Renamed this video mode to: "Color (RGB Monitor)"
Also renamed "Color (Monitor)" to "Color (NTSC Monitor)".
As for the colours: I've changed them from the original 1.25 colours. Instead I runtime-generate the colours from the NTSC code. See NTSC.cpp's GenerateBaseColors(). This shifts the same 4-bit pattern in, combining with NTSC color phase, until the colour stabilises. Then I average the next 4 RGB values to get the final colour. The reason for this is that we now have consistent colours between NTSC and this simplified rendering mode.
NB. The 2 greys (in GR,DGR,DHGR) are now the same RGB value.
Added new cmd-line switch: -videorom <file> to replace the video ROM for the Enhanced //e.
- Support video ROM sizes of 4K, 8K and 16K (top 8K only).
- NB. The rocker switch is set to European video ROM.
F10 (for //e or Enhanced //e models) emulates the PAL //e's rocker switch (under the keyboard) to toggle between European or US video ROM.
Other:
- Fixed debugger's view of the AltCharSet soft-switch (it was showing the opposite state).
* Refactor Language Card:
. MemSetPaging() now not used for $C080-C08F accesses.
- Instead LC registers its own I/O handler like all other slot 1-7 cards.
. Saturn uses base LC's 16K for bank0
* Move all 'modechanging = 0' to UpdatePaging()
Added support for #590:
* Changed Apple II original to default to no LC
* Added new cmd-line switch: -s0 <languagecard|lc>
* Changed so when LC is in slot-0, it now use Apple II+'s F8 (auto-start) ROM
Support for #408:
* added slot-0 LC and Saturn 128K for Apple II and II+
* added save-state support
- for slot-0 LC/Saturn, save the LC state in the slot-0 card, not the //e MMU; and switch to a new Apple2 unit ver2
* added g_Slot0, g_SlotAux
* added new LanguageCard.cpp/h to project and moved Saturn code into these new files.
* updated VS2013,2015,2017 projects
Support partial reads for sequential accesses of 6 or less cycles.
- And 31 or less cycles when in "Disk Access Speed" = "Authentic Speed"
Save-state support for partial read cycle (Disk][ unit v3)
Added boot-time logging for Phasor1.dsk (ProDOS 1.1.1)
. For the 14M video modes (DHGR,DGR,80COL), start rendering 1x 14M pixel early to account for these video modes being shifted right by 1 pixel
. Revert the display width back to 560 by disabling EXTEND_14M_VIDEO_BY_1_PIXEL
. reverted default so that ALT+TAB is not hooked (#556)
. reverted default so that ALT GR's fake LCONTROL is not hooked (#558)
. added new switches: -hook-alt-tab and -hook-altgr-control to support hooking these key combo's (#556)
. When Alt Gr is pressed, then manually post WM_CHAR message on receiving a WM_KEYDOWN (manually translate and account for shift/control/caps-lock)
. Hook filter: suppress Alt Gr's (ie. RMENU's) fake LCONTROL messages
Also:
. Hook filter: allow Ctrl+Shift+Esc (for Task Manager)
. Keyboard: refactor only use accessor functions to get the Alt/Control/Shift state
. Created a dedicated thread with message loop (#570)
HookFilter dll: Only call GetKeyState() if keycode is ESC (instead of every time)
DebuggerCursorUpdate(): reduce sleep from 10ms to 1ms
. When in MODE_LOGO, don't pass WM_CHAR to Apple II keyboard (now consistent with WM_KEYDOWN)
. Small refactor for Apple II keyboard's WM_KEYDOWN handler
Move code for log init & done to Log.cpp
Changed HGR rendering, such that that last video byte (at hpos=64) clears g_nLastColumnPixelNTSC so that the end-of-line off-screen pixel is zero (see #555).
. Fix for GetKeyState() not detecting the special keys as being up (so AKD was erroneously reporting the key still down).
. eg. Whilst pressing TAB, press LEFT ALT, then release TAB.
. Also suppress ALT+SPACE
. PostMessage to AppleWin message-pump for WM_KEYDOWN, WM_KEYUP for these special key combos
. Add special any-key-down (AKD) handling for these special key combos
. Start video rendering from screen position -1 (ie. 1 DHGR pixel offscreen)
. Allows 559th DHGR vertical column to be visible
. But now an HGR HCOLOR=2 vertical line at column 0 is only 1 DHGR pixel wide
Also:
. Fix TEXT80 to be aligned with DHGR
. Fix FLASH in TEXT80 (inverse aux bits needed to be masked with 0x7f)
. DCD state is now a mirror of DSR unless -dcd switch is used. (Fixes#553)
. Removed -dsr,-dtr switches, so -modem is now an alias for -dcd. (Also for #553)
. Wait for events (RLSD,DSR,CTS) in CommThread and call GetCommModemStatus() in CommThread.
. SSC: For TCP mode, support DSR, DCD & CTS status bits (#308).
. SSC: Now DTR must also be set to enable interrupts (in addition to the respective Tx/Rx interrupt bit).
. SSC: When reading the Status register, throttle calls to GetCommModemStatus() to a maximum of once every 8ms.
. Support TX IRQ for both TCP and COM modes (fixes#522)
. Support CTS/RTS (fixes#311)
. Fixed reading DIPSW registers
. Fixed TCP mode which was only generating an IRQ for first byte received
. Added UpdateCommandReg() to consolidate all updates to SSC command reg
. Updated reference URLs
So added a 2nd "Pure CPU MHz" for full-speed (ie. no video update), eg:
---------------------------
Benchmarks
---------------------------
Pure Video FPS: 2860 hires, 2868 text
Pure CPU MHz: 10.3 (video update)
Pure CPU MHz: 241.3 (full-speed)
EXPECTED AVERAGE VIDEO GAME
PERFORMANCE: 476 FPS
(ref: #424, #540)
Changed struct Disk_t:
. Added new struct Drive_t with "has-a" relationship to Disk_t
. Split properties of drive into Drive_t and properties of disk into Disk_t
* Fix the following errors reported by VS2017 Code Analysis.
applewin\source\applewin.cpp(761): warning C6385: Reading invalid data from '"Disk Image"': the readable size is '11' bytes, but '21' bytes may be read.
applewin\source\debugger\debug.cpp(6624): warning C6386: Buffer overrun while writing to 'sName': the writable size is '31' bytes, but '32' bytes might be written.
applewin\source\debugger\debugger_display.cpp(3715): warning C6053: The prior call to 'strncpy' might not zero-terminate string 'sText'.
applewin\source\log.cpp(42): warning C6053: The prior call to '_vsnprintf' might not zero-terminate string 'output'.
applewin\source\debugger\debug.cpp(2759): warning C6011: Dereferencing NULL pointer 'pFont'.
applewin\source\debugger\debugger_symbols.cpp(243): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'pText'.
applewin\source\diskimagehelper.cpp(1132): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'pszExt'.
applewin\source\diskimagehelper.cpp(1141): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'szFilename'.
applewin\source\parallelprinter.cpp(242): warning C6053: The prior call to '_tcsncpy' might not zero-terminate string 'g_szPrintFilename'.
The one about RegSetValue(), according to Microsoft
https://msdn.microsoft.com/en-us/library/windows/desktop/ms724922(v=vs.85).aspx
the last argument cbData is ignored, so I set it to 0, as in some cases was anyway wrong (see "DiskImage").
Signed-off-by: Andrea Odetti <mariofutire@gmail.com>
* Use sizeof() rather than hardcoded value.
Fix one more case on non terminated string.
Signed-off-by: Andrea Odetti <mariofutire@gmail.com>
Changes to ease code compilation in GCC.
Disk_t and HDD contain a std::string and for this reason they need a proper constructor, ZeroMemory is not guaranteed to work.
