Commit Graph

5226 Commits

Author SHA1 Message Date
nifi
cc55197d52 Updated to use the platform 'jcreate' 2010-05-03 22:02:59 +00:00
nifi
ed472717f2 Added Sentilla Jcreate platform. This platform is similar to the Sky platform but with other sensors and 8 leds. 2010-05-03 21:57:35 +00:00
nvt-se
f690294842 Example has been replaced by udp-ipv6 2010-05-03 14:57:59 +00:00
nvt-se
35282593c0 Updated the test information messages. 2010-05-03 14:56:13 +00:00
nvt-se
c50e4ab4f3 Switched to examples/udp-ipv6 as the code for the test 2010-05-03 14:48:47 +00:00
joxe
7d235841b3 always include the RPL route state to allow compilation of rpl code 2010-05-03 14:12:03 +00:00
nifi
7cebc4ed99 added missing include 2010-05-03 13:55:26 +00:00
nifi
bf198ec695 Moved sensors setup to contiki-sky-platform.c and common make rules to Makefile.common for easier reuse in similar platforms 2010-05-03 13:51:11 +00:00
nifi
6c86398778 Added check to not copy or create too large packets 2010-05-02 14:59:11 +00:00
nifi
a04372adc4 Fixed conversion of packetbuf address type to address index and corrected return value 2010-05-02 12:21:34 +00:00
fros4943
be5656ec2e set cooja mote random seed depending on simulation random seed 2010-05-02 09:42:52 +00:00
fros4943
79aa299531 fixed random seed for cooja motes 2010-05-02 09:42:15 +00:00
joxe
aa980e3f67 removed initialization of RPL from platform main 2010-05-01 13:07:31 +00:00
joxe
f72bd5572c added initialization of RPL 2010-05-01 13:04:31 +00:00
joxe
3c9256c39f removed RPL routing state struct from platform config file 2010-05-01 12:04:13 +00:00
joxe
0531d9bd82 moved RPL routing state struct into uip-ds6 2010-05-01 12:02:25 +00:00
nvt-se
9a4a9b9437 Removed return value in function that should not return a value. 2010-04-30 23:13:58 +00:00
nvt-se
ecada2d1ac *** empty log message *** 2010-04-30 23:10:45 +00:00
nvt-se
2fd414b22f Support fragmentation testing. 2010-04-30 22:20:41 +00:00
nvt-se
b8a3a4109e Adjusted the code so as to remove compilation warnings. 2010-04-30 22:18:12 +00:00
nvt-se
528614e89f Converted the test to examples/udp-ipv6 2010-04-30 22:16:51 +00:00
nvt-se
15f84a93fa Converted the test to use examples/udp-ipv6 2010-04-30 16:20:42 +00:00
nvt-se
66d99e00ec Removed obsolete test for the rimeroute module 2010-04-30 16:04:23 +00:00
nvt-se
d751238747 Added an example of using UDP over an RPL-enabled IPv6 network 2010-04-30 15:52:48 +00:00
nvt-se
d529132002 Added missing parts of the RPL configuration 2010-04-30 15:06:00 +00:00
nvt-se
b822dbb25e Addressed compilation warnings. 2010-04-30 15:04:47 +00:00
nvt-se
4106f4d798 Increased minimum DIO interval from 1024 ms to 4096 ms in order to more calm in duty-cycled networks. 2010-04-30 15:03:55 +00:00
joxe
b0640af3a2 added rpl support for tmote sky - enabled by default 2010-04-30 13:52:14 +00:00
joxe
168a65d989 added ContikiRPL - an implementation of IETF ROLL RPL 2010-04-30 13:43:53 +00:00
joxe
167b0d636e added icmp_send function and moved rpl input function signature 2010-04-30 13:22:21 +00:00
joxe
dc1a5f70ff added uip-debug utilities 2010-04-30 13:20:57 +00:00
nvt-se
7e0e2fe284 Removed obsolete rime-route code for IPv6 2010-04-30 12:43:37 +00:00
nvt-se
a6da1c97df removed obsolete IPv6 routing reference 2010-04-30 12:42:00 +00:00
joxe
cc9914a4f3 fixed uip to use UDP_BUF instead of TCP_BUF when setting udp ports - minor cleanup 2010-04-30 08:46:27 +00:00
adamdunkels
3d10dedecf Added a safety measure against a problem where a node in rare situations would turn itself into a sink. Not entirely sure why this happens, but the safety measure should at least avoid the results of the problem. Added more debug messages. 2010-04-30 07:33:51 +00:00
adamdunkels
0859d4b95f Avoid turning off the radio in the middle of a packet reception 2010-04-30 07:32:39 +00:00
adamdunkels
e606c674c2 Rewrote LPP so that it uses 802.15.4 headers. A number of bugfixes with respect to alignment. Avoid turning off the radio in the middle of packet reception. 2010-04-30 07:31:44 +00:00
adamdunkels
55b6129bd2 Debug printout fix 2010-04-30 07:29:31 +00:00
adamdunkels
e523c36cdf Removed the (unused) header packet of the queuebuf. Added a function for accessing address attributes in the queuebuf 2010-04-30 07:29:08 +00:00
adamdunkels
3c735fcea4 Added a packetbuf flag that indicates if the link layer acks should be used or not 2010-04-30 07:25:51 +00:00
adamdunkels
798f1c63bd Make it possible to receive multicast UDP packets 2010-04-30 07:19:33 +00:00
adamdunkels
a1f69138d1 Avoid adding elements twice 2010-04-30 07:18:24 +00:00
adamdunkels
e53b93384a Print out rdc instead of mac 2010-04-30 07:17:50 +00:00
adamdunkels
bac84c314c Don't include sniffer code when using IPv6 - this saves significant code space because Rime won't be pulled in 2010-04-30 07:17:21 +00:00
fros4943
dc25860caa added option for mote-specific background coloring in log listener 2010-04-28 09:39:26 +00:00
fros4943
18e5718c97 avoid freeing queuebuf multiple times, and free buffer after cancelling connection 2010-04-27 13:08:55 +00:00
fros4943
12b6f35ce7 PRINTF()ed debugging output 2010-04-27 12:56:35 +00:00
fros4943
f4976f8800 test info minor fix 2010-04-27 07:15:33 +00:00
nifi
85d6f6c514 removed unused variable 2010-04-26 22:41:50 +00:00
nifi
875ad7ffda Fixed to not change the header if the header allocation fails 2010-04-26 22:05:40 +00:00