dingusppc/devices/common/pci/bandit.h

147 lines
4.4 KiB
C
Raw Normal View History

/*
DingusPPC - The Experimental PowerPC Macintosh emulator
Copyright (C) 2018-23 divingkatae and maximum
(theweirdo) spatium
(Contact divingkatae#1017 or powermax#2286 on Discord for more info)
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
/** Bandit/Chaos ARBus-to-PCI bridge definitions.
Bandit is a custom ARBus-to-PCI bridge used in the second generation
of the Power Macintosh computer equipped with the PCI bus.
Chaos is a custom ARBus-to-PCI bridge that provides a specialized
PCI-like bus for video called VCI. This 64-bit bus runs at the same
frequency as the CPU bus (40-50 MHz) and connects video input/output
devices with the CPU bus.
Chaos seems to be a Bandit variant without PCI configuration space.
It's assumed to be present in some PCI Power Macintosh models of the
first generation.
*/
#ifndef BANDIT_PCI_H
#define BANDIT_PCI_H
#include <devices/common/hwcomponent.h>
2022-08-06 17:29:45 +00:00
#include <devices/common/mmiodevice.h>
#include <devices/common/pci/pcidevice.h>
#include <devices/common/pci/pcihost.h>
#include <cinttypes>
#include <memory>
#include <string>
#define BANDIT_DEV (11) // Bandit's own device number
2022-01-17 00:28:35 +00:00
#define BANDIT_CAR_TYPE (1 << 0) // Bandit config address type bit
/* Convenient macros for parsing CONFIG_ADDR fields. */
#define BUS_NUM() ((this->config_addr >> 16) & 0xFFU)
#define DEV_NUM() ((this->config_addr >> 11) & 0x1FU)
#define FUN_NUM() ((this->config_addr >> 8) & 0x07U)
#define REG_NUM() ((this->config_addr ) & 0xFCU)
2022-01-17 00:28:35 +00:00
/** Bandit specific configuration registers. */
enum {
2022-12-19 00:28:16 +00:00
BANDIT_ADDR_MASK = 0x48,
BANDIT_MODE_SELECT = 0x50,
BANDIT_ARBUS_RD_HOLD_OFF = 0x58,
};
2022-01-17 00:28:35 +00:00
/** checks if one bit is set at time, return 0 if not */
#define SINGLE_BIT_SET(val) ((val) && !((val) & ((val)-1)))
/*
Common functionality for Bandit/Chaos PCI host bridge.
*/
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
class BanditHost : public PCIHost, public MMIODevice {
public:
// PCIHost methods
virtual void pci_interrupt(uint8_t irq_line_state, PCIBase *dev) {}
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
// MMIODevice methods
uint32_t read(uint32_t rgn_start, uint32_t offset, int size);
void write(uint32_t rgn_start, uint32_t offset, uint32_t value, int size);
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
2023-04-01 14:59:42 +00:00
int device_postinit();
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
protected:
uint32_t config_addr;
Add PCI bridge and multi-function device support. Add PCI bridge and multi-function device support. Overview: - A multi-function device is two or more PCIDevices with the same device number but one device is function zero (as with currently implemented PCIDevices) and the other functions have function numbers between 1 and 7. The device number and function number are properties of the PCIDevice's parent PCIHost connection. - A PCIBridge is a PCIHost (it can connect child PCI devices) and a PCIDevice (it has config space, BARs, and expansion ROM). - A PCIDevice has Type 0 header. It has 6 BARs. - A PCIBridge has Type 1 header. It has 2 BARs. The config space registers beginning from offset 0x18 differ from those of a PCIDevice. Possible future modifications: - Add a PCICardBus class. It is a PCIHost. It has Type 2 header. It has one BAR. The first 20 bytes match Type 0 and Type 1 headers. These exist in New World Macs. They allow hot-plug of PCI devices. - Split base PCI registers (first 16 bytes) into a PCIBase class. Type 1 and 2 have two or one BAR but I think all 6 BARs belong in PCIBase class anyway. - Split PCIHost into two classes: Currently existing PCIHosts (Bandit, Grackle) are PCIHost and PCIRoot (they have the broadcast I/O requests functionality) while PCIBridge is PCIHost only - it can propagate I/O requests but does not originate the broadcast. - pci_register_mmio_region should maybe return a pointer to a region struct so that it can be used for unregistering or modifying the region's range. This may be useful for PCI bridges which have ranges that may constrain memory BARs of their downstream devices. PCIDevice - Moved expansion ROM BAR handling to a separate function pci_wr_exp_rom_bar so that it can be used by both PCI devices and PCI bridges which have the ROM BAR in different locations. It now supports unmapping expansion ROM. Also made exp_rom_bar not writable if there's no ROM. - Added num_bars field which specifies the number of valid BARs since Type 0, 1, and 2 headers have different number of BARs. - map_exp_rom_mem now properly unmaps expansion ROM (using new function unmap_exp_rom_mem) before mapping it again. - Added function set_multi_function which modifies hdr_type to indicate if a device has other functions. This is to be applied only to devices with function number 0. PCIHost - When attaching a PCI device, it will check if it's a multi-function device (there exists an attached function that is not zero) and adjust hdr_type of function 0 of the device accordingly. - Attached PCI bridges are added to a list of PCI bridges attached to the host. - Added pci_io_read_loop and pci_io_write_loop which loop through attached PCI devices to find one that will perform the action for the given I/O address without logging an error (since some other device might perform the action). - Added pci_io_read_broadcast and pci_io_write_broadcast which are used by a PCI root (bandit/grackle). They will log an error if the action is not performed. They should probably do a machine check exception to match real Power Macs. - pci_find_device (used by PCI root) will recursively find a PCIDevice for type 1 config register accesses. - Logging from PCIHost now includes the name of the PCIHost instead of just "PCIHost" because there can be multiple PCI hosts. PCIBridge - Sets num_bars to 2 and hdr_type to 1. - I/O ranges set in the config registers are handled correctly by pci_io_read and pci_io_write. - Memory ranges set in the config registers do not currently affect memory mmio regions. It is assumed that Open Firmware and the OS will set the ranges and BARs correctly to allow all BARs to be accessed fully. bandit, mpc106 - Bandit and Grackle now call pci_io_read_broadcast and pci_io_read_broadcast to pass I/O accesses to downstream PCI devices. - Chaos is modified to work like Bandit even though it will never have PCI bridges attached or devices that support I/O accesses. It's simpler this way.
2022-10-26 06:06:12 +00:00
private:
void cfg_setup(uint32_t offset, int size, int &bus_num, int &dev_num,
int &fun_num, uint8_t &reg_offs, AccessDetails &details,
PCIBase *&device);
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
};
/*
PCI device for Bandit (but not for Chaos).
*/
class BanditPciDevice : public PCIDevice {
public:
BanditPciDevice(int bridge_num, std::string name, int dev_id, int rev);
~BanditPciDevice() = default;
// PCIDevice methods
uint32_t pci_cfg_read(uint32_t reg_offs, AccessDetails &details);
void pci_cfg_write(uint32_t reg_offs, uint32_t value, AccessDetails &details);
protected:
void verbose_address_space();
private:
uint32_t addr_mask;
uint32_t mode_ctrl; // controls various chip modes/features
uint32_t rd_hold_off_cnt;
};
/*
Bandit HLE emulation class.
*/
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
class Bandit : public BanditHost {
public:
2022-12-18 22:40:56 +00:00
Bandit(int bridge_num, std::string name, int dev_id=1, int rev=3);
~Bandit() = default;
static std::unique_ptr<HWComponent> create_first() {
return std::unique_ptr<Bandit>(new Bandit(1, "Bandit-PCI1"));
2022-08-06 17:29:45 +00:00
};
2022-12-18 22:40:56 +00:00
static std::unique_ptr<HWComponent> create_psx_first() {
return std::unique_ptr<Bandit>(new Bandit(1, "PSX-PCI1", 8, 0));
};
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
private:
uint32_t base_addr;
std::unique_ptr<BanditPciDevice> my_pci_device;
};
/**
Chaos HLE emulation class.
2022-08-06 17:29:45 +00:00
*/
Fix PCI config r/w of byte and word and unaligned. dingusppc could not read bytes from offset 1,2,3 or words from offset 2. dingusppc did not read words from offset 1,3 and longs from offset 1,2,3 in the same way as a real Power Mac 8600 or B&W G3. This commit fixes those issues. - Added pci_cfg_rev_read. It takes a 32 bit value from offset 0 and returns a value of the specified size using bytes starting from the specified offset. Offsets 4,5, & 6 wrap around to 0,1, & 2 respectively. The result bytes are in flipped order as required by the read method (so a value of 0x12345678 is returned as 0x78563412) A real Power Mac 8600 might return a random byte for offset 4, 5, 6 for vci0 but usually not for pci1. A B&W G3 seems to always wrap around correctly. We won't read random bytes, and we won't read a default such as 00 or FF. We'll do the wrap around which makes the most sense because writing 0x12345678 to any offset and reading from the same offset should produce the value that was written. - Added pci_cfg_rev_write. It takes a 32 bit value from offset 0, and modifies a specified number of bytes starting at a specified offset with the offset wrapping around to 0 if it exceeds 3. The modified bytes take their new values from the flipped bytes passed to pci_cfg_write. When size is 4, the original value is not used since all bytes will be modified. Basically, those two functions handle all the sizes and all the offsets and replace calls to BYTESWAP_32, read_mem or read_mem_rev, and write_mem or write_mem_rev. read_mem_rev, as it was used by pcidevice and some other places, could read beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always read the wrong byte or word if they were not at offset 0. Same for read_mem as used by mpc106. write_mem_rev, as it was used by pcidevice and some other places, could write beyond offset 3 if it were ever passed a reg_offs value that did not have offset as 0. Since the offset was always zero, it would always write the wrong byte or word if they were not at offset 0. Same for write_mem as used by mpc106. pcidevice: - The logging macros should be used to handle all config register access logging. - Unaligned PCI config register accesses will be output as ERROR instead of WARNING. - The logging macros include the offset and size. They also include the value for named registers or for writes. - Added MMIODevice read and write methods so that PCIDevice is not abstract if a PCIDevice doesn't override the read and write method since some PCIDevices don't have MMIO. pcihost: - Added pci_find_device stub for handling PCI bridges in future commit. bandit and mpc106: - PCI host controllers will handle all PCI config access alignment and sizing. A PCIDevice will always access config registers as 32 bits on a 4 byte boundary. The AccessDetails passed to a PCIDevice config read or write method is there only for logging purposes. bandit: - Common MMIO code is moved to new BanditHost class so both Bandit and Chaos can use it. PCI related code is moved to new BanditPCI class. - Simplify IDSEL to/from PCI device number conversion by removing the shift or subtract. - Remove BANDIT_ID_SEL check. The IDSEL conversion to PCI device number can find the bandit PCI device. - For logging, make best guess of PCI device number from invalid IDSEL - the result is always reasonable for device 0x00 to 0x0A when accessing config register 0x00 (as one would do when scanning for PCI devices like lspci does). mpc106: - Common config space code is put in cfg_setup. It handles extracting the offset. - Added code to log access to unimplemented config registers of grackle. - Don't call setup_ram when writing to config registers that setup_ram doesn't use. - pci_cfg_read calls READ_DWORD_LE_A and pci_cfg_write calls WRITE_DWORD_LE_A. When reading or writing memory that is organized as little endian dwords, such as my_pci_cfg_hdr of mpc106, the function should explicitly state that it's little endian so that the emulator may be ported one day to a CPU architecture that is not little endian. atirage: - The changes correctly place user_cfg at byte 0x40 instead of 0x43 and writes the correct byte depending on size and offset.
2022-09-02 10:32:28 +00:00
class Chaos : public BanditHost {
2022-08-06 17:29:45 +00:00
public:
Chaos(std::string name);
~Chaos() = default;
static std::unique_ptr<HWComponent> create() {
return std::unique_ptr<Chaos>(new Chaos("VCI0"));
};
};
#endif // BANDIT_PCI_H