Update README.md
This commit is contained in:
parent
81b23beade
commit
0624c6b230
32
README.md
32
README.md
|
@ -11,28 +11,28 @@ You can of course use a super cheap linear regular like an LM317 to do the same
|
|||
A stock C.H.I.P is all you need, I could not get the emulator to run in headless mode, so you will need the standard firmware and then configure the emulator to auto run in the KDE desktop.
|
||||
|
||||
# Tools Required
|
||||
-Soldering Iron
|
||||
-Edge cutters (To cut off excess pins after soldering)
|
||||
-Good 60/40 Solder
|
||||
-22 Guage or similar stranded hook up wire
|
||||
- Soldering Iron
|
||||
- Edge cutters (To cut off excess pins after soldering)
|
||||
- Good 60/40 Solder
|
||||
- 22 Guage or similar stranded hook up wire
|
||||
|
||||
# Electrical Components Required
|
||||
If you are building it the exact same way I did, including the PCB this is what you will need
|
||||
-4x JS 2.0 PH Connectors Male & Female (For 12V In, 12V Out, Speaker Out, and Power Switch)
|
||||
-2x 40 Pin DIP headers
|
||||
-1x 4 pin 12v to 5v buck converter (Search EBay)
|
||||
-1x Small speaker (Digikey SP-1504 is what I used)
|
||||
-1x Lumineer 1300mAh 12V battery
|
||||
-1x Set of XT60 Drone battery connectors
|
||||
-1x 3S LiPo battery charger (Optional, but I'm sure you will want to charge the battery at some point)
|
||||
-1x 3.5" TFT LCD TV from Adafruit (https://www.adafruit.com/products/913)
|
||||
-1x Pushbutton toggle switch for power (https://www.adafruit.com/product/1683)
|
||||
- 4x JS 2.0 PH Connectors Male & Female (For 12V In, 12V Out, Speaker Out, and Power Switch)
|
||||
- 2x 40 Pin DIP headers
|
||||
- 1x 4 pin 12v to 5v buck converter (Search EBay)
|
||||
- 1x Small speaker (Digikey SP-1504 is what I used)
|
||||
- 1x Lumineer 1300mAh 12V battery
|
||||
- 1x Set of XT60 Drone battery connectors
|
||||
- 1x 3S LiPo battery charger (Optional, but I'm sure you will want to charge the battery at some point)
|
||||
- 1x 3.5" TFT LCD TV from Adafruit (https://www.adafruit.com/products/913)
|
||||
- 1x Pushbutton toggle switch for power (https://www.adafruit.com/product/1683)
|
||||
|
||||
# 3D Prints
|
||||
I used the excellent 3D models from Thingiverse of a user named option8 and printed them on my Zortrax M200 pinter at 0.19mm/Medium infill. The original models are meant for a Raspberry Pi powered via USB, so I modified the base a bit for this self contained model.
|
||||
-Apple II Enclosure (https://www.thingiverse.com/thing:340677)
|
||||
-Apple II Monitor (http://www.thingiverse.com/thing:377253)
|
||||
-Apple II Enclosed Base (http://www.thingiverse.com/thing:2103158)
|
||||
- Apple II Enclosure (https://www.thingiverse.com/thing:340677)
|
||||
- Apple II Monitor (http://www.thingiverse.com/thing:377253)
|
||||
- Apple II Enclosed Base (http://www.thingiverse.com/thing:2103158)
|
||||
I drilled a hole through the top of the enclosure into the monitor to run the wires for the monitor power, power switch, and video signals into the monitor.
|
||||
Standard super glue seemed to work fine for gluing everything together.
|
||||
|
||||
|
|
Loading…
Reference in New Issue