Doug Brown 9333b65cde Fixed a tiny mistake -- forgot to say the name of one of my enums after the typedef. ...

Finished making the electrical test work -- I had failed to realize that I have to ignore the ground shorts once they have been found -- otherwise they reappear against EVERY tested pin (because they are always low and I'm testing for low pins -- duh!). Anyway, it was showing way too many shorts, and that's why. Now I independently can find shorts between separate pins without getting flooded with the ground shorts too. Only thing that's missing is the VCC shorts, but I can't do that without pullups (to my knowledge)

2011-12-18 12:00:22 -08:00

.settings

Optimized some of my routines and fixed a nasty, nasty bug that was causing the board to crash because of multiple things being outputs simultaneously.

2011-12-13 21:56:20 -08:00

LUFA

Added LUFA into the project, right now just for some demo stuff.

2011-12-09 22:11:31 -08:00

tests

Fixed a tiny mistake -- forgot to say the name of one of my enums after the typedef.

2011-12-18 12:00:22 -08:00

usb_serial

Fixed a tiny mistake -- forgot to say the name of one of my enums after the typedef.

2011-12-18 12:00:22 -08:00

.cproject

Started writing more command handling

2011-12-11 08:35:53 -08:00

.gitignore

Initial import of my test code for the SIMM programmer board. Right now

2011-11-25 23:10:30 -08:00

.project

OK -- so I separated the actual port code from the external memory controller code. I think this makes more sense.

2011-11-27 00:01:29 -08:00

chip_id.h

Started writing more command handling

2011-12-11 08:35:53 -08:00

delay.c

Added delay "adapter" class to keep simm_electrical_test.c completely platform-independent.

2011-12-04 16:30:26 -08:00

delay.h

Added delay "adapter" class to keep simm_electrical_test.c completely platform-independent.

2011-12-04 16:30:26 -08:00

Descriptors.c

Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.

2011-12-11 21:48:26 -08:00

Descriptors.h

Continued playing with USB serial stuff. I think it's working well now, but I'm running into problems reading from the SIMM, so I need to figure out why I'm not getting the data I expect.

2011-12-10 10:35:41 -08:00

external_mem.c

Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.

2011-12-17 11:18:56 -08:00

external_mem.h

Started working on more optimizations, but something weird is happening and it's crashing...not sure why yet.

2011-12-11 21:48:26 -08:00

main.c

Optimized some of my routines and fixed a nasty, nasty bug that was causing the board to crash because of multiple things being outputs simultaneously.

2011-12-13 21:56:20 -08:00

mcp23s17.c

Broke out the SPI read/write into a single routine. Less code repetition -- easier to read and smaller.

2011-12-17 13:43:12 -08:00

mcp23s17.h

OK -- so I separated the actual port code from the external memory controller code. I think this makes more sense.

2011-11-27 00:01:29 -08:00

ports.c

Fixed the ordering of the chips -- I had the bytes reversed. Now, when I write/read a continuous stream of data, the bytes will correspond with the correct chips.

2011-12-17 11:18:56 -08:00

ports.h

OK -- so I separated the actual port code from the external memory controller code. I think this makes more sense.

2011-11-27 00:01:29 -08:00

Description

Firmware for Mac ROM SIMM programmer

35 MiB

Languages

C 97.5%

Makefile 1.8%

Assembly 0.4%

CMake 0.3%