George Oikonomou
6611acadc7
Don't fire-up SERIAL automatically
2015-05-15 09:21:02 +01:00
George Oikonomou
34be012661
Improve I2C power-cycling logic:
...
We only power, clock and enable the peripepheral when / if we need it
* We no longer automatically turn on the SERIAL PD when the CM3 is running
* Make sure the I2C peripheral is accessible (powered and clocked) before any operation
* If the peripheral is not accessible, automatically power it up and run the clock
* Put SDA, SCL, SDA HP and SCL HP in a low-leakage state when shutting down
* Don't automatically fire up the I2C controller when we wake up
2015-05-15 09:21:02 +01:00
George Oikonomou
0ad4b5f323
Add the ability to put the I2C in a known/default state
2015-05-15 09:21:01 +01:00
George Oikonomou
d1a1c16bd0
Define pins for more sensortag peripherals
2015-05-15 09:21:01 +01:00
George Oikonomou
4378217462
Improve sensortag external flash power management:
...
* Explicitly put in deep sleep on device startup
* Verify that the flash has actually dropped to deep sleep
* Update CLK pin to match the one used on the v1.2 sensortag
Obsoletes and Closes #988
2015-05-15 09:21:01 +01:00
George Oikonomou
cf99160706
Change lpm_shutdown() API call:
...
So that the caller can specify pin pull and wakeup state
2015-05-15 09:21:01 +01:00
George Oikonomou
5644e95fb6
Fix global interrupt manipulation
2015-05-15 09:21:00 +01:00
George Oikonomou
3f310e462f
Tidy-up clock configuration
2015-05-15 09:20:59 +01:00
George Oikonomou
450550a7d1
Explicitly configure Srf pins for unused peripherals
2015-05-15 09:20:59 +01:00
George Oikonomou
7a189d010b
Don't power on SERIAL in the Srf's board_init
2015-05-15 09:20:59 +01:00
George Oikonomou
00a6c31158
Improve OPT sensor driver and usage
...
* Query the sensor about its state, rather than using variables in the driver
* Correctly put the sensor to deep sleep
* Fix doxygen comments
* Don't turn off the sensor in examples since it is no longer needed
2015-05-15 09:20:59 +01:00
George Oikonomou
3ab1b836c4
Configure button pins with hysterisis
2015-05-15 09:20:58 +01:00
George Oikonomou
7641aa89f2
Tidy-up macro semicol usage
2015-05-15 09:20:58 +01:00
George Oikonomou
0b6813513c
Undefine CTS/RTS pins for the SmartRF
2015-05-15 09:20:58 +01:00
George Oikonomou
883c30b4ac
Handle the configuration of the TMP_RDY pin
2015-05-15 09:20:58 +01:00
George Oikonomou
cee6c190c5
Use the BMP in 'forced' mode and reduce startup delay
...
In forced mode, the BMP will turn itself off after a reading
2015-05-15 09:20:57 +01:00
Antonio Lignan
b50ae639b3
Merge pull request #986 from g-oikonomou/cc26xx-hdc-sensor
...
Replace STH21 with HDC1000 for the CC2650 SensorTag
2015-05-15 10:12:08 +02:00
Brad Campbell
6eaada0c3f
Delete old CoAP implementation
...
It seems that this implementation of CoAP in Contiki is no longer
maintained in favor of the `er-coap` implementation. This commit
removes the code to prevent confusion and further bit-rot.
2015-05-14 17:20:46 -04:00
Benoît Thébaudeau
c9324d133f
Merge pull request #1060 from g-oikonomou/cc26xx/contrib/ihex
...
Produce ihex files usable with TI's Flash Programmer
2015-05-14 19:24:36 +02:00
Benoît Thébaudeau
d64927397f
Merge pull request #968 from g-oikonomou/cc2538-contrib-on-chip-sensors
...
Move CC2538 VDD/3 and On-Chip Temp sensors to the CPU dir
2015-05-14 19:21:56 +02:00
Benoît Thébaudeau
71f22b1775
Merge pull request #966 from g-oikonomou/cc2538-startup-to-cpu-dir
...
Move cc2538 startup-gcc.c to the CPU dir
2015-05-14 18:43:39 +02:00
George Oikonomou
69c4f19336
Produce ihex files usable with TI's Flash Programmer
2015-05-14 13:22:11 +01:00
George Oikonomou
6507112b33
Remove SHT21 sources
2015-05-14 13:20:40 +01:00
George Oikonomou
d5f458509d
Adjust the CC26xx README to reflect new sensors
2015-05-14 13:20:39 +01:00
George Oikonomou
1384030d6e
Replace SHT21 with HDC1000 driver in the tag build
2015-05-14 13:20:39 +01:00
George Oikonomou
7e3b8d6fcc
Add a driver for the HDC1000 sensor
2015-05-14 13:20:39 +01:00
George Oikonomou
a32598f658
Merge pull request #1059 from g-oikonomou/cc26xx/contrib/xxware-instructions
...
Update CC26xxware download instructions
2015-05-13 12:21:48 +01:00
George Oikonomou
96e1647270
Move cc2538 startup-gcc.c to the CPU dir
2015-05-13 01:31:10 +01:00
George Oikonomou
4de471478a
Link and build tmp, vdd and als sensors
2015-05-12 23:42:20 +01:00
George Oikonomou
12ac8e1fb5
Initialise ADC in main, not in sensor drivers
2015-05-12 23:42:20 +01:00
George Oikonomou
3717522680
Re-work the CC2538 driver to be a driver for the Srf06 ALS only
2015-05-12 23:42:19 +01:00
Nicolas Tsiftes
44af0fa66b
Merge pull request #1003 from adamdunkels/pr/http-socket-dns64-tcp-socket
...
New HTTP socket, DNS64, IP64 Cooja tests
2015-05-10 17:14:31 +02:00
George Oikonomou
351b16c43c
Update CC26xxware download instructions
2015-05-10 14:53:05 +01:00
Adam Dunkels
64bae5b38d
Include the ip64-addr module, to make http-socket compile
2015-05-10 10:51:12 +02:00
Adam Dunkels
4a85d49a09
Include a subplatform-conf.h, which may override configuration parameters set by the cooja/contiki-conf.h
2015-05-10 10:51:12 +02:00
Adam Dunkels
81391c11a7
Need to specify the target name, which allows us to have platforms that inherit from the cooja platform, like the cooja-ip64 platform
2015-05-10 10:51:12 +02:00
Adam Dunkels
bab1c48912
New Cooja platform designed for runnig IP64 routers for automated testing
2015-05-10 10:51:11 +02:00
George Oikonomou
447be526ae
Merge pull request #1046 from g-oikonomou/cc26xx/contrib/slip-and-br
...
Enable slip-radio and rpl-border-router for CC26xx
2015-05-09 22:51:06 +01:00
George Oikonomou
598fd770b8
Merge pull request #960 from g-oikonomou/travis-arm-aapcs-tests
...
Test cc2538dk with the recommended toolchain
2015-05-09 22:31:18 +01:00
George Oikonomou
bd5e35c968
Merge pull request #1052 from simonduq/packetbuf-cleanup
...
Packetbuf cleanup
2015-05-09 22:30:21 +01:00
Simon Duquennoy
bb76bb8beb
Remove unused flag SICSLOWPAN_CONF_ACK_ALL. Include packetbuf attribute PACKETBUF_ATTR_RELIABLE only when RIME is compiled.
2015-05-06 16:34:26 +02:00
George Oikonomou
d808978149
Improve platform README
2015-05-03 22:36:04 +01:00
George Oikonomou
0327eea109
Printf Driverlib version at startup
2015-05-03 22:36:04 +01:00
George Oikonomou
77874dc02b
Remove unused configuration defines
2015-05-03 22:36:03 +01:00
George Oikonomou
f83c4e7286
Improve code style
2015-05-03 22:36:03 +01:00
George Oikonomou
1d97e7e11e
Improve Reed Relay macro and comments for clarity
2015-05-03 22:36:03 +01:00
George Oikonomou
8c55bc3f3d
Remove obsolete/unused make variables
2015-05-03 22:36:03 +01:00
George Oikonomou
a72d90e283
Control TCP MSS in the project's conf
2015-05-03 13:31:03 +01:00
George Oikonomou
364fc9cacf
Define button_sensor in contiki-conf.h
2015-05-03 13:30:59 +01:00
Oliver Schmidt
05d98ffca3
Adjusted some Win32 config values.
2015-05-02 00:17:53 +02:00
Oliver Schmidt
9aee07c9ad
Leverage the recently added exec() cmdline support in the cc65 C library for the Apple ][.
2015-04-26 21:45:33 +02:00
Oliver Schmidt
a824722862
Merge remote-tracking branch 'upstream/master'
2015-04-26 14:35:40 +02:00
Nicolas Tsiftes
8f50d9709d
Merge pull request #999 from adamdunkels/lebrush-rdnss-support-rebased
...
RDNSS support, again
2015-03-30 17:21:23 +02:00
George Oikonomou
7238a1628f
Merge pull request #1004 from alignan/z1-reed-sensor
...
Added Reed Sensor driver, example, and minor fix to the SHT25 sensor driver
2015-03-30 15:05:05 +01:00
Antonio Lignan
b9334a3b0e
Added Reed Sensor driver and example
2015-03-30 10:30:09 +02:00
Gaëtan Harter
d0232bb20d
Remove unused UIP_CONF_ND6_ defines in platforms
...
UIP_CONF_ND6_MAX_PREFIXE
UIP_CONF_ND6_MAX_DEFROUTERS
2015-03-24 13:09:29 +01:00
Gaëtan Harter
697d8c0d23
Remove siclowpan compressions define in platforms
...
Several platforms defined compressions modes values:
SICSLOWPAN_CONF_COMPRESSION_IPV6
SICSLOWPAN_CONF_COMPRESSION_HC1
SICSLOWPAN_CONF_COMPRESSION_HC01
instead of using the global SICSLOWPAN_COMPRESSION_LEVEL definitions
2015-03-24 11:40:32 +01:00
Gaëtan Harter
60719b8239
Remove unused SICSLOWPAN_CONF_CONVENTIONAL_MAC
2015-03-24 11:18:25 +01:00
Antonio Lignan
64fd000e5d
Removed duplicated condition in sht25 configuration
2015-03-11 14:25:23 +01:00
Antonio Lignan
1af29a5beb
Added SHT25 sensor
2015-03-10 15:33:58 +01:00
George Oikonomou
cd219e206c
Adjust the cc2538dk readme to reflect travis test changes
2015-03-02 08:41:53 +00:00
George Oikonomou
0ba7f8df52
Merge pull request #951 from hrzr/master
...
Make the CC2538DK button sensor clearer to work with
2015-02-28 15:14:53 +00:00
Jonas Olsson
c9071b6952
Add CC26xx common platform files
2015-02-25 13:12:20 +01:00
Jonas Olsson
b385933fa8
Add SensorTag CC2650 files
2015-02-25 13:11:09 +01:00
Jonas Olsson
c7d85c3ea5
Add Srf06EB + CC26xx EM files
2015-02-25 13:10:26 +01:00
Oliver Schmidt
da536cb07c
Removed superfluous AppleCommander parameters.
2015-02-21 17:16:08 +01:00
Mikhail Gaivoronskii
3f2869824c
Uncrustified platform/cc2538dk/dev/button-sensor.c
2015-02-20 21:53:33 +05:00
Nicolas Tsiftes
e58aae1dcd
Merge pull request #950 from patoman007/master
...
Fix: Misconfigurations to compile for avr-zigbit platform
2015-02-17 09:41:20 +01:00
George Oikonomou
6bd8bb05f6
Improve wording
2015-02-16 10:17:58 +01:00
George Oikonomou
72914369e8
Re-structure CC2538 doxygen module hierarchy
2015-02-16 10:17:58 +01:00
George Oikonomou
8751e55c94
Improve wording, fix warnigs in the SSI/SPI docs
2015-02-16 10:17:58 +01:00
George Oikonomou
b6bd556805
Fix clock.h warnings caused by multiple, conflicting documentation blocks of clock functions
2015-02-15 21:48:30 +01:00
George Oikonomou
fb22e15844
Fix warnings caused by incorrect param names / undocumented params
2015-02-15 20:11:08 +01:00
Nicolas Tsiftes
277dc8e174
Merge pull request #826 from alignan/fix_octal
...
Remove leading zeros from node id
2015-02-11 22:35:02 +01:00
Thomas Weber
f06bd06b79
corrected line - #if UIP_CONF_IPV6 - in contiki-rcb-main.c to - #if NETSTACK_CONF_WITH_IPV6 -
2015-02-02 22:08:35 +01:00
PAtO!
2c2b930648
Fix: Misconfigurations to compile for avr-zigbit platform
2015-01-29 14:31:47 -03:00
Thomas Weber
d575f1a6ce
added missing modules in Makefile.avr-rcb, added netstack init functions (to start the at86rf230, modified macros to increase the buffersize)
2015-01-17 19:19:16 +01:00
Víctor Ariño
ccc0d27da0
Integrates uip-nameserver API
...
On the same commit the src have been uncrustified and some typo
fixes as well as includes missing.
2015-01-09 09:44:06 +01:00
George Oikonomou
8fe5456588
Change default PAN ID for the CC2538DK platform to 0xABCD
2014-12-08 22:33:33 +00:00
George Oikonomou
73a133373a
Change CC2530DK default PAN ID to 0xABCD and make it configurable by project-conf.h
2014-12-08 22:33:11 +00:00
Simon Duquennoy
c2ca3e9fdb
Cleanup UIP_CONF_IPV6_RPL configuration
2014-12-02 12:38:55 +01:00
Simon Duquennoy
6891bcdd20
Remove unneeded module inclusion from avr and seedeye platforms
2014-12-01 21:06:01 +01:00
Simon Duquennoy
0d9815e08b
WITH_UIP6 -> NETSTACK_CONF_WITH_IPV6
2014-12-01 21:04:54 +01:00
Simon Duquennoy
a9cc909794
Network layer configuration: replace UIP_CONF_* with NETSTACK_CONF_WITH_*
2014-12-01 21:02:57 +01:00
Simon Duquennoy
229c53a2e6
Cooja platform: do not include the rime module by default
2014-12-01 20:13:10 +01:00
Simon Duquennoy
e85f41ffa0
Get IPv6 to fit in micaz platform again
2014-12-01 20:13:09 +01:00
Simon Duquennoy
722b3258d1
Cleanup of the Contiki network layer configuration. Now using CONTIKI_WITH_IPV6, CONTIKI_WITH_IPV4, and CONTIKI_WITH_RIME in makefiles, and UIP_CONF_IPV6, UIP_CONF_IPV4, UIP_CONF_RIME in c code. Now only the stacks that are used are compiled (via makefile MODULES). Make IPv6 the default network stack.
2014-12-01 20:13:09 +01:00
Nicolas Tsiftes
d820feadd6
Merge pull request #792 from wchyan/master
...
atmega128rfa1: Fix the default build error
2014-11-28 19:23:26 +01:00
Nicolas Tsiftes
69c76c9f2f
Merge pull request #872 from Bocci83/master
...
Seedeye platform: add the explicit list of modules
2014-11-28 19:21:52 +01:00
Nicolas Tsiftes
9b90c378e8
Merge pull request #812 from kkrentz/packetbuf-holds-broadcast
...
packetbuf_holds_broadcast()
2014-11-28 19:15:19 +01:00
kkrentz
7b63217a32
ContikiMAC: Default to contikimac_framer when using Rime over ContikiMAC
2014-11-25 04:56:09 -08:00
Stefano
a5550fa083
Seedeye platform: add the explicit list of modules
2014-11-21 14:36:23 +01:00
Antonio Lignan
e8c49dd29e
Remove leading zeros from node id
2014-11-20 14:48:28 +01:00
Nicolas Tsiftes
866bb99944
Merge pull request #860 from simonduq/frame802154-align
...
frame802154_t: make sure dest_addr and src_addr are aligned
2014-11-18 08:59:30 +01:00
kkrentz
fb00a217f5
packetbuf: Use packetbuf_holds_broadcast() all-over
2014-11-13 09:58:08 -08:00
Enrico Joerns
b0206e2f58
[doc] avr-raven: Fix placement of description for ravenserial group
...
Note: The raven-lcd-interface and raven-ipso modules in atmega128rfa1
seem to be needles for this platform and might be there only because of
copy&paste from the raven platform. Should be removed in a later patch.
2014-11-10 23:53:34 +01:00
Enrico Joerns
846fd567d4
[doc] avr-atmega128rfa1: add to parent platform group
2014-11-10 23:53:34 +01:00
Enrico Joerns
d4cf5ef5a1
[doc] Added minimal doxygen anchor for each platform currently available in Contiki
...
Already existing label names and titles were retained
2014-11-10 23:53:34 +01:00
Enrico Joerns
0288f867ce
[platform/native] Add to doxygen tree
2014-11-10 23:53:32 +01:00
Enrico Joerns
9dd7f1d29a
[doc] added faulty esb and msp430 references
2014-11-10 23:53:32 +01:00