols.c is included in every native cpu build, not just the native target 2009-05-12 17:23:23 +00:00
nvt-se
172ffb74c7 fix compiler warnings. patch from Jesper Karlsson. 2009-04-08 14:56:00 +00:00
nifi
1c6264fddc reordered build path to use cpu files before core 2009-04-06 13:10:14 +00:00
nifi
43c2ccf5d8 fixed clock_seconds to use full 32 bit 2009-04-06 13:08:42 +00:00
nifi
c1d490b6a7 added workaround for memcpy/memset bug in mspgcc 2009-04-06 13:07:37 +00:00
joxe
4f41b30b2b fixed variable names 2009-04-02 22:39:29 +00:00
joxe
7d2a08b29c added initial set-up code SFD capture interrupts usable for exact packet timestamping 2009-04-02 22:23:06 +00:00
adamdunkels
727c5a2dbe Renamed serial module to serial-line 2009-03-17 20:32:22 +00:00
adamdunkels
b20f0884ed Renamed serial module to serial-line 2009-03-17 20:19:11 +00:00
adamdunkels
0076bfe8a5 Changed the name of the 'serial' module to 'serial-line' to signify that the module is about lines of data from the serial port, not individual bytes, and to make sdcc happy 2009-03-17 15:56:32 +00:00
fros4943
4275ff4a9c added support for 64-bit architectures, as already added on the cooja mtarch clone (patch provided by Jesper Karlsson and David Gustafsson) 2009-03-13 15:02:23 +00:00
fros4943
da8ee90ef3 reverted last commit (sorry, committed wrong file.. :) 2009-03-13 14:49:10 +00:00
fros4943
d6ebba536c minor 64 bit fix: divide by sizeof(unsigned long) instead of constant 4 2009-03-13 14:40:07 +00:00
adamdunkels
65eb5fd4e8 Renamed the rimebuf module to packetbuf to signal that the module is used outside of a pure Rime context (e.g., the sicslowpan code uses it). 2009-03-12 21:58:20 +00:00
adamdunkels
62ef4002a5 Always prod the watchdog on output to avoid spurious resets during long serial outputs 2009-03-02 22:01:26 +00:00
adamdunkels
6ab7ac0598 Added optional interrupt-based transmission, based on the ringbuf library 2009-03-01 20:40:30 +00:00
oliverschmidt
1585077da7 Adjusted cfs_seek() offset type configuration macro name. 2009-03-01 12:26:53 +00:00
oliverschmidt
d0b7d22229 Adjusted CFS implementations to the recent CFS API changes. 2009-02-28 11:45:35 +00:00
nvt-se
a0226e2418 switched all users of cfs_seek(x,y) to cfs_seek(x,y,CFS_SEEK_SET) 2009-02-27 14:28:02 +00:00
adamdunkels
e34e97cd6f Minor code style fixes 2009-02-24 21:30:20 +00:00
nvt-se
bff9841fbf Removed obsolete definitions. 2009-02-20 23:16:08 +00:00
joxe
80848e4106 added DCO-resync function and default config 2009-02-04 18:28:44 +00:00
joxe
5a8dc2df28 added handling function for checkin if uart is transmitting or receiving - patch by Klaus Stengel 2009-01-31 12:46:57 +00:00
oliverschmidt
3c2662519f Tried to make reference to Microsoft TechNet Forum thread more persistent. 2009-01-15 22:17:47 +00:00
nifi
9bf0dff605 Compile using . instead of separate make rules for .firmware 2008-12-16 13:54:25 +00:00
c_oflynn
5ec6412fbc *Support for Atmel 'Router Under Mac' (RUM) in Jackdaw 2008-12-10 21:26:05 +00:00
joxe
23b7db88d5 moved rtimer from TimerB to TimerA so that TimerB subsystem is free for other uses 2008-12-02 12:44:48 +00:00
c_oflynn
c0e2fd1110 Oops - as pointed out by Daniel Willmann change had a duplicate statement... fixed! 2008-11-29 18:36:12 +00:00
c_oflynn
9fb2c9d836 * Addition of Meshnetics Zigbig platform by Frederic Thepaut <frederic.thepaut@inooi.com>
* Changed default RavenUSB timeout to 3 seconds... seems to give most reliable transmissions
2008-11-29 15:55:02 +00:00
nifi
2013c4fece Simulator for MSP430-based platforms 2008-11-24 11:09:36 +00:00
fros4943
1fbcfde0d6 implemented support for data argument when starting threads:
given function is called from a wrapper instead of immediately returned to via the stack
2008-11-21 10:28:32 +00:00
oliverschmidt
4b268298cc Added infos on Vista loopback connection handling. 2008-11-17 22:38:05 +00:00
oliverschmidt
a844636218 Minor docu update. 2008-11-13 20:26:27 +00:00
c_oflynn
5ff23c0bec Addition of Atmel Radio Control Board (RCB), device in RZ200 kit 2008-11-09 15:39:49 +00:00
c_oflynn
b6e76a4947 Fixed serious bug which causes RNDIS task to end when non-data message are sent via RNDIS interface 2008-11-08 17:11:18 +00:00
c_oflynn
f13ec95efa *** empty log message *** 2008-11-08 03:29:15 +00:00
c_oflynn
e1463c25a0 Fixed bug that non-IPv6 would hang Jackdaw 2008-11-07 20:32:46 +00:00
c_oflynn
46853d9395 * Channel is saved in EEPROM
* Allow serial port to work with more term emulators
2008-10-27 18:03:25 +00:00
c_oflynn
ebb335335a *Added ability to change channel Jackdaw (raven USB) operates on over serial menu 2008-10-26 01:27:55 +00:00
c_oflynn
219846f408 Addition of USB files 2008-10-14 20:16:36 +00:00
c_oflynn
a520fe4646 Lots of changes / commits! This allows ravenusbstick example to build at least. 2008-10-14 19:06:51 +00:00
c_oflynn
6e3ee0d917 More updates for raven 2008-10-14 18:38:09 +00:00
c_oflynn
a73ed65dac Fixing more possible out of date files. 2008-10-14 18:37:28 +00:00
c_oflynn
15ba03fea5 Adding updated files 2008-10-14 18:36:07 +00:00
c_oflynn
9cc14d43ef Fixing some files... 2008-10-14 18:35:29 +00:00
julienabeille
2238f2e7da Debugged autoconf for ethernet 2008-10-14 16:50:11 +00:00
julienabeille
30f545c397 *** empty log message *** 2008-10-14 14:54:23 +00:00
julienabeille
085df124fd tapdev update for uIPv6 2008-10-14 14:38:10 +00:00
julienabeille
632a3585f5 Modification to tapdev for IPv6 support 2008-10-14 09:47:15 +00:00
adamdunkels
cdb6226598 Changes to support the Atmel AVR Raven port 2008-10-14 09:44:12 +00:00
adamdunkels
db7d9bb131 Radio and 802.15.4 MAC code for the Atmel AVR Raven board 2008-10-14 09:43:40 +00:00
nifi
49f57b7848 changed to use unsigned long for seconds counter 2008-10-10 12:36:58 +00:00
joxe
8748230ead changed usart code to handle LPM3 2008-09-18 17:59:27 +00:00
fros4943
b90075ea0a bug fix, msp430 hw bug (undocumented):
when in continuous/compare mode the interrupt handler may get called before CCR==TR.

behavior observed when the timer is toggled between STOP/CONT in an external interrupt handler (serial input).

possibly this problem may also affect watchdog timer/timer B
2008-09-16 12:00:48 +00:00
fros4943
3ec170cdf5 added empty mtarch_stop() 2008-08-27 13:10:29 +00:00
oliverschmidt
f822ac9797 Added clock_seconds() implementation. 2008-07-12 14:44:37 +00:00
adamdunkels
fc6d059d24 Added a clock_seconds() function prototype to core/sys/clock.h, that returns seconds in 32 bit format. On platforms like the MSP430, which has a 16 bit native datatype, this cannot be implemented with an interrupt tick that increments a 32 bit value because access is not atomic. Instead, the MSP430 code increments 16 bit seconds value and converts this into a 32 bit value through an offset calculation. If the new value is smaller than the last check, the offset is incremented by 65536. This change also means that CLOCK_CONF_SECOND must be a power of two because a modulo operation is used inside the periodic tick interrupt handler. 2008-07-07 23:38:09 +00:00
oliverschmidt
c9a8eea371 Added cfs_seek to the preprocessor level implementation of the cfs API. 2008-07-06 07:28:05 +00:00
nvt-se
6440c3de81 removed unnecessary inclusion 2008-07-04 03:03:41 +00:00
adamdunkels
62b7ef5173 Moved energest from lib/ to sys/ 2008-07-04 00:02:21 +00:00
adamdunkels
64b6663b11 moved energest from lib/ to sys/ 2008-07-03 23:59:20 +00:00
adamdunkels
871598fb24 Added dummy watchdog.c to allow compiling and running code that calls the watchdog functions 2008-07-03 23:10:25 +00:00
matsutsuka
d194d54e8e CC_CONST_FUNCTION replaces some const keywords in order to workaround a sdcc bug, which cannot handle function pointers as const. 2008-07-02 15:02:33 +00:00
adamdunkels
7c459c849d The .ihex file use the intermediate Contiki-wide .$(TARGET) target instead of the MSP430-specific .firmware 2008-07-02 14:11:34 +00:00
adamdunkels
66876625d4 Changed name of the simple-cc2420 module to cc2420: changed all function names and variable names from simple_cc2420_* to cc2420_*. 2008-07-02 09:05:40 +00:00
matsutsuka
29b17c6933 Modified some glitches in startup code, and introduced additional typedefs required in the current version. 2008-07-02 07:13:22 +00:00
adamdunkels
1586d8f36f Changed filename of the CC2420 driver from simple-cc2420 to cc2420. 2008-07-01 21:02:51 +00:00
adamdunkels
2569a8fc69 Removed unused file 2008-07-01 20:59:44 +00:00
adamdunkels
9d7c81d4ed Added missing IPBUF definition needed for IPv6 2008-06-23 19:53:16 +00:00
adamdunkels
d094fe254f Fixed problems with IPv6-enabled Windows XP 2008-06-23 19:52:44 +00:00
oliverschmidt
f6c310d90a I'd better don't try to be smart by including read access into every write access - as the cc65 CBM POSIX file I/O library doesn't allow for both reading and writing at all. 2008-06-16 11:20:22 +00:00
oliverschmidt
456d7ad45e Updated URL. 2008-06-13 20:08:06 +00:00
oliverschmidt
d619b095a9 Added some info on the high-level config macros (and other stuff). 2008-06-12 22:15:50 +00:00
oliverschmidt
929da590be Removed '!' as gnumake already adds '.'. 2008-05-22 19:43:08 +00:00
adamdunkels
31ea41d8db Changed the name of UIP_CONF_TCP_FORWARD to UIP_CONF_IP_FORWARD since forwarding is done at the IP level 2008-05-14 19:19:28 +00:00
joxe
57dedee38f enabled ADC IRQs if ADC sensors active 2008-04-25 15:53:55 +00:00
oliverschmidt
b7958e3472 Fixed minor copy&paste issue. 2008-03-29 15:22:39 +00:00
oliverschmidt
3d1d6e333c Added high level config macro for the new compiletime forwarding option. 2008-03-29 15:21:51 +00:00
oliverschmidt
e72ca9e5d4 Allow division by RTIMER_ARCH_SECOND to compile. 2008-03-28 22:38:03 +00:00
oliverschmidt
a500f2dd73 Removed unused variable. 2008-03-04 22:56:54 +00:00
oliverschmidt
a7e73d030a Added naive snprintf support. 2008-02-16 08:56:29 +00:00
adamdunkels
da49b950d4 Count the number of times the watchdog has been stopped to avoid starting it when someone else has stopped it 2008-02-11 10:45:19 +00:00
adamdunkels
660b7f9a78 Initialize watchdog instead of stopping and starting it 2008-02-11 10:44:49 +00:00
oliverschmidt
a685acd23a Turned rtimer_arch_now() from a (one line) function into a macro. 2008-02-09 14:02:12 +00:00
oliverschmidt
604a9c2bf0 Removed (now obsolete) PROCESS_LOADABLE. 2008-02-07 19:56:56 +00:00
adamdunkels
cf5ff2bbb2 Made SLIP code coexist with ordinary serial code. If WITH_UIP=1, the SLIP code is used instead. 2008-02-03 20:59:35 +00:00
adamdunkels
e68d669265 Added improvements suggested by Hardy Greich: define CPU speed in one place only (contiki-conf.h), added nop to XTAL settlement delay 2008-02-03 20:58:11 +00:00
adamdunkels
a4d5ca833c Update the periodic watchdog only if it is not stopped 2008-01-21 10:39:23 +00:00
adamdunkels
f2599b38e7 Added a WERROR variable, which, if set, causes -Werror flags to be turned on 2008-01-17 12:07:32 +00:00
adamdunkels
a46aceb5f8 Added generation of symbols.c if CORE is set 2008-01-08 08:04:41 +00:00
adamdunkels
e16b7ffcf0 Changed the return value of the inpt handler function to int so that it can wake up the CPU from LPM 2008-01-08 08:04:09 +00:00
adamdunkels
7f05b8a5ef Added a reboot function 2008-01-08 08:03:02 +00:00
adamdunkels
b50d2b02ee Reformatting to comply with code style 2008-01-08 08:01:41 +00:00
adamdunkels
345d0a8a79 Added a WERROR definition that can be used to turn -Werror on 2008-01-08 08:01:01 +00:00
oliverschmidt
b96c9deebc Added "usual" comments. 2008-01-04 21:53:32 +00:00
oliverschmidt
bb19396d21 Introduced yet another high-level config macro. 2008-01-01 19:47:03 +00:00
oliverschmidt
216d20dabb Allow to implement cfs API on preprocessor level using a "pfs" (platform file system) by setting a new high-level config macro. 2008-01-01 17:44:24 +00:00
oliverschmidt
faad65bddd Use cfs filesystem to allow for specific implementations. 2007-12-24 00:13:28 +00:00
oliverschmidt
93ff3add1f Use cfs filesystem to allow for specific implementations. 2007-12-23 15:37:28 +00:00
oliverschmidt
5592b1df6c Implement cfs API on preprocessor level using POSIX functions.. 2007-12-23 15:29:19 +00:00
oliverschmidt
fda38428d9 Introduced some more high-level config macros. 2007-12-23 13:55:38 +00:00
oliverschmidt
14a8cf7200 Made use of the new high-level config macros. 2007-12-23 12:33:57 +00:00
oliverschmidt
125f261b7d Introduced high-level macros to be set on the make command line. They allow easy configuration of Contiki for typical (cc65-)project scenarios. 2007-12-23 12:32:43 +00:00
oliverschmidt
0564cc50fd Splitted POSIX based cfs implementation to avoid pulling in potentially large POSIX directory I/O functions without needing them at all. 2007-12-21 01:36:01 +00:00
oliverschmidt
102e3e2a24 Make use of fastcall. 2007-12-21 01:13:44 +00:00
oliverschmidt
e4086d8374 Use cfs filesystem to allow for specific implementations (and make use of fastcall). 2007-12-21 01:04:29 +00:00
oliverschmidt
ae4978e994 Moved z80 specific line to z80 makefile. 2007-12-21 00:49:40 +00:00
oliverschmidt
1863f8aef2 Added generic ctk mouse implementation based on cc65 mouse drivers. 2007-12-20 22:47:39 +00:00
oliverschmidt
2c45596f5c Optimized non-logging scenario. 2007-12-20 20:49:59 +00:00
oliverschmidt
14fa993204 Define an empty rtimer_arch_now() macro to keep compiler happy. 2007-12-20 20:28:34 +00:00
oliverschmidt
333ad36a4a Added general ctk support to the cc65 build. 2007-12-16 17:03:27 +00:00
oliverschmidt
f55b3cfe0e So we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities. 2007-12-16 17:02:37 +00:00
oliverschmidt
8644822a34 Soe we're finally back at reducing the memory footprint be avoiding to pull in large C-library enitities. 2007-12-16 13:08:09 +00:00
oliverschmidt
805f3f87d3 Make the "empty" error_exit implementation the default to be optionally overridden. 2007-12-16 13:05:23 +00:00
oliverschmidt
b32f0643ab Moved stuff into sys subdir to clean up the apple2enh dir (and because the corresponding shared res. cpu stuff is in the sys dir as well). 2007-12-15 11:04:11 +00:00
oliverschmidt
e59252ab29 Moved stuff into sys subdir to clean up the 6502 dir (and because the corresponding shared stuff is in the sys as well). 2007-12-15 00:14:18 +00:00
oliverschmidt
983688bef6 Use C99 type to typedef Contiki types. 2007-12-15 00:06:27 +00:00
joxe
f997ec6231 fixed defs and to compile for atmega32 also - has no TCNT3 2007-12-11 17:21:14 +00:00
oliverschmidt
2bcabc061d Optimized to work with logging turned off. 2007-12-08 22:34:59 +00:00
oliverschmidt
382603b581 Made error_exit() implementation target-specific. 2007-12-08 22:21:50 +00:00
oliverschmidt
70321f690f Made error_exit() implementation target-specific. 2007-12-08 22:16:43 +00:00
oliverschmidt
4defaddf31 Avoid pulling in the DNS client. Later we'll want to have this configurable. 2007-12-08 21:48:49 +00:00
oliverschmidt
a54195ff04 Fixed to work with logging turned off. 2007-12-08 21:47:26 +00:00
oliverschmidt
69a16d89c5 Fixed typo. 2007-12-08 21:19:06 +00:00
oliverschmidt
a980f40bf6 Take in account that the C64 Retro Replay clockport needs to be activated in order to work with the RR-Net Ethernet card. 2007-12-08 21:05:48 +00:00
oliverschmidt
1afc872a29 cc65 has recently become more restrictive... 2007-12-06 10:36:33 +00:00
oliverschmidt
45988fdfd0 Fixed LAN91C96 driver. 2007-12-01 20:23:11 +00:00
oliverschmidt
9f1feb6e26 Added LAN91C96 driver. 2007-11-30 12:34:08 +00:00
oliverschmidt
66717d11ba Generic SMSC LAN91C96 driver for cc65 targets. The driver is intended to be loaded dynamically as relocatable module. It modifies itself to accomodate different Ethernet IO address locations:
- ETH64 ($DE10)
- Apple2 LANceGS ($C0x0)
2007-11-30 12:32:07 +00:00
oliverschmidt
b51a680a02 Minor optimization. 2007-11-29 21:56:55 +00:00
fros4943
3a0ba03407 added experimental avr rtimer-arch implementation
8 seconds wraparound
2007-11-29 02:44:05 +00:00
oliverschmidt
394d70c57d Added some info on the 6502 targets. 2007-11-28 18:19:14 +00:00
adamdunkels
95ffdc283e Forgot to remove -Werror 2007-11-28 17:17:19 +00:00
adamdunkels
7e89af8992 Removed -Werror -pedantic and -std=c99 because of problems with compiling under Linux 2007-11-28 17:15:15 +00:00
matsutsuka
80f858b68b typedef uint8_t, uint16_t, and uint32_t have been added to help some sources. 2007-11-28 09:36:06 +00:00
matsutsuka
fbb8fb409a The Micro-Executable Format (MEF) support (experimental). 2007-11-28 06:13:24 +00:00
oliverschmidt
9d39b4be54 Added global error_exit() and config read function to build. 2007-11-27 21:43:32 +00:00
oliverschmidt
6028fccc39 Added read function for a simple binary config file. 2007-11-27 21:42:02 +00:00
oliverschmidt
67af780c93 Made include paths consistent. 2007-11-27 20:54:10 +00:00
oliverschmidt
20824c5603 Make use of global error_exit(). 2007-11-27 20:52:52 +00:00
oliverschmidt
2ef0eec6f6 Made error_exit() globally available. 2007-11-27 18:17:47 +00:00
oliverschmidt
18d591206e Added (default) log implementation for cc65 targets. 2007-11-27 16:48:44 +00:00
oliverschmidt
689e0f077a Added some info on the wpcap driver. 2007-11-27 13:06:55 +00:00
adamdunkels
6e0e6e1279 Removed -Werror since LPM*_EXIT; and friends trigger an internal mspgcc compiler error 2007-11-26 23:23:20 +00:00
oliverschmidt
74c4e10f23 No reason to not just compile petsciiconv.c for all cc65 targets. 2007-11-25 21:43:55 +00:00
oliverschmidt
7fc383e100 Minor change in comment. 2007-11-24 12:57:09 +00:00
fros4943
2564882015 only create full symbols list if SYMBOLS is defined 2007-11-23 06:22:52 +00:00
oliverschmidt
5608e2d451 Minor adjustment to predominant coding style. 2007-11-22 11:41:18 +00:00
oliverschmidt
a2dd620ecc Allow the webserver and telnetd examples to build. 2007-11-22 11:40:17 +00:00
oliverschmidt
da44474fd4 Generic Ethernet driver for cc65 targets. The actual hardware driver is loaded as relocatable module. 2007-11-20 21:10:20 +00:00
oliverschmidt
e6e6ea415c Generic Cirrus Logic CS8900A driver for cc65 targets. The driver is intended to be loaded dynamically as relocatable module. It modifies itself to accomodate different Ethernet IO address locations:
- C64 TFE ($DE00)
- C64 RRNet ($DE08)
- Apple2 Uther ($C0x0)
2007-11-19 23:14:14 +00:00
oliverschmidt
9a96dbca03 Moved currently inconsistent files to backyard to clean up for release 2.1 2007-11-19 23:00:33 +00:00
joxe
a4985fd1f7 removed offset in rtimer_arch 2007-11-19 22:38:57 +00:00
ksb
437ba5bbf4 Removed warnings 2007-11-18 12:18:59 +00:00
oliverschmidt
d609db3580 Removed compiler warnings. 2007-11-18 01:36:59 +00:00
oliverschmidt
eabf01903d Replaced most type definitions with reference to stdint.h. 2007-11-17 23:42:23 +00:00
oliverschmidt
b8b6b6239e Allow to build both with Cygwin and VC++. 2007-11-17 21:33:53 +00:00
oliverschmidt
eb3fda68c7 Source reformatting only. 2007-11-17 20:00:42 +00:00
adamdunkels
1e1e44a3f8 Fixed compiler warnings to make code compile with gcc's -pedantic switch 2007-11-17 18:01:00 +00:00
adamdunkels
1070fe19a3 Added rtimer_arch_now prototype 2007-11-17 10:47:22 +00:00
adamdunkels
4ce9b8a33b Added -Werror to turn compiler warnings into errors to ensure that code always compile without warnings 2007-11-17 10:37:28 +00:00
adamdunkels
2132462716 Updated to use the watchdog API 2007-11-17 10:28:04 +00:00
adamdunkels
19b7bd9217 Fixed watchdog support for the MSP430. It now works as intended 2007-11-17 10:16:48 +00:00
adamdunkels
22cb35e9f6 Added -Werror to turn compiler warnings into errors to ensure that code always compile without warnings 2007-11-17 10:11:58 +00:00
fros4943
53ea3cd7bf removed symbols from .elf output (but always included with .out)
+ uncommented unused %.ce target (check Makefile.include to enable it)
2007-11-16 09:19:22 +00:00
adamdunkels
f192211444 Added a hack function called clock_counter() to make the current prototype profiling code run on the MSP430 platform 2007-11-12 21:07:39 +00:00
adamdunkels
585f00a804 Removed old codeprop-tmp.c 2007-11-06 20:35:42 +00:00
fros4943
deeed3389a added dummy RTIMER definition 2007-11-01 16:26:58 +00:00
fros4943
559e3eb6ea removed platform specific definitions
+
changed default linker to gcc (as for the default linker arguments)
2007-11-01 16:26:31 +00:00
joxe
7fe87db86a fixed some timer interrupt bugs and reimplemented clock_fine to avoid disabling interrupts 2007-10-04 20:45:29 +00:00
fros4943
5f63995265 support for delayed interrupts
earlier TACCR1 could be set to already passed time if timer A interrupts was delayed
2007-10-04 14:14:58 +00:00
matsutsuka
0ab5a22a47 Fixed a minor glitch 2007-10-01 23:04:02 +00:00
matsutsuka
4d6d5eb8ff RS232 support has been unified from just 'dumb' serial line and SLIP support. 2007-09-29 03:58:38 +00:00
matsutsuka
f553789fea Made unnecessary symbols static. 2007-09-29 03:57:39 +00:00
matsutsuka
1e6ac84151 Customized crt0 has been introduced to fix some SDCC glitches. 2007-09-29 03:57:07 +00:00
matsutsuka
8d5e863b9a File names are changed. 2007-09-19 12:48:26 +00:00
matsutsuka
c99b7dc827 status has been added for polling function. 2007-09-19 12:47:19 +00:00
matsutsuka
eb39a24ad8 Char bug seems to be fixed in the newer version of sdcc. 2007-09-19 12:44:01 +00:00
matsutsuka
7b402d38f8 The suffix for preprocessed assembler file has been changed from ".hS" to ".cS" 2007-09-19 12:41:33 +00:00
nvt-se
1d4db3e2cc The function was missing the case when the stack was used completely,
and didn't return a value then.
2007-09-14 20:21:01 +00:00
matsutsuka
c258a2e83a library extension has been modified form .o to .a 2007-09-11 12:11:38 +00:00
matsutsuka
cce43c2efc Baud-rate has been added to the architecture-depend initialization.
Enabled packaged buffer reading.
2007-09-11 12:03:20 +00:00
matsutsuka
cd971ff8cc sdcc-custom-rule has been added to makefile.z80 2007-09-10 15:09:28 +00:00
matsutsuka
fe980b4445 Comment and include files are slightly changed for readablility. 2007-09-09 13:41:50 +00:00
matsutsuka
259c5a00b9 Some gliches and filenames are changed regarding RS-232C driver. 2007-09-09 13:41:15 +00:00
matsutsuka
c58e4f94b8 Screen-bsae logging implementation. 2007-09-09 12:23:03 +00:00
matsutsuka
17da4a73be Not signal but polling-based rs-232c process. 2007-09-09 12:22:34 +00:00
matsutsuka
91a57c89ba VRAM based default implementation of libconio_arch. 2007-09-09 12:21:54 +00:00
matsutsuka
f9a01d6282 strcasecmp is moved to lib directory 2007-09-09 12:20:59 +00:00